I made a fork of a generic library that was developed with support for RFM95 LoRa module that I found online. I Made a few changes and made it compatible with hardware limitations of the MAX32620FTHR and MAX32630FTHR module.
Dependents: MAX326xxFTHR_LoRa_RFM95 MAX326xxFTHR_LoRa_PingPong MAX326xxFTHR_RFM95_LoRa_PingPong MAX326xxFTHR_LoRa_RFM95_PingPong_Example ... more
Fork of SX1276GenericLib by
Diff: sx1276/sx1276.cpp
- Revision:
- 0:e6ceb13d2d05
- Child:
- 4:f0ce52e94d3f
diff -r 000000000000 -r e6ceb13d2d05 sx1276/sx1276.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/sx1276/sx1276.cpp Mon Aug 18 14:24:46 2014 +0000 @@ -0,0 +1,1308 @@ +/* + / _____) _ | | +( (____ _____ ____ _| |_ _____ ____| |__ + \____ \| ___ | (_ _) ___ |/ ___) _ \ + _____) ) ____| | | || |_| ____( (___| | | | +(______/|_____)_|_|_| \__)_____)\____)_| |_| +( C )2014 Semtech + +Description: Actual implementation of a SX1276 radio, inherits Radio + +License: Revised BSD License, see LICENSE.TXT file include in the project + +Maintainers: Miguel Luis, Gregory Cristian and Nicolas Huguenin +*/ +#include "sx1276.h" + +#include "debug.h" + +const FskBandwidth_t SX1276::FskBandwidths[] = +{ + { 2600 , 0x17 }, + { 3100 , 0x0F }, + { 3900 , 0x07 }, + { 5200 , 0x16 }, + { 6300 , 0x0E }, + { 7800 , 0x06 }, + { 10400 , 0x15 }, + { 12500 , 0x0D }, + { 15600 , 0x05 }, + { 20800 , 0x14 }, + { 25000 , 0x0C }, + { 31300 , 0x04 }, + { 41700 , 0x13 }, + { 50000 , 0x0B }, + { 62500 , 0x03 }, + { 83333 , 0x12 }, + { 100000, 0x0A }, + { 125000, 0x02 }, + { 166700, 0x11 }, + { 200000, 0x09 }, + { 250000, 0x01 } +}; + + +SX1276::SX1276( void ( *txDone )( ), void ( *txTimeout ) ( ), void ( *rxDone ) ( uint8_t *payload, uint16_t size, int8_t rssi, int8_t snr ), void ( *rxTimeout ) ( ), void ( *rxError ) ( ), + PinName mosi, PinName miso, PinName sclk, PinName nss, PinName reset, + PinName dio0, PinName dio1, PinName dio2, PinName dio3, PinName dio4, PinName dio5 ) + : Radio( txDone, txTimeout, rxDone, rxTimeout, rxError ), + spi( mosi, miso, sclk ), + nss( nss ), + reset( reset ), + dio0( dio0 ), dio1( dio1 ), dio2( dio2 ), dio3( dio3 ), dio4( dio4 ), dio5( dio5 ), + isRadioActive( false ) +{ + wait_ms( 10 ); + this->rxTx = 0; + this->rxBuffer = new uint8_t[RX_BUFFER_SIZE]; + previousOpMode = RF_OPMODE_STANDBY; + + this->dioIrq = new DioIrqHandler[6]; + + this->dioIrq[0] = &SX1276::OnDio0Irq; + this->dioIrq[1] = &SX1276::OnDio1Irq; + this->dioIrq[2] = &SX1276::OnDio2Irq; + this->dioIrq[3] = &SX1276::OnDio3Irq; + this->dioIrq[4] = &SX1276::OnDio4Irq; + this->dioIrq[5] = NULL; +} + +SX1276::~SX1276( ) +{ + delete this->rxBuffer; + delete this->dioIrq; +} + +void SX1276::RxChainCalibration( void ) +{ + uint8_t regPaConfigInitVal; + uint32_t initialFreq; + + // Save context + regPaConfigInitVal = this->Read( REG_PACONFIG ); + initialFreq = ( double )( ( ( uint32_t )this->Read( REG_FRFMSB ) << 16 ) | + ( ( uint32_t )this->Read( REG_FRFMID ) << 8 ) | + ( ( uint32_t )this->Read( REG_FRFLSB ) ) ) * ( double )FREQ_STEP; + + // Cut the PA just in case, RFO output, power = -1 dBm + this->Write( REG_PACONFIG, 0x00 ); + + // Launch Rx chain calibration for LF band + Write ( REG_IMAGECAL, ( Read( REG_IMAGECAL ) & RF_IMAGECAL_IMAGECAL_MASK ) | RF_IMAGECAL_IMAGECAL_START ); + while( ( Read( REG_IMAGECAL ) & RF_IMAGECAL_IMAGECAL_RUNNING ) == RF_IMAGECAL_IMAGECAL_RUNNING ) + { + } + + // Sets a Frequency in HF band + settings.Channel= 868000000 ; + + // Launch Rx chain calibration for HF band + Write ( REG_IMAGECAL, ( Read( REG_IMAGECAL ) & RF_IMAGECAL_IMAGECAL_MASK ) | RF_IMAGECAL_IMAGECAL_START ); + while( ( Read( REG_IMAGECAL ) & RF_IMAGECAL_IMAGECAL_RUNNING ) == RF_IMAGECAL_IMAGECAL_RUNNING ) + { + } + + // Restore context + this->Write( REG_PACONFIG, regPaConfigInitVal ); + SetChannel( initialFreq ); +} + +RadioState SX1276::GetState( void ) +{ + return this->settings.State; +} + +void SX1276::SetChannel( uint32_t freq ) +{ + this->settings.Channel = freq; + freq = ( uint32_t )( ( double )freq / ( double )FREQ_STEP ); + Write( REG_FRFMSB, ( uint8_t )( ( freq >> 16 ) & 0xFF ) ); + Write( REG_FRFMID, ( uint8_t )( ( freq >> 8 ) & 0xFF ) ); + Write( REG_FRFLSB, ( uint8_t )( freq & 0xFF ) ); +} + +bool SX1276::IsChannelFree( ModemType modem, uint32_t freq, int8_t rssiThresh ) +{ + int8_t rssi = 0; + + SetModem( modem ); + + SetChannel( freq ); + + SetOpMode( RF_OPMODE_RECEIVER ); + + wait( 0.001 ); + + rssi = GetRssi( modem ); + + Sleep( ); + + if( rssi > rssiThresh ) + { + return false; + } + return true; +} + +uint32_t SX1276::Random( void ) +{ + uint8_t i; + uint32_t rnd = 0; + + /* + * Radio setup for random number generation + */ + // Set LoRa modem ON + SetModem( MODEM_LORA ); + + // Disable LoRa modem interrupts + Write( REG_LR_IRQFLAGSMASK, RFLR_IRQFLAGS_RXTIMEOUT | + RFLR_IRQFLAGS_RXDONE | + RFLR_IRQFLAGS_PAYLOADCRCERROR | + RFLR_IRQFLAGS_VALIDHEADER | + RFLR_IRQFLAGS_TXDONE | + RFLR_IRQFLAGS_CADDONE | + RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL | + RFLR_IRQFLAGS_CADDETECTED ); + + // Set radio in continuous reception + SetOpMode( RF_OPMODE_RECEIVER ); + + for( i = 0; i < 32; i++ ) + { + wait( 0.001 ); + // Unfiltered RSSI value reading. Only takes the LSB value + rnd |= ( ( uint32_t )Read( REG_LR_RSSIWIDEBAND ) & 0x01 ) << i; + } + + Sleep( ); + + return rnd; +} + +/*! + * Returns the known FSK bandwidth registers value + * + * \param [IN] bandwidth Bandwidth value in Hz + * \retval regValue Bandwidth register value. + */ +uint8_t SX1276::GetFskBandwidthRegValue( uint32_t bandwidth ) +{ + uint8_t i; + + for( i = 0; i < ( sizeof( FskBandwidths ) / sizeof( FskBandwidth_t ) ) - 1; i++ ) + { + if( ( bandwidth >= FskBandwidths[i].bandwidth ) && ( bandwidth < FskBandwidths[i + 1].bandwidth ) ) + { + return FskBandwidths[i].RegValue; + } + } + // ERROR: Value not found + while( 1 ); +} + +void SX1276::SetRxConfig( ModemType modem, uint32_t bandwidth, + uint32_t datarate, uint8_t coderate, + uint32_t bandwidthAfc, uint16_t preambleLen, + uint16_t symbTimeout, bool fixLen, + bool crcOn, bool iqInverted, bool rxContinuous ) +{ + SetModem( modem ); + + switch( modem ) + { + case MODEM_FSK: + { + this->settings.Fsk.Bandwidth = bandwidth; + this->settings.Fsk.Datarate = datarate; + this->settings.Fsk.BandwidthAfc = bandwidthAfc; + this->settings.Fsk.FixLen = fixLen; + this->settings.Fsk.CrcOn = crcOn; + this->settings.Fsk.IqInverted = iqInverted; + this->settings.Fsk.RxContinuous = rxContinuous; + this->settings.Fsk.PreambleLen = preambleLen; + + datarate = ( uint16_t )( ( double )XTAL_FREQ / ( double )datarate ); + Write( REG_BITRATEMSB, ( uint8_t )( datarate >> 8 ) ); + Write( REG_BITRATELSB, ( uint8_t )( datarate & 0xFF ) ); + + Write( REG_RXBW, GetFskBandwidthRegValue( bandwidth ) ); + Write( REG_AFCBW, GetFskBandwidthRegValue( bandwidthAfc ) ); + + Write( REG_LR_PREAMBLEMSB, ( uint8_t )( ( preambleLen >> 8 ) & 0xFF ) ); + Write( REG_LR_PREAMBLELSB, ( uint8_t )( preambleLen & 0xFF ) ); + + Write( REG_PACKETCONFIG1, + ( Read( REG_PACKETCONFIG1 ) & + RF_PACKETCONFIG1_CRC_MASK & + RF_PACKETCONFIG1_PACKETFORMAT_MASK ) | + ( ( fixLen == 1 ) ? RF_PACKETCONFIG1_PACKETFORMAT_FIXED : RF_PACKETCONFIG1_PACKETFORMAT_VARIABLE ) | + ( crcOn << 4 ) ); + } + break; + case MODEM_LORA: + { + if( bandwidth > 2 ) + { + // Fatal error: When using LoRa modem only bandwidths 125, 250 and 500 kHz are supported + while( 1 ); + } + bandwidth += 7; + this->settings.LoRa.Bandwidth = bandwidth; + this->settings.LoRa.Datarate = datarate; + this->settings.LoRa.Coderate = coderate; + this->settings.LoRa.FixLen = fixLen; + this->settings.LoRa.CrcOn = crcOn; + this->settings.LoRa.IqInverted = iqInverted; + this->settings.LoRa.RxContinuous = rxContinuous; + + if( datarate > 12 ) + { + datarate = 12; + } + else if( datarate < 6 ) + { + datarate = 6; + } + + if( ( ( bandwidth == 7 ) && ( ( datarate == 11 ) || ( datarate == 12 ) ) ) || + ( ( bandwidth == 8 ) && ( datarate == 12 ) ) ) + { + this->settings.LoRa.LowDatarateOptimize = 0x01; + } + else + { + this->settings.LoRa.LowDatarateOptimize = 0x00; + } + + Write( REG_LR_MODEMCONFIG1, + ( Read( REG_LR_MODEMCONFIG1 ) & + RFLR_MODEMCONFIG1_BW_MASK & + RFLR_MODEMCONFIG1_CODINGRATE_MASK & + RFLR_MODEMCONFIG1_IMPLICITHEADER_MASK ) | + ( bandwidth << 4 ) | ( coderate << 1 ) | + fixLen ); + + Write( REG_LR_MODEMCONFIG2, + ( Read( REG_LR_MODEMCONFIG2 ) & + RFLR_MODEMCONFIG2_SF_MASK & + RFLR_MODEMCONFIG2_RXPAYLOADCRC_MASK & + RFLR_MODEMCONFIG2_SYMBTIMEOUTMSB_MASK ) | + ( datarate << 4 ) | ( crcOn << 2 ) | + ( ( symbTimeout >> 8 ) & ~RFLR_MODEMCONFIG2_SYMBTIMEOUTMSB_MASK ) ); + + Write( REG_LR_MODEMCONFIG3, + ( Read( REG_LR_MODEMCONFIG3 ) & + RFLR_MODEMCONFIG3_LOWDATARATEOPTIMIZE_MASK ) | + ( this->settings.LoRa.LowDatarateOptimize << 3 ) ); + + Write( REG_LR_SYMBTIMEOUTLSB, ( uint8_t )( symbTimeout & 0xFF ) ); + + Write( REG_LR_PREAMBLEMSB, ( uint8_t )( ( preambleLen >> 8 ) & 0xFF ) ); + Write( REG_LR_PREAMBLELSB, ( uint8_t )( preambleLen & 0xFF ) ); + + if( datarate == 6 ) + { + Write( REG_LR_DETECTOPTIMIZE, + ( Read( REG_LR_DETECTOPTIMIZE ) & + RFLR_DETECTIONOPTIMIZE_MASK ) | + RFLR_DETECTIONOPTIMIZE_SF6 ); + Write( REG_LR_DETECTIONTHRESHOLD, + RFLR_DETECTIONTHRESH_SF6 ); + } + else + { + Write( REG_LR_DETECTOPTIMIZE, + ( Read( REG_LR_DETECTOPTIMIZE ) & + RFLR_DETECTIONOPTIMIZE_MASK ) | + RFLR_DETECTIONOPTIMIZE_SF7_TO_SF12 ); + Write( REG_LR_DETECTIONTHRESHOLD, + RFLR_DETECTIONTHRESH_SF7_TO_SF12 ); + } + } + break; + } +} + +void SX1276::SetTxConfig( ModemType modem, int8_t power, uint32_t fdev, + uint32_t bandwidth, uint32_t datarate, + uint8_t coderate, uint16_t preambleLen, + bool fixLen, bool crcOn, + bool iqInverted, uint32_t timeout ) +{ + uint8_t paConfig = 0; + uint8_t paDac = 0; + + SetModem( modem ); + + paConfig = Read( REG_PACONFIG ); + paDac = Read( REG_PADAC ); + + paConfig = ( paConfig & RF_PACONFIG_PASELECT_MASK ) | GetPaSelect( this->settings.Channel ); + paConfig = ( paConfig & RF_PACONFIG_MAX_POWER_MASK ) | 0x70; + + if( ( paConfig & RF_PACONFIG_PASELECT_PABOOST ) == RF_PACONFIG_PASELECT_PABOOST ) + { + if( power > 17 ) + { + paDac = ( paDac & RF_PADAC_20DBM_MASK ) | RF_PADAC_20DBM_ON; + } + else + { + paDac = ( paDac & RF_PADAC_20DBM_MASK ) | RF_PADAC_20DBM_OFF; + } + if( ( paDac & RF_PADAC_20DBM_ON ) == RF_PADAC_20DBM_ON ) + { + if( power < 5 ) + { + power = 5; + } + if( power > 20 ) + { + power = 20; + } + paConfig = ( paConfig & RF_PACONFIG_OUTPUTPOWER_MASK ) | ( uint8_t )( ( uint16_t )( power - 5 ) & 0x0F ); + } + else + { + if( power < 2 ) + { + power = 2; + } + if( power > 17 ) + { + power = 17; + } + paConfig = ( paConfig & RF_PACONFIG_OUTPUTPOWER_MASK ) | ( uint8_t )( ( uint16_t )( power - 2 ) & 0x0F ); + } + } + else + { + if( power < -1 ) + { + power = -1; + } + if( power > 14 ) + { + power = 14; + } + paConfig = ( paConfig & RF_PACONFIG_OUTPUTPOWER_MASK ) | ( uint8_t )( ( uint16_t )( power + 1 ) & 0x0F ); + } + Write( REG_PACONFIG, paConfig ); + Write( REG_PADAC, paDac ); + + switch( modem ) + { + case MODEM_FSK: + { + this->settings.Fsk.Power = power; + this->settings.Fsk.Fdev = fdev; + this->settings.Fsk.Bandwidth = bandwidth; + this->settings.Fsk.Datarate = datarate; + this->settings.Fsk.PreambleLen = preambleLen; + this->settings.Fsk.FixLen = fixLen; + this->settings.Fsk.CrcOn = crcOn; + this->settings.Fsk.IqInverted = iqInverted; + this->settings.Fsk.TxTimeout = timeout; + + fdev = ( uint16_t )( ( double )fdev / ( double )FREQ_STEP ); + Write( REG_FDEVMSB, ( uint8_t )( fdev >> 8 ) ); + Write( REG_FDEVLSB, ( uint8_t )( fdev & 0xFF ) ); + + datarate = ( uint16_t )( ( double )XTAL_FREQ / ( double )datarate ); + Write( REG_BITRATEMSB, ( uint8_t )( datarate >> 8 ) ); + Write( REG_BITRATELSB, ( uint8_t )( datarate & 0xFF ) ); + + Write( REG_PREAMBLEMSB, ( preambleLen >> 8 ) & 0x00FF ); + Write( REG_PREAMBLELSB, preambleLen & 0xFF ); + + Write( REG_PACKETCONFIG1, + ( Read( REG_PACKETCONFIG1 ) & + RF_PACKETCONFIG1_CRC_MASK & + RF_PACKETCONFIG1_PACKETFORMAT_MASK ) | + ( ( fixLen == 1 ) ? RF_PACKETCONFIG1_PACKETFORMAT_FIXED : RF_PACKETCONFIG1_PACKETFORMAT_VARIABLE ) | + ( crcOn << 4 ) ); + + } + break; + case MODEM_LORA: + { + this->settings.LoRa.Power = power; + if( bandwidth > 2 ) + { + // Fatal error: When using LoRa modem only bandwidths 125, 250 and 500 kHz are supported + while( 1 ); + } + bandwidth += 7; + this->settings.LoRa.Bandwidth = bandwidth; + this->settings.LoRa.Datarate = datarate; + this->settings.LoRa.Coderate = coderate; + this->settings.LoRa.PreambleLen = preambleLen; + this->settings.LoRa.FixLen = fixLen; + this->settings.LoRa.CrcOn = crcOn; + this->settings.LoRa.IqInverted = iqInverted; + this->settings.LoRa.TxTimeout = timeout; + + if( datarate > 12 ) + { + datarate = 12; + } + else if( datarate < 6 ) + { + datarate = 6; + } + if( ( ( bandwidth == 7 ) && ( ( datarate == 11 ) || ( datarate == 12 ) ) ) || + ( ( bandwidth == 8 ) && ( datarate == 12 ) ) ) + { + this->settings.LoRa.LowDatarateOptimize = 0x01; + } + else + { + this->settings.LoRa.LowDatarateOptimize = 0x00; + } + + Write( REG_LR_MODEMCONFIG1, + ( Read( REG_LR_MODEMCONFIG1 ) & + RFLR_MODEMCONFIG1_BW_MASK & + RFLR_MODEMCONFIG1_CODINGRATE_MASK & + RFLR_MODEMCONFIG1_IMPLICITHEADER_MASK ) | + ( bandwidth << 4 ) | ( coderate << 1 ) | + fixLen ); + + Write( REG_LR_MODEMCONFIG2, + ( Read( REG_LR_MODEMCONFIG2 ) & + RFLR_MODEMCONFIG2_SF_MASK & + RFLR_MODEMCONFIG2_RXPAYLOADCRC_MASK ) | + ( datarate << 4 ) | ( crcOn << 2 ) ); + + Write( REG_LR_MODEMCONFIG3, + ( Read( REG_LR_MODEMCONFIG3 ) & + RFLR_MODEMCONFIG3_LOWDATARATEOPTIMIZE_MASK ) | + ( this->settings.LoRa.LowDatarateOptimize << 3 ) ); + + Write( REG_LR_PREAMBLEMSB, ( preambleLen >> 8 ) & 0x00FF ); + Write( REG_LR_PREAMBLELSB, preambleLen & 0xFF ); + + if( datarate == 6 ) + { + Write( REG_LR_DETECTOPTIMIZE, + ( Read( REG_LR_DETECTOPTIMIZE ) & + RFLR_DETECTIONOPTIMIZE_MASK ) | + RFLR_DETECTIONOPTIMIZE_SF6 ); + Write( REG_LR_DETECTIONTHRESHOLD, + RFLR_DETECTIONTHRESH_SF6 ); + } + else + { + Write( REG_LR_DETECTOPTIMIZE, + ( Read( REG_LR_DETECTOPTIMIZE ) & + RFLR_DETECTIONOPTIMIZE_MASK ) | + RFLR_DETECTIONOPTIMIZE_SF7_TO_SF12 ); + Write( REG_LR_DETECTIONTHRESHOLD, + RFLR_DETECTIONTHRESH_SF7_TO_SF12 ); + } + } + break; + } +} + +double SX1276::TimeOnAir( ModemType modem, uint8_t pktLen ) +{ + double airTime = 0.0; + + switch( modem ) + { + case MODEM_FSK: + { + airTime = floor( ( 8 * ( this->settings.Fsk.PreambleLen + + ( ( Read( REG_SYNCCONFIG ) & ~RF_SYNCCONFIG_SYNCSIZE_MASK ) + 1 ) + + ( ( this->settings.Fsk.FixLen == 0x01 ) ? 0.0 : 1.0 ) + + ( ( ( Read( REG_PACKETCONFIG1 ) & ~RF_PACKETCONFIG1_ADDRSFILTERING_MASK ) != 0x00 ) ? 1.0 : 0 ) + + pktLen + + ( ( this->settings.Fsk.CrcOn == 0x01 ) ? 2.0 : 0 ) ) / + this->settings.Fsk.Datarate ) * 1e6 ); + } + break; + case MODEM_LORA: + { + double bw = 0.0; + // REMARK: When using LoRa modem only bandwidths 125, 250 and 500 kHz are supported + switch( this->settings.LoRa.Bandwidth ) + { + //case 0: // 7.8 kHz + // bw = 78e2; + // break; + //case 1: // 10.4 kHz + // bw = 104e2; + // break; + //case 2: // 15.6 kHz + // bw = 156e2; + // break; + //case 3: // 20.8 kHz + // bw = 208e2; + // break; + //case 4: // 31.2 kHz + // bw = 312e2; + // break; + //case 5: // 41.4 kHz + // bw = 414e2; + // break; + //case 6: // 62.5 kHz + // bw = 625e2; + // break; + case 7: // 125 kHz + bw = 125e3; + break; + case 8: // 250 kHz + bw = 250e3; + break; + case 9: // 500 kHz + bw = 500e3; + break; + } + + // Symbol rate : time for one symbol (secs) + double rs = bw / ( 1 << this->settings.LoRa.Datarate ); + double ts = 1 / rs; + // time of preamble + double tPreamble = ( this->settings.LoRa.PreambleLen + 4.25 ) * ts; + // Symbol length of payload and time + double tmp = ceil( ( 8 * pktLen - 4 * this->settings.LoRa.Datarate + + 28 + 16 * this->settings.LoRa.CrcOn - + ( this->settings.LoRa.FixLen ? 20 : 0 ) ) / + ( double )( 4 * this->settings.LoRa.Datarate - + ( ( this->settings.LoRa.LowDatarateOptimize > 0 ) ? 8 : 0 ) ) ) * + ( this->settings.LoRa.Coderate + 4 ); + double nPayload = 8 + ( ( tmp > 0 ) ? tmp : 0 ); + double tPayload = nPayload * ts; + // Time on air + double tOnAir = tPreamble + tPayload; + // return us secs + airTime = floor( tOnAir * 1e6 + 0.999 ); + } + break; + } + return airTime; +} + +void SX1276::Send( uint8_t *buffer, uint8_t size ) +{ + uint32_t txTimeout = 0; + + switch( this->settings.Modem ) + { + case MODEM_FSK: + { + this->settings.FskPacketHandler.NbBytes = 0; + this->settings.FskPacketHandler.Size = size; + + if( this->settings.Fsk.FixLen == false ) + { + WriteFifo( ( uint8_t* )&size, 1 ); + } + else + { + Write( REG_PAYLOADLENGTH, size ); + } + + if( ( size > 0 ) && ( size <= 64 ) ) + { + this->settings.FskPacketHandler.ChunkSize = size; + } + else + { + this->settings.FskPacketHandler.ChunkSize = 32; + } + + // Write payload buffer + WriteFifo( buffer, this->settings.FskPacketHandler.ChunkSize ); + this->settings.FskPacketHandler.NbBytes += this->settings.FskPacketHandler.ChunkSize; + txTimeout = this->settings.Fsk.TxTimeout; + } + break; + case MODEM_LORA: + { + if( this->settings.LoRa.IqInverted == true ) + { + Write( REG_LR_INVERTIQ, ( ( Read( REG_LR_INVERTIQ ) & RFLR_INVERTIQ_TX_MASK & RFLR_INVERTIQ_RX_MASK ) | RFLR_INVERTIQ_RX_OFF | RFLR_INVERTIQ_TX_ON ) ); + } + else + { + Write( REG_LR_INVERTIQ, ( ( Read( REG_LR_INVERTIQ ) & RFLR_INVERTIQ_TX_MASK & RFLR_INVERTIQ_RX_MASK ) | RFLR_INVERTIQ_RX_OFF | RFLR_INVERTIQ_TX_OFF ) ); + } + + this->settings.LoRaPacketHandler.Size = size; + + // Initializes the payload size + Write( REG_LR_PAYLOADLENGTH, size ); + + // Full buffer used for Tx + Write( REG_LR_FIFOTXBASEADDR, 0 ); + Write( REG_LR_FIFOADDRPTR, 0 ); + + // FIFO operations can not take place in Sleep mode + if( ( Read( REG_OPMODE ) & ~RF_OPMODE_MASK ) == RF_OPMODE_SLEEP ) + { + Standby( ); + wait( 0.001 ); + } + // Write payload buffer + WriteFifo( buffer, size ); + txTimeout = this->settings.LoRa.TxTimeout; + } + break; + } + + Tx( txTimeout ); +} + +void SX1276::Sleep( void ) +{ + // Initialize driver timeout timers + txTimeoutTimer.detach( ); + rxTimeoutTimer.detach( ); + SetOpMode( RF_OPMODE_SLEEP ); +} + +void SX1276::Standby( void ) +{ + txTimeoutTimer.detach( ); + rxTimeoutTimer.detach( ); + SetOpMode( RF_OPMODE_STANDBY ); +} + +void SX1276::Rx( uint32_t timeout ) +{ + bool rxContinuous = false; + + switch( this->settings.Modem ) + { + case MODEM_FSK: + { + rxContinuous = this->settings.Fsk.RxContinuous; + + // DIO0=PayloadReady + // DIO1=FifoLevel + // DIO2=SyncAddr + // DIO3=FifoEmpty + // DIO4=Preamble + // DIO5=ModeReady + Write( REG_DIOMAPPING1, ( Read( REG_DIOMAPPING1 ) & RF_DIOMAPPING1_DIO0_MASK & + RF_DIOMAPPING1_DIO2_MASK ) | + RF_DIOMAPPING1_DIO0_00 | + RF_DIOMAPPING1_DIO2_11 ); + + Write( REG_DIOMAPPING2, ( Read( REG_DIOMAPPING2 ) & RF_DIOMAPPING2_DIO4_MASK & + RF_DIOMAPPING2_MAP_MASK ) | + RF_DIOMAPPING2_DIO4_11 | + RF_DIOMAPPING2_MAP_PREAMBLEDETECT ); + + this->settings.FskPacketHandler.FifoThresh = Read( REG_FIFOTHRESH ) & 0x3F; + + this->settings.FskPacketHandler.PreambleDetected = false; + this->settings.FskPacketHandler.SyncWordDetected = false; + this->settings.FskPacketHandler.NbBytes = 0; + this->settings.FskPacketHandler.Size = 0; + } + break; + case MODEM_LORA: + { + if( this->settings.LoRa.IqInverted == true ) + { + Write( REG_LR_INVERTIQ, ( ( Read( REG_LR_INVERTIQ ) & RFLR_INVERTIQ_TX_MASK & RFLR_INVERTIQ_RX_MASK ) | RFLR_INVERTIQ_RX_ON | RFLR_INVERTIQ_TX_OFF ) ); + } + else + { + Write( REG_LR_INVERTIQ, ( ( Read( REG_LR_INVERTIQ ) & RFLR_INVERTIQ_TX_MASK & RFLR_INVERTIQ_RX_MASK ) | RFLR_INVERTIQ_RX_OFF | RFLR_INVERTIQ_TX_OFF ) ); + } + + rxContinuous = this->settings.LoRa.RxContinuous; + + Write( REG_LR_IRQFLAGSMASK, //RFLR_IRQFLAGS_RXTIMEOUT | + //RFLR_IRQFLAGS_RXDONE | + //RFLR_IRQFLAGS_PAYLOADCRCERROR | + //RFLR_IRQFLAGS_VALIDHEADER | + RFLR_IRQFLAGS_TXDONE | + RFLR_IRQFLAGS_CADDONE | + RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL | + RFLR_IRQFLAGS_CADDETECTED ); + + // DIO0=RxDone + Write( REG_DIOMAPPING1, ( Read( REG_DIOMAPPING1 ) & RFLR_DIOMAPPING1_DIO0_MASK ) | RFLR_DIOMAPPING1_DIO0_00 ); + Write( REG_DIOMAPPING1, ( Read( REG_DIOMAPPING1 ) & RFLR_DIOMAPPING1_DIO3_MASK ) | RFLR_DIOMAPPING1_DIO3_01 ); + Write( REG_LR_FIFORXBASEADDR, 0 ); + Write( REG_LR_FIFOADDRPTR, 0 ); + } + break; + } + + memset( rxBuffer, 0, ( size_t )RX_BUFFER_SIZE ); + + this->settings.State = RX; + if( timeout != 0 ) + { + rxTimeoutTimer.attach_us( this, &SX1276::OnTimeoutIrq, timeout ); + } + + if( this->settings.Modem == MODEM_FSK ) + { + SetOpMode( RF_OPMODE_RECEIVER ); + + if( rxContinuous == false ) + { + rxTimeoutSyncWord.attach_us( this, &SX1276::OnTimeoutIrq, ( 8.0 * ( this->settings.Fsk.PreambleLen + + ( ( Read( REG_SYNCCONFIG ) & + ~RF_SYNCCONFIG_SYNCSIZE_MASK ) + + 1.0 ) + 1.0 ) / + ( double )this->settings.Fsk.Datarate ) * 1e6 ) ; + } + } + else + { + if( rxContinuous == true ) + { + SetOpMode( RFLR_OPMODE_RECEIVER ); + } + else + { + SetOpMode( RFLR_OPMODE_RECEIVER_SINGLE ); + } + } +} + +void SX1276::Tx( uint32_t timeout ) +{ + switch( this->settings.Modem ) + { + case MODEM_FSK: + { + // DIO0=PacketSent + // DIO1=FifoLevel + // DIO2=FifoFull + // DIO3=FifoEmpty + // DIO4=LowBat + // DIO5=ModeReady + Write( REG_DIOMAPPING1, ( Read( REG_DIOMAPPING1 ) & RF_DIOMAPPING1_DIO0_MASK & + RF_DIOMAPPING1_DIO2_MASK ) ); + + Write( REG_DIOMAPPING2, ( Read( REG_DIOMAPPING2 ) & RF_DIOMAPPING2_DIO4_MASK & + RF_DIOMAPPING2_MAP_MASK ) ); + this->settings.FskPacketHandler.FifoThresh = Read( REG_FIFOTHRESH ) & 0x3F; + } + break; + case MODEM_LORA: + { + Write( REG_LR_IRQFLAGSMASK, RFLR_IRQFLAGS_RXTIMEOUT | + RFLR_IRQFLAGS_RXDONE | + RFLR_IRQFLAGS_PAYLOADCRCERROR | + RFLR_IRQFLAGS_VALIDHEADER | + //RFLR_IRQFLAGS_TXDONE | + RFLR_IRQFLAGS_CADDONE | + RFLR_IRQFLAGS_FHSSCHANGEDCHANNEL | + RFLR_IRQFLAGS_CADDETECTED ); + + // DIO0=TxDone + Write( REG_DIOMAPPING1, ( Read( REG_DIOMAPPING1 ) & RFLR_DIOMAPPING1_DIO0_MASK ) | RFLR_DIOMAPPING1_DIO0_01 ); + } + break; + } + + this->settings.State = TX; + txTimeoutTimer.attach_us( this, &SX1276::OnTimeoutIrq, timeout ); + SetOpMode( RF_OPMODE_TRANSMITTER ); +} + +int8_t SX1276::GetRssi( ModemType modem ) +{ + int8_t rssi = 0; + + switch( modem ) + { + case MODEM_FSK: + rssi = -( Read( REG_RSSIVALUE ) >> 1 ); + break; + case MODEM_LORA: + if( this->settings.Channel > RF_MID_BAND_THRESH ) + { + rssi = RSSI_OFFSET_HF + Read( REG_LR_RSSIVALUE ); + } + else + { + rssi = RSSI_OFFSET_LF + Read( REG_LR_RSSIVALUE ); + } + break; + default: + rssi = -1; + break; + } + return rssi; +} + +void SX1276::SetOpMode( uint8_t opMode ) +{ + if( opMode != previousOpMode ) + { + previousOpMode = opMode; + if( opMode == RF_OPMODE_SLEEP ) + { + SetAntSwLowPower( true ); + } + else + { + SetAntSwLowPower( false ); + if( opMode == RF_OPMODE_TRANSMITTER ) + { + SetAntSw( 1 ); + } + else + { + SetAntSw( 0 ); + } + } + Write( REG_OPMODE, ( Read( REG_OPMODE ) & RF_OPMODE_MASK ) | opMode ); + } +} + +void SX1276::SetModem( ModemType modem ) +{ + if( this->settings.Modem == modem ) + { + return; + } + + this->settings.Modem = modem; + switch( this->settings.Modem ) + { + default: + case MODEM_FSK: + SetOpMode( RF_OPMODE_SLEEP ); + Write( REG_OPMODE, ( Read( REG_OPMODE ) & RFLR_OPMODE_LONGRANGEMODE_MASK ) | RFLR_OPMODE_LONGRANGEMODE_OFF ); + + Write( REG_DIOMAPPING1, 0x00 ); + Write( REG_DIOMAPPING2, 0x30 ); // DIO5=ModeReady + break; + case MODEM_LORA: + SetOpMode( RF_OPMODE_SLEEP ); + Write( REG_OPMODE, ( Read( REG_OPMODE ) & RFLR_OPMODE_LONGRANGEMODE_MASK ) | RFLR_OPMODE_LONGRANGEMODE_ON ); + + Write( REG_DIOMAPPING1, 0x00 ); + Write( REG_DIOMAPPING2, 0x00 ); + break; + } +} + +void SX1276::OnTimeoutIrq( void ) +{ + RadioState state = IDLE; + + switch( this->settings.State ) + { + case RX: + if( this->settings.Modem == MODEM_FSK ) + { + this->settings.FskPacketHandler.PreambleDetected = false; + this->settings.FskPacketHandler.SyncWordDetected = false; + this->settings.FskPacketHandler.NbBytes = 0; + this->settings.FskPacketHandler.Size = 0; + + // Clear Irqs + Write( REG_IRQFLAGS1, RF_IRQFLAGS1_RSSI | + RF_IRQFLAGS1_PREAMBLEDETECT | + RF_IRQFLAGS1_SYNCADDRESSMATCH ); + Write( REG_IRQFLAGS2, RF_IRQFLAGS2_FIFOOVERRUN ); + + if( this->settings.Fsk.RxContinuous == true ) + { + state = this->settings.State; + // Continuous mode restart Rx chain + Write( REG_RXCONFIG, Read( REG_RXCONFIG ) | RF_RXCONFIG_RESTARTRXWITHOUTPLLLOCK ); + } + else + { + rxTimeoutSyncWord.attach_us( this, &SX1276::OnTimeoutIrq, ( 8.0 * ( this->settings.Fsk.PreambleLen + + ( ( Read( REG_SYNCCONFIG ) & + ~RF_SYNCCONFIG_SYNCSIZE_MASK ) + + 1.0 ) + 1.0 ) / + ( double )this->settings.Fsk.Datarate ) * 1e6 ) ; + } + } + if( ( rxTimeout != NULL ) ) + { + rxTimeout( ); + } + break; + case TX: + if( ( txTimeout != NULL ) ) + { + txTimeout( ); + } + break; + default: + break; + } + this->settings.State = state; +} + +void SX1276::OnDio0Irq( void ) +{ + __IO uint8_t irqFlags = 0; + + switch( this->settings.State ) + { + case RX: + //TimerStop( &RxTimeoutTimer ); + // RxDone interrupt + switch( this->settings.Modem ) + { + case MODEM_FSK: + irqFlags = Read( REG_IRQFLAGS2 ); + if( ( irqFlags & RF_IRQFLAGS2_CRCOK ) != RF_IRQFLAGS2_CRCOK ) + { + // Clear Irqs + Write( REG_IRQFLAGS1, RF_IRQFLAGS1_RSSI | + RF_IRQFLAGS1_PREAMBLEDETECT | + RF_IRQFLAGS1_SYNCADDRESSMATCH ); + Write( REG_IRQFLAGS2, RF_IRQFLAGS2_FIFOOVERRUN ); + + if( this->settings.Fsk.RxContinuous == false ) + { + this->settings.State = IDLE; + rxTimeoutSyncWord.attach_us( this, &SX1276::OnTimeoutIrq, ( 8.0 * ( this->settings.Fsk.PreambleLen + + ( ( Read( REG_SYNCCONFIG ) & + ~RF_SYNCCONFIG_SYNCSIZE_MASK ) + + 1.0 ) + 1.0 ) / + ( double )this->settings.Fsk.Datarate ) * 1e6 ) ; + } + else + { + // Continuous mode restart Rx chain + Write( REG_RXCONFIG, Read( REG_RXCONFIG ) | RF_RXCONFIG_RESTARTRXWITHOUTPLLLOCK ); + } + rxTimeoutTimer.detach( ); + + if( ( rxError != NULL ) ) + { + rxError( ); + } + this->settings.FskPacketHandler.PreambleDetected = false; + this->settings.FskPacketHandler.SyncWordDetected = false; + this->settings.FskPacketHandler.NbBytes = 0; + this->settings.FskPacketHandler.Size = 0; + break; + } + + // Read received packet size + if( ( this->settings.FskPacketHandler.Size == 0 ) && ( this->settings.FskPacketHandler.NbBytes == 0 ) ) + { + if( this->settings.Fsk.FixLen == false ) + { + ReadFifo( ( uint8_t* )&this->settings.FskPacketHandler.Size, 1 ); + } + else + { + this->settings.FskPacketHandler.Size = Read( REG_PAYLOADLENGTH ); + } + ReadFifo( rxBuffer + this->settings.FskPacketHandler.NbBytes, this->settings.FskPacketHandler.Size - this->settings.FskPacketHandler.NbBytes ); + this->settings.FskPacketHandler.NbBytes += ( this->settings.FskPacketHandler.Size - this->settings.FskPacketHandler.NbBytes ); + } + else + { + ReadFifo( rxBuffer + this->settings.FskPacketHandler.NbBytes, this->settings.FskPacketHandler.Size - this->settings.FskPacketHandler.NbBytes ); + this->settings.FskPacketHandler.NbBytes += ( this->settings.FskPacketHandler.Size - this->settings.FskPacketHandler.NbBytes ); + } + + if( this->settings.Fsk.RxContinuous == false ) + { + this->settings.State = IDLE; + rxTimeoutSyncWord.attach_us( this, &SX1276::OnTimeoutIrq, ( 8.0 * ( this->settings.Fsk.PreambleLen + + ( ( Read( REG_SYNCCONFIG ) & + ~RF_SYNCCONFIG_SYNCSIZE_MASK ) + + 1.0 ) + 1.0 ) / + ( double )this->settings.Fsk.Datarate ) * 1e6 ) ; + } + else + { + // Continuous mode restart Rx chain + Write( REG_RXCONFIG, Read( REG_RXCONFIG ) | RF_RXCONFIG_RESTARTRXWITHOUTPLLLOCK ); + } + rxTimeoutTimer.detach( ); + + if( (rxDone != NULL ) ) + { + rxDone( rxBuffer, this->settings.FskPacketHandler.Size, this->settings.FskPacketHandler.RssiValue, 0 ); + } + this->settings.FskPacketHandler.PreambleDetected = false; + this->settings.FskPacketHandler.SyncWordDetected = false; + this->settings.FskPacketHandler.NbBytes = 0; + this->settings.FskPacketHandler.Size = 0; + break; + case MODEM_LORA: + { + uint8_t snr = 0; + + // Clear Irq + Write( REG_LR_IRQFLAGS, RFLR_IRQFLAGS_RXDONE ); + + irqFlags = Read( REG_LR_IRQFLAGS ); + if( ( irqFlags & RFLR_IRQFLAGS_PAYLOADCRCERROR_MASK ) == RFLR_IRQFLAGS_PAYLOADCRCERROR ) + { + // Clear Irq + Write( REG_LR_IRQFLAGS, RFLR_IRQFLAGS_PAYLOADCRCERROR ); + + if( this->settings.LoRa.RxContinuous == false ) + { + this->settings.State = IDLE; + } + rxTimeoutTimer.detach( ); + + if( (rxError != NULL ) ) + { + rxError( ); + } + break; + } + + this->settings.LoRaPacketHandler.SnrValue = Read( REG_LR_PKTSNRVALUE ); + if( this->settings.LoRaPacketHandler.SnrValue & 0x80 ) // The SNR sign bit is 1 + { + // Invert and divide by 4 + snr = ( ( ~this->settings.LoRaPacketHandler.SnrValue + 1 ) & 0xFF ) >> 2; + snr = -snr; + } + else + { + // Divide by 4 + snr = ( this->settings.LoRaPacketHandler.SnrValue & 0xFF ) >> 2; + } + + int8_t rssi = Read( REG_LR_PKTRSSIVALUE ); + if( this->settings.LoRaPacketHandler.SnrValue < 0 ) + { + if( this->settings.Channel > RF_MID_BAND_THRESH ) + { + this->settings.LoRaPacketHandler.RssiValue = RSSI_OFFSET_HF + rssi + ( rssi >> 4 ) + + snr; + } + else + { + this->settings.LoRaPacketHandler.RssiValue = RSSI_OFFSET_LF + rssi + ( rssi >> 4 ) + + snr; + } + } + else + { + if( this->settings.Channel > RF_MID_BAND_THRESH ) + { + this->settings.LoRaPacketHandler.RssiValue = RSSI_OFFSET_HF + rssi + ( rssi >> 4 ); + } + else + { + this->settings.LoRaPacketHandler.RssiValue = RSSI_OFFSET_LF + rssi + ( rssi >> 4 ); + } + } + + this->settings.LoRaPacketHandler.Size = Read( REG_LR_RXNBBYTES ); + ReadFifo( rxBuffer, this->settings.LoRaPacketHandler.Size ); + + if( this->settings.LoRa.RxContinuous == false ) + { + this->settings.State = IDLE; + } + rxTimeoutTimer.detach( ); + + if( ( rxDone != NULL ) ) + { + rxDone( rxBuffer, this->settings.LoRaPacketHandler.Size, this->settings.LoRaPacketHandler.RssiValue, this->settings.LoRaPacketHandler.SnrValue ); + } + } + break; + default: + break; + } + break; + case TX: + txTimeoutTimer.detach( ); + // TxDone interrupt + switch( this->settings.Modem ) + { + case MODEM_LORA: + // Clear Irq + Write( REG_LR_IRQFLAGS, RFLR_IRQFLAGS_TXDONE ); + // Intentional fall through + case MODEM_FSK: + default: + this->settings.State = IDLE; + if( ( txDone != NULL ) ) + { + txDone( ); + } + break; + } + break; + default: + break; + } +} + +void SX1276::OnDio1Irq( void ) +{ + switch( this->settings.State ) + { + case RX: + switch( this->settings.Modem ) + { + case MODEM_FSK: + // FifoLevel interrupt + // Read received packet size + if( ( this->settings.FskPacketHandler.Size == 0 ) && ( this->settings.FskPacketHandler.NbBytes == 0 ) ) + { + if( this->settings.Fsk.FixLen == false ) + { + ReadFifo( ( uint8_t* )&this->settings.FskPacketHandler.Size, 1 ); + } + else + { + this->settings.FskPacketHandler.Size = Read( REG_PAYLOADLENGTH ); + } + } + + if( ( this->settings.FskPacketHandler.Size - this->settings.FskPacketHandler.NbBytes ) > this->settings.FskPacketHandler.FifoThresh ) + { + ReadFifo( ( rxBuffer + this->settings.FskPacketHandler.NbBytes ), this->settings.FskPacketHandler.FifoThresh ); + this->settings.FskPacketHandler.NbBytes += this->settings.FskPacketHandler.FifoThresh; + } + else + { + ReadFifo( ( rxBuffer + this->settings.FskPacketHandler.NbBytes ), this->settings.FskPacketHandler.Size - this->settings.FskPacketHandler.NbBytes ); + this->settings.FskPacketHandler.NbBytes += ( this->settings.FskPacketHandler.Size - this->settings.FskPacketHandler.NbBytes ); + } + break; + case MODEM_LORA: + // Sync time out + rxTimeoutTimer.detach( ); + this->settings.State = IDLE; + if( ( rxTimeout != NULL ) ) + { + rxTimeout( ); + } + break; + default: + break; + } + break; + case TX: + switch( this->settings.Modem ) + { + case MODEM_FSK: + // FifoLevel interrupt + if( ( this->settings.FskPacketHandler.Size - this->settings.FskPacketHandler.NbBytes ) > this->settings.FskPacketHandler.ChunkSize ) + { + WriteFifo( ( rxBuffer + this->settings.FskPacketHandler.NbBytes ), this->settings.FskPacketHandler.ChunkSize ); + this->settings.FskPacketHandler.NbBytes += this->settings.FskPacketHandler.ChunkSize; + } + else + { + // Write the last chunk of data + WriteFifo( rxBuffer + this->settings.FskPacketHandler.NbBytes, this->settings.FskPacketHandler.Size - this->settings.FskPacketHandler.NbBytes ); + this->settings.FskPacketHandler.NbBytes += this->settings.FskPacketHandler.Size - this->settings.FskPacketHandler.NbBytes; + } + break; + case MODEM_LORA: + break; + default: + break; + } + break; + default: + break; + } +} + +void SX1276::OnDio2Irq( void ) +{ + switch( this->settings.State ) + { + case RX: + switch( this->settings.Modem ) + { + case MODEM_FSK: + if( ( this->settings.FskPacketHandler.PreambleDetected == true ) && ( this->settings.FskPacketHandler.SyncWordDetected == false ) ) + { + rxTimeoutSyncWord.detach( ); + + this->settings.FskPacketHandler.SyncWordDetected = true; + + this->settings.FskPacketHandler.RssiValue = -( Read( REG_RSSIVALUE ) >> 1 ); + + this->settings.FskPacketHandler.AfcValue = ( int32_t )( double )( ( ( uint16_t )Read( REG_AFCMSB ) << 8 ) | + ( uint16_t )Read( REG_AFCLSB ) ) * + ( double )FREQ_STEP; + this->settings.FskPacketHandler.RxGain = ( Read( REG_LNA ) >> 5 ) & 0x07; + } + break; + case MODEM_LORA: + break; + default: + break; + } + break; + case TX: + switch( this->settings.Modem ) + { + case MODEM_FSK: + break; + case MODEM_LORA: + break; + default: + break; + } + break; + default: + break; + } +} + +void SX1276::OnDio3Irq( void ) +{ + switch( this->settings.Modem ) + { + case MODEM_FSK: + break; + case MODEM_LORA: + break; + default: + break; + } +} + +void SX1276::OnDio4Irq( void ) +{ + switch( this->settings.Modem ) + { + case MODEM_FSK: + { + if( this->settings.FskPacketHandler.PreambleDetected == false ) + { + this->settings.FskPacketHandler.PreambleDetected = true; + } + } + break; + case MODEM_LORA: + break; + default: + break; + } +} + +void SX1276::OnDio5Irq( void ) +{ + switch( this->settings.Modem ) + { + case MODEM_FSK: + break; + case MODEM_LORA: + break; + default: + break; + } +} \ No newline at end of file