Devin Alexander / Mbed OS MAX326xxFTHR_LoRa_RFM95_PingPong_Example

This program is guided to help establish a connection between two RFM95 900MHz LoRa radio modules using Maxim Integrated's Feather MCUs (MAX32630FTHR Mbed and the MAX32620FTHR Mbed). Once the radios are configured after powering on and if the radios are wired correctly, the two radios will self identify as either a master or a slave, and will then proceed to PING and PONG back and forth. Information about what is happening between the radios can be seen if the two boards are hooked up to a USB COM port through the included DAPLINK/MAX32625PICO modules.

Dependencies:   BufferedSerial SX1276GenericLib USBDeviceHT max32630fthr

Fork of MAX326xxFTHR_LoRa_PingPong by Devin Alexander

Diff: SX1276GenericPingPong/GenericPingPong.cpp

Revision:
3:dc560d3e9070
Parent:
1:65d602e2d746
Child:
6:1b598b0e52e4
diff -r 772fb0dbccef -r dc560d3e9070 SX1276GenericPingPong/GenericPingPong.cpp
--- a/SX1276GenericPingPong/GenericPingPong.cpp	Thu May 11 08:21:42 2017 +0000
+++ b/SX1276GenericPingPong/GenericPingPong.cpp	Sun May 14 14:33:29 2017 +0000
@@ -374,7 +374,7 @@
     }
 }
 
-void OnTxDone( void )
+void OnTxDone(void *radio)
 {
     Radio->Sleep( );
     State = TX;
@@ -382,7 +382,7 @@
         dprintf("> OnTxDone");
 }
 
-void OnRxDone( uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr)
+void OnRxDone(void *radio, uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr)
 {
     Radio->Sleep( );
     BufferSize = size;
@@ -393,7 +393,7 @@
     dump("Data:", payload, size);
 }
 
-void OnTxTimeout( void )
+void OnTxTimeout(void *radio)
 {
     *led3 = 0;
     Radio->Sleep( );
@@ -402,7 +402,7 @@
         dprintf("> OnTxTimeout");
 }
 
-void OnRxTimeout( void )
+void OnRxTimeout(void *radio)
 {
     *led3 = 0;
     Radio->Sleep( );
@@ -412,7 +412,7 @@
         dprintf("> OnRxTimeout");
 }
 
-void OnRxError( void )
+void OnRxError(void *radio)
 {
     Radio->Sleep( );
     State = RX_ERROR;