Devin Alexander / Mbed OS MAX326xxFTHR_LoRa_PingPongExample

This program is guided to help establish a connection between two RFM95 900MHz LoRa radio modules using Maxim Integrated's Feather MCUs (MAX32630FTHR Mbed and the MAX32620FTHR Mbed). Once the radios are configured after powering on and if the radios are wired correctly, the two radios will self identify as either a master or a slave, and will then proceed to PING and PONG back and forth. Information about what is happening between the radios can be seen if the two boards are hooked up to a USB COM port through the included DAPLINK/MAX32625PICO modules.

Dependencies:   BufferedSerial SX1276GenericLib USBDeviceHT max32630fthr

Fork of MAX326xxFTHR_LoRa_PingPong by Devin Alexander

Diff: PinMap.h

Revision:
18:d5527ce82e6b
Parent:
17:98f2528e8399
Child:
19:9f035b9e65ec
--- a/PinMap.h	Fri Feb 23 12:57:25 2018 +0000
+++ b/PinMap.h	Mon Mar 12 15:00:02 2018 +0000
@@ -60,6 +60,7 @@
 #define USER_BUTTON     PH_3    // boot pin
 #define LED             PB_0    // red
 #define LED2            PB_1    // green
+#define LED1            LED
 
 #define POWER_VEXT      PA_3
 #define POWER_VEXT_ON   0
@@ -68,7 +69,7 @@
 
 #define LORA_SPI_MOSI   PA_7
 #define LORA_SPI_MISO   PA_6
-#define LORA_SPI_SCLK   PB_5
+#define LORA_SPI_SCLK   PA_5
 #define LORA_CS         PA_4
 #define LORA_RESET      PA_1
 #define LORA_DIO0       PA_0    // DIO0=TxDone/RXDone/CADDone