Devin Alexander / USBDeviceHT

I changed one line of code in the file with path name: USBDeviceHT/targets/TARGET_Maxim

Fork of USBDeviceHT by Helmut Tschemernjak

targets/TARGET_RENESAS/TARGET_VK_RZ_A1H/usb0/src/function/usb0_function_sig.c@6:c1f162fd7777, 2018-06-01 (annotated)

Committer:
dev_alexander
Date:
Fri Jun 01 21:43:55 2018 +0000
Revision:
6:c1f162fd7777
Parent:
0:a3ea811f80f2 
Fixed Error with code not compiling due to an issue with there not being a (uint32_t) cast of a (void) pointer. Maxim was the only mbed vendor to not have this one (uint32_t) cast in the spot it was added to. Look into public repos for similar cases.

Who changed what in which revision?

UserRevisionLine numberNew contents of line
Helmut64 0:a3ea811f80f2 1 /*******************************************************************************
Helmut64 0:a3ea811f80f2 2 * DISCLAIMER
Helmut64 0:a3ea811f80f2 3 * This software is supplied by Renesas Electronics Corporation and is only
Helmut64 0:a3ea811f80f2 4 * intended for use with Renesas products. No other uses are authorized. This
Helmut64 0:a3ea811f80f2 5 * software is owned by Renesas Electronics Corporation and is protected under
Helmut64 0:a3ea811f80f2 6 * all applicable laws, including copyright laws.
Helmut64 0:a3ea811f80f2 7 * THIS SOFTWARE IS PROVIDED "AS IS" AND RENESAS MAKES NO WARRANTIES REGARDING
Helmut64 0:a3ea811f80f2 8 * THIS SOFTWARE, WHETHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING BUT NOT
Helmut64 0:a3ea811f80f2 9 * LIMITED TO WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE
Helmut64 0:a3ea811f80f2 10 * AND NON-INFRINGEMENT. ALL SUCH WARRANTIES ARE EXPRESSLY DISCLAIMED.
Helmut64 0:a3ea811f80f2 11 * TO THE MAXIMUM EXTENT PERMITTED NOT PROHIBITED BY LAW, NEITHER RENESAS
Helmut64 0:a3ea811f80f2 12 * ELECTRONICS CORPORATION NOR ANY OF ITS AFFILIATED COMPANIES SHALL BE LIABLE
Helmut64 0:a3ea811f80f2 13 * FOR ANY DIRECT, INDIRECT, SPECIAL, INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
Helmut64 0:a3ea811f80f2 14 * ANY REASON RELATED TO THIS SOFTWARE, EVEN IF RENESAS OR ITS AFFILIATES HAVE
Helmut64 0:a3ea811f80f2 15 * BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
Helmut64 0:a3ea811f80f2 16 * Renesas reserves the right, without notice, to make changes to this software
Helmut64 0:a3ea811f80f2 17 * and to discontinue the availability of this software. By using this software,
Helmut64 0:a3ea811f80f2 18 * you agree to the additional terms and conditions found by accessing the
Helmut64 0:a3ea811f80f2 19 * following link:
Helmut64 0:a3ea811f80f2 20 * http://www.renesas.com/disclaimer
Helmut64 0:a3ea811f80f2 21 * Copyright (C) 2012 - 2014 Renesas Electronics Corporation. All rights reserved.
Helmut64 0:a3ea811f80f2 22 *******************************************************************************/
Helmut64 0:a3ea811f80f2 23 /*******************************************************************************
Helmut64 0:a3ea811f80f2 24 * File Name : usb0_function_sig.c
Helmut64 0:a3ea811f80f2 25 * $Rev: 1116 $
Helmut64 0:a3ea811f80f2 26 * $Date:: 2014-07-09 16:29:19 +0900#$
Helmut64 0:a3ea811f80f2 27 * Device(s) : RZ/A1H
Helmut64 0:a3ea811f80f2 28 * Tool-Chain :
Helmut64 0:a3ea811f80f2 29 * OS : None
Helmut64 0:a3ea811f80f2 30 * H/W Platform :
Helmut64 0:a3ea811f80f2 31 * Description : RZ/A1H R7S72100 USB Sample Program
Helmut64 0:a3ea811f80f2 32 * Operation :
Helmut64 0:a3ea811f80f2 33 * Limitations :
Helmut64 0:a3ea811f80f2 34 *******************************************************************************/
Helmut64 0:a3ea811f80f2 35
Helmut64 0:a3ea811f80f2 36
Helmut64 0:a3ea811f80f2 37 /*******************************************************************************
Helmut64 0:a3ea811f80f2 38 Includes <System Includes> , "Project Includes"
Helmut64 0:a3ea811f80f2 39 *******************************************************************************/
Helmut64 0:a3ea811f80f2 40 #include "usb0_function.h"
Helmut64 0:a3ea811f80f2 41
Helmut64 0:a3ea811f80f2 42
Helmut64 0:a3ea811f80f2 43 /*******************************************************************************
Helmut64 0:a3ea811f80f2 44 Typedef definitions
Helmut64 0:a3ea811f80f2 45 *******************************************************************************/
Helmut64 0:a3ea811f80f2 46
Helmut64 0:a3ea811f80f2 47
Helmut64 0:a3ea811f80f2 48 /*******************************************************************************
Helmut64 0:a3ea811f80f2 49 Macro definitions
Helmut64 0:a3ea811f80f2 50 *******************************************************************************/
Helmut64 0:a3ea811f80f2 51
Helmut64 0:a3ea811f80f2 52
Helmut64 0:a3ea811f80f2 53 /*******************************************************************************
Helmut64 0:a3ea811f80f2 54 Imported global variables and functions (from other files)
Helmut64 0:a3ea811f80f2 55 *******************************************************************************/
Helmut64 0:a3ea811f80f2 56
Helmut64 0:a3ea811f80f2 57
Helmut64 0:a3ea811f80f2 58 /*******************************************************************************
Helmut64 0:a3ea811f80f2 59 Exported global variables and functions (to be accessed by other files)
Helmut64 0:a3ea811f80f2 60 *******************************************************************************/
Helmut64 0:a3ea811f80f2 61 static void usb0_function_EnableINTModule(void);
Helmut64 0:a3ea811f80f2 62
Helmut64 0:a3ea811f80f2 63
Helmut64 0:a3ea811f80f2 64 /*******************************************************************************
Helmut64 0:a3ea811f80f2 65 Private global variables and functions
Helmut64 0:a3ea811f80f2 66 *******************************************************************************/
Helmut64 0:a3ea811f80f2 67
Helmut64 0:a3ea811f80f2 68
Helmut64 0:a3ea811f80f2 69 /*******************************************************************************
Helmut64 0:a3ea811f80f2 70 * Function Name: usb0_function_InitModule
Helmut64 0:a3ea811f80f2 71 * Description : Initializes the USB module in the USB function mode.
Helmut64 0:a3ea811f80f2 72 * Arguments : uint16_t mode ; USB_FUNCTION_HIGH_SPEED ; Hi-Speed Mode
Helmut64 0:a3ea811f80f2 73 * : ; other ; Full-speed Mode
Helmut64 0:a3ea811f80f2 74 * Return Value : none
Helmut64 0:a3ea811f80f2 75 *******************************************************************************/
Helmut64 0:a3ea811f80f2 76 void usb0_function_InitModule (uint16_t mode)
Helmut64 0:a3ea811f80f2 77 {
Helmut64 0:a3ea811f80f2 78 RZA_IO_RegWrite_16(&USB200.SYSCFG0,
Helmut64 0:a3ea811f80f2 79 0,
Helmut64 0:a3ea811f80f2 80 USB_SYSCFG_DCFM_SHIFT,
Helmut64 0:a3ea811f80f2 81 USB_SYSCFG_DCFM); /* USB function */
Helmut64 0:a3ea811f80f2 82
Helmut64 0:a3ea811f80f2 83 /* USB module operation enabled */
Helmut64 0:a3ea811f80f2 84 RZA_IO_RegWrite_16(&USB200.SYSCFG0,
Helmut64 0:a3ea811f80f2 85 1,
Helmut64 0:a3ea811f80f2 86 USB_SYSCFG_USBE_SHIFT,
Helmut64 0:a3ea811f80f2 87 USB_SYSCFG_USBE);
Helmut64 0:a3ea811f80f2 88
Helmut64 0:a3ea811f80f2 89 if (mode == USB_FUNCTION_HIGH_SPEED)
Helmut64 0:a3ea811f80f2 90 {
Helmut64 0:a3ea811f80f2 91 RZA_IO_RegWrite_16(&USB200.SYSCFG0,
Helmut64 0:a3ea811f80f2 92 1,
Helmut64 0:a3ea811f80f2 93 USB_SYSCFG_HSE_SHIFT,
Helmut64 0:a3ea811f80f2 94 USB_SYSCFG_HSE); /* Hi-Speed Mode */
Helmut64 0:a3ea811f80f2 95 }
Helmut64 0:a3ea811f80f2 96 else
Helmut64 0:a3ea811f80f2 97 {
Helmut64 0:a3ea811f80f2 98 RZA_IO_RegWrite_16(&USB200.SYSCFG0,
Helmut64 0:a3ea811f80f2 99 0,
Helmut64 0:a3ea811f80f2 100 USB_SYSCFG_HSE_SHIFT,
Helmut64 0:a3ea811f80f2 101 USB_SYSCFG_HSE);
Helmut64 0:a3ea811f80f2 102 }
Helmut64 0:a3ea811f80f2 103
Helmut64 0:a3ea811f80f2 104 /* for power-on */
Helmut64 0:a3ea811f80f2 105 if (usb0_function_CheckVBUStaus() == DEVDRV_USBF_ON)
Helmut64 0:a3ea811f80f2 106 {
Helmut64 0:a3ea811f80f2 107 usb0_function_EnableINTModule(); /* Interrupt Enable */
Helmut64 0:a3ea811f80f2 108 usb0_function_USB_FUNCTION_Attach(); /* pull-up D+ and open D- */
Helmut64 0:a3ea811f80f2 109 }
Helmut64 0:a3ea811f80f2 110 else
Helmut64 0:a3ea811f80f2 111 {
Helmut64 0:a3ea811f80f2 112 usb0_function_USB_FUNCTION_Detach(); /* USB Detach */
Helmut64 0:a3ea811f80f2 113 /* with Interrupt Enable */
Helmut64 0:a3ea811f80f2 114 }
Helmut64 0:a3ea811f80f2 115 }
Helmut64 0:a3ea811f80f2 116
Helmut64 0:a3ea811f80f2 117 /*******************************************************************************
Helmut64 0:a3ea811f80f2 118 * Function Name: usb0_function_CheckVBUStaus
Helmut64 0:a3ea811f80f2 119 * Description : Checks the USB-VBUS state to returns the connection state to
Helmut64 0:a3ea811f80f2 120 * : the USB host.
Helmut64 0:a3ea811f80f2 121 * Arguments : none
Helmut64 0:a3ea811f80f2 122 * Return Value : DEVDRV_USBF_ON : VBUS ON
Helmut64 0:a3ea811f80f2 123 * : DEVDRV_USBF_OFF : VBUS OFF
Helmut64 0:a3ea811f80f2 124 *******************************************************************************/
Helmut64 0:a3ea811f80f2 125 uint16_t usb0_function_CheckVBUStaus (void)
Helmut64 0:a3ea811f80f2 126 {
Helmut64 0:a3ea811f80f2 127 uint16_t buf1;
Helmut64 0:a3ea811f80f2 128 uint16_t buf2;
Helmut64 0:a3ea811f80f2 129 uint16_t buf3;
Helmut64 0:a3ea811f80f2 130
Helmut64 0:a3ea811f80f2 131 /* monitor VBUS pins */
Helmut64 0:a3ea811f80f2 132 do
Helmut64 0:a3ea811f80f2 133 {
Helmut64 0:a3ea811f80f2 134 buf1 = RZA_IO_RegRead_16(&USB200.INTSTS0,
Helmut64 0:a3ea811f80f2 135 USB_INTSTS0_VBSTS_SHIFT,
Helmut64 0:a3ea811f80f2 136 USB_INTSTS0_VBSTS);
Helmut64 0:a3ea811f80f2 137 Userdef_USB_usb0_function_delay_10us(1);
Helmut64 0:a3ea811f80f2 138 buf2 = RZA_IO_RegRead_16(&USB200.INTSTS0,
Helmut64 0:a3ea811f80f2 139 USB_INTSTS0_VBSTS_SHIFT,
Helmut64 0:a3ea811f80f2 140 USB_INTSTS0_VBSTS);
Helmut64 0:a3ea811f80f2 141 Userdef_USB_usb0_function_delay_10us(1);
Helmut64 0:a3ea811f80f2 142 buf3 = RZA_IO_RegRead_16(&USB200.INTSTS0,
Helmut64 0:a3ea811f80f2 143 USB_INTSTS0_VBSTS_SHIFT,
Helmut64 0:a3ea811f80f2 144 USB_INTSTS0_VBSTS);
Helmut64 0:a3ea811f80f2 145 } while ((buf1 != buf2) || (buf2 != buf3));
Helmut64 0:a3ea811f80f2 146
Helmut64 0:a3ea811f80f2 147 if (buf1 == DEVDRV_USBF_OFF)
Helmut64 0:a3ea811f80f2 148 {
Helmut64 0:a3ea811f80f2 149 return DEVDRV_USBF_OFF; /* detach */
Helmut64 0:a3ea811f80f2 150 }
Helmut64 0:a3ea811f80f2 151
Helmut64 0:a3ea811f80f2 152 return DEVDRV_USBF_ON; /* attach */
Helmut64 0:a3ea811f80f2 153 }
Helmut64 0:a3ea811f80f2 154
Helmut64 0:a3ea811f80f2 155 /*******************************************************************************
Helmut64 0:a3ea811f80f2 156 * Function Name: usb0_function_USB_FUNCTION_Attach
Helmut64 0:a3ea811f80f2 157 * Description : Connects to the USB host controller.
Helmut64 0:a3ea811f80f2 158 * : This function pulls up D+.
Helmut64 0:a3ea811f80f2 159 * Arguments : none
Helmut64 0:a3ea811f80f2 160 * Return Value : none
Helmut64 0:a3ea811f80f2 161 *******************************************************************************/
Helmut64 0:a3ea811f80f2 162 void usb0_function_USB_FUNCTION_Attach (void)
Helmut64 0:a3ea811f80f2 163 {
Helmut64 0:a3ea811f80f2 164 Userdef_USB_usb0_function_attach();
Helmut64 0:a3ea811f80f2 165
Helmut64 0:a3ea811f80f2 166 Userdef_USB_usb0_function_delay_xms(10);
Helmut64 0:a3ea811f80f2 167
Helmut64 0:a3ea811f80f2 168 RZA_IO_RegWrite_16(&USB200.SYSCFG0,
Helmut64 0:a3ea811f80f2 169 1,
Helmut64 0:a3ea811f80f2 170 USB_SYSCFG_DPRPU_SHIFT,
Helmut64 0:a3ea811f80f2 171 USB_SYSCFG_DPRPU); /* Pull-up D+ and open D- */
Helmut64 0:a3ea811f80f2 172 }
Helmut64 0:a3ea811f80f2 173
Helmut64 0:a3ea811f80f2 174 /*******************************************************************************
Helmut64 0:a3ea811f80f2 175 * Function Name: usb0_function_USB_FUNCTION_Detach
Helmut64 0:a3ea811f80f2 176 * Description : Disconnects from the USB host controller.
Helmut64 0:a3ea811f80f2 177 * : This function opens D+/D-.
Helmut64 0:a3ea811f80f2 178 * Arguments : none
Helmut64 0:a3ea811f80f2 179 * Return Value : none
Helmut64 0:a3ea811f80f2 180 *******************************************************************************/
Helmut64 0:a3ea811f80f2 181 void usb0_function_USB_FUNCTION_Detach (void)
Helmut64 0:a3ea811f80f2 182 {
Helmut64 0:a3ea811f80f2 183 uint16_t pipe;
Helmut64 0:a3ea811f80f2 184
Helmut64 0:a3ea811f80f2 185 Userdef_USB_usb0_function_detach();
Helmut64 0:a3ea811f80f2 186
Helmut64 0:a3ea811f80f2 187 for (pipe = 0; pipe < (USB_FUNCTION_MAX_PIPE_NO + 1); ++pipe)
Helmut64 0:a3ea811f80f2 188 {
Helmut64 0:a3ea811f80f2 189 if (g_usb0_function_pipe_status[pipe] != DEVDRV_USBF_PIPE_IDLE)
Helmut64 0:a3ea811f80f2 190 {
Helmut64 0:a3ea811f80f2 191 usb0_function_stop_transfer(pipe);
Helmut64 0:a3ea811f80f2 192 }
Helmut64 0:a3ea811f80f2 193 }
Helmut64 0:a3ea811f80f2 194
Helmut64 0:a3ea811f80f2 195 RZA_IO_RegWrite_16(&USB200.SYSCFG0,
Helmut64 0:a3ea811f80f2 196 0,
Helmut64 0:a3ea811f80f2 197 USB_SYSCFG_DPRPU_SHIFT,
Helmut64 0:a3ea811f80f2 198 USB_SYSCFG_DPRPU); /* open D+ and D- */
Helmut64 0:a3ea811f80f2 199
Helmut64 0:a3ea811f80f2 200 /* Detach Recovery */
Helmut64 0:a3ea811f80f2 201 Userdef_USB_usb0_function_delay_500ns(); /* need 1us=500ns * 2 wait */
Helmut64 0:a3ea811f80f2 202 Userdef_USB_usb0_function_delay_500ns();
Helmut64 0:a3ea811f80f2 203
Helmut64 0:a3ea811f80f2 204 RZA_IO_RegWrite_16(&USB200.SYSCFG0,
Helmut64 0:a3ea811f80f2 205 1,
Helmut64 0:a3ea811f80f2 206 USB_SYSCFG_DCFM_SHIFT,
Helmut64 0:a3ea811f80f2 207 USB_SYSCFG_DCFM);
Helmut64 0:a3ea811f80f2 208 Userdef_USB_usb0_function_delay_500ns(); /* need 100ns wait but 500ns S/W wait */
Helmut64 0:a3ea811f80f2 209
Helmut64 0:a3ea811f80f2 210 RZA_IO_RegWrite_16(&USB200.SYSCFG0,
Helmut64 0:a3ea811f80f2 211 0,
Helmut64 0:a3ea811f80f2 212 USB_SYSCFG_DCFM_SHIFT,
Helmut64 0:a3ea811f80f2 213 USB_SYSCFG_DCFM);
Helmut64 0:a3ea811f80f2 214
Helmut64 0:a3ea811f80f2 215 RZA_IO_RegWrite_16(&USB200.SYSCFG0,
Helmut64 0:a3ea811f80f2 216 0,
Helmut64 0:a3ea811f80f2 217 USB_SYSCFG_USBE_SHIFT,
Helmut64 0:a3ea811f80f2 218 USB_SYSCFG_USBE); /* soft reset module */
Helmut64 0:a3ea811f80f2 219 Userdef_USB_usb0_function_delay_500ns();
Helmut64 0:a3ea811f80f2 220
Helmut64 0:a3ea811f80f2 221 RZA_IO_RegWrite_16(&USB200.SYSCFG0,
Helmut64 0:a3ea811f80f2 222 1,
Helmut64 0:a3ea811f80f2 223 USB_SYSCFG_USBE_SHIFT,
Helmut64 0:a3ea811f80f2 224 USB_SYSCFG_USBE);
Helmut64 0:a3ea811f80f2 225
Helmut64 0:a3ea811f80f2 226 usb0_function_EnableINTModule(); /* Interrupt Enable */
Helmut64 0:a3ea811f80f2 227 }
Helmut64 0:a3ea811f80f2 228
Helmut64 0:a3ea811f80f2 229 /*******************************************************************************
Helmut64 0:a3ea811f80f2 230 * Function Name: usb0_function_USB_FUNCTION_BusReset
Helmut64 0:a3ea811f80f2 231 * Description : This function is executed when the USB device is transitioned
Helmut64 0:a3ea811f80f2 232 * : to POWERD_STATE. Sets the device descriptor according to the
Helmut64 0:a3ea811f80f2 233 * : connection speed determined by the USB reset hand shake.
Helmut64 0:a3ea811f80f2 234 * Arguments : none
Helmut64 0:a3ea811f80f2 235 * Return Value : none
Helmut64 0:a3ea811f80f2 236 *******************************************************************************/
Helmut64 0:a3ea811f80f2 237 #if 0 /*The USBHAL in mbed does not need this function*/
Helmut64 0:a3ea811f80f2 238 void usb0_function_USB_FUNCTION_BusReset (void)
Helmut64 0:a3ea811f80f2 239 {
Helmut64 0:a3ea811f80f2 240 usb0_function_init_status(); /* memory clear */
Helmut64 0:a3ea811f80f2 241
Helmut64 0:a3ea811f80f2 242 if (usb0_function_is_hispeed() == USB_FUNCTION_HIGH_SPEED)
Helmut64 0:a3ea811f80f2 243 {
Helmut64 0:a3ea811f80f2 244 usb0_function_ResetDescriptor(USB_FUNCTION_HIGH_SPEED); /* Device Descriptor reset */
Helmut64 0:a3ea811f80f2 245 }
Helmut64 0:a3ea811f80f2 246 else
Helmut64 0:a3ea811f80f2 247 {
Helmut64 0:a3ea811f80f2 248 usb0_function_ResetDescriptor(USB_FUNCTION_FULL_SPEED); /* Device Descriptor reset */
Helmut64 0:a3ea811f80f2 249 }
Helmut64 0:a3ea811f80f2 250
Helmut64 0:a3ea811f80f2 251 usb0_function_ResetDCP(); /* Default Control PIPE reset */
Helmut64 0:a3ea811f80f2 252 }
Helmut64 0:a3ea811f80f2 253 #endif
Helmut64 0:a3ea811f80f2 254
Helmut64 0:a3ea811f80f2 255 /*******************************************************************************
Helmut64 0:a3ea811f80f2 256 * Function Name: usb0_function_USB_FUNCTION_Resume
Helmut64 0:a3ea811f80f2 257 * Description : This function is executed when the USB device detects a resume
Helmut64 0:a3ea811f80f2 258 * : signal.
Helmut64 0:a3ea811f80f2 259 * : The USB sample driver does not operate for this function.
Helmut64 0:a3ea811f80f2 260 * Arguments : none
Helmut64 0:a3ea811f80f2 261 * Return Value : none
Helmut64 0:a3ea811f80f2 262 *******************************************************************************/
Helmut64 0:a3ea811f80f2 263 #if 0 /*The USBHAL in mbed does not need this function*/
Helmut64 0:a3ea811f80f2 264 void usb0_function_USB_FUNCTION_Resume (void)
Helmut64 0:a3ea811f80f2 265 {
Helmut64 0:a3ea811f80f2 266 /* NOP */
Helmut64 0:a3ea811f80f2 267 }
Helmut64 0:a3ea811f80f2 268 #endif
Helmut64 0:a3ea811f80f2 269
Helmut64 0:a3ea811f80f2 270 /*******************************************************************************
Helmut64 0:a3ea811f80f2 271 * Function Name: usb0_function_USB_FUNCTION_Suspend
Helmut64 0:a3ea811f80f2 272 * Description : This function is executed when the USB device detects a suspend
Helmut64 0:a3ea811f80f2 273 * : signal.
Helmut64 0:a3ea811f80f2 274 * : The USB sample driver does not operate for this function.
Helmut64 0:a3ea811f80f2 275 * Arguments : none
Helmut64 0:a3ea811f80f2 276 * Return Value : none
Helmut64 0:a3ea811f80f2 277 *******************************************************************************/
Helmut64 0:a3ea811f80f2 278 #if 0 /*The USBHAL in mbed does not need this function*/
Helmut64 0:a3ea811f80f2 279 void usb0_function_USB_FUNCTION_Suspend (void)
Helmut64 0:a3ea811f80f2 280 {
Helmut64 0:a3ea811f80f2 281 /* NOP */
Helmut64 0:a3ea811f80f2 282 }
Helmut64 0:a3ea811f80f2 283 #endif
Helmut64 0:a3ea811f80f2 284
Helmut64 0:a3ea811f80f2 285 /*******************************************************************************
Helmut64 0:a3ea811f80f2 286 * Function Name: usb0_function_USB_FUNCTION_TestMode
Helmut64 0:a3ea811f80f2 287 * Description : This function is executed when the USB device is transitioned U
Helmut64 0:a3ea811f80f2 288 * : to TEST_MODE by the USB standard request.
Helmut64 0:a3ea811f80f2 289 * Arguments : none
Helmut64 0:a3ea811f80f2 290 * Return Value : none
Helmut64 0:a3ea811f80f2 291 *******************************************************************************/
Helmut64 0:a3ea811f80f2 292 void usb0_function_USB_FUNCTION_TestMode (void)
Helmut64 0:a3ea811f80f2 293 {
Helmut64 0:a3ea811f80f2 294 switch (g_usb0_function_TestModeSelectors & USB_FUNCTION_FUNCTION_TEST_SELECT)
Helmut64 0:a3ea811f80f2 295 {
Helmut64 0:a3ea811f80f2 296 case USB_FUNCTION_FUNCTION_TEST_J:
Helmut64 0:a3ea811f80f2 297 case USB_FUNCTION_FUNCTION_TEST_K:
Helmut64 0:a3ea811f80f2 298 case USB_FUNCTION_FUNCTION_TEST_SE0_NAK:
Helmut64 0:a3ea811f80f2 299 case USB_FUNCTION_FUNCTION_TEST_PACKET:
Helmut64 0:a3ea811f80f2 300 RZA_IO_RegWrite_16(&USB200.TESTMODE,
Helmut64 0:a3ea811f80f2 301 (g_usb0_function_TestModeSelectors >> 8),
Helmut64 0:a3ea811f80f2 302 USB_TESTMODE_UTST_SHIFT,
Helmut64 0:a3ea811f80f2 303 USB_TESTMODE_UTST);
Helmut64 0:a3ea811f80f2 304 break;
Helmut64 0:a3ea811f80f2 305
Helmut64 0:a3ea811f80f2 306 case USB_FUNCTION_FUNCTION_TEST_FORCE_ENABLE:
Helmut64 0:a3ea811f80f2 307 default:
Helmut64 0:a3ea811f80f2 308 break;
Helmut64 0:a3ea811f80f2 309 }
Helmut64 0:a3ea811f80f2 310 }
Helmut64 0:a3ea811f80f2 311
Helmut64 0:a3ea811f80f2 312 /*******************************************************************************
Helmut64 0:a3ea811f80f2 313 * Function Name: usb0_function_EnableINTModule
Helmut64 0:a3ea811f80f2 314 * Description : Enables USB interrupt.
Helmut64 0:a3ea811f80f2 315 * Arguments : none
Helmut64 0:a3ea811f80f2 316 * Return Value : none
Helmut64 0:a3ea811f80f2 317 *******************************************************************************/
Helmut64 0:a3ea811f80f2 318 static void usb0_function_EnableINTModule (void)
Helmut64 0:a3ea811f80f2 319 {
Helmut64 0:a3ea811f80f2 320 uint16_t buf;
Helmut64 0:a3ea811f80f2 321
Helmut64 0:a3ea811f80f2 322 buf = USB200.INTENB0;
Helmut64 0:a3ea811f80f2 323 buf |= (USB_FUNCTION_BITVBSE | USB_FUNCTION_BITDVSE | USB_FUNCTION_BITCTRE |
Helmut64 0:a3ea811f80f2 324 USB_FUNCTION_BITBEMPE | USB_FUNCTION_BITNRDYE | USB_FUNCTION_BITBRDYE);
Helmut64 0:a3ea811f80f2 325 USB200.INTENB0 = buf;
Helmut64 0:a3ea811f80f2 326
Helmut64 0:a3ea811f80f2 327 usb0_function_enable_bemp_int(USB_FUNCTION_PIPE0);
Helmut64 0:a3ea811f80f2 328 }
Helmut64 0:a3ea811f80f2 329
Helmut64 0:a3ea811f80f2 330 /* End of File */