Matt Lloyd / Mbed 2 deprecated DMA_UART_example

Example of UART-DMA transfers taken form the npx cmsis driver libary

Dependencies:   mbed

Embed: (wiki syntax)

« Back to documentation index

lpc17xx_pinsel.c File Reference
Functions

lpc17xx_pinsel.c File Reference

Contains all functions support for Pin connect block firmware library on LPC17xx. More...

Go to the source code of this file.

Functions

static void set_PinFunc (uint8_t portnum, uint8_t pinnum, uint8_t funcnum)
 Setup the pin selection function.
static void set_ResistorMode (uint8_t portnum, uint8_t pinnum, uint8_t modenum)
 Setup resistor mode for each pin.
static void set_OpenDrainMode (uint8_t portnum, uint8_t pinnum, uint8_t modenum)
 Setup Open drain mode for each pin.
void PINSEL_ConfigTraceFunc (FunctionalState NewState)
 Configure trace function.
void PINSEL_SetI2C0Pins (uint8_t i2cPinMode, FunctionalState filterSlewRateEnable)
 Setup I2C0 pins.
void PINSEL_ConfigPin (PINSEL_CFG_Type *PinCfg)
 Configure Pin corresponding to specified parameters passed in the PinCfg.

Detailed Description

Contains all functions support for Pin connect block firmware library on LPC17xx.

Version:
2.0
Date:
21. May. 2010
Author:
NXP MCU SW Application Team

Software that is described herein is for illustrative purposes only which provides customers with programming information regarding the products. This software is supplied "AS IS" without any warranties. NXP Semiconductors assumes no responsibility or liability for the use of the software, conveys no license or title under any patent, copyright, or mask work right to the product. NXP Semiconductors reserves the right to make changes in the software without notification. NXP Semiconductors also make no representation or warranty that such application will be suitable for the specified use without further testing or modification.

Definition in file lpc17xx_pinsel.c.

Generated on Tue Jul 12 2022 10:57:55 by  doxygen 1.7.2