David Fletcher
TI's CC3100 host driver and demo. Experimental and a work in progress.
simplelink/cc3100_netapp.h
- Committer:
- dflet
- Date:
- 2014-11-19
- Revision:
- 2:a3e52cf86086
- Parent:
- 0:bbe98578d4c0
File content as of revision 2:a3e52cf86086:
/*
* netapp.h - CC31xx/CC32xx Host Driver Implementation
*
* Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
*
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
*
* Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
*
* Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the
* distribution.
*
* Neither the name of Texas Instruments Incorporated nor the names of
* its contributors may be used to endorse or promote products derived
* from this software without specific prior written permission.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
* "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
* LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
* A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
* OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
* SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
* LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
* DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
* THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
* (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
*
*/
#ifndef __NETAPP_H__
#define __NETAPP_H__
/*****************************************************************************/
/* Include files */
/*****************************************************************************/
#include "cc3100_simplelink.h"
#ifdef __cplusplus
extern "C" {
#endif
/*!
\addtogroup netapp
@{
*/
/*****************************************************************************/
/* Macro declarations */
/*****************************************************************************/
/*ERROR code*/
#define SL_ERROR_NETAPP_RX_BUFFER_LENGTH_ERROR (-230)
/* Http Server interface */
#define MAX_INPUT_STRING (64) /* because of WPA */
#define MAX_AUTH_NAME_LEN (20)
#define MAX_AUTH_PASSWORD_LEN (20)
#define MAX_AUTH_REALM_LEN (20)
#define MAX_DEVICE_URN_LEN (15+1)
#define MAX_DOMAIN_NAME_LEN (24+1)
#define MAX_ACTION_LEN (30)
/* Important: in case the max len is changed, make sure the struct sl_NetAppHttpServerSendToken_t in protocol.h is padded correctly! */
#define MAX_TOKEN_NAME_LEN (20)
#define MAX_TOKEN_VALUE_LEN MAX_INPUT_STRING
#define NETAPP_MAX_SERVICE_TEXT_SIZE (256)
#define NETAPP_MAX_SERVICE_NAME_SIZE (60)
#define NETAPP_MAX_SERVICE_HOST_NAME_SIZE (64)
/* Server Responses */
#define SL_NETAPP_RESPONSE_NONE (0)
#define SL_NETAPP_HTTPSETTOKENVALUE (1)
#define SL_NETAPP_FAMILY_MASK (0x80)
/* mDNS types */
#define SL_NET_APP_MASK_IPP_TYPE_OF_SERVICE (0x00000001)
#define SL_NET_APP_MASK_DEVICE_INFO_TYPE_OF_SERVICE (0x00000002)
#define SL_NET_APP_MASK_HTTP_TYPE_OF_SERVICE (0x00000004)
#define SL_NET_APP_MASK_HTTPS_TYPE_OF_SERVICE (0x00000008)
#define SL_NET_APP_MASK_WORKSATION_TYPE_OF_SERVICE (0x00000010)
#define SL_NET_APP_MASK_GUID_TYPE_OF_SERVICE (0x00000020)
#define SL_NET_APP_MASK_H323_TYPE_OF_SERVICE (0x00000040)
#define SL_NET_APP_MASK_NTP_TYPE_OF_SERVICE (0x00000080)
#define SL_NET_APP_MASK_OBJECITVE_TYPE_OF_SERVICE (0x00000100)
#define SL_NET_APP_MASK_RDP_TYPE_OF_SERVICE (0x00000200)
#define SL_NET_APP_MASK_REMOTE_TYPE_OF_SERVICE (0x00000400)
#define SL_NET_APP_MASK_RTSP_TYPE_OF_SERVICE (0x00000800)
#define SL_NET_APP_MASK_SIP_TYPE_OF_SERVICE (0x00001000)
#define SL_NET_APP_MASK_SMB_TYPE_OF_SERVICE (0x00002000)
#define SL_NET_APP_MASK_SOAP_TYPE_OF_SERVICE (0x00004000)
#define SL_NET_APP_MASK_SSH_TYPE_OF_SERVICE (0x00008000)
#define SL_NET_APP_MASK_TELNET_TYPE_OF_SERVICE (0x00010000)
#define SL_NET_APP_MASK_TFTP_TYPE_OF_SERVICE (0x00020000)
#define SL_NET_APP_MASK_XMPP_CLIENT_TYPE_OF_SERVICE (0x00040000)
#define SL_NET_APP_MASK_RAOP_TYPE_OF_SERVICE (0x00080000)
#define SL_NET_APP_MASK_ALL_TYPE_OF_SERVICE (0xFFFFFFFF)
/********************************************************************************************************/
/* sl_NetAppDnsGetHostByName error codes */
#define SL_NET_APP_DNS_QUERY_NO_RESPONSE (-159) /* DNS query failed, no response */
#define SL_NET_APP_DNS_NO_SERVER (-161) /* No DNS server was specified */
#define SL_NET_APP_DNS_PARAM_ERROR (-162) /* mDNS parameters error */
#define SL_NET_APP_DNS_QUERY_FAILED (-163) /* DNS query failed; no DNS server sent an 'answer' */
#define SL_NET_APP_DNS_INTERNAL_1 (-164)
#define SL_NET_APP_DNS_INTERNAL_2 (-165)
#define SL_NET_APP_DNS_MALFORMED_PACKET (-166) /* Improperly formed or corrupted DNS packet received */
#define SL_NET_APP_DNS_INTERNAL_3 (-167)
#define SL_NET_APP_DNS_INTERNAL_4 (-168)
#define SL_NET_APP_DNS_INTERNAL_5 (-169)
#define SL_NET_APP_DNS_INTERNAL_6 (-170)
#define SL_NET_APP_DNS_INTERNAL_7 (-171)
#define SL_NET_APP_DNS_INTERNAL_8 (-172)
#define SL_NET_APP_DNS_INTERNAL_9 (-173)
#define SL_NET_APP_DNS_MISMATCHED_RESPONSE (-174) /* Server response type does not match the query request*/
#define SL_NET_APP_DNS_INTERNAL_10 (-175)
#define SL_NET_APP_DNS_INTERNAL_11 (-176)
#define SL_NET_APP_DNS_NO_ANSWER (-177) /* No response for one-shot query */
#define SL_NET_APP_DNS_NO_KNOWN_ANSWER (-178) /* No known answer for query */
#define SL_NET_APP_DNS_NAME_MISMATCH (-179) /* Illegal service name according to the RFC */
#define SL_NET_APP_DNS_NOT_STARTED (-180) /* mDNS is not running */
#define SL_NET_APP_DNS_HOST_NAME_ERROR (-181) /* Host name error. Host name format is not allowed according to RFC 1033,1034,1035, 6763 */
#define SL_NET_APP_DNS_NO_MORE_ENTRIES (-182) /* No more entries be found. */
#define SL_NET_APP_DNS_MAX_SERVICES_ERROR (-200) /* Maximum advertise services are already configured */
#define SL_NET_APP_DNS_IDENTICAL_SERVICES_ERROR (-201) /* Trying to register a service that is already exists */
#define SL_NET_APP_DNS_NOT_EXISTED_SERVICE_ERROR (-203) /* Trying to delete service that does not existed */
#define SL_NET_APP_DNS_ERROR_SERVICE_NAME_ERROR (-204) /* Illegal service name according to the RFC */
#define SL_NET_APP_DNS_RX_PACKET_ALLOCATION_ERROR (-205) /* Retry request */
#define SL_NET_APP_DNS_BUFFER_SIZE_ERROR (-206) /* List size buffer is bigger than internally allowed in the NWP */
#define SL_NET_APP_DNS_NET_APP_SET_ERROR (-207) /* Illegal length of one of the mDNS Set functions */
#define SL_NET_APP_DNS_GET_SERVICE_LIST_FLAG_ERROR (-208)
#define SL_NET_APP_DNS_NO_CONFIGURATION_ERROR (-209)
/* Set Dev name error codes (NETAPP_SET_GET_DEV_CONF_OPT_DEVICE_URN) */
#define SL_ERROR_DEVICE_NAME_LEN_ERR (-117)
#define SL_ERROR_DEVICE_NAME_INVALID (-118)
/* Set domain name error codes (NETAPP_SET_GET_DEV_CONF_OPT_DOMAIN_NAME) */
#define SL_ERROR_DOMAIN_NAME_LEN_ERR (-119)
#define SL_ERROR_DOMAIN_NAME_INVALID (-120)
/********************************************************************************************************/
/* NetApp application IDs */
#define SL_NET_APP_HTTP_SERVER_ID (1)
#define SL_NET_APP_DHCP_SERVER_ID (2)
#define SL_NET_APP_MDNS_ID (4)
#define SL_NET_APP_DNS_SERVER_ID (8)
#define SL_NET_APP_DEVICE_CONFIG_ID (16)
/* NetApp application set/get options */
#define NETAPP_SET_DHCP_SRV_BASIC_OPT (0)
/* HTTP server set/get options */
#define NETAPP_SET_GET_HTTP_OPT_PORT_NUMBER (0)
#define NETAPP_SET_GET_HTTP_OPT_AUTH_CHECK (1)
#define NETAPP_SET_GET_HTTP_OPT_AUTH_NAME (2)
#define NETAPP_SET_GET_HTTP_OPT_AUTH_PASSWORD (3)
#define NETAPP_SET_GET_HTTP_OPT_AUTH_REALM (4)
#define NETAPP_SET_GET_HTTP_OPT_ROM_PAGES_ACCESS (5)
#define NETAPP_SET_GET_MDNS_CONT_QUERY_OPT (1)
#define NETAPP_SET_GET_MDNS_QEVETN_MASK_OPT (2)
#define NETAPP_SET_GET_MDNS_TIMING_PARAMS_OPT (3)
/* DNS server set/get options */
#define NETAPP_SET_GET_DNS_OPT_DOMAIN_NAME (0)
/* Device Config set/get options */
#define NETAPP_SET_GET_DEV_CONF_OPT_DEVICE_URN (0)
#define NETAPP_SET_GET_DEV_CONF_OPT_DOMAIN_NAME (1)
/*****************************************************************************/
/* Structure/Enum declarations */
/*****************************************************************************/
typedef struct
{
_u32 PacketsSent;
_u32 PacketsReceived;
_u16 MinRoundTime;
_u16 MaxRoundTime;
_u16 AvgRoundTime;
_u32 TestTime;
}SlPingReport_t;
typedef struct
{
_u32 PingIntervalTime; /* delay between pings, in milliseconds */
_u16 PingSize; /* ping packet size in bytes */
_u16 PingRequestTimeout; /* timeout time for every ping in milliseconds */
_u32 TotalNumberOfAttempts; /* max number of ping requests. 0 - forever */
_u32 Flags; /* flag - 0 report only when finished, 1 - return response for every ping, 2 - stop after 1 successful ping. */
_u32 Ip; /* IPv4 address or IPv6 first 4 bytes */
_u32 Ip1OrPaadding;
_u32 Ip2OrPaadding;
_u32 Ip3OrPaadding;
}SlPingStartCommand_t;
typedef struct _slHttpServerString_t
{
_u8 len;
_u8 *data;
} slHttpServerString_t;
typedef struct _slHttpServerData_t
{
_u8 value_len;
_u8 name_len;
_u8 *token_value;
_u8 *token_name;
} slHttpServerData_t;
typedef struct _slHttpServerPostData_t
{
slHttpServerString_t action;
slHttpServerString_t token_name;
slHttpServerString_t token_value;
}slHttpServerPostData_t;
typedef union
{
slHttpServerString_t httpTokenName; /* SL_NETAPP_HTTPGETTOKENVALUE */
slHttpServerPostData_t httpPostData; /* SL_NETAPP_HTTPPOSTTOKENVALUE */
} SlHttpServerEventData_u;
typedef union
{
slHttpServerString_t token_value;
} SlHttpServerResponsedata_u;
typedef struct
{
_u32 Event;
SlHttpServerEventData_u EventData;
}SlHttpServerEvent_t;
typedef struct
{
_u32 Response;
SlHttpServerResponsedata_u ResponseData;
}SlHttpServerResponse_t;
typedef struct
{
_u32 lease_time;
_u32 ipv4_addr_start;
_u32 ipv4_addr_last;
}SlNetAppDhcpServerBasicOpt_t;
/*mDNS parameters*/
typedef enum
{
SL_NET_APP_FULL_SERVICE_WITH_TEXT_IPV4_TYPE = 1,
SL_NET_APP_FULL_SERVICE_IPV4_TYPE,
SL_NET_APP_SHORT_SERVICE_IPV4_TYPE
} SlNetAppGetServiceListType_e;
typedef struct
{
_u32 service_ipv4;
_u16 service_port;
_u16 Reserved;
}SlNetAppGetShortServiceIpv4List_t;
typedef struct
{
_u32 service_ipv4;
_u16 service_port;
_u16 Reserved;
_u8 service_name[NETAPP_MAX_SERVICE_NAME_SIZE];
_u8 service_host[NETAPP_MAX_SERVICE_HOST_NAME_SIZE];
}SlNetAppGetFullServiceIpv4List_t;
typedef struct
{
_u32 service_ipv4;
_u16 service_port;
_u16 Reserved;
_u8 service_name[NETAPP_MAX_SERVICE_NAME_SIZE];
_u8 service_host[NETAPP_MAX_SERVICE_HOST_NAME_SIZE];
_u8 service_text[NETAPP_MAX_SERVICE_TEXT_SIZE];
}SlNetAppGetFullServiceWithTextIpv4List_t;
typedef struct
{
/*The below parameters are used to configure the advertise times and interval
For example:
If:
Period is set to T
Repetitions are set to P
Telescopic factor is K=2
The transmission shall be:
advertise P times
wait T
advertise P times
wait 4 * T
advertise P time
wait 16 * T ... (till max time reached / configuration changed / query issued)
*/
_u32 t; /* Number of ticks for the initial period. Default is 100 ticks for 1 second. */
_u32 p; /* Number of repetitions. Default value is 1 */
_u32 k; /* Telescopic factor. Default value is 2. */
_u32 RetransInterval;/* Announcing retransmission interval */
_u32 Maxinterval; /* Announcing max period interval */
_u32 max_time; /* Announcing max time */
}SlNetAppServiceAdvertiseTimingParameters_t;
/*****************************************************************************/
/* Types declarations */
/*****************************************************************************/
typedef void (*P_SL_DEV_PING_CALLBACK)(SlPingReport_t*);
/*****************************************************************************/
/* Function prototypes */
/*****************************************************************************/
/*!
\brief Starts a network application
Gets and starts network application for the current WLAN mode
\param[in] AppBitMap application bitmap, could be one or combination of the following: \n
- SL_NET_APP_HTTP_SERVER_ID
- SL_NET_APP_DHCP_SERVER_ID
- SL_NET_APP_MDNS_ID
\return On error, negative number is returned
\sa Stop one or more the above started applications using sl_NetAppStop
\note This command activates the application for the current WLAN mode (AP or STA)
\warning
\par Example:
\code
For example: Starting internal HTTP server + DHCP server:
sl_NetAppStart(SL_NET_APP_HTTP_SERVER_ID | SL_NET_APP_DHCP_SERVER_ID)
\endcode
*/
#if _SL_INCLUDE_FUNC(sl_NetAppStart)
_i16 sl_NetAppStart(_u32 AppBitMap);
#endif
/*!
\brief Stops a network application
Gets and stops network application for the current WLAN mode
\param[in] AppBitMap application id, could be one of the following: \n
- SL_NET_APP_HTTP_SERVER_ID
- SL_NET_APP_DHCP_SERVER_ID
- SL_NET_APP_MDNS_ID
\return On error, negative number is returned
\sa
\note This command disables the application for the current active WLAN mode (AP or STA)
\warning
\par Example:
\code
For example: Stopping internal HTTP server:
sl_NetAppStop(SL_NET_APP_HTTP_SERVER_ID);
\endcode
*/
#if _SL_INCLUDE_FUNC(sl_NetAppStop)
_i16 sl_NetAppStop(_u32 AppBitMap);
#endif
/*!
\brief Get host IP by name
Obtain the IP Address of machine on network, by machine name.
\param[in] hostname host name
\param[in] usNameLen name length
\param[out] out_ip_addr This parameter is filled in with
host IP address. In case that host name is not
resolved, out_ip_addr is zero.
\param[in] family protocol family
\return On success, 0 is returned.
On error, negative is returned
SL_POOL_IS_EMPTY may be return in case there are no resources in the system
In this case try again later or increase MAX_CONCURRENT_ACTIONS
Possible DNS error codes:
- SL_NET_APP_DNS_QUERY_NO_RESPONSE
- SL_NET_APP_DNS_NO_SERVER
- SL_NET_APP_DNS_QUERY_FAILED
- SL_NET_APP_DNS_MALFORMED_PACKET
- SL_NET_APP_DNS_MISMATCHED_RESPONSE
\sa
\note Only one sl_NetAppDnsGetHostByName can be handled at a time.
Calling this API while the same command is called from another thread, may result
in one of the two scenarios:
1. The command will wait (internal) until the previous command finish, and then be executed.
2. There are not enough resources and POOL_IS_EMPTY error will return.
In this case, MAX_CONCURRENT_ACTIONS can be increased (result in memory increase) or try
again later to issue the command.
\warning
\par Example:
\code
_u32 DestinationIP;
sl_NetAppDnsGetHostByName("www.google.com", strlen("www.google.com"), &DestinationIP,SL_AF_INET);
Addr.sin_family = SL_AF_INET;
Addr.sin_port = sl_Htons(80);
Addr.sin_addr.s_addr = sl_Htonl(DestinationIP);
AddrSize = sizeof(SlSockAddrIn_t);
SockID = sl_Socket(SL_AF_INET,SL_SOCK_STREAM, 0);
\endcode
*/
#if _SL_INCLUDE_FUNC(sl_NetAppDnsGetHostByName)
_i16 sl_NetAppDnsGetHostByName(_i8 * hostname, _u16 usNameLen, _u32* out_ip_addr,_u8 family );
#endif
/*!
\brief Return service attributes like IP address, port and text according to service name
\par
The user sets a service name Full/Part (see example below), and should get:
- IP of service
- The port of service
- The text of service
Hence it can make a connection to the specific service and use it.
It is similar to get host by name method.
It is done by a single shot query with PTR type on the service name.
The command that is sent is from constant parameters and variables parameters.
\param[in] pService Service name can be full or partial. \n
Example for full service name:
1. PC1._ipp._tcp.local
2. PC2_server._ftp._tcp.local \n
.
Example for partial service name:
1. _ipp._tcp.local
2. _ftp._tcp.local
\param[in] ServiceLen The length of the service name (in_pService).
\param[in] Family IPv4 or IPv6 (SL_AF_INET , SL_AF_INET6).
\param[out] pAddr Contains the IP address of the service.
\param[out] pPort Contains the port of the service.
\param[out] pTextLen Has 2 options. One as Input field and the other one as output:
- Input: \n
Contains the max length of the text that the user wants to get.\n
It means that if the text len of service is bigger that its value than
the text is cut to inout_TextLen value.
- Output: \n
Contain the length of the text that is returned. Can be full text or part of the text (see above).
\param[out] pOut_pText Contains the text of the service full or partial
\return On success, zero is returned
SL_POOL_IS_EMPTY may be return in case there are no resources in the system
In this case try again later or increase MAX_CONCURRENT_ACTIONS
In case No service is found error SL_NET_APP_DNS_NO_ANSWER will be returned
\note The returns attributes belongs to the first service found.
There may be other services with the same service name that will response to the query.
The results of these responses are saved in the peer cache of the Device and should be read by another API.
Only one sl_NetAppDnsGetHostByService can be handled at a time.
Calling this API while the same command is called from another thread, may result
in one of the two scenarios:
1. The command will wait (internal) until the previous command finish, and then be executed.
2. There are not enough resources and SL_POOL_IS_EMPTY error will return.
In this case, MAX_CONCURRENT_ACTIONS can be increased (result in memory increase) or try
again later to issue the command.
\warning Text length can be 120 bytes only
*/
#if _SL_INCLUDE_FUNC(sl_NetAppDnsGetHostByService)
_i32 sl_NetAppDnsGetHostByService(_i8 *pServiceName, /* string containing all (or only part): name + subtype + service */
_u8 ServiceLen,
_u8 Family, /* 4-IPv4 , 16-IPv6 */
_u32 pAddr[],
_u32 *pPort,
_u16 *pTextLen, /* in: max len , out: actual len */
_i8 *pText
);
#endif
/*!
\brief Get service List
Insert into out pBuffer a list of peer's services that are the NWP.
The list is in a form of service struct. The user should chose the type
of the service struct like:
- Full service parameters with text.
- Full service parameters.
- Short service parameters (port and IP only) especially for tiny hosts.
The different types of struct are made to give the
Possibility to save memory in the host
The user also chose how many max services to get and start point index
NWP peer cache.
For example:
1. Get max of 3 full services from index 0.Up to 3 full services
from index 0 are inserted into pBuffer (services that are in indexes 0,1,2).
2. Get max of 4 full services from index 3.Up to 4 full services
from index 3 are inserted into pBuffer (services that are in indexes 3,4,5,6).
3. Get max of 2 int services from index 6.Up to 2 int services
from index 6 are inserted into pBuffer (services that are in indexes 6,7).
See below - command parameters.
\param[in] indexOffset - The start index in the peer cache that from it the first service is returned.
\param[in] MaxServiceCount - The Max services that can be returned if existed or if not exceed the max index
in the peer cache
\param[in] Flags - an ENUM number that means which service struct to use (means which types of service to fill)
- use SlNetAppGetFullServiceWithTextIpv4List_t
- use SlNetAppGetFullServiceIpv4List_t
- use SlNetAppGetShortServiceIpv4List_t
\param[out] Buffer - The Services are inserted into this buffer. In the struct form according to the bit that is set in the Flags
input parameter.
\return ServiceFoundCount - The number of the services that were inserted into the buffer. zero means no service is found
negative number means an error
\sa sl_NetAppMDNSRegisterService
\note
\warning
if the out pBuffer size is bigger than an RX packet(1480), than
an error is returned because there
is no place in the RX packet.
The size is a multiply of MaxServiceCount and size of service struct(that is set
according to flag value).
*/
#if _SL_INCLUDE_FUNC(sl_NetAppGetServiceList)
_i16 sl_NetAppGetServiceList(_u8 IndexOffest,
_u8 MaxServiceCount,
_u8 Flags,
_i8 *pBuffer,
_u32 RxBufferLength
);
#endif
/*!
\brief Unregister mDNS service
This function deletes the mDNS service from the mDNS package and the database.
The mDNS service that is to be unregistered is a service that the application no longer wishes to provide. \n
The service name should be the full service name according to RFC
of the DNS-SD - meaning the value in name field in the SRV answer.
Examples for service names:
1. PC1._ipp._tcp.local
2. PC2_server._ftp._tcp.local
\param[in] pServiceName Full service name. \n
Example for service name:
1. PC1._ipp._tcp.local
2. PC2_server._ftp._tcp.local
\param[in] ServiceLen The length of the service.
\return On success, zero is returned
\sa sl_NetAppMDNSRegisterService
\note
\warning
The size of the service length should be smaller than 255.
*/
#if _SL_INCLUDE_FUNC(sl_NetAppMDNSUnRegisterService)
_i16 sl_NetAppMDNSUnRegisterService(const _i8 *pServiceName,_u8 ServiceNameLen);
#endif
/*!
\brief Register a new mDNS service
\par
This function registers a new mDNS service to the mDNS package and the DB.
This registered service is a service offered by the application.
The service name should be full service name according to RFC
of the DNS-SD - meaning the value in name field in the SRV answer.
Example for service name:
1. PC1._ipp._tcp.local
2. PC2_server._ftp._tcp.local
If the option is_unique is set, mDNS probes the service name to make sure
it is unique before starting to announce the service on the network.
Instance is the instance portion of the service name.
\param[in] ServiceLen The length of the service.
\param[in] TextLen The length of the service should be smaller than 64.
\param[in] port The port on this target host port.
\param[in] TTL The TTL of the service
\param[in] Options bitwise parameters: \n
- bit 0 - service is unique (means that the service needs to be unique)
- bit 31 - for internal use if the service should be added or deleted (set means ADD).
- bit 1-30 for future.
\param[in] pServiceName The service name.
Example for service name: \n
1. PC1._ipp._tcp.local
2. PC2_server._ftp._tcp.local
\param[in] pText The description of the service.
should be as mentioned in the RFC
(according to type of the service IPP,FTP...)
\return On success, zero is returned
Possible error codes:
- Maximum advertise services are already configured.
Delete another existed service that is registered and then register again the new service
- Trying to register a service that is already exists
- Trying to delete service that does not existed
- Illegal service name according to the RFC
- Retry request
- Illegal length of one of the mDNS Set functions
- mDNS is not operational as the device has no IP.Connect the device to an AP to get an IP address.
- mDNS parameters error
- mDNS internal cache error
- mDNS internal error
- Adding a service is not allowed as it is already exist (duplicate service)
- mDNS is not running
- Host name error. Host name format is not allowed according to RFC 1033,1034,1035, 6763
- List size buffer is bigger than internally allowed in the NWP (API get service list),
change the APIs� parameters to decrease the size of the list
\sa sl_NetAppMDNSUnRegisterService
\warning 1) Temporary - there is an allocation on stack of internal buffer.
Its size is NETAPP_MDNS_MAX_SERVICE_NAME_AND_TEXT_LENGTH. \n
It means that the sum of the text length and service name length cannot be bigger than
NETAPP_MDNS_MAX_SERVICE_NAME_AND_TEXT_LENGTH.\n
If it is - An error is returned. \n
2) According to now from certain constraints the variables parameters are set in the
attribute part (contain constant parameters)
*/
#if _SL_INCLUDE_FUNC(sl_NetAppMDNSRegisterService)
_i16 sl_NetAppMDNSRegisterService( const _i8* pServiceName,
_u8 ServiceNameLen,
const _i8* pText,
_u8 TextLen,
_u16 Port,
_u32 TTL,
_u32 Options);
#endif
/*!
\brief send ICMP ECHO_REQUEST to network hosts
Ping uses the ICMP protocol's mandatory ECHO_REQUEST
\param[in] pPingParams Pointer to the ping request structure: \n
- if flags parameter is set to 0, ping will report back once all requested pings are done (as defined by TotalNumberOfAttempts). \n
- if flags parameter is set to 1, ping will report back after every ping, for TotalNumberOfAttempts.
- if flags parameter is set to 2, ping will stop after the first successful ping, and report back for the successful ping, as well as any preceding failed ones.
For stopping an ongoing ping activity, set parameters IP address to 0
\param[in] family SL_AF_INET or SL_AF_INET6
\param[out] pReport Ping pReport
\param[out] pCallback Callback function upon completion.
If callback is NULL, the API is blocked until data arrives
\return On success, zero is returned. On error, -1 is returned
SL_POOL_IS_EMPTY may be return in case there are no resources in the system
In this case try again later or increase MAX_CONCURRENT_ACTIONS
\sa sl_NetAppPingReport
\note Only one sl_NetAppPingStart can be handled at a time.
Calling this API while the same command is called from another thread, may result
in one of the two scenarios:
1. The command will wait (internal) until the previous command finish, and then be executed.
2. There are not enough resources and SL_POOL_IS_EMPTY error will return.
In this case, MAX_CONCURRENT_ACTIONS can be increased (result in memory increase) or try
again later to issue the command.
\warning
\par Example:
\code
An example of sending 20 ping requests and reporting results to a callback routine when
all requests are sent:
// callback routine
void pingRes(SlPingReport_t* pReport)
{
// handle ping results
}
// ping activation
void PingTest()
{
SlPingReport_t report;
SlPingStartCommand_t pingCommand;
pingCommand.Ip = SL_IPV4_VAL(10,1,1,200); // destination IP address is 10.1.1.200
pingCommand.PingSize = 150; // size of ping, in bytes
pingCommand.PingIntervalTime = 100; // delay between pings, in milliseconds
pingCommand.PingRequestTimeout = 1000; // timeout for every ping in milliseconds
pingCommand.TotalNumberOfAttempts = 20; // max number of ping requests. 0 - forever
pingCommand.Flags = 0; // report only when finished
sl_NetAppPingStart( &pingCommand, SL_AF_INET, &report, pingRes ) ;
}
\endcode
*/
#if _SL_INCLUDE_FUNC(sl_NetAppPingStart)
_i16 sl_NetAppPingStart(SlPingStartCommand_t* pPingParams,_u8 family,SlPingReport_t *pReport,const P_SL_DEV_PING_CALLBACK pPingCallback);
#endif
/*!
\brief Internal function for setting network application configurations
\return On success, zero is returned. On error, -1 is
returned
\param[in] AppId Application id, could be one of the following: \n
- SL_NET_APP_HTTP_SERVER_ID
- SL_NET_APP_DHCP_SERVER_ID
- SL_NET_APP_DHCP_SERVER_ID
\param[in] SetOptions set option, could be one of the following: \n
NETAPP_SET_BASIC_OPT
\param[in] OptionLen option structure length
\param[in] pOptionValues pointer to the option structure
\sa
\note
\warning
\par
\code
Set DHCP Server (AP mode) parameters example:
SlNetAppDhcpServerBasicOpt_t dhcpParams;
_u8 outLen = sizeof(SlNetAppDhcpServerBasicOpt_t);
dhcpParams.lease_time = 4096; // lease time (in seconds) of the IP Address
dhcpParams.ipv4_addr_start = SL_IPV4_VAL(192,168,1,10); // first IP Address for allocation. IP Address should be set as Hex number - i.e. 0A0B0C01 for (10.11.12.1)
dhcpParams.ipv4_addr_last = SL_IPV4_VAL(192,168,1,16); // last IP Address for allocation. IP Address should be set as Hex number - i.e. 0A0B0C01 for (10.11.12.1)
sl_NetAppStop(SL_NET_APP_DHCP_SERVER_ID); // Stop DHCP server before settings
sl_NetAppSet(SL_NET_APP_DHCP_SERVER_ID, NETAPP_SET_DHCP_SRV_BASIC_OPT, outLen, (_u8* )&dhcpParams); // set parameters
sl_NetAppStart(SL_NET_APP_DHCP_SERVER_ID); // Start DHCP server with new settings
\endcode
\code
Set Device URN name example:
Device name, maximum length of 33 characters
Device name affects URN name, own SSID name in AP mode, and WPS file "device name" in WPS I.E (STA-WPS / P2P)
In case no device URN name set, the default name is "mysimplelink"
Allowed characters in device name are: 'a - z' , 'A - Z' , '0-9' and '-'
_u8 *my_device = "MY-SIMPLELINK-DEV";
sl_NetAppSet (SL_NET_APP_DEVICE_CONFIG_ID, NETAPP_SET_GET_DEV_CONF_OPT_DEVICE_URN, strlen(my_device), (_u8 *) my_device);
\endcode
*/
#if _SL_INCLUDE_FUNC(sl_NetAppSet)
_i32 sl_NetAppSet(_u8 AppId ,_u8 Option,_u8 OptionLen, _u8 *pOptionValue);
#endif
/*!
\brief Internal function for getting network applications configurations
\return On success, zero is returned. On error, -1 is
returned
\param[in] AppId Application id, could be one of the following: \n
- SL_NET_APP_HTTP_SERVER_ID
- SL_NET_APP_DHCP_SERVER_ID
\param[in] Options Get option, could be one of the following: \n
NETAPP_SET_BASIC_OPT
\param[in] OptionLen The length of the allocated memory as input, when the
function complete, the value of this parameter would be
the len that actually read from the device.
If the device return length that is longer from the input
value, the function will cut the end of the returned structure
and will return ESMALLBUF
\param[out] pValues pointer to the option structure which will be filled with the response from the device
\sa
\note
\warning
\par
\code
Get DHCP Server parameters example:
SlNetAppDhcpServerBasicOpt_t dhcpParams;
_u8 outLen = sizeof(SlNetAppDhcpServerBasicOpt_t);
sl_NetAppGet(SL_NET_APP_DHCP_SERVER_ID, NETAPP_SET_DHCP_SRV_BASIC_OPT, &outLen, (_u8* )&dhcpParams);
printf("DHCP Start IP %d.%d.%d.%d End IP %d.%d.%d.%d Lease time seconds %d\n",
SL_IPV4_BYTE(dhcpParams.ipv4_addr_start,3),SL_IPV4_BYTE(dhcpParams.ipv4_addr_start,2),
SL_IPV4_BYTE(dhcpParams.ipv4_addr_start,1),SL_IPV4_BYTE(dhcpParams.ipv4_addr_start,0),
SL_IPV4_BYTE(dhcpParams.ipv4_addr_last,3),SL_IPV4_BYTE(dhcpParams.ipv4_addr_last,2),
SL_IPV4_BYTE(dhcpParams.ipv4_addr_last,1),SL_IPV4_BYTE(dhcpParams.ipv4_addr_last,0),
dhcpParams.lease_time);
\endcode
\code
Get Device URN name example:
Maximum length of 33 characters of device name.
Device name affects URN name, own SSID name in AP mode, and WPS file "device name" in WPS I.E (STA-WPS / P2P)
in case no device URN name set, the default name is "mysimplelink"
_u8 my_device_name[35];
sl_NetAppGet (SL_NET_APP_DEVICE_CONFIG_ID, NETAPP_SET_GET_DEV_CONF_OPT_DEVICE_URN, strlen(my_device_name), (_u8 *)my_device_name);
\endcode
*/
#if _SL_INCLUDE_FUNC(sl_NetAppGet)
_i32 sl_NetAppGet(_u8 AppId, _u8 Option,_u8 *pOptionLen, _u8 *pOptionValue);
#endif
/*!
Close the Doxygen group.
@}
*/
#ifdef __cplusplus
}
#endif /* __cplusplus */
#endif /* __NETAPP_H__ */