I made a fork of a generic library that was developed with support for RFM95 LoRa module that I found online. I Made a few changes and made it compatible with hardware limitations of the MAX32620FTHR and MAX32630FTHR module.
Dependents: MAX326xxFTHR_LoRa_RFM95 MAX326xxFTHR_LoRa_PingPong MAX326xxFTHR_RFM95_LoRa_PingPong MAX326xxFTHR_LoRa_RFM95_PingPong_Example ... more
Fork of SX1276GenericLib by
LoRa_TODO.txt@67:d3afd803f40d, 2017-07-16 (annotated)
- Committer:
- Helmut Tschemernjak
- Date:
- Sun Jul 16 21:25:00 2017 +0200
- Revision:
- 67:d3afd803f40d
- Parent:
- 65:b2d98328fcba
- Child:
- 71:7067e67902a8
added mbed alike Timeout support for Arduino D21.
Who changed what in which revision?
User | Revision | Line number | New contents of line |
---|---|---|---|
Helmut Tschemernjak | 65:b2d98328fcba | 1 | |
Helmut Tschemernjak | 39:706c32eda7e7 | 2 | Move finished tasks to Done section: |
Helmut Tschemernjak | 46:e78a1d0391ac | 3 | |
Helmut Tschemernjak | 65:b2d98328fcba | 4 | TODOs: |
Helmut Tschemernjak | 65:b2d98328fcba | 5 | - add support for Arduino - add sx1276-Arduino-hal.h/cpp |
Helmut Tschemernjak | 65:b2d98328fcba | 6 | - add support for Linux - add sx1276-Linux-hal.h/cpp |
Helmut Tschemernjak | 39:706c32eda7e7 | 7 | - Add support to provide the send/receive packet buffer, |
Helmut Tschemernjak | 39:706c32eda7e7 | 8 | no need to allocate packet data in the sx1276 driver. Can be provided |
Helmut Tschemernjak | 46:e78a1d0391ac | 9 | Rx/Tx parameters, this avoids double memory usage |
Helmut Tschemernjak | 39:706c32eda7e7 | 10 | - Add support for larger Lora packets (can be up to 2048 bytes) |
Helmut Tschemernjak | 39:706c32eda7e7 | 11 | this feature is not so important, however the current implementation |
Helmut Tschemernjak | 42:72deced1a4c4 | 12 | is very basic. |
Helmut Tschemernjak | 42:72deced1a4c4 | 13 | - It is a little bit strange that RX/TX/Cad Timeout Timer calling the |
Helmut Tschemernjak | 42:72deced1a4c4 | 14 | some handler OnTimeoutIrq. Maybe we just need a single timer, or |
Helmut Tschemernjak | 46:e78a1d0391ac | 15 | it is a good idea to split the OnTimeoutIrq function into separate |
Helmut Tschemernjak | 65:b2d98328fcba | 16 | callbacks for RX/TX/Cad timeouts |
Helmut Tschemernjak | 46:e78a1d0391ac | 17 | - Test if the SX1276 timeouts. Does rx/tx/sync really uses three different |
Helmut Tschemernjak | 51:aef3234bcb71 | 18 | timers or just one at a time. |
Helmut Tschemernjak | 65:b2d98328fcba | 19 | - Add API to set the LNA gain |
Helmut Tschemernjak | 65:b2d98328fcba | 20 | |
Helmut Tschemernjak | 39:706c32eda7e7 | 21 | |
Helmut Tschemernjak | 65:b2d98328fcba | 22 | |
Helmut Tschemernjak | 65:b2d98328fcba | 23 | Done: |
Helmut Tschemernjak | 39:706c32eda7e7 | 24 | - Started a Generic SX1276 driver to support all SX1276 modules (May-2017 Helmut) |
Helmut Tschemernjak | 65:b2d98328fcba | 25 | - Migrated typedefs code into sx1276.h (7-May-2017 Helmut) |
Helmut Tschemernjak | 65:b2d98328fcba | 26 | - Migrated enum code into sx1276.h/radio.h (7-May-2017 Helmut) |
Helmut Tschemernjak | 65:b2d98328fcba | 27 | - Verify the Murata ANT Switch code |
Helmut Tschemernjak | 65:b2d98328fcba | 28 | - MURATA PA_BOOST case,is _antSwitchTXBoost right? (Same as STM sample code) |
Helmut Tschemernjak | 46:e78a1d0391ac | 29 | - Check of the MURATA TCXO config is correct (implemented, check JP9 on STM L0 board) |
Helmut Tschemernjak | 65:b2d98328fcba | 30 | - Make the timers more generic and move the OS code into the HAL layer. (May 2017 Helmut) |
Helmut Tschemernjak | 50:43f7160e869c | 31 | - Removed pull down on dio=-dio5 for L151 &LPC11U6X which make no sense to me. May 2017 Helmut |
Helmut Tschemernjak | 65:b2d98328fcba | 32 | - Added radio API support to receive the MaxMTUSize (May 2017 Helmut) |
Helmut Tschemernjak | 50:43f7160e869c | 33 | - Added Send optional Send() parameter to include a header, |
Helmut Tschemernjak | 50:43f7160e869c | 34 | this saves additional buffers. (May 2017 Helmut) |
Helmut Tschemernjak | 51:aef3234bcb71 | 35 | - Added proper void * type from sending data, uint8_t * is not appropriate (May 2017 Helmut) |
Helmut Tschemernjak | 51:aef3234bcb71 | 36 | - Use also void pointer for FiFo Write/Read and regular SPI Read/Write |
Helmut Tschemernjak | 54:0d8ea87fbab9 | 37 | - Added return value to Init, we check for a radio availability (May 2017 Helmut) |
Helmut Tschemernjak | 54:0d8ea87fbab9 | 38 | - Added a RxSignalPending which verifies if we have a signal pending in receive state. (May 2017 Helmut) |
Helmut Tschemernjak | 55:00c1f5b83920 | 39 | - Added LoRa bandwidth mapping table, now the SetRx/Tx frequency is in Hz. (May 2017 Helmut) |
Helmut Tschemernjak | 60:75426c142f6e | 40 | - Enabled MURATA_SX1276 for the MURATA_SX1276 chip (May 2017 Helmut) |
Helmut Tschemernjak | 61:08b50780eb91 | 41 | - Made SetRfTxPower public to allow easily power TX changes (May 2017 Helmut) |
Helmut Tschemernjak | 63:5b9d391244dc | 42 | - Added userData and userThisPtr into the radio events, this allows to call C++ |
Helmut Tschemernjak | 63:5b9d391244dc | 43 | functions and in can include a context via the userData |
Helmut Tschemernjak | 65:b2d98328fcba | 44 | - Add support for Cad detection before sending a packet, already done in higher |
Helmut Tschemernjak | 65:b2d98328fcba | 45 | level protocols |
Helmut Tschemernjak | 65:b2d98328fcba | 46 | - Added initial Arduino support, needs more testing/completion. |
Helmut Tschemernjak | 54:0d8ea87fbab9 | 47 |