Damian Gabino
A very easy to understand LoRaWAN-node code.
Dependencies: LoRaWAN-lib SX1272Lib X_NUCLEO_IKS01A1 mbed
Important parameters:
• In comissioning.h: DevEUI, AppEUI, AppKEY, DevADR, NwksKEY, AppsKEY, OTAA and public network. Frequency and channel block to use, confirmed or unconfirmed messages, app port, app data size and OTAA and Tx duty cycles.
• In LoRaMac.h: Maximum payload and MAC commands length, receive delays, max FCNT, adr ack limit, timeout and delay, max ack retries, rssi threshold and sync words.
• In LoRaMac.cpp: Maximum payload, MAC commands and FRMpayload length.
• In LoRaMac-board.h: Tx power, data rates and band settings.
NOTE: Please refer to LoRaWAN regional parameters (page 12 for US band) to know which parameters you can modify.
Code/Comissioning.h
- Committer:
- dgabino
- Date:
- 2018-04-03
- Revision:
- 0:60ff878b27b8
File content as of revision 0:60ff878b27b8:
/*
/ _____) _ | |
( (____ _____ ____ _| |_ _____ ____| |__
\____ \| ___ | (_ _) ___ |/ ___) _ \
_____) ) ____| | | || |_| ____( (___| | | |
(______/|_____)_|_|_| \__)_____)\____)_| |_|
(C)2015 Semtech
Description: End device comissioning and comunication parameters
License: Revised BSD License, see LICENSE.TXT file include in the project
Maintainer: Miguel Luis and Gregory Cristian
*/
#include "board.h"
//********************************************************************* COMISSIONING PARAMETERS ************************************************************************
#ifndef __LORA_COMISSIONING_H__
#define __LORA_COMISSIONING_H__
/*!
* When set to 1 the application uses the Over-the-Air activation procedure
* When set to 0 the application uses the Personalization activation procedure
*/
#define OVER_THE_AIR_ACTIVATION 1
/*!
* Indicates if the end-device is to be connected to a private or public network
*/
#define LORAWAN_PUBLIC_NETWORK true
#if( OVER_THE_AIR_ACTIVATION != 0 )
/*!
* Mote device IEEE OUI (big endian)
* \remark This is unique to a company or organization
*/
#define IEEE_OUI 0x4f, 0x72, 0x62
/*!
* Mote device IEEE EUI (big endian)
*
* \remark In this application, if the last 4 bytes are all 0, then the 32 bit address is automatically generated using a pseudo random generator seeded with a value derived from BoardUniqueId value
* If provided by user, e.g. {IEEE_OUI, 0x00, 0x00, 0x00, 0xFF, 0x01}, then this value is used by the application. *0x69, 0x00, 0xab, 0xcd, 0xaa
*/
#define LORAWAN_DEVICE_EUI { IEEE_OUI, 0x69, 0x00, 0xab, 0xcd, 0xff }
/*!
* Application IEEE EUI (big endian)
*/
#define LORAWAN_APPLICATION_EUI { 0x70, 0xb3, 0xd5, 0x7e, 0xd0, 0x00, 0x96, 0x4b} //0x70, 0xb3, 0xd5, 0x7e, 0xd0, 0x00, 0x96, 0x4b for TTN server
//0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00 for semtech NA server
/*!
* AES encryption/decryption cipher application key
*/
#define LORAWAN_APPLICATION_KEY { 0x00, 0x11, 0x22, 0x33, 0x44, 0x55, 0x66, 0x77, 0x88, 0x99, 0xaa, 0xbb, 0xcc, 0xdd, 0xee, 0xff }
#else
/*!
* Device address on the network (big endian)
*
* \remark In this application, if the value is 0, then the address is automatically generated using a pseudo random generator seeded with a value derived from BoardUniqueId value
* If provided by user, e.g. 0x78563412, then this value is used by the application
*/
#define LORAWAN_DEVICE_ADDRESS ( uint32_t )0x0
/*!
* AES encryption/decryption cipher network session key
*/
#define LORAWAN_NWKSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
/*!
* AES encryption/decryption cipher application session key
*/
#define LORAWAN_APPSKEY { 0x2B, 0x7E, 0x15, 0x16, 0x28, 0xAE, 0xD2, 0xA6, 0xAB, 0xF7, 0x15, 0x88, 0x09, 0xCF, 0x4F, 0x3C }
#endif
#endif // __LORA_COMISSIONING_H__
//********************************************************************* COMUNICATION PARAMETERS ************************************************************************
#ifndef __LORA_CONFIG_H__
#define __LORA_CONFIG_H__
/*!
* Configure End-Device to use 8-channels corresponding to Block A
* Comment/Uncomment to disable/enable Hybrid mode
*/
#define USE_BAND_915_HYBRID
#ifndef USE_BAND_915_HYBRID
/*!
* Configure End-Device to use 64-channels across to Block A thru Block H
*/
#define USE_BAND_915
#else
// define channel block: e.g. USE_BAND_915_HYBRID_BLOCK_A, USE_BAND_915_HYBRID_BLOCK_B ... USE_BAND_915_HYBRID_BLOCK_H etc.
#define USE_BAND_915_HYBRID_BLOCK_A
#endif
/*!
* Join requests trials periodicity(+12s). It is the time between RX1/RX2 and next TX
*/
#define OVER_THE_AIR_ACTIVATION_DUTYCYCLE 5000000 // value in us
/*!
* Defines the application data transmission periodicity. It is the time between RX1/RX2 and next TX
*/
#define APP_TX_DUTYCYCLE 25000000 // value in us
/*!
* Defines the randomness in the dutycycle.
*/
#define APP_TX_DUTYCYCLE_RND 3000000
/*!
* LoRaWAN confirmed messages
* \remark 1 : Confirmed messages enabled. Must receive ACK from network server
0 : Confirmed messages disabled.
*/
#define LORAWAN_CONFIRMED_MSG_ON 0
/*!
* LoRaWAN Adaptive Data Rate
*
* \remark Please note that when ADR is enabled the end-device uses default datarate of DR_0
*/
#define LORAWAN_ADR_ON 0
/*!
* Default mote datarate
* \remark DR_0 : 980 bps; DR_1 : 1760 bps; DR_2 : 3125 bps; DR_3 : 5470 bps; DR_4 : 12500 bps
*/
#define LORAWAN_DEFAULT_DATARATE DR_0
/*!
* LoRaWAN application port
*/
#define LORAWAN_APP_PORT 5
/*!
* LoRaWAN User defined Tx Power
*
* \remark The Tx power level is set as TX_POWER_P_DBM, where 10 <= P <= 30 and P is even value { i.e. P = 10, 12, 14 ... 28 or 30 }
*/
#define LORAWAN_TX_POWER TX_POWER_10_DBM
#define LORAWAN_APP_DATA_SIZE 11
/*%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%%*/
#define USE_IKS01A1_SENSOR
#endif // __LORA_CONFIG_H__