File content as of revision 1:e448e81c416f:

/*
 * sl_config.h - get time sample application
 *
 * Copyright (C) 2014 Texas Instruments Incorporated - http://www.ti.com/
 *
 *
 *  Redistribution and use in source and binary forms, with or without
 *  modification, are permitted provided that the following conditions
 *  are met:
 *
 *    Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 *
 *    Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the
 *    distribution.
 *
 *    Neither the name of Texas Instruments Incorporated nor the names of
 *    its contributors may be used to endorse or promote products derived
 *    from this software without specific prior written permission.
 *
 *  THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS
 *  "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT
 *  LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR
 *  A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT
 *  OWNER OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
 *  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT
 *  LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 *  DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 *  THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
 *  OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 */

#ifndef SL_CONFIG_H_
#define SL_CONFIG_H_

#include "mbed.h"

//*****************************************************************************
//
// If building with a C++ compiler, make all of the definitions in this header
// have a C binding.
//
//*****************************************************************************

/**/

namespace mbed_cc3100 {

#define LOOP_FOREVER() \
            {\
                while(1); \
            }

#define ASSERT_ON_ERROR(error_code) \
            {\
                /* Handling the error-codes is specific to the application */ \
                if (error_code < 0) return error_code; \
                /* else, continue w/ execution */ \
            }


/*
 * Values for below macros shall be modified per the access-point's (AP) properties
 * SimpleLink device will connect to following AP when the application is executed
 */
#define SSID_NAME         "********"
//#define SSID_NAME       "OpenWrt"         /* Access point name to connect to. */
#define SEC_TYPE        SL_SEC_TYPE_WPA_WPA2    /* Security type of the Access point */
#define PASSKEY           "************"
//#define PASSKEY         "*********"                  /* Password in case of secure AP */
#define PASSKEY_LEN     strlen(PASSKEY)  /* Password length in case of secure AP */

/* Configuration of the device when it comes up in AP mode */
#define SSID_AP_MODE       "mysimplelink"       /* SSID of the CC3100 in AP mode */
#define PASSWORD_AP_MODE   ""                  /* Password of CC3100 AP */
#define SEC_TYPE_AP_MODE   SL_SEC_TYPE_OPEN    /* Can take SL_SEC_TYPE_WEP or
* SL_SEC_TYPE_WPA as well */

/*
 * Values for below macros shall be modified based on current time
 */
#define DATE        26      /* Current Date */
#define MONTH       4       /* Month */
#define YEAR        2015    /* Current year */
#define HOUR        17      /* Time - hours */
#define MINUTE      06      /* Time - minutes */
#define SECOND      0       /* Time - seconds */

#define SUCCESS             0

}//namespace mbed_cc3100

#endif /*__SL_CONFIG_H__*/