Diff: M24512.h

Revision:

0:11e6262c2981

Child:

1:23935352bb22

diff -r 000000000000 -r 11e6262c2981 M24512.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/M24512.h	Fri Jun 07 14:45:45 2019 +0100
@@ -0,0 +1,151 @@
+/** ISL MBED Libraries
+ * Copyright (C) 2019 - Invisible Systems Ltd. All Rights Reserved.
+ *
+ * <b>         M24512.h</b>
+ * <p>         M24512 EEPROM Driver </p>
+ * @version    1.0.0
+ * @since      06 June 2019
+ * @author     Martyn Gilbertson
+ * <p>
+ *  v1.0.0   - 06 June 2019
+ *          [+] Initial release
+ * </p>
+ */
+#ifndef _M24512_H_
+#define _M24512_H_
+
+#include "mbed.h"
+
+
+/** Driver for reading and writing to M24512 eeprom
+ *
+ * Example:
+ * @code
+ * // Write "test" to page 0 and read back
+ * #include "M24512.h"
+ *
+ * M24512 eeprom(I2C_SDA, I2C_SCL);
+ *
+ * int main() {
+ * 	M24512::status_t ret;
+ * 	char data[32] = {'t','e','s','t'};
+ *
+ *	ret = eeprom.write(0, (char*)data, 4);
+ *	if ( ret != M24512::M24512_SUCCESS )
+ *	{
+ *		printf("Error writing this! %2.2X\n", ret );
+ *	}
+ *
+ *	memset( data, 0, sizeof(data) );
+ *	ret = eeprom.read(0, (char*)&data, 4);
+ *	if ( ret !=  M24512::M24512_SUCCESS )
+ *	{
+ *		printf("Error reading %2.2X!\n", ret );
+ *	}
+ *	printf("Read: %s\n", data );
+ *  return 0;
+ * }
+ * @endcode
+ */
+class M24512 : private NonCopyable<M24512>
+{
+
+	public:
+
+		 /** MBED uses 8 bit addressing so shift to 7bit
+		  *   Default value 0x50 is with address pins hi-z
+		  */
+		 #define M24512_DEFAULT_ADDRESS (uint8_t)(0x50 << 1)
+
+
+		/** Return values for each function
+	 	*/
+		typedef enum {
+			M24512_SUCCESS		= 0,
+			M24512_I2C_ERROR    = 1,
+			M24512_RDY_TIMEOUT  = 2,
+			M24512_MEM_OVERFLOW = 3
+		} status_t;
+
+
+		/** Initialise M24512 Interface
+		 *
+		 * @param sda  - I2C Data pin
+		 * @param scl  - I2C Clock pin
+		 * @param addr - Hardware address of device (defaults to 0x50)
+		 */
+		M24512(PinName sda, PinName scl, uint8_t address = M24512_DEFAULT_ADDRESS);
+
+
+		/** Destructor
+		 */
+		~M24512(void);
+
+
+		/** Read continuous from address
+		 *
+		 * @param addr  - address to start reading from
+		 * @param data  - pointer to data buffer (must be allocated)
+		 * @param size  - size of data to read back into data pointer
+		 */
+		status_t read(uint16_t addr,  char* data,  uint16_t size);
+
+
+		/** Write continuous to address
+		 *
+		 * @param addr  - address to start writing at
+		 * @param data  - pointer to data buffer must be allocated
+		 * @param size  - size of data to write
+		 */
+		status_t write(uint16_t addr, const char* data, uint16_t size);
+
+		/** Set the i2c frequency
+		 *
+		 * @param hz  - frequency in hertz
+		 */
+		void frequency(uint32_t hz);
+
+
+		/** Get page size
+		 */
+		uint16_t get_page_size() const;
+
+
+		/** Get page count
+		 */
+		uint16_t get_page_count() const;
+
+
+		/** Get memory size in KiB
+		 */
+		uint32_t get_total_memory() const;
+
+	private:
+
+        /*! i2c driver class */
+		I2C _i2c;
+
+        /*! memory address */
+		uint8_t _addr;
+
+
+	protected:
+
+        /** Write to single page
+         * @note  this will only write a maximum of %page_size%
+         *
+         * @param addr  - address to start writing at
+         * @param data  - pointer to data buffer must be allocated
+         * @param size  - size of data to write maximum %page_size%
+         */
+		status_t write_page(uint16_t addr, const char* data,  uint16_t size);
+
+        /** Check status of Memory chip after writing data
+         *
+         * @returns  -  @see status_t enum typedef
+         */
+		status_t ready(void);
+};
+
+#endif /* _M24512_H_ */
+