Devin Alexander / Mbed OS MAX326xxFTHR_RFM95_LoRa_PingPong

This program is guided to help establish a connection between two RFM95 900MHz LoRa radio modules using Maxim Integrated's Feather MCUs (MAX32630FTHR Mbed and the MAX32620FTHR Mbed). Once the radios are configured after powering on and if the radios are wired correctly, the two radios will self identify as either a master or a slave, and will then proceed to PING and PONG back and forth. Information about what is happening between the radios can be seen if the two boards are hooked up to a USB COM port through the included DAPLINK/MAX32625PICO modules.

Dependencies:   BufferedSerial SX1276GenericLib USBDeviceHT max32630fthr

Fork of MAX326xxFTHR_LoRa_PingPong by Devin Alexander

Diff: main.cpp

Revision:
19:9f035b9e65ec
Parent:
18:d5527ce82e6b
--- a/main.cpp	Mon Mar 12 15:00:02 2018 +0000
+++ b/main.cpp	Fri Jun 01 22:07:08 2018 +0000
@@ -5,6 +5,10 @@
  */
  #include "main.h"
 
+ #if defined(TARGET_MAX32630FTHR) // using the RFM95 board
+   #include "max32630fthr.h"
+    MAX32630FTHR pegasus(MAX32630FTHR::VIO_3V3);
+ #endif
 
 DigitalOut myled(LED);
 
@@ -14,6 +18,8 @@
     DigitalOut vext(POWER_VEXT);
     vext = POWER_VEXT_ON;
 #endif    
+
+
     /*
      * inits the Serial or USBSerial when available (230400 baud).
      * If the serial uart is not is not connected it swiches to USB Serial