Diff: pal/Test/Scripts/mbed.py

Revision:

0:06ee5f8a484a

diff -r 000000000000 -r 06ee5f8a484a pal/Test/Scripts/mbed.py
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/pal/Test/Scripts/mbed.py	Sat Mar 18 22:37:16 2017 +0000
@@ -0,0 +1,328 @@
+# -----------------------------------------------------------------------
+# Copyright (c) 2016 ARM Limited. All rights reserved.
+# SPDX-License-Identifier: Apache-2.0
+# Licensed under the Apache License, Version 2.0 (the License); you may
+# not use this file except in compliance with the License.
+# You may obtain a copy of the License at
+#
+# http://www.apache.org/licenses/LICENSE-2.0
+#
+# Unless required by applicable law or agreed to in writing, software
+# distributed under the License is distributed on an AS IS BASIS, WITHOUT
+# WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+# See the License for the specific language governing permissions and
+# limitations under the License.
+# -----------------------------------------------------------------------
+
+import os
+import shutil
+from time import sleep, strftime
+import serial
+import re
+import sys
+
+
+class MbedDeviceManager:
+    def __init__(self):
+        try:
+            import mbed_lstools
+        except ImportError, e:
+            print("Error: Can't import 'mbed_lstools' module: %s"% e)
+        mbed = mbed_lstools.create()
+        self.mbed_list = mbed.list_mbeds()
+        for dev in self.mbed_list:
+            dev['Available'] = True
+            # part. structure:{'mount_point': 'D:','serial_port': u'COM3','platform_name': 'LPC1768','Available'=True}
+
+    def dump_all_devices(self):
+        print("dump Devices:")
+        print(self.mbed_list)
+
+
+    def get_device(self, platform_type):
+        found = False
+        index = int(-1)
+        mount_point = None
+        serial_port = None
+        print(platform_type)
+        for idx,dev in enumerate(self.mbed_list):
+            if dev['platform_name'] == platform_type:
+                found = True
+                if dev['platform_name'] == platform_type and dev['Available']:
+                    mount_point = dev['mount_point']
+                    serial_port = dev['serial_port']
+                    print('Detected %s. Mount point %s Serial port %s index %s.'
+                                % (platform_type, mount_point, serial_port, idx))
+                    dev['Available'] = False
+                    return idx, mount_point, serial_port
+        if found:
+            print('Device %s is not available already in use.' %platform_type)
+        else:
+            print('Device %s is not found.' %platform_type)
+        return index, mount_point, serial_port
+
+    def free_device(self, index):
+        dev = self.mbed_list[index]
+        if not dev['Available']:
+            dev['Available'] = True
+            print('Release Device %s : %s .' % (index, dev['platform_name']))
+        else:
+            print('Error: Device %s : %s is already free.' % (index, dev['platform_name']), )
+
+mbed_manager = MbedDeviceManager()
+
+class MBED:
+    def __init__(self,platform_type):
+        self.manager = mbed_manager
+        self.platform_type = platform_type
+        self.mount_point = None
+        self.serial_port = None
+        self.index = -1
+        self.running = False
+
+    def detect(self):
+        self.index, self.mount_point, self.serial_port = self.manager.get_device(self.platform_type)
+        if self.index >= 0:
+            return True
+        else:
+            return False
+
+    def generic_mbed_copy_win(self, source, destination):
+
+
+        from win32com.shell import shell, shellcon
+        import pythoncom
+        from os.path import abspath, join
+        from glob import glob
+
+        for f in glob(join(destination, '*.bin')):
+            os.unlink(f)
+
+        src = shell.SHCreateItemFromParsingName(source, None, shell.IID_IShellItem)
+        dest_dir = shell.SHCreateItemFromParsingName(
+            abspath(destination),
+            None,
+            shell.IID_IShellItem
+        )
+        pfo = pythoncom.CoCreateInstance(
+            shell.CLSID_FileOperation,
+            None,
+            pythoncom.CLSCTX_ALL,
+            shell.IID_IFileOperation
+        )
+        pfo.SetOperationFlags(shellcon.FOF_NO_UI)
+        pfo.CopyItem(src, dest_dir, None, None)
+        pfo.PerformOperations()
+
+        return True
+
+    def install_bin(self,bin_file_name):
+        bin_on_mbed = os.path.join(self.mount_point,os.path.basename(bin_file_name))
+        print('%s Copying %s --> %s' %(strftime('%H:%M:%S'),bin_file_name,bin_on_mbed))
+        if 'win' in sys.platform:
+            self.generic_mbed_copy_win(os.path.abspath(bin_file_name), os.path.abspath(self.mount_point))
+        else:
+            shutil.copyfile(bin_file_name,bin_on_mbed)
+        self.wait_for_file_system()
+        print('%s Bin installation complete' %strftime('%H:%M:%S'))
+
+    def run(self,serial_capture_file_name,baud=9600,read_timeout=10,stop_on_serial_read_timeout=False):
+        if serial_capture_file_name is not None:
+            self.stop_on_serial_read_timeout = stop_on_serial_read_timeout
+            from multiprocessing import Process, Event, Pipe
+            self.event = Event()
+            parent_conn, child_conn = Pipe()
+            print('Start serial capture process')
+            process_args=(self.serial_port,baud,read_timeout,serial_capture_file_name,stop_on_serial_read_timeout,self.event,child_conn)
+            self.capture_process = Process(target=capture_serial,args=process_args)
+            self.capture_process.start()
+            print('Waiting for pipe input from subprocess')
+            self.ip,self.port = parent_conn.recv()
+            if not self.port or not self.ip :
+                return 1
+
+            print('Received IP %s port %s'%(self.ip,self.port))
+        else:
+            print('Running without serial capture')
+            self.ip,self.port = run_no_capture(self.serial_port,baud,read_timeout)
+            print('%s IP %s port %s' % (self.platform_type, self.ip, self.port))
+        self.running = True
+
+    def end_run(self, delete_binaries=True, release_manager=True):
+        print('MBED end_run')
+        if self.running:
+            if not self.stop_on_serial_read_timeout:
+                self.event.set() # the thread does not stop on its own. send stop signal
+            print('MBED end_run waiting for subprocess to terminate')
+            self.capture_process.join() # wait for completion
+            print('MBED end_run subprocess terminated')
+            if delete_binaries:
+                print('MBED end_run deleting binaries')
+                # delete all binaries on MBED
+                filelist = [ f for f in os.listdir(self.mount_point) if f.endswith(".bin") ]
+                for f in filelist:
+                    print('MBED end_run delete %s',f)
+                    os.remove(os.path.join(self.mount_point,f))
+                self.wait_for_file_system()
+                print('MBED end_run binary delete completed')
+            self.running = False
+        if release_manager:
+            self.manager.free_device(self.index)
+
+    def run_and_capture_till_timeout(self,serial_capture_file_name,baud=9600,read_timeout=10,endOfData=None):
+        try:
+            print('[%s run_and_capture_till_timeout] Start' %strftime('%H:%M:%S'))
+            ser = serial.Serial(self.serial_port,baudrate=baud,timeout=read_timeout)
+            if ser == None:
+                print(' serial.Serial returned None..')
+            capture_file = open(serial_capture_file_name,'w')
+            read_size = 1000
+            cont = True
+            print('[%s run_and_capture_till_timeout] Reseting device..' %strftime('%H:%M:%S'))
+            c = reset_mbed(ser)
+            if c == None:
+                cont = False
+            else:
+                capture_file.write(c)
+            print('[%s run_and_capture_till_timeout] capturing to file...' %strftime('%H:%M:%S'))
+            while cont:
+                c = ser.read(read_size)
+                # Look for the end of test data string and terminate if it is found.
+                if endOfData != None:
+                    endPos = c.find(endOfData)
+                # Clip off the termination string and anything afterwards
+                    if endPos != -1:
+                        c = c[:(endPos + len(endOfData))]
+                capture_file.write(c)
+                if endPos != -1:
+                    break
+                if len(c) < read_size:
+                    print('[%s run_and_capture_till_timeout] serial read timeout. Stopping subprocess' %strftime('%H:%M:%S'))
+                    print ("exit last Buffsize " + str(len(c)) + "<32" )
+                    cont = False
+            print('[%s run_and_capture_till_timeout] closing capture file' %strftime('%H:%M:%S'))
+            capture_file.close()
+            print('[%s run_and_capture_till_timeout] closing serial port' %strftime('%H:%M:%S'))
+            ser.flushInput()
+            ser.flushOutput()
+            ser.close()
+            print('[%s run_and_capture_till_timeout] done' %strftime('%H:%M:%S'))
+            return True
+        except serial.SerialException as e:
+            print('[run_and_capture_till_timeout] serial exception',e)
+            return False
+        
+    def wait_for_file_system(self):
+        #sleep(25) #MBED file system takes some 'settling' time after it is wrirtten to
+        sleep(3) #MBED file system takes some 'settling' time after it is wrirtten to
+
+def reset_mbed(ser):
+    for loop in range(5):
+        # reset called after open port
+        # add sleep for port ready (we saw that sometimes read failed...)
+        delay = 5
+        print('[%s reset_mbed] loop=%d , delay=%d' %(strftime('%H:%M:%S'), loop, delay))
+        sleep(delay)
+        try:
+            ser.sendBreak()
+        except Exception:
+            # In linux a termios.error is raised in sendBreak and in
+            # setBreak. The following setBreak() is needed to release
+            # the reset signal on the target mcu.
+            try:
+                ser.setBreak(False)
+            except:
+                pass
+        c = ser.read(1)
+        if len(c) == 1:
+            return c
+    print ("Error reading from serial port" )
+    return None
+
+def is_valid_ip(ip):
+    return re.match(r"^\d{1,3}\.\d{1,3}\.\d{1,3}\.\d{1,3}$",ip)
+
+def capture_serial(port,baud,read_timeout,capture_file_name,stop_on_serial_read_timeout,event,pipe_conn):
+    try:
+        print('[capture_serial subprocess] starting..')
+        ser = serial.Serial(port,baudrate=baud,timeout=read_timeout)
+        capture_file = open(capture_file_name,'w')
+        read_size = 32
+        cont = True
+        print('[capture_serial subprocess] Reseting device..')
+        c = reset_mbed(ser)
+        if c == None:
+           print('[capture_serial subprocess] Reseting device failed')
+
+        if c == None:
+            cont = False
+            print('[capture_serial subprocess] Failed to get IP from device... exiting ')
+            pipe_conn.send([None,None]) # send IP and port
+            pipe_conn.close()
+            capture_file.close()
+            ser.flushInput()
+            ser.flushOutput()
+            ser.close()
+            return 
+        else:
+            # parse the first received string for IP and port
+            ip_str = c.split(':')
+            if is_valid_ip(ip_str[1]) :
+                pipe_conn.send([ip_str[1],ip_str[2]]) # send IP and port
+                print('[capture_serial subprocess] Sending IP to main process %s:%s'%(ip_str[1],ip_str[2]))
+                print('[capture_serial subprocess] capturing to file...')
+            else:
+                print('[capture_serial subprocess] No valid IP address')
+                pipe_conn.send([None,None]) # send IP and port
+                cont = False
+            capture_file.write(c)
+        pipe_conn.close()
+
+        while cont:
+            c = ser.read(read_size)
+            capture_file.write(c)
+            if stop_on_serial_read_timeout:
+                if len(c) < read_size:
+                    print('[capture_serial subprocess] serial read timeout. Stopping subprocess')
+                    cont = False
+            else:
+                if event.is_set():
+                    print('[capture_serial subprocess] event is set. Stopping subprocess')
+                    cont = False
+
+        print('[capture_serial subprocess] closing capture file')
+        capture_file.close()
+        print('[capture_serial subprocess] closing serial port')
+        ser.flushInput()
+        ser.flushOutput()
+        ser.close()
+        print('[capture_serial subprocess] Subprocess exiting')
+    except serial.SerialException as e:
+        print('[capture_serial subprocess] serial exception',e)
+
+def run_no_capture(port,baud,read_timeout):
+    try:
+        ser = serial.Serial(port,baudrate=baud,timeout=read_timeout)
+        ip = None
+        port = None
+        c = reset_mbed(ser)
+        if c:
+            # parse the first received string for IP and port
+            ip_str = c.split(':')
+            if is_valid_ip(ip_str[1]) != None:
+                ip = ip_str[1]
+                port = ip_str[2]
+        ser.flushInput()
+        ser.flushOutput()
+        ser.close()
+        return ip,port
+    except serial.SerialException as e:
+        print e
+
+
+class MBED_DEVICE(MBED):
+    def __init__(self,platform_type):
+        print('MBED Device:' + platform_type)
+        MBED.__init__(self, platform_type)
+
+