Diff: src/mbed-dev/api/BusInOut.h

Revision:

0:c76361bd82e8

diff -r 000000000000 -r c76361bd82e8 src/mbed-dev/api/BusInOut.h
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/src/mbed-dev/api/BusInOut.h	Wed Apr 11 14:42:47 2018 +0000
@@ -0,0 +1,123 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ */
+#ifndef MBED_BUSINOUT_H
+#define MBED_BUSINOUT_H
+
+#include "DigitalInOut.h"
+#include "PlatformMutex.h"
+
+namespace mbed {
+
+/** A digital input output bus, used for setting the state of a collection of pins
+ *
+ * @Note Synchronization level: Thread safe
+ */
+class BusInOut {
+
+public:
+
+    /** Create an BusInOut, connected to the specified pins
+     *
+     *  @param p<n> DigitalInOut pin to connect to bus bit p<n> (p5-p30, NC)
+     *
+     *  @note
+     *  It is only required to specify as many pin variables as is required
+     *  for the bus; the rest will default to NC (not connected)
+     */
+    BusInOut(PinName p0, PinName p1 = NC, PinName p2 = NC, PinName p3 = NC,
+             PinName p4 = NC, PinName p5 = NC, PinName p6 = NC, PinName p7 = NC,
+             PinName p8 = NC, PinName p9 = NC, PinName p10 = NC, PinName p11 = NC,
+             PinName p12 = NC, PinName p13 = NC, PinName p14 = NC, PinName p15 = NC);
+
+    BusInOut(PinName pins[16]);
+
+    virtual ~BusInOut();
+
+    /* Group: Access Methods */
+
+    /** Write the value to the output bus
+     *
+     *  @param value An integer specifying a bit to write for every corresponding DigitalInOut pin
+     */
+    void write(int value);
+
+    /** Read the value currently output on the bus
+     *
+     *  @returns
+     *    An integer with each bit corresponding to associated DigitalInOut pin setting
+     */
+    int read();
+
+    /** Set as an output
+     */
+    void output();
+
+    /** Set as an input
+     */
+    void input();
+
+    /** Set the input pin mode
+     *
+     *  @param mode PullUp, PullDown, PullNone
+     */
+    void mode(PinMode pull);
+
+    /** Binary mask of bus pins connected to actual pins (not NC pins)
+     *  If bus pin is in NC state make corresponding bit will be cleared (set to 0), else bit will be set to 1
+     *
+     *  @returns
+     *    Binary mask of connected pins
+     */
+    int mask() {
+        // No lock needed since _nc_mask is not modified outside the constructor
+        return _nc_mask;
+    }
+
+     /** A shorthand for write()
+     */
+    BusInOut& operator= (int v);
+    BusInOut& operator= (BusInOut& rhs);
+
+    /** Access to particular bit in random-iterator fashion
+    */
+    DigitalInOut& operator[] (int index);
+
+    /** A shorthand for read()
+     */
+    operator int();
+
+protected:
+    virtual void lock();
+    virtual void unlock();
+    DigitalInOut* _pin[16];
+
+    /** Mask of bus's NC pins
+     * If bit[n] is set to 1 - pin is connected
+     * if bit[n] is cleared - pin is not connected (NC)
+     */
+    int _nc_mask;
+
+    PlatformMutex _mutex;
+
+    /* disallow copy constructor and assignment operators */
+private:
+    BusInOut(const BusInOut&);
+    BusInOut & operator = (const BusInOut&);
+};
+
+} // namespace mbed
+
+#endif