Dheeraj M Pai / Mbed 2 deprecated October_22_11AM_V_2_1

Everything working except ticker. Ticker is not working. Please make sure all the ground are connected. INterrupt and CS pin are changed. Please take care of that. Thank You

Dependencies:   mbed

Fork of October_22_11AM____Worksproperly_till_bbram by Dheeraj M Pai

Diff: main.cpp

Revision:
1:9cd986151b11
Parent:
0:cb8104f3ae71
Child:
2:3ad3165e4d6c
--- a/main.cpp	Thu Oct 22 09:43:36 2015 +0000
+++ b/main.cpp	Thu Oct 22 10:01:48 2015 +0000
@@ -28,7 +28,7 @@
 /****************************/
 SPI adf(PTA16, MISO_PIN, PTA15);
 //MOSI, MISO, CLOCK 
-DigitalOut CS(D9);
+DigitalOut CS(D7);
 //DigitalOut CS(PTD4);//D10==PTD4
 Serial PC(USBTX, USBRX);
 DigitalOut ledr(LED1);
@@ -307,12 +307,12 @@
     adf.write(0xFF);//Put Low
     CS=1;
     wait_us(80);
-    CS=0;
+  //  CS=0;
      
 //     a[r]=t.read_us();
      j++;
 //     r++;
-     CS=1;
+//     CS=1;
      wait_us(1);
 }     
      
@@ -369,9 +369,10 @@
     }
 /*******ADDITIONAL STUFF****************/    
 unsigned char check_status(void){
+    unsigned char stat=0;
     CS=0;
     adf.write(0xFF);
-    unsigned char stat = adf.write(0xFF);
+    stat = adf.write(0xFF);
     CS=1;
     return stat;
     }
@@ -476,7 +477,7 @@
     adf.write(CMD_HW_RESET);
     CS=1;
     wait_ms(2);// Typically 1 ms
-    while(count<1000 && miso_err_cnt<1000){      
+    while(count<10 && miso_err_cnt<10){      
         if(MISO_PIN){
             
             if(!assrt_phy_off(0,0,0)){
@@ -489,7 +490,7 @@
             miso_err_cnt++;
         }
     }
-    if(count==1000 ||miso_err_cnt==1000){
+    if(count==10 ||miso_err_cnt==10){
         return hardware_reset(bcn_call+1);  
     }
     else
@@ -517,6 +518,7 @@
         }
         else{
             hardware_reset(0);  // Asserts Hardware for 20sec(20times). PHY_OFF for 20,000 times
+            hw_reset_err_cnt++;
         }
     }
     state_0=assrt_phy_off(0,0,0);// We actually do not need this but make sure "we do not need this"