![](/media/cache/profiles/profile_pic_for_github_less_than_1MB.jpg.50x50_q85.jpg)
got this sample program for 2+ sx1276 modules to communicate in a ping pong fashion. This program has been tested and verified to run with 915MHz Hope RFM95 modules running with MAX32620FTHR and MAX32630FTHR micro controllers.
Dependencies: BMI160 BufferedSerial SX1276GenericLib USBDeviceHT max32630fthr
Fork of STM32L0_LoRa by
PinMap.h
- Committer:
- Helmut64
- Date:
- 2018-02-23
- Revision:
- 17:98f2528e8399
- Parent:
- 16:675f4d0ee9e9
- Child:
- 18:d5527ce82e6b
File content as of revision 17:98f2528e8399:
/* * Copyright (c) 2018 Helmut Tschemernjak * 30826 Garbsen (Hannover) Germany * Licensed under the Apache License, Version 2.0); */ #ifdef TARGET_NUCLEO_L476RG #define FEATURE_LORA #elif TARGET_DISCO_L072CZ_LRWAN1 #define FEATURE_LORA #elif TARGET_STM32L432KC #define HELTEC_STM32L4 #define FEATURE_LORA #define FEATURE_USBSERIAL #endif #if defined(TARGET_DISCO_L072CZ_LRWAN1) #define LED LED2 #define LORA_SPI_MOSI PA_7 #define LORA_SPI_MISO PA_6 #define LORA_SPI_SCLK PB_3 #define LORA_CS PA_15 #define LORA_RESET PC_0 #define LORA_DIO0 PB_4 #define LORA_DIO1 PB_1 #define LORA_DIO2 PB_0 #define LORA_DIO3 PC_13 #define LORA_DIO4 PA_5 #define LORA_DIO5 PA_4 #define LORA_ANT_RX PA_1 #define LORA_ANT_TX PC_2 #define LORA_ANT_BOOST PC_1 #define LORA_TCXO PA_12 // 32 MHz #elif defined(TARGET_NUCLEO_L476RG) // using the RFM95 board #define LORA_SPI_MOSI PC_12 #define LORA_SPI_MISO PC_11 #define LORA_SPI_SCLK PC_10 #define LORA_CS PA_0 #define LORA_RESET PA_1 #define LORA_DIO0 PD_2 // DIO0=TxDone/RXDone #define LORA_DIO1 PB_7 // #define LORA_DIO2 PC_14 // DIO2=FhssChangeChannel #define LORA_DIO3 PC_15 // DIO3=CADDone #define LORA_DIO4 PH_0 // ???? #define LORA_DIO5 NC // unused? #elif defined (HELTEC_STM32L4) #define USER_BUTTON PH_3 // boot pin #define LED PB_0 // red #define LED2 PB_1 // green #define POWER_VEXT PA_3 #define POWER_VEXT_ON 0 #define POWER_VEXT_OFF 1 #define LORA_SPI_MOSI PA_7 #define LORA_SPI_MISO PA_6 #define LORA_SPI_SCLK PB_5 #define LORA_CS PA_4 #define LORA_RESET PA_1 #define LORA_DIO0 PA_0 // DIO0=TxDone/RXDone/CADDone #define LORA_DIO1 NC // #define LORA_DIO2 NC // #define LORA_DIO3 NC // #define LORA_DIO4 NC // #define LORA_DIO5 NC // #elif defined(TARGET_NUCLEO_L432KC) // using the RFM95 board // #define LED PB_3 // green #define LED PB_5 // green #define LORA_SPI_MOSI PA_7 #define LORA_SPI_MISO PA_6 #define LORA_SPI_SCLK PB_5 #define LORA_CS PA_4 #define LORA_RESET PA_1 #define LORA_DIO0 PA_0 // DIO0=TxDone/RXDone/CADDone #define LORA_DIO1 NC // #define LORA_DIO2 NC // #define LORA_DIO3 NC // #define LORA_DIO4 NC // #define LORA_DIO5 NC // #else #error "unknown board" #endif