Stephen Dickey
This example establishes a transparent link between the mbed seial port and the gps on the C027. You can use it to use the standard u-blox tools such as u-center. These tools can then connect to the serial port and talk directly to the GPS receiver. Baudrate should be set to 9600 baud and is fixed. m-center can be downloaded from u-blox website following this link: http://www.u-blox.com/en/evaluation-tools-a-software/u-center/u-center.html
Fork of
C027_GPSTransparentSerial
by 
u-blox
History
Just update the library.
2013-12-15, by dixter1 [Sun, 15 Dec 2013 22:06:01 +0000] rev 4
Just update the library.
First Pass GPS Test for RevB Hardware. No significant change from original, just updated to RevB C027 Library.
2013-12-14, by dixter1 [Sat, 14 Dec 2013 02:03:29 +0000] rev 3
First Pass GPS Test for RevB Hardware. No significant change from original, just updated to RevB C027 Library.
use latest C027 library
2013-11-06, by mazgch [Wed, 06 Nov 2013 10:49:23 +0000] rev 2
use latest C027 library
use power config
2013-10-25, by mazgch [Fri, 25 Oct 2013 20:36:35 +0000] rev 1
use power config
Simple transparent serial port to the gps receiver,
2013-10-22, by mazgch [Tue, 22 Oct 2013 21:21:46 +0000] rev 0
Simple transparent serial port to the gps receiver,