Proyecto emprendetronika
Dependencies: freetronicsLCDShield mbed
Fork of prototipo by
Diff: main.cpp
- Revision:
- 1:5372d7ce92ff
- Parent:
- 0:c7f387fc3773
- Child:
- 2:196bf6ff7eff
diff -r c7f387fc3773 -r 5372d7ce92ff main.cpp --- a/main.cpp Tue May 27 22:12:23 2014 +0000 +++ b/main.cpp Wed May 28 18:35:42 2014 +0000 @@ -10,22 +10,153 @@ DigitalIn switch2(PTB9); DigitalIn switch3(PTB10); DigitalIn switch4(PTB11); +DigitalIn start(PTE2); AnalogIn pot1(PTB0); AnalogIn pot2(PTB1); AnalogIn pot3(PTB2); AnalogIn pot4(PTB3); -Timer t; +Timer t1; +Timer t2; +Timer t3; +Timer t4; -float tiempo; - +float tiempo1, tiempo2, tiempo3, tiempo4; +int bandera, bandera1, bandera2, bandera3, bandera4; + +float pot11; +float pot22; +float pot33; +float pot44; + + int main() { - while(1){ - if(PTB8==1){ - - } - } - - /*lcd.printf("prototipo SR1"); + + while(1){ + + if(start==0){ + bandera=1; + valvula1=0; + valvula2=0; + valvula3=0; + valvula4=0; + + lcd.setCursorPosition(0, 0); + if(switch1==1){ + lcd.printf("ON "); + lcd.setCursorPosition(1, 0); + pot11=pot1.read(); + lcd.printf("%0.1f",pot11); + + } + else { + lcd.printf("OFF"); + lcd.setCursorPosition(1, 0); + lcd.printf("0.0 "); + + } + + lcd.setCursorPosition(0, 4); + if(switch2==1){ + lcd.printf("ON "); + lcd.setCursorPosition(1, 4); + pot22=pot2.read(); + lcd.printf("%0.1f",pot22); + } + else { + lcd.printf("OFF"); + lcd.setCursorPosition(1, 4); + lcd.printf("0.0 "); + } + + lcd.setCursorPosition(0, 8); + if(switch3==1){ + lcd.printf("ON "); + lcd.setCursorPosition(1, 8); + pot33=pot3.read(); + lcd.printf("%0.1f",pot33); + } + else { + lcd.printf("OFF"); + lcd.setCursorPosition(1, 8); + lcd.printf("0.0 "); + } + + lcd.setCursorPosition(0, 12); + if(switch4==1){ + lcd.printf("ON "); + lcd.setCursorPosition(1, 12); + pot44=pot4.read(); + lcd.printf("%0.1f",pot44); + } + else { + lcd.printf("OFF"); + lcd.setCursorPosition(1, 12); + lcd.printf("0.0 "); + } + + }else{ + if(bandera==1){ + tiempo1=pot11*60; + tiempo2=pot22*60; + tiempo3=pot33*60; + tiempo4=pot44*60; + bandera1=switch1; + bandera2=switch2; + bandera3=switch3; + bandera4=switch4; + bandera=0; + } + if(bandera1==1){ + bandera1=0; + valvula1=1; + t1.start(); + } + if(t1>=tiempo1){ + t1.stop(); + t1.reset(); + valvula1=0; + } + + if(bandera2==1){ + bandera2=0; + valvula2=1; + t2.start(); + } + if(t2>=tiempo2){ + t2.stop(); + t2.reset(); + valvula2=0; + } + + if(bandera3==1){ + bandera3=0; + valvula3=1; + t3.start(); + } + if(t3>=tiempo3){ + t3.stop(); + t3.reset(); + valvula3=0; + } + + if(bandera4==1){ + bandera4=0; + valvula4=1; + t4.start(); + } + if(t4>=tiempo4){ + t4.stop(); + t4.reset(); + valvula4=0; + } + + } + + } + } + + + /*lcd.printf("prototipo SR1"); wait(3); t.start(); lcd.setCursorPosition(1, 0); @@ -59,5 +190,4 @@ }else if(t>=24){ t.reset(); } - }*/ -} \ No newline at end of file + }*/ \ No newline at end of file