Diff: SPIFI.h

Revision:

8:fe3cb3fbb64e

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/SPIFI.h	Wed Dec 11 12:16:40 2013 +0000
@@ -0,0 +1,212 @@
+
+#ifndef SPIFI_H
+#define SPIFI_H
+
+#include "mbed.h"
+#include "spifi_rom_api.h"
+
+/**
+ * SPIFI Example
+ *
+ * @code
+ * #include "mbed.h"
+ * #include "SPIFI.h"
+ *
+ * int main(void) {
+ *    SPIFI::SpifiError err;
+ *
+ *    err = SPIFI::instance().init();
+ *    if (err != SPIFI::Ok) {
+ *        printf("Failed to initialize SPIFI, error %d\n", err);
+ *    }
+ *    
+ *    // Write "Hello World!" into the first bytes of the SPIFI
+ *    char buff[20] = "Hello World!";
+ *    err = SPIFI::instance().program(0, strlen(buff)+1, buff, SPIFI::EraseAsRequired);
+ *    if (err != SPIFI::Ok) {
+ *        printf("Failed to write to SPIFI, error %d\n", err);
+ *    }
+ *
+ *    // Now verify that it can be read
+ *    if (memcmp((char*)SPIFI::SpifiMemBase, buff, strlen(buff)+1) == 0) {
+ *        printf("Readback from memory OK: '%s'\n", SPIFI::SpifiMemBase);
+ *    } else {
+ *        printf("Spifi does not contain the correct data!\n");
+ *    }
+ * }
+ * @endcode
+ */
+class SPIFI {
+public:
+  
+    enum Constants {
+        SpifiMemBase = 0x28000000
+    };
+
+    enum Options {
+        ForceErase      = (0<<2),
+        EraseAsRequired = (1<<2),
+        CallerErase     = (1<<3)
+    };
+
+    enum SpifiError {
+        Ok            =       0,
+        Uninitialized =       1,
+        Verification  =       2,
+        SameAddress   =       3,
+        UnknownError  =       4,
+        InternalError = 0x20002,
+        Timeout       = 0x20003,
+        OperandError  = 0x20004,
+        Status        = 0x20005,
+        ExtDeviceId   = 0x20006,
+        DeviceId      = 0x20007,
+        DeviceType    = 0x20008,
+        Manufacturer  = 0x20009,
+        InvalidJDECId = 0x2000A,
+        EraseConflict = 0x2000B,
+    };
+    
+    enum Device {
+        Spansion_S25FL032, /* Manufacturer: 0x01, devType: 0x02, devID: 0x15 */
+        Winbond_W25Q64FV,  /* Manufacturer: 0xEF, devType: 0x40, devID: 0x17 */
+        UnknownDevice
+    };
+    
+    static SPIFI& instance()
+    {
+        static SPIFI singleton;
+        return singleton;
+    }
+  
+
+    /** Initializes the SPIFI ROM driver making the content of the external serial flash available
+     *
+     *  @returns
+     *       Ok on success
+     *       An error code on failure
+     */
+    SpifiError init();
+  
+    /** Returns the detected external serial flash
+     *
+     *  @returns
+     *       The detected device or UnknownDevice
+     */
+    Device device() { return _device; }
+  
+    /** Returns the size (in bytes) of the external serial flash
+     *
+     *  @returns
+     *       The size in bytes
+     */
+    uint32_t memorySize() { return _memorySize; }
+  
+    /** Returns the size of an erase block (in bytes) on the external serial flash
+     *
+     *  @returns
+     *       The erase block size in bytes
+     */
+    uint32_t eraseBlockSize() { return _eraseBlockSize; }
+  
+    /** Returns the address where the verifcation failed. Use only after a Verification error code 
+     * has been retured from one of the other functions
+     *
+     *  @returns
+     *       The address to where the program or erase operation failed
+     */
+    uint32_t getVerificationErrorAddr() { return _verError; }
+    
+    /** Used by the QSPIFileSystem class to get access to all spifi internal data.
+     *
+     *  @param initData  The parameter returned by spifi_init
+     *  @param romPtr    The location of the SPIFI ROM driver in memory
+     */
+    void internalData(SPIFIobj** initData, const SPIFI_RTNS** romPtr) { *initData = _romData; *romPtr = _spifi; }
+  
+    /** Copies len data from src to dest. This function will split len > 256 into writes of 256 bytes each.
+     *
+     * Programming means that a bit can either be left at 0, or programmed from 1 to 0. Changing bits from 0 to 1 requires an erase operation.
+     * While bits can be individually programmed from 1 to 0, erasing bits from 0 to 1 must be done in larger chunks (manufacturer dependant 
+     * but typically 4Kbyte to 64KByte at a time).
+     *
+     * Specify how/when erasing is done with the options parameter:
+     *
+     *    - ForceErase causes len bytes to be erased starting at dest. If a scratch buffer (must be the size of an erase block) is
+     *      provided then only the len bytes will be erased. If no scratch buffer is provided then the erase block surrounding
+     *      dest will be erased. 
+     * 
+     *    - EraseAsRequired tests if the destination can be written to without erasing. If it can then no erasing is done. If it 
+     *      can't then behaviour is the same as if ForceErase was specified. 
+     * 
+     *    - CallerErase tests if the destination can be written to without erasing. If it can then a data is written. If it 
+     *      can't then an error code is returned and nothing is written. 
+     *
+     * Scratch should be NULL or the address of an area of RAM that the SPIFI driver can use 
+     * to save data during erase operations. If provided, the scratch area should be as large 
+     * as the smallest erase size that is available throughout the serial flash device. If scratch 
+     * is NULL (zero) and an erase is necessary, any bytes in the first erase block before dest 
+     * are left in erased state (all ones), as are any bytes in the last erase block after dest + len
+     *
+     *  @param dest      Address to write to, highest byte must be 0x00 or 0x28 as in 0x28000000
+     *  @param len       Number of bytes to write
+     *  @param src       Data to write
+     *  @param options   How to handle content of destination
+     *  @param verify    Should all writes be verified or not
+     *  @param scratch   Used with ForceErase and EraseAsRequired option to preserve content of flash outside of
+     *                   written area. Size of buffer must be at least the size of one erase block.
+     *
+     *  @returns
+     *       Ok on success
+     *       An error code on failure
+     */
+    SpifiError program(uint32_t dest, unsigned len, char* src, Options options, bool verify=false, char* scratch=NULL);
+  
+    /** Erases the content of the memory at the specified address
+     *
+     * Scratch should be NULL or the address of an area of RAM that the SPIFI driver can use 
+     * to save data during erase operations. If provided, the scratch area should be as large 
+     * as the smallest erase size that is available throughout the serial flash device. If scratch 
+     * is NULL (zero) and an erase is necessary, any bytes in the first erase block before dest 
+     * are left in erased state (all ones), as are any bytes in the last erase block after dest + len
+     *
+     *  @param dest      Address to start erasing at, highest byte must be 0x00 or 0x28 as in 0x28000000
+     *  @param len       Number of bytes to erase
+     *  @param verify    Should the erased area be verified to make sure it is all 0xff
+     *  @param scratch   Used to preserve content of flash outside of erased area. 
+     *                   Size of buffer must be at least the size of one erase block.
+     *
+     *  @returns
+     *       Ok on success
+     *       An error code on failure
+     */
+    SpifiError erase(uint32_t dest, unsigned len, char* src, bool verify=false, char* scratch=NULL);
+  
+
+private:
+
+    uint32_t _verError;
+    
+    bool _initialized;
+    
+    Device _device;
+    uint32_t _memorySize;
+    uint32_t _eraseBlockSize;
+
+    SPIFIobj* _romData;
+    const SPIFI_RTNS* _spifi;
+
+    char _addrConflictBuff[256];
+
+    explicit SPIFI();
+    // hide copy constructor
+    SPIFI(const SPIFI&);
+    // hide assign operator
+    SPIFI& operator=(const SPIFI&);
+    ~SPIFI();
+
+    SpifiError translateError(int err, bool verify = false);
+};
+
+#endif
+