Diltech RM Consultant
Test pour écran OLED 128 x 64 SSD1306 avec sonde thermique DS18B20
BUILD/NUCLEO_F103RB/ARMC6/mbed_config.h
- Committer:
- diltech
- Date:
- 2022-05-28
- Revision:
- 0:8ae2868c8c6c
File content as of revision 0:8ae2868c8c6c:
/*
* mbed SDK
* Copyright (c) 2017 ARM Limited
*
* Licensed under the Apache License, Version 2.0 (the "License");
* you may not use this file except in compliance with the License.
* You may obtain a copy of the License at
*
* http://www.apache.org/licenses/LICENSE-2.0
*
* Unless required by applicable law or agreed to in writing, software
* distributed under the License is distributed on an "AS IS" BASIS,
* WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
* See the License for the specific language governing permissions and
* limitations under the License.
*/
// Automatically generated configuration file.
// DO NOT EDIT, content will be overwritten.
#ifndef __MBED_CONFIG_DATA__
#define __MBED_CONFIG_DATA__
// Configuration parameters
#define CLOCK_SOURCE USE_PLL_HSE_EXTC|USE_PLL_HSE_XTAL|USE_PLL_HSI // set by target:MCU_STM32F1
#define LPTICKER_DELAY_TICKS 1 // set by target:MCU_STM32
#define MBED_CONF_ALT1250_PPP_BAUDRATE 115200 // set by library:ALT1250_PPP
#define MBED_CONF_ALT1250_PPP_PROVIDE_DEFAULT 0 // set by library:ALT1250_PPP
#define MBED_CONF_ATMEL_RF_ASSUME_SPACED_SPI 1 // set by library:atmel-rf[STM]
#define MBED_CONF_ATMEL_RF_FULL_SPI_SPEED 7500000 // set by library:atmel-rf
#define MBED_CONF_ATMEL_RF_FULL_SPI_SPEED_BYTE_SPACING 250 // set by library:atmel-rf
#define MBED_CONF_ATMEL_RF_IRQ_THREAD_STACK_SIZE 1024 // set by library:atmel-rf
#define MBED_CONF_ATMEL_RF_LOW_SPI_SPEED 3750000 // set by library:atmel-rf
#define MBED_CONF_ATMEL_RF_PROVIDE_DEFAULT 0 // set by library:atmel-rf
#define MBED_CONF_ATMEL_RF_USE_SPI_SPACING_API 0 // set by library:atmel-rf
#define MBED_CONF_CELLULAR_AT_HANDLER_BUFFER_SIZE 32 // set by library:cellular
#define MBED_CONF_CELLULAR_CONTROL_PLANE_OPT 0 // set by library:cellular
#define MBED_CONF_CELLULAR_DEBUG_AT 0 // set by library:cellular
#define MBED_CONF_CELLULAR_MAX_CP_DATA_RECV_LEN 1358 // set by library:cellular
#define MBED_CONF_CELLULAR_PRESENT 1 // set by library:cellular
#define MBED_CONF_CELLULAR_RANDOM_MAX_START_DELAY 0 // set by library:cellular
#define MBED_CONF_CELLULAR_USE_APN_LOOKUP 0 // set by library:cellular
#define MBED_CONF_CELLULAR_USE_SMS 0 // set by library:cellular
#define MBED_CONF_DRIVERS_OSPI_CSN OSPI_FLASH1_CSN // set by library:drivers
#define MBED_CONF_DRIVERS_OSPI_DQS OSPI_FLASH1_DQS // set by library:drivers
#define MBED_CONF_DRIVERS_OSPI_IO0 OSPI_FLASH1_IO0 // set by library:drivers
#define MBED_CONF_DRIVERS_OSPI_IO1 OSPI_FLASH1_IO1 // set by library:drivers
#define MBED_CONF_DRIVERS_OSPI_IO2 OSPI_FLASH1_IO2 // set by library:drivers
#define MBED_CONF_DRIVERS_OSPI_IO3 OSPI_FLASH1_IO3 // set by library:drivers
#define MBED_CONF_DRIVERS_OSPI_IO4 OSPI_FLASH1_IO4 // set by library:drivers
#define MBED_CONF_DRIVERS_OSPI_IO5 OSPI_FLASH1_IO5 // set by library:drivers
#define MBED_CONF_DRIVERS_OSPI_IO6 OSPI_FLASH1_IO6 // set by library:drivers
#define MBED_CONF_DRIVERS_OSPI_IO7 OSPI_FLASH1_IO7 // set by library:drivers
#define MBED_CONF_DRIVERS_OSPI_SCK OSPI_FLASH1_SCK // set by library:drivers
#define MBED_CONF_DRIVERS_QSPI_CSN QSPI_FLASH1_CSN // set by library:drivers
#define MBED_CONF_DRIVERS_QSPI_IO0 QSPI_FLASH1_IO0 // set by library:drivers
#define MBED_CONF_DRIVERS_QSPI_IO1 QSPI_FLASH1_IO1 // set by library:drivers
#define MBED_CONF_DRIVERS_QSPI_IO2 QSPI_FLASH1_IO2 // set by library:drivers
#define MBED_CONF_DRIVERS_QSPI_IO3 QSPI_FLASH1_IO3 // set by library:drivers
#define MBED_CONF_DRIVERS_QSPI_SCK QSPI_FLASH1_SCK // set by library:drivers
#define MBED_CONF_DRIVERS_UART_SERIAL_RXBUF_SIZE 256 // set by library:drivers
#define MBED_CONF_DRIVERS_UART_SERIAL_TXBUF_SIZE 256 // set by library:drivers
#define MBED_CONF_ESP8266_BUILT_IN_DNS 0 // set by library:esp8266
#define MBED_CONF_ESP8266_DEBUG 0 // set by library:esp8266
#define MBED_CONF_ESP8266_POWER_OFF_TIME_MS 3 // set by library:esp8266
#define MBED_CONF_ESP8266_POWER_ON_POLARITY 0 // set by library:esp8266
#define MBED_CONF_ESP8266_POWER_ON_TIME_MS 3 // set by library:esp8266
#define MBED_CONF_ESP8266_PROVIDE_DEFAULT 0 // set by library:esp8266
#define MBED_CONF_ESP8266_SERIAL_BAUDRATE 115200 // set by library:esp8266
#define MBED_CONF_ESP8266_SNTP_ENABLE 0 // set by library:esp8266
#define MBED_CONF_ESP8266_SNTP_SERVER0 "" // set by library:esp8266
#define MBED_CONF_ESP8266_SNTP_SERVER1 "" // set by library:esp8266
#define MBED_CONF_ESP8266_SNTP_SERVER2 "" // set by library:esp8266
#define MBED_CONF_ESP8266_SNTP_TIMEZONE 0 // set by library:esp8266
#define MBED_CONF_ESP8266_SOCKET_BUFSIZE 8192 // set by library:esp8266
#define MBED_CONF_EVENTS_PRESENT 1 // set by library:events
#define MBED_CONF_EVENTS_SHARED_DISPATCH_FROM_APPLICATION 0 // set by library:events
#define MBED_CONF_EVENTS_SHARED_EVENTSIZE 768 // set by library:events
#define MBED_CONF_EVENTS_SHARED_HIGHPRIO_EVENTSIZE 256 // set by library:events
#define MBED_CONF_EVENTS_SHARED_HIGHPRIO_STACKSIZE 1024 // set by library:events
#define MBED_CONF_EVENTS_SHARED_STACKSIZE 2048 // set by library:events
#define MBED_CONF_EVENTS_USE_LOWPOWER_TIMER_TICKER 0 // set by library:events
#define MBED_CONF_FAT_CHAN_FFS_DBG 0 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_CODE_PAGE 437 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_FS_EXFAT 0 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_FS_HEAPBUF 1 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_FS_LOCK 0 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_FS_MINIMIZE 0 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_FS_NOFSINFO 0 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_FS_NORTC 0 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_FS_READONLY 0 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_FS_REENTRANT 0 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_FS_RPATH 1 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_FS_TIMEOUT 1000 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_FS_TINY 1 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_LFN_BUF 255 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_LFN_UNICODE 0 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_MAX_LFN 255 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_MAX_SS 4096 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_MIN_SS 512 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_MULTI_PARTITION 0 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_NORTC_MDAY 1 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_NORTC_MON 1 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_NORTC_YEAR 2017 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_PRINT_FLOAT 0 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_PRINT_LLI 0 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_SFN_BUF 12 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_STRF_ENCODE 3 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_STR_VOLUME_ID 0 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_SYNC_T HANDLE // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_USE_CHMOD 0 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_USE_EXPAND 0 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_USE_FASTSEEK 0 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_USE_FIND 0 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_USE_FORWARD 0 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_USE_LABEL 0 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_USE_LFN 3 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_USE_MKFS 1 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_USE_STRFUNC 0 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_USE_TRIM 1 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_VOLUMES 4 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FF_VOLUME_STRS "RAM","NAND","CF","SD","SD2","USB","USB2","USB3" // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FLUSH_ON_NEW_CLUSTER 0 // set by library:fat_chan
#define MBED_CONF_FAT_CHAN_FLUSH_ON_NEW_SECTOR 1 // set by library:fat_chan
#define MBED_CONF_FILESYSTEM_PRESENT 1 // set by library:filesystem
#define MBED_CONF_GEMALTO_CINTERION_BAUDRATE 115200 // set by library:GEMALTO_CINTERION
#define MBED_CONF_GEMALTO_CINTERION_PROVIDE_DEFAULT 0 // set by library:GEMALTO_CINTERION
#define MBED_CONF_GENERIC_AT3GPP_BAUDRATE 115200 // set by library:GENERIC_AT3GPP
#define MBED_CONF_GENERIC_AT3GPP_PROVIDE_DEFAULT 0 // set by library:GENERIC_AT3GPP
#define MBED_CONF_LORA_ADR_ON 1 // set by library:lora
#define MBED_CONF_LORA_APPLICATION_EUI {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} // set by library:lora
#define MBED_CONF_LORA_APPLICATION_KEY {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} // set by library:lora
#define MBED_CONF_LORA_APPSKEY {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} // set by library:lora
#define MBED_CONF_LORA_APP_PORT 15 // set by library:lora
#define MBED_CONF_LORA_AUTOMATIC_UPLINK_MESSAGE 1 // set by library:lora
#define MBED_CONF_LORA_DEVICE_ADDRESS 0x00000000 // set by library:lora
#define MBED_CONF_LORA_DEVICE_EUI {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} // set by library:lora
#define MBED_CONF_LORA_DOWNLINK_PREAMBLE_LENGTH 5 // set by library:lora
#define MBED_CONF_LORA_DUTY_CYCLE_ON 1 // set by library:lora
#define MBED_CONF_LORA_DUTY_CYCLE_ON_JOIN 1 // set by library:lora
#define MBED_CONF_LORA_FSB_MASK {0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0x00FF} // set by library:lora
#define MBED_CONF_LORA_FSB_MASK_CHINA {0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF, 0xFFFF} // set by library:lora
#define MBED_CONF_LORA_LBT_ON 0 // set by library:lora
#define MBED_CONF_LORA_MAX_SYS_RX_ERROR 5 // set by library:lora
#define MBED_CONF_LORA_NB_TRIALS 12 // set by library:lora
#define MBED_CONF_LORA_NWKSKEY {0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00} // set by library:lora
#define MBED_CONF_LORA_OVER_THE_AIR_ACTIVATION 1 // set by library:lora
#define MBED_CONF_LORA_PHY EU868 // set by library:lora
#define MBED_CONF_LORA_PUBLIC_NETWORK 1 // set by library:lora
#define MBED_CONF_LORA_TX_MAX_SIZE 64 // set by library:lora
#define MBED_CONF_LORA_UPLINK_PREAMBLE_LENGTH 8 // set by library:lora
#define MBED_CONF_LORA_WAKEUP_TIME 5 // set by library:lora
#define MBED_CONF_LWIP_ADDR_TIMEOUT 5 // set by library:lwip
#define MBED_CONF_LWIP_ADDR_TIMEOUT_MODE 1 // set by library:lwip
#define MBED_CONF_LWIP_DEBUG_ENABLED 0 // set by library:lwip
#define MBED_CONF_LWIP_DEFAULT_THREAD_STACKSIZE 512 // set by library:lwip
#define MBED_CONF_LWIP_DHCP_TIMEOUT 60 // set by library:lwip
#define MBED_CONF_LWIP_ENABLE_PPP_TRACE 0 // set by library:lwip
#define MBED_CONF_LWIP_ETHERNET_ENABLED 1 // set by library:lwip
#define MBED_CONF_LWIP_IPV4_ENABLED 1 // set by library:lwip
#define MBED_CONF_LWIP_IPV6_ENABLED 0 // set by library:lwip
#define MBED_CONF_LWIP_IP_VER_PREF 4 // set by library:lwip
#define MBED_CONF_LWIP_L3IP_ENABLED 0 // set by library:lwip
#define MBED_CONF_LWIP_MBOX_SIZE 8 // set by library:lwip
#define MBED_CONF_LWIP_MEMP_NUM_TCPIP_MSG_INPKT 8 // set by library:lwip
#define MBED_CONF_LWIP_MEMP_NUM_TCP_SEG 16 // set by library:lwip
#define MBED_CONF_LWIP_MEM_SIZE 2310 // set by library:lwip[STM]
#define MBED_CONF_LWIP_ND6_QUEUEING 0 // set by library:lwip
#define MBED_CONF_LWIP_ND6_RDNSS_MAX_DNS_SERVERS 0 // set by library:lwip
#define MBED_CONF_LWIP_NUM_NETBUF 8 // set by library:lwip
#define MBED_CONF_LWIP_NUM_PBUF 8 // set by library:lwip
#define MBED_CONF_LWIP_PBUF_POOL_SIZE 5 // set by library:lwip
#define MBED_CONF_LWIP_PPP_ENABLED 0 // set by library:lwip
#define MBED_CONF_LWIP_PPP_IPV4_ENABLED 0 // set by library:lwip
#define MBED_CONF_LWIP_PPP_IPV6_ENABLED 0 // set by library:lwip
#define MBED_CONF_LWIP_PPP_THREAD_STACKSIZE 768 // set by library:lwip
#define MBED_CONF_LWIP_PRESENT 1 // set by library:lwip
#define MBED_CONF_LWIP_RAW_SOCKET_ENABLED 0 // set by library:lwip
#define MBED_CONF_LWIP_SOCKET_MAX 4 // set by library:lwip
#define MBED_CONF_LWIP_TCPIP_THREAD_PRIORITY osPriorityNormal // set by library:lwip
#define MBED_CONF_LWIP_TCPIP_THREAD_STACKSIZE 1200 // set by library:lwip
#define MBED_CONF_LWIP_TCP_CLOSE_TIMEOUT 1000 // set by library:lwip
#define MBED_CONF_LWIP_TCP_ENABLED 1 // set by library:lwip
#define MBED_CONF_LWIP_TCP_MAXRTX 6 // set by library:lwip
#define MBED_CONF_LWIP_TCP_MSS 536 // set by library:lwip
#define MBED_CONF_LWIP_TCP_SERVER_MAX 4 // set by library:lwip
#define MBED_CONF_LWIP_TCP_SND_BUF (2 * TCP_MSS) // set by library:lwip
#define MBED_CONF_LWIP_TCP_SOCKET_MAX 4 // set by library:lwip
#define MBED_CONF_LWIP_TCP_SYNMAXRTX 6 // set by library:lwip
#define MBED_CONF_LWIP_TCP_WND (4 * TCP_MSS) // set by library:lwip
#define MBED_CONF_LWIP_UDP_SOCKET_MAX 4 // set by library:lwip
#define MBED_CONF_LWIP_USE_MBED_TRACE 0 // set by library:lwip
#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_CHANNEL 0 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_CHANNEL_MASK 0x7fff800 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_CHANNEL_PAGE 0 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_DEVICE_TYPE NET_6LOWPAN_ROUTER // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_PANID_FILTER 0xffff // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_PSK_KEY {0xa0, 0xa1, 0xa2, 0xa3, 0xa4, 0xa5, 0xa6, 0xa7, 0xa8, 0xa9, 0xaa, 0xab, 0xac, 0xad, 0xae, 0xaf} // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_PSK_KEY_ID 1 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_SECURITY_MODE NONE // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_6LOWPAN_ND_SEC_LEVEL 5 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_HEAP_SIZE 32500 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_HEAP_STAT_INFO NULL // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_MAC_NEIGH_TABLE_SIZE 32 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_RADIUS_RETRY_COUNT 3 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_RADIUS_RETRY_IMAX 30 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_RADIUS_RETRY_IMIN 20 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_SYSTEM_TIME_UPDATE_FROM_NANOSTACK 1 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_CHANNEL 22 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_CHANNEL_MASK 0x7fff800 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_CHANNEL_PAGE 0 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_COMMISSIONING_DATASET_TIMESTAMP 0x10000 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_EXTENDED_PANID {0xf1, 0xb5, 0xa1, 0xb2,0xc4, 0xd5, 0xa1, 0xbd } // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_ML_PREFIX {0xfd, 0x0, 0x0d, 0xb8, 0x0, 0x0, 0x0, 0x0} // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_NETWORK_NAME "Thread Network" // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_PANID 0x0700 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_CONFIG_PSKC {0xc8, 0xa6, 0x2e, 0xae, 0xf3, 0x68, 0xf3, 0x46, 0xa9, 0x9e, 0x57, 0x85, 0x98, 0x9d, 0x1c, 0xd0} // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_DEVICE_TYPE MESH_DEVICE_TYPE_THREAD_ROUTER // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_MASTER_KEY {0x10, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff} // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_PSKD "ABCDEFGH" // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_SECURITY_POLICY 255 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_THREAD_USE_STATIC_LINK_CONFIG 1 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_USE_MALLOC_FOR_HEAP 0 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_BC_CHANNEL_FUNCTION 255 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_BC_DWELL_INTERVAL 0 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_BC_FIXED_CHANNEL 65535 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_BC_INTERVAL 0 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_CHANNEL_PLAN_ID 255 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_DEVICE_TYPE MESH_DEVICE_TYPE_WISUN_ROUTER // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_NETWORK_NAME "Wi-SUN Network" // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_OPERATING_CLASS 255 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_OPERATING_MODE 255 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_PHY_MODE_ID 255 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_REGULATORY_DOMAIN 3 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_UC_CHANNEL_FUNCTION 255 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_UC_DWELL_INTERVAL 255 // set by library:mbed-mesh-api
#define MBED_CONF_MBED_MESH_API_WISUN_UC_FIXED_CHANNEL 65535 // set by library:mbed-mesh-api
#define MBED_CONF_MCR20A_PROVIDE_DEFAULT 0 // set by library:mcr20a
#define MBED_CONF_NANOSTACK_CONFIGURATION nanostack_full // set by library:nanostack
#define MBED_CONF_NANOSTACK_HAL_CRITICAL_SECTION_USABLE_FROM_INTERRUPT 0 // set by library:nanostack-hal
#define MBED_CONF_NANOSTACK_HAL_EVENT_LOOP_DISPATCH_FROM_APPLICATION 0 // set by library:nanostack-hal
#define MBED_CONF_NANOSTACK_HAL_EVENT_LOOP_THREAD_STACK_SIZE 6144 // set by library:nanostack-hal
#define MBED_CONF_NANOSTACK_HAL_EVENT_LOOP_USE_MBED_EVENTS 0 // set by library:nanostack-hal
#define MBED_CONF_NANOSTACK_HAL_KVSTORE_PATH "/kv/" // set by library:nanostack-hal
#define MBED_CONF_NANOSTACK_HAL_USE_KVSTORE 0 // set by library:nanostack-hal
#define MBED_CONF_NANOSTACK_LIBSERVICE_NSDYNMEM_TRACKER_ENABLED 0 // set by library:nanostack-libservice
#define MBED_CONF_NANOSTACK_LIBSERVICE_PRESENT 1 // set by library:nanostack-libservice
#define MBED_CONF_NSAPI_ADD_EVENT_LISTENER_RETURN_CHANGE 0 // set by library:nsapi
#define MBED_CONF_NSAPI_DEFAULT_MESH_TYPE THREAD // set by library:nsapi
#define MBED_CONF_NSAPI_DEFAULT_STACK LWIP // set by library:nsapi
#define MBED_CONF_NSAPI_DEFAULT_WIFI_SECURITY NONE // set by library:nsapi
#define MBED_CONF_NSAPI_DNS_ADDRESSES_LIMIT 10 // set by library:nsapi
#define MBED_CONF_NSAPI_DNS_CACHE_SIZE 3 // set by library:nsapi
#define MBED_CONF_NSAPI_DNS_RESPONSE_WAIT_TIME 10000 // set by library:nsapi
#define MBED_CONF_NSAPI_DNS_RETRIES 1 // set by library:nsapi
#define MBED_CONF_NSAPI_DNS_TOTAL_ATTEMPTS 10 // set by library:nsapi
#define MBED_CONF_NSAPI_PRESENT 1 // set by library:nsapi
#define MBED_CONF_NSAPI_SOCKET_STATS_ENABLED 0 // set by library:nsapi
#define MBED_CONF_NSAPI_SOCKET_STATS_MAX_COUNT 10 // set by library:nsapi
#define MBED_CONF_PLATFORM_CALLBACK_COMPARABLE 1 // set by library:platform
#define MBED_CONF_PLATFORM_CALLBACK_NONTRIVIAL 0 // set by library:platform
#define MBED_CONF_PLATFORM_CRASH_CAPTURE_ENABLED 0 // set by library:platform
#define MBED_CONF_PLATFORM_CTHUNK_COUNT_MAX 8 // set by library:platform
#define MBED_CONF_PLATFORM_DEEPSLEEP_STATS_VERBOSE 0 // set by library:platform[STM]
#define MBED_CONF_PLATFORM_DEFAULT_SERIAL_BAUD_RATE 9600 // set by library:platform
#define MBED_CONF_PLATFORM_ERROR_ALL_THREADS_INFO 0 // set by library:platform
#define MBED_CONF_PLATFORM_ERROR_FILENAME_CAPTURE_ENABLED 0 // set by library:platform
#define MBED_CONF_PLATFORM_ERROR_HIST_ENABLED 0 // set by library:platform
#define MBED_CONF_PLATFORM_ERROR_HIST_SIZE 4 // set by library:platform
#define MBED_CONF_PLATFORM_ERROR_REBOOT_MAX 1 // set by library:platform
#define MBED_CONF_PLATFORM_FATAL_ERROR_AUTO_REBOOT_ENABLED 0 // set by library:platform
#define MBED_CONF_PLATFORM_MAX_ERROR_FILENAME_LEN 16 // set by library:platform
#define MBED_CONF_PLATFORM_MINIMAL_PRINTF_ENABLE_64_BIT 1 // set by library:platform
#define MBED_CONF_PLATFORM_MINIMAL_PRINTF_ENABLE_FLOATING_POINT 0 // set by library:platform
#define MBED_CONF_PLATFORM_MINIMAL_PRINTF_SET_FLOATING_POINT_MAX_DECIMALS 6 // set by library:platform
#define MBED_CONF_PLATFORM_POLL_USE_LOWPOWER_TIMER 0 // set by library:platform
#define MBED_CONF_PLATFORM_STDIO_BAUD_RATE 9600 // set by library:platform
#define MBED_CONF_PLATFORM_STDIO_BUFFERED_SERIAL 0 // set by library:platform
#define MBED_CONF_PLATFORM_STDIO_CONVERT_NEWLINES 1 // set by library:platform
#define MBED_CONF_PLATFORM_STDIO_CONVERT_TTY_NEWLINES 1 // set by library:platform
#define MBED_CONF_PLATFORM_STDIO_FLUSH_AT_EXIT 1 // set by library:platform
#define MBED_CONF_PLATFORM_STDIO_MINIMAL_CONSOLE_ONLY 0 // set by library:platform
#define MBED_CONF_PLATFORM_USE_MPU 1 // set by library:platform
#define MBED_CONF_PPP_ENABLED 0 // set by library:ppp
#define MBED_CONF_PPP_ENABLE_TRACE 0 // set by library:ppp
#define MBED_CONF_PPP_IPV4_ENABLED 1 // set by library:ppp
#define MBED_CONF_PPP_IPV6_ENABLED 0 // set by library:ppp
#define MBED_CONF_PPP_MBED_EVENT_QUEUE 0 // set by library:ppp
#define MBED_CONF_PPP_THREAD_STACKSIZE 816 // set by library:ppp
#define MBED_CONF_QUECTEL_BC95_BAUDRATE 9600 // set by library:QUECTEL_BC95
#define MBED_CONF_QUECTEL_BC95_PROVIDE_DEFAULT 0 // set by library:QUECTEL_BC95
#define MBED_CONF_QUECTEL_BG96_BAUDRATE 115200 // set by library:QUECTEL_BG96
#define MBED_CONF_QUECTEL_BG96_PROVIDE_DEFAULT 0 // set by library:QUECTEL_BG96
#define MBED_CONF_QUECTEL_EC2X_BAUDRATE 115200 // set by library:QUECTEL_EC2X
#define MBED_CONF_QUECTEL_EC2X_PROVIDE_DEFAULT 0 // set by library:QUECTEL_EC2X
#define MBED_CONF_QUECTEL_EC2X_START_TIMEOUT 15000 // set by library:QUECTEL_EC2X
#define MBED_CONF_QUECTEL_M26_BAUDRATE 115200 // set by library:QUECTEL_M26
#define MBED_CONF_QUECTEL_M26_PROVIDE_DEFAULT 0 // set by library:QUECTEL_M26
#define MBED_CONF_QUECTEL_UG96_BAUDRATE 115200 // set by library:QUECTEL_UG96
#define MBED_CONF_QUECTEL_UG96_PROVIDE_DEFAULT 0 // set by library:QUECTEL_UG96
#define MBED_CONF_RM1000_AT_BAUDRATE 230400 // set by library:RM1000_AT
#define MBED_CONF_RM1000_AT_PROVIDE_DEFAULT 0 // set by library:RM1000_AT
#define MBED_CONF_RTOS_API_PRESENT 1 // set by library:rtos-api
#define MBED_CONF_RTOS_ENABLE_ALL_RTX_EVENTS 0 // set by library:rtos
#define MBED_CONF_RTOS_EVFLAGS_NUM 0 // set by library:rtos
#define MBED_CONF_RTOS_IDLE_THREAD_STACK_SIZE 512 // set by library:rtos
#define MBED_CONF_RTOS_IDLE_THREAD_STACK_SIZE_DEBUG_EXTRA 128 // set by library:rtos[STM]
#define MBED_CONF_RTOS_IDLE_THREAD_STACK_SIZE_TICKLESS_EXTRA 256 // set by library:rtos
#define MBED_CONF_RTOS_MAIN_THREAD_STACK_SIZE 4096 // set by library:rtos
#define MBED_CONF_RTOS_MSGQUEUE_DATA_SIZE 0 // set by library:rtos
#define MBED_CONF_RTOS_MSGQUEUE_NUM 0 // set by library:rtos
#define MBED_CONF_RTOS_MUTEX_NUM 0 // set by library:rtos
#define MBED_CONF_RTOS_PRESENT 1 // set by library:rtos
#define MBED_CONF_RTOS_SEMAPHORE_NUM 0 // set by library:rtos
#define MBED_CONF_RTOS_THREAD_NUM 0 // set by library:rtos
#define MBED_CONF_RTOS_THREAD_STACK_SIZE 4096 // set by library:rtos
#define MBED_CONF_RTOS_THREAD_USER_STACK_SIZE 0 // set by library:rtos
#define MBED_CONF_RTOS_TIMER_NUM 0 // set by library:rtos
#define MBED_CONF_RTOS_TIMER_THREAD_STACK_SIZE 768 // set by library:rtos
#define MBED_CONF_S2LP_PROVIDE_DEFAULT 0 // set by library:s2lp
#define MBED_CONF_SARA4_PPP_BAUDRATE 115200 // set by library:SARA4_PPP
#define MBED_CONF_SARA4_PPP_PROVIDE_DEFAULT 0 // set by library:SARA4_PPP
#define MBED_CONF_STM32_EMAC_ETH_PHY_ADDRESS 0 // set by library:stm32-emac
#define MBED_CONF_STM32_EMAC_ETH_PHY_AUTONEGOTIATION ETH_AUTONEGOTIATION_ENABLE // set by library:stm32-emac
#define MBED_CONF_STM32_EMAC_ETH_PHY_DUPLEXMODE ETH_MODE_FULLDUPLEX // set by library:stm32-emac
#define MBED_CONF_STM32_EMAC_ETH_PHY_DUPLEX_STATUS 0x0010 // set by library:stm32-emac
#define MBED_CONF_STM32_EMAC_ETH_PHY_MEDIA_INTERFACE ETH_MEDIA_INTERFACE_RMII // set by library:stm32-emac
#define MBED_CONF_STM32_EMAC_ETH_PHY_RESET_DELAY 500 // set by library:stm32-emac
#define MBED_CONF_STM32_EMAC_ETH_PHY_SPEED ETH_SPEED_100M // set by library:stm32-emac
#define MBED_CONF_STM32_EMAC_ETH_PHY_SPEED_STATUS 0x0004 // set by library:stm32-emac
#define MBED_CONF_STM32_EMAC_ETH_PHY_STATUS_REGISTER 31 // set by library:stm32-emac
#define MBED_CONF_STM32_EMAC_ETH_RXBUFNB 4 // set by library:stm32-emac
#define MBED_CONF_STM32_EMAC_ETH_TXBUFNB 4 // set by library:stm32-emac
#define MBED_CONF_STM32_EMAC_THREAD_STACKSIZE 1024 // set by library:stm32-emac
#define MBED_CONF_STORAGE_DEFAULT_KV kv // set by library:storage
#define MBED_CONF_STORAGE_FILESYSTEM_BLOCKDEVICE default // set by library:storage_filesystem
#define MBED_CONF_STORAGE_FILESYSTEM_EXTERNAL_BASE_ADDRESS 0 // set by library:storage_filesystem
#define MBED_CONF_STORAGE_FILESYSTEM_EXTERNAL_SIZE 0 // set by library:storage_filesystem
#define MBED_CONF_STORAGE_FILESYSTEM_FILESYSTEM default // set by library:storage_filesystem
#define MBED_CONF_STORAGE_FILESYSTEM_FOLDER_PATH kvstore // set by library:storage_filesystem
#define MBED_CONF_STORAGE_FILESYSTEM_INTERNAL_BASE_ADDRESS 0 // set by library:storage_filesystem
#define MBED_CONF_STORAGE_FILESYSTEM_MOUNT_POINT kv // set by library:storage_filesystem
#define MBED_CONF_STORAGE_FILESYSTEM_NO_RBP_BLOCKDEVICE default // set by library:storage_filesystem_no_rbp
#define MBED_CONF_STORAGE_FILESYSTEM_NO_RBP_EXTERNAL_BASE_ADDRESS 0 // set by library:storage_filesystem_no_rbp
#define MBED_CONF_STORAGE_FILESYSTEM_NO_RBP_EXTERNAL_SIZE 0 // set by library:storage_filesystem_no_rbp
#define MBED_CONF_STORAGE_FILESYSTEM_NO_RBP_FILESYSTEM default // set by library:storage_filesystem_no_rbp
#define MBED_CONF_STORAGE_FILESYSTEM_NO_RBP_FOLDER_PATH kvstore // set by library:storage_filesystem_no_rbp
#define MBED_CONF_STORAGE_FILESYSTEM_NO_RBP_MOUNT_POINT kv // set by library:storage_filesystem_no_rbp
#define MBED_CONF_STORAGE_FILESYSTEM_RBP_INTERNAL_SIZE 0 // set by library:storage_filesystem
#define MBED_CONF_STORAGE_STORAGE_TYPE default // set by library:storage
#define MBED_CONF_STORAGE_TDB_EXTERNAL_BLOCKDEVICE default // set by library:storage_tdb_external
#define MBED_CONF_STORAGE_TDB_EXTERNAL_EXTERNAL_BASE_ADDRESS 0 // set by library:storage_tdb_external
#define MBED_CONF_STORAGE_TDB_EXTERNAL_EXTERNAL_SIZE 0 // set by library:storage_tdb_external
#define MBED_CONF_STORAGE_TDB_EXTERNAL_INTERNAL_BASE_ADDRESS 0 // set by library:storage_tdb_external
#define MBED_CONF_STORAGE_TDB_EXTERNAL_NO_RBP_BLOCKDEVICE default // set by library:storage_tdb_external_no_rbp
#define MBED_CONF_STORAGE_TDB_EXTERNAL_NO_RBP_EXTERNAL_BASE_ADDRESS 0 // set by library:storage_tdb_external_no_rbp
#define MBED_CONF_STORAGE_TDB_EXTERNAL_NO_RBP_EXTERNAL_SIZE 0 // set by library:storage_tdb_external_no_rbp
#define MBED_CONF_STORAGE_TDB_EXTERNAL_RBP_INTERNAL_SIZE 0 // set by library:storage_tdb_external
#define MBED_CONF_STORAGE_TDB_INTERNAL_INTERNAL_BASE_ADDRESS 0 // set by library:storage_tdb_internal
#define MBED_CONF_STORAGE_TDB_INTERNAL_INTERNAL_SIZE 0 // set by library:storage_tdb_internal
#define MBED_CONF_TARGET_BOOT_STACK_SIZE 0x400 // set by library:rtos[*]
#define MBED_CONF_TARGET_CONSOLE_UART 1 // set by target:Target
#define MBED_CONF_TARGET_CUSTOM_TICKERS 1 // set by target:Target
#define MBED_CONF_TARGET_DEEP_SLEEP_LATENCY 4 // set by target:MCU_STM32
#define MBED_CONF_TARGET_DEFAULT_ADC_VREF NAN // set by target:Target
#define MBED_CONF_TARGET_GPIO_RESET_AT_INIT 0 // set by target:MCU_STM32
#define MBED_CONF_TARGET_INIT_US_TICKER_AT_BOOT 1 // set by target:MCU_STM32
#define MBED_CONF_TARGET_INTERNAL_FLASH_UNIFORM_SECTORS 1 // set by target:Target
#define MBED_CONF_TARGET_LPTICKER_LPTIM_CLOCK 1 // set by target:MCU_STM32
#define MBED_CONF_TARGET_LPUART_CLOCK_SOURCE USE_LPUART_CLK_LSE|USE_LPUART_CLK_PCLK1|USE_LPUART_CLK_PCLK3 // set by target:MCU_STM32
#define MBED_CONF_TARGET_LSE_AVAILABLE 1 // set by target:MCU_STM32
#define MBED_CONF_TARGET_MPU_ROM_END 0x0fffffff // set by target:Target
#define MBED_CONF_TARGET_RTC_CLOCK_SOURCE USE_RTC_CLK_LSE_OR_LSI // set by target:MCU_STM32
#define MBED_CONF_TARGET_TICKLESS_FROM_US_TICKER 0 // set by target:Target
#define MBED_CONF_TARGET_XIP_ENABLE 0 // set by target:Target
#define MBED_CONF_TELIT_HE910_BAUDRATE 115200 // set by library:TELIT_HE910
#define MBED_CONF_TELIT_HE910_PROVIDE_DEFAULT 0 // set by library:TELIT_HE910
#define MBED_CONF_TELIT_ME310_BAUDRATE 115200 // set by library:TELIT_ME310
#define MBED_CONF_TELIT_ME310_PROVIDE_DEFAULT 0 // set by library:TELIT_ME310
#define MBED_CONF_TELIT_ME910_BAUDRATE 115200 // set by library:TELIT_ME910
#define MBED_CONF_TELIT_ME910_PROVIDE_DEFAULT 0 // set by library:TELIT_ME910
#define MBED_CONF_UBLOX_AT_BAUDRATE 115200 // set by library:UBLOX_AT
#define MBED_CONF_UBLOX_AT_PROVIDE_DEFAULT 0 // set by library:UBLOX_AT
#define MBED_CONF_UBLOX_N2XX_BAUDRATE 9600 // set by library:UBLOX_N2XX
#define MBED_CONF_UBLOX_N2XX_PROVIDE_DEFAULT 0 // set by library:UBLOX_N2XX
#define MBED_CONF_UBLOX_PPP_BAUDRATE 115200 // set by library:UBLOX_PPP
#define MBED_CONF_UBLOX_PPP_PROVIDE_DEFAULT 0 // set by library:UBLOX_PPP
#define MBED_CRC_TABLE_SIZE 16 // set by library:drivers
#define MBED_LFS2_BLOCK_CYCLES 1024 // set by library:littlefs2
#define MBED_LFS2_BLOCK_SIZE 512 // set by library:littlefs2
#define MBED_LFS2_CACHE_SIZE 64 // set by library:littlefs2
#define MBED_LFS2_ENABLE_INFO 0 // set by library:littlefs2
#define MBED_LFS2_INTRINSICS 1 // set by library:littlefs2
#define MBED_LFS2_LOOKAHEAD_SIZE 64 // set by library:littlefs2
#define MBED_LFS_BLOCK_SIZE 512 // set by library:littlefs
#define MBED_LFS_ENABLE_INFO 0 // set by library:littlefs
#define MBED_LFS_INTRINSICS 1 // set by library:littlefs
#define MBED_LFS_LOOKAHEAD 512 // set by library:littlefs
#define MBED_LFS_PROG_SIZE 64 // set by library:littlefs
#define MBED_LFS_READ_SIZE 64 // set by library:littlefs
#define MBED_STACK_DUMP_ENABLED 0 // set by library:platform
#define MBED_TRACE_COLOR_THEME 0 // set by library:mbed-trace
#define MEM_ALLOC malloc // set by library:mbed-trace
#define MEM_FREE free // set by library:mbed-trace
#define PPP_DEBUG 0 // set by library:ppp
// Macros
#define MBEDTLS_CIPHER_MODE_CTR // defined by library:SecureStore
#define NSAPI_PPP_AVAILABLE (MBED_CONF_PPP_ENABLED || MBED_CONF_LWIP_PPP_ENABLED) // defined by library:ppp
#define NSDYNMEM_TRACKER_ENABLED MBED_CONF_NANOSTACK_LIBSERVICE_NSDYNMEM_TRACKER_ENABLED // defined by library:nanostack-libservice
#define NS_USE_EXTERNAL_MBED_TLS // defined by library:nanostack
#define UNITY_INCLUDE_CONFIG_H // defined by library:utest
#define _RTE_ // defined by library:rtos
#endif