David Bottrill
MIDI Stop Controller V1.0 suitable for driving Hauptwerk digital organ software. Written for the KL25Z uses BusInOut and will drive up to 16 illuminated push buttons each switch uses a single I/O pin to both drive the LED and act as a switch input. Pressing a button will alternately send MIDI note on / off messages and turn the LED on or off. If corresponding MIDI note on/off messages are received these will be used to drive the LEDs in preference to the locally generated LED signals. The MIDI channel used to send can be selected by jumpers on 4 pins of the J2 header.
Diff: USBDevice/USBEndpoints_LPC11U.h
- Revision:
- 0:aac55e1fc12f
diff -r 000000000000 -r aac55e1fc12f USBDevice/USBEndpoints_LPC11U.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBDevice/USBEndpoints_LPC11U.h Sat Sep 14 21:32:06 2013 +0000 @@ -0,0 +1,65 @@ +/* Copyright (c) 2010-2011 mbed.org, MIT License +* +* Permission is hereby granted, free of charge, to any person obtaining a copy of this software +* and associated documentation files (the "Software"), to deal in the Software without +* restriction, including without limitation the rights to use, copy, modify, merge, publish, +* distribute, sublicense, and/or sell copies of the Software, and to permit persons to whom the +* Software is furnished to do so, subject to the following conditions: +* +* The above copyright notice and this permission notice shall be included in all copies or +* substantial portions of the Software. +* +* THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED, INCLUDING +* BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND +* NONINFRINGEMENT. IN NO EVENT SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, +* DAMAGES OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM, +* OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN THE SOFTWARE. +*/ + +#define NUMBER_OF_LOGICAL_ENDPOINTS (5) +#define NUMBER_OF_PHYSICAL_ENDPOINTS (NUMBER_OF_LOGICAL_ENDPOINTS * 2) + +/* Define physical endpoint numbers */ + +/* Endpoint No. Type(s) MaxPacket DoubleBuffer */ +/* ---------------- ------------ ---------- --- */ +#define EP0OUT (0) /* Control 64 No */ +#define EP0IN (1) /* Control 64 No */ +#define EP1OUT (2) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP1IN (3) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP2OUT (4) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP2IN (5) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP3OUT (6) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP3IN (7) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP4OUT (8) /* Int/Bulk/Iso 64/64/1023 Yes */ +#define EP4IN (9) /* Int/Bulk/Iso 64/64/1023 Yes */ + +/* Maximum Packet sizes */ + +#define MAX_PACKET_SIZE_EP0 (64) +#define MAX_PACKET_SIZE_EP1 (64) /* Int/Bulk */ +#define MAX_PACKET_SIZE_EP2 (64) /* Int/Bulk */ +#define MAX_PACKET_SIZE_EP3 (64) /* Int/Bulk */ +#define MAX_PACKET_SIZE_EP4 (64) /* Int/Bulk */ + +#define MAX_PACKET_SIZE_EP1_ISO (1023) /* Isochronous */ +#define MAX_PACKET_SIZE_EP2_ISO (1023) /* Isochronous */ +#define MAX_PACKET_SIZE_EP3_ISO (1023) /* Isochronous */ +#define MAX_PACKET_SIZE_EP4_ISO (1023) /* Isochronous */ + +/* Generic endpoints - intended to be portable accross devices */ +/* and be suitable for simple USB devices. */ + +/* Bulk endpoint */ +#define EPBULK_OUT (EP2OUT) +#define EPBULK_IN (EP2IN) +/* Interrupt endpoint */ +#define EPINT_OUT (EP1OUT) +#define EPINT_IN (EP1IN) +/* Isochronous endpoint */ +#define EPISO_OUT (EP3OUT) +#define EPISO_IN (EP3IN) + +#define MAX_PACKET_SIZE_EPBULK (MAX_PACKET_SIZE_EP2) +#define MAX_PACKET_SIZE_EPINT (MAX_PACKET_SIZE_EP1) +#define MAX_PACKET_SIZE_EPISO (MAX_PACKET_SIZE_EP3_ISO)