Stephen Dickey / Mbed 2 deprecated C027_GPSTransparentSerial_revb

This example establishes a transparent link between the mbed seial port and the gps on the C027. You can use it to use the standard u-blox tools such as u-center. These tools can then connect to the serial port and talk directly to the GPS receiver. Baudrate should be set to 9600 baud and is fixed. m-center can be downloaded from u-blox website following this link: http://www.u-blox.com/en/evaluation-tools-a-software/u-center/u-center.html

Dependencies:   C027-REVB mbed

Fork of C027_GPSTransparentSerial by u-blox

main.cpp@1:0d32baf4a645, 2013-10-25 (annotated)

Committer:
mazgch
Date:
Fri Oct 25 20:36:35 2013 +0000
Revision:
1:0d32baf4a645
Parent:
0:7f124c0a351a
Child:
2:490b4b087576
use power config

Who changed what in which revision?

UserRevisionLine numberNew contents of line
mazgch 0:7f124c0a351a 1 #include "mbed.h"
mazgch 1:0d32baf4a645 2 #include "C027.h"
mazgch 0:7f124c0a351a 3
mazgch 0:7f124c0a351a 4 int main()
mazgch 0:7f124c0a351a 5 {
mazgch 1:0d32baf4a645 6 C027 c027;
mazgch 1:0d32baf4a645 7 c027.gpsPower(true);
mazgch 1:0d32baf4a645 8
mazgch 0:7f124c0a351a 9 // open the gps serial port
mazgch 0:7f124c0a351a 10 Serial gps(GPSTXD, GPSRXD);
mazgch 0:7f124c0a351a 11 gps.baud(GPSBAUD);
mazgch 0:7f124c0a351a 12
mazgch 0:7f124c0a351a 13 // open the PC serial port and (use the same baudrate)
mazgch 0:7f124c0a351a 14 Serial pc(USBTX, USBRX);
mazgch 0:7f124c0a351a 15 pc.baud(GPSBAUD);
mazgch 0:7f124c0a351a 16
mazgch 0:7f124c0a351a 17 while (1)
mazgch 0:7f124c0a351a 18 {
mazgch 0:7f124c0a351a 19 // transfer data from pc to gps
mazgch 0:7f124c0a351a 20 if (pc.readable() && gps.writeable())
mazgch 0:7f124c0a351a 21 gps.putc(pc.getc());
mazgch 0:7f124c0a351a 22 // transfer data from gps to pc
mazgch 0:7f124c0a351a 23 if (gps.readable() && pc.writeable())
mazgch 0:7f124c0a351a 24 pc.putc(gps.getc());
mazgch 0:7f124c0a351a 25 }
mazgch 0:7f124c0a351a 26 }