![](/media/cache/profiles/profile_pic_for_github_less_than_1MB.jpg.50x50_q85.jpg)
This program is guided to help establish a connection between two RFM95 900MHz LoRa radio modules using Maxim Integrated's Feather MCUs (MAX32630FTHR Mbed and the MAX32620FTHR Mbed). Once the radios are configured after powering on and if the radios are wired correctly, the two radios will self identify as either a master or a slave, and will then proceed to PING and PONG back and forth. Information about what is happening between the radios can be seen if the two boards are hooked up to a USB COM port through the included DAPLINK/MAX32625PICO modules.
Dependencies: BufferedSerial SX1276GenericLib USBDeviceHT max32630fthr
Fork of MAX326xxFTHR_LoRa_PingPong by
Diff: SX1276GenericPingPong/GenericPingPong.cpp
- Revision:
- 11:d3a591c20cd7
- Parent:
- 8:3b0d7b4ff28f
- Child:
- 13:5a32a1922fbc
--- a/SX1276GenericPingPong/GenericPingPong.cpp Fri Jun 23 11:46:59 2017 +0000 +++ b/SX1276GenericPingPong/GenericPingPong.cpp Thu Jun 29 17:44:18 2017 +0000 @@ -365,7 +365,7 @@ } } -void OnTxDone(void *radio) +void OnTxDone(void *radio, void *userThisPtr, void *userData) { Radio->Sleep( ); State = TX; @@ -373,7 +373,7 @@ dprintf("> OnTxDone"); } -void OnRxDone(void *radio, uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr) +void OnRxDone(void *radio, void *userThisPtr, void *userData, uint8_t *payload, uint16_t size, int16_t rssi, int8_t snr) { Radio->Sleep( ); BufferSize = size; @@ -384,7 +384,7 @@ dump("Data:", payload, size); } -void OnTxTimeout(void *radio) +void OnTxTimeout(void *radio, void *userThisPtr, void *userData) { *led3 = 0; Radio->Sleep( ); @@ -393,7 +393,7 @@ dprintf("> OnTxTimeout"); } -void OnRxTimeout(void *radio) +void OnRxTimeout(void *radio, void *userThisPtr, void *userData) { *led3 = 0; Radio->Sleep( ); @@ -403,7 +403,7 @@ dprintf("> OnRxTimeout"); } -void OnRxError(void *radio) +void OnRxError(void *radio, void *userThisPtr, void *userData) { Radio->Sleep( ); State = RX_ERROR;