I made a fork of a generic library that was developed with support for RFM95 LoRa module that I found online. I Made a few changes and made it compatible with hardware limitations of the MAX32620FTHR and MAX32630FTHR module.
Dependents: MAX326xxFTHR_LoRa_RFM95 MAX326xxFTHR_LoRa_PingPong MAX326xxFTHR_RFM95_LoRa_PingPong MAX326xxFTHR_LoRa_RFM95_PingPong_Example ... more
Fork of SX1276GenericLib by
Diff: LoRa_TODO.txt
- Revision:
- 46:e78a1d0391ac
- Parent:
- 44:544add59b26d
- Child:
- 50:43f7160e869c
--- a/LoRa_TODO.txt Tue May 09 14:46:15 2017 +0000 +++ b/LoRa_TODO.txt Thu May 11 10:11:13 2017 +0200 @@ -1,22 +1,22 @@ -Tasks we needs to be done. Move finished tasks to Done section: - -- Make the timers more generic and move the OS code into the HAL layer. + +TODOs: - add support for Arduino - add sx1276-Arduino-hal.h/cpp - add support for Linux - add sx1276-Linux-hal.h/cpp - Add support for Cad detection before sending a packet - Add support to provide the send/receive packet buffer, no need to allocate packet data in the sx1276 driver. Can be provided - Rx/Tx parameters. + Rx/Tx parameters, this avoids double memory usage - Add support for larger Lora packets (can be up to 2048 bytes) this feature is not so important, however the current implementation is very basic. - It is a little bit strange that RX/TX/Cad Timeout Timer calling the some handler OnTimeoutIrq. Maybe we just need a single timer, or - it is a good idea to split the OnTimeoutIrq function -- Test if the SX1276 timeouts (rx(tx/sync really uses three timers or - just one at a time. + it is a good idea to split the OnTimeoutIrq function into separate + callbacks for RX/TX/Cad timeouts +- Test if the SX1276 timeouts. Does rx/tx/sync really uses three different + timers or just one at a time. Done: @@ -25,4 +25,6 @@ - Migrated enum code into sx1276.h/radio.h (7-May-2017 Helmut) - Verify the Murata ANT Switch code - MURATA PA_BOOST case,is _antSwitchTXBoost right? (Same as STM sample code) -- Check of the MURATA TCXO config is correct (implemented, check JP9 on STM L0 board) +- Check of the MURATA TCXO config is correct (implemented, check JP9 on STM L0 board) +- Make the timers more generic and move the OS code into the HAL layer. (May Helmut) +- Removed pull down on dio=-dio5 for L151 &LPC11U6X which make no sense to me. May 2017 Helmut