Duncan Wood / UniGraphic

Basically i glued Peter Drescher and Simon Ford libs in a GraphicsDisplay class, then derived TFT or LCD class (which inherits Protocols class), then the most derived ones (Inits), which are per-display and are the only part needed to be adapted to diff hw.

Dependents:   Brew

Inits/UC1608.h@9:1749ae993cfe, 2015-02-17 (annotated)

Committer:
dreschpe
Date:
Tue Feb 17 22:35:07 2015 +0000
Revision:
9:1749ae993cfe
Parent:
1:ff019d22b275
Child:
18:ffa58f1a680a
Add param LCDSIZE_x, LCDSIZE_Y to constructor. They are optional.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Geremia 0:75ec1b3cde17 1 #ifndef MBED_UC1608_H
Geremia 0:75ec1b3cde17 2 #define MBED_UC1608_H
Geremia 0:75ec1b3cde17 3
Geremia 0:75ec1b3cde17 4
Geremia 0:75ec1b3cde17 5
Geremia 0:75ec1b3cde17 6 #include "mbed.h"
Geremia 0:75ec1b3cde17 7 #include "LCD.h"
Geremia 0:75ec1b3cde17 8
Geremia 0:75ec1b3cde17 9 /** Class for UC1608 display controller
Geremia 0:75ec1b3cde17 10 * to be copypasted and adapted for other controllers
Geremia 0:75ec1b3cde17 11 */
Geremia 0:75ec1b3cde17 12 class UC1608 : public LCD
Geremia 0:75ec1b3cde17 13 {
Geremia 0:75ec1b3cde17 14
Geremia 0:75ec1b3cde17 15 public:
Geremia 0:75ec1b3cde17 16
Geremia 1:ff019d22b275 17 /** Create a PAR display interface
Geremia 1:ff019d22b275 18 * @param displayproto only supports PAR_8
Geremia 0:75ec1b3cde17 19 * @param port GPIO port name to use
Geremia 0:75ec1b3cde17 20 * @param CS pin connected to CS of display
Geremia 0:75ec1b3cde17 21 * @param reset pin connected to RESET of display
Geremia 0:75ec1b3cde17 22 * @param DC pin connected to data/command of display
Geremia 0:75ec1b3cde17 23 * @param WR pin connected to SDI of display
Geremia 0:75ec1b3cde17 24 * @param RD pin connected to RS of display
Geremia 0:75ec1b3cde17 25 * @param name The name used by the parent class to access the interface
dreschpe 9:1749ae993cfe 26 * @param LCDSIZE_X x size in pixel - optional
dreschpe 9:1749ae993cfe 27 * @param LCDSIZE_Y y size in pixel - optional
Geremia 0:75ec1b3cde17 28 */
dreschpe 9:1749ae993cfe 29 UC1608(proto_t displayproto, PortName port, PinName CS, PinName reset, PinName DC, PinName WR, PinName RD, const char* name, unsigned int LCDSIZE_X = 240, unsigned int LCDSIZE_Y = 120);
Geremia 0:75ec1b3cde17 30
Geremia 1:ff019d22b275 31 /** Create an SPI display interface
Geremia 1:ff019d22b275 32 * @param displayproto only supports SPI_8
Geremia 1:ff019d22b275 33 * @param Hz SPI speed in Hz
Geremia 0:75ec1b3cde17 34 * @param mosi SPI pin
Geremia 0:75ec1b3cde17 35 * @param miso SPI pin
Geremia 0:75ec1b3cde17 36 * @param sclk SPI pin
Geremia 0:75ec1b3cde17 37 * @param CS pin connected to CS of display
Geremia 0:75ec1b3cde17 38 * @param reset pin connected to RESET of display
Geremia 0:75ec1b3cde17 39 * @param DC pin connected to data/command of display
Geremia 0:75ec1b3cde17 40 * @param name The name used by the parent class to access the interface
dreschpe 9:1749ae993cfe 41 * @param LCDSIZE_X x size in pixel - optional
dreschpe 9:1749ae993cfe 42 * @param LCDSIZE_Y y size in pixel - optional
Geremia 0:75ec1b3cde17 43 */
dreschpe 9:1749ae993cfe 44 UC1608(proto_t displayproto, int Hz, PinName mosi, PinName miso, PinName sclk, PinName CS, PinName reset, PinName DC, const char* name , unsigned int LCDSIZE_X = 240, unsigned int LCDSIZE_Y = 120);
Geremia 0:75ec1b3cde17 45
Geremia 0:75ec1b3cde17 46 /** set the contrast of the screen
Geremia 0:75ec1b3cde17 47 * @note here overrided because of not standard command
Geremia 0:75ec1b3cde17 48 * @param o contrast 0-63
Geremia 0:75ec1b3cde17 49 */
Geremia 0:75ec1b3cde17 50 virtual void set_contrast(int o);
Geremia 0:75ec1b3cde17 51
Geremia 0:75ec1b3cde17 52 /** Set ChipSelect high or low
Geremia 0:75ec1b3cde17 53 * @note here overriding the std one, cause CS inverted
Geremia 0:75ec1b3cde17 54 * @param enable 0/1
Geremia 0:75ec1b3cde17 55 */
Geremia 0:75ec1b3cde17 56 virtual void BusEnable(bool enable);
Geremia 0:75ec1b3cde17 57
Geremia 0:75ec1b3cde17 58 protected:
Geremia 0:75ec1b3cde17 59
Geremia 0:75ec1b3cde17 60
Geremia 0:75ec1b3cde17 61 /** Init command sequence
Geremia 0:75ec1b3cde17 62 */
Geremia 0:75ec1b3cde17 63 void init();
Geremia 0:75ec1b3cde17 64
Geremia 0:75ec1b3cde17 65 /** set mirror mode
Geremia 0:75ec1b3cde17 66 * @note here overriding the LCD class default one because of not standard commands
Geremia 0:75ec1b3cde17 67 * @param mode NONE, X, Y, XY
Geremia 0:75ec1b3cde17 68 */
Geremia 0:75ec1b3cde17 69 virtual void mirrorXY(mirror_t mode);
Geremia 0:75ec1b3cde17 70
Geremia 0:75ec1b3cde17 71
Geremia 0:75ec1b3cde17 72
Geremia 0:75ec1b3cde17 73
Geremia 0:75ec1b3cde17 74
Geremia 0:75ec1b3cde17 75 };
Geremia 0:75ec1b3cde17 76 #endif