Essai d'application Lycée Malraux NSI
Dependencies: BLE_API nRF51822 mbed-dev-bin
Diff: source/drivers/MicroBitButton.cpp
- Revision:
- 1:8aa5cdb4ab67
diff -r fb15f7887843 -r 8aa5cdb4ab67 source/drivers/MicroBitButton.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/source/drivers/MicroBitButton.cpp Thu Apr 07 01:33:22 2016 +0100 @@ -0,0 +1,162 @@ +/* +The MIT License (MIT) + +Copyright (c) 2016 British Broadcasting Corporation. +This software is provided by Lancaster University by arrangement with the BBC. + +Permission is hereby granted, free of charge, to any person obtaining a +copy of this software and associated documentation files (the "Software"), +to deal in the Software without restriction, including without limitation +the rights to use, copy, modify, merge, publish, distribute, sublicense, +and/or sell copies of the Software, and to permit persons to whom the +Software is furnished to do so, subject to the following conditions: + +The above copyright notice and this permission notice shall be included in +all copies or substantial portions of the Software. + +THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR +IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, +FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL +THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER +LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING +FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER +DEALINGS IN THE SOFTWARE. +*/ + +#include "MicroBitConfig.h" +#include "MicroBitButton.h" +#include "MicroBitSystemTimer.h" + +/** + * Constructor. + * + * Create a software representation of a button. + * + * @param name the physical pin on the processor that should be used as input. + * + * @param id the ID of the new MicroBitButton object. + * + * @param eventConfiguration Configures the events that will be generated by this MicroBitButton instance. + * Defaults to MICROBIT_BUTTON_ALL_EVENTS. + * + * @param mode the configuration of internal pullups/pulldowns, as defined in the mbed PinMode class. PullNone by default. + * + * @code + * buttonA(MICROBIT_PIN_BUTTON_A, MICROBIT_ID_BUTTON_A); + * @endcode + */ +MicroBitButton::MicroBitButton(PinName name, uint16_t id, MicroBitButtonEventConfiguration eventConfiguration, PinMode mode) : pin(name, mode) +{ + this->id = id; + this->name = name; + this->eventConfiguration = eventConfiguration; + this->downStartTime = 0; + this->sigma = 0; + system_timer_add_component(this); +} + +/** + * Changes the event configuration used by this button to the given MicroBitButtonEventConfiguration. + * + * All subsequent events generated by this button will then be informed by this configuraiton. + * + * @param config The new configuration for this button. Legal values are MICROBIT_BUTTON_ALL_EVENTS or MICROBIT_BUTTON_SIMPLE_EVENTS. + * + * Example: + * @code + * // Configure a button to generate all possible events. + * buttonA.setEventConfiguration(MICROBIT_BUTTON_ALL_EVENTS); + * + * // Configure a button to suppress MICROBIT_BUTTON_EVT_CLICK and MICROBIT_BUTTON_EVT_LONG_CLICK events. + * buttonA.setEventConfiguration(MICROBIT_BUTTON_SIMPLE_EVENTS); + * @endcode + */ +void MicroBitButton::setEventConfiguration(MicroBitButtonEventConfiguration config) +{ + this->eventConfiguration = config; +} + +/** + * periodic callback from MicroBit system timer. + * + * Check for state change for this button, and fires various events on a state change. + */ +void MicroBitButton::systemTick() +{ + // + // If the pin is pulled low (touched), increment our culumative counter. + // otherwise, decrement it. We're essentially building a lazy follower here. + // This makes the output debounced for buttons, and desensitizes touch sensors + // (particularly in environments where there is mains noise!) + // + if(!pin) + { + if (sigma < MICROBIT_BUTTON_SIGMA_MAX) + sigma++; + } + else + { + if (sigma > MICROBIT_BUTTON_SIGMA_MIN) + sigma--; + } + + // Check to see if we have off->on state change. + if(sigma > MICROBIT_BUTTON_SIGMA_THRESH_HI && !(status & MICROBIT_BUTTON_STATE)) + { + // Record we have a state change, and raise an event. + status |= MICROBIT_BUTTON_STATE; + MicroBitEvent evt(id,MICROBIT_BUTTON_EVT_DOWN); + + //Record the time the button was pressed. + downStartTime = system_timer_current_time(); + } + + // Check to see if we have on->off state change. + if(sigma < MICROBIT_BUTTON_SIGMA_THRESH_LO && (status & MICROBIT_BUTTON_STATE)) + { + status = 0; + MicroBitEvent evt(id,MICROBIT_BUTTON_EVT_UP); + + if (eventConfiguration == MICROBIT_BUTTON_ALL_EVENTS) + { + //determine if this is a long click or a normal click and send event + if((system_timer_current_time() - downStartTime) >= MICROBIT_BUTTON_LONG_CLICK_TIME) + MicroBitEvent evt(id,MICROBIT_BUTTON_EVT_LONG_CLICK); + else + MicroBitEvent evt(id,MICROBIT_BUTTON_EVT_CLICK); + } + } + + //if button is pressed and the hold triggered event state is not triggered AND we are greater than the button debounce value + if((status & MICROBIT_BUTTON_STATE) && !(status & MICROBIT_BUTTON_STATE_HOLD_TRIGGERED) && (system_timer_current_time() - downStartTime) >= MICROBIT_BUTTON_HOLD_TIME) + { + //set the hold triggered event flag + status |= MICROBIT_BUTTON_STATE_HOLD_TRIGGERED; + + //fire hold event + MicroBitEvent evt(id,MICROBIT_BUTTON_EVT_HOLD); + } +} + +/** + * Tests if this Button is currently pressed. + * + * @code + * if(buttonA.isPressed()) + * display.scroll("Pressed!"); + * @endcode + * + * @return 1 if this button is pressed, 0 otherwise. + */ +int MicroBitButton::isPressed() +{ + return status & MICROBIT_BUTTON_STATE ? 1 : 0; +} + +/** + * Destructor for MicroBitButton, where we deregister this instance from the array of fiber components. + */ +MicroBitButton::~MicroBitButton() +{ + system_timer_remove_component(this); +}