File content as of revision 4:7621103c5a40:

/*
 * FreeModbus Libary: A portable Modbus implementation for Modbus ASCII/RTU.
 * Copyright (c) 2006 Christian Walter <wolti@sil.at>
 * All rights reserved.
 *
 * Redistribution and use in source and binary forms, with or without
 * modification, are permitted provided that the following conditions
 * are met:
 * 1. Redistributions of source code must retain the above copyright
 *    notice, this list of conditions and the following disclaimer.
 * 2. Redistributions in binary form must reproduce the above copyright
 *    notice, this list of conditions and the following disclaimer in the
 *    documentation and/or other materials provided with the distribution.
 * 3. The name of the author may not be used to endorse or promote products
 *    derived from this software without specific prior written permission.
 *
 * THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR
 * IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES
 * OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.
 * IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
 * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
 * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,
 * DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY
 * THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
 * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
 * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
 *
 * File: $Id: mb.c,v 1.27 2007/02/18 23:45:41 wolti Exp $
 */

/* ----------------------- System includes ----------------------------------*/
#include "stdlib.h"
#include "string.h"

/* ----------------------- Platform includes --------------------------------*/
#include "port.h"

/* ----------------------- Modbus includes ----------------------------------*/
#include "mb.h"
#include "mbconfig.h"
#include "mbframe.h"
#include "mbproto.h"
#include "mbfunc.h"
#include "mbport.h"

#if MB_RTU_ENABLED == 1
#include "mbrtu.h"
#endif
#if MB_RTU_CUSTOM_ENABLED == 1
#include "mbrtucustom.h"
#endif
#if MB_ASCII_ENABLED == 1
#include "mbascii.h"
#endif
#if MB_TCP_ENABLED == 1
#include "mbtcp.h"
#endif

#ifndef MB_PORT_HAS_CLOSE
#define MB_PORT_HAS_CLOSE 0
#endif

/* ----------------------- Static variables ---------------------------------*/


static UCHAR    ucMBAddress;
static eMBMode  eMBCurrentMode;

static enum {
    STATE_ENABLED,
    STATE_DISABLED,
    STATE_NOT_INITIALIZED
} eMBState = STATE_NOT_INITIALIZED;

/* Functions pointer which are initialized in eMBInit( ). Depending on the
 * mode (RTU or ASCII) the are set to the correct implementations.
 */
static peMBFrameSend peMBFrameSendCur;
static pvMBFrameStart pvMBFrameStartCur;
static pvMBFrameStop pvMBFrameStopCur;
static peMBFrameReceive peMBFrameReceiveCur;
static pvMBFrameClose pvMBFrameCloseCur;

/* Callback functions required by the porting layer. They are called when
 * an external event has happend which includes a timeout or the reception
 * or transmission of a character.
 */
BOOL( *pxMBFrameCBByteReceived ) ( void );
BOOL( *pxMBFrameCBTransmitterEmpty ) ( void );
BOOL( *pxMBPortCBTimerExpired ) ( void );

BOOL( *pxMBFrameCBReceiveFSMCur ) ( void );
BOOL( *pxMBFrameCBTransmitFSMCur ) ( void );

/* An array of Modbus functions handlers which associates Modbus function
 * codes with implementing functions.
 */
static xMBFunctionHandler xFuncHandlers[MB_FUNC_HANDLERS_MAX] = {
#if MB_FUNC_OTHER_REP_SLAVEID_ENABLED > 0
    {MB_FUNC_OTHER_REPORT_SLAVEID, eMBFuncReportSlaveID},
#endif
#if MB_FUNC_READ_INPUT_ENABLED > 0
    {MB_FUNC_READ_INPUT_REGISTER, eMBFuncReadInputRegister},
#endif
#if MB_FUNC_READ_HOLDING_ENABLED > 0
    {MB_FUNC_READ_HOLDING_REGISTER, eMBFuncReadHoldingRegister},
#endif
#if MB_FUNC_WRITE_MULTIPLE_HOLDING_ENABLED > 0
    {MB_FUNC_WRITE_MULTIPLE_REGISTERS, eMBFuncWriteMultipleHoldingRegister},
#endif
#if MB_FUNC_WRITE_HOLDING_ENABLED > 0
    {MB_FUNC_WRITE_REGISTER, eMBFuncWriteHoldingRegister},
#endif
#if MB_FUNC_READWRITE_HOLDING_ENABLED > 0
    {MB_FUNC_READWRITE_MULTIPLE_REGISTERS, eMBFuncReadWriteMultipleHoldingRegister},
#endif
#if MB_FUNC_READ_COILS_ENABLED > 0
    {MB_FUNC_READ_COILS, eMBFuncReadCoils},
#endif
#if MB_FUNC_WRITE_COIL_ENABLED > 0
    {MB_FUNC_WRITE_SINGLE_COIL, eMBFuncWriteCoil},
#endif
#if MB_FUNC_WRITE_MULTIPLE_COILS_ENABLED > 0
    {MB_FUNC_WRITE_MULTIPLE_COILS, eMBFuncWriteMultipleCoils},
#endif
#if MB_FUNC_READ_DISCRETE_INPUTS_ENABLED > 0
    {MB_FUNC_READ_DISCRETE_INPUTS, eMBFuncReadDiscreteInputs},
#endif
};

/* ----------------------- Start implementation -----------------------------*/
eMBErrorCode
eMBInit( eMBMode eMode, UCHAR ucSlaveAddress, UCHAR ucPort, ULONG ulBaudRate, eMBParity eParity ) {
    eMBErrorCode    eStatus = MB_ENOERR;

    /* check preconditions */
    if ( ( ucSlaveAddress == MB_ADDRESS_BROADCAST ) ||
            ( ucSlaveAddress < MB_ADDRESS_MIN ) || ( ucSlaveAddress > MB_ADDRESS_MAX ) ) {
        eStatus = MB_EINVAL;
    } else {
        ucMBAddress = ucSlaveAddress;

        switch ( eMode ) {
#if MB_RTU_ENABLED > 0
            case MB_RTU:
                pvMBFrameStartCur = eMBRTUStart;
                pvMBFrameStopCur = eMBRTUStop;
                peMBFrameSendCur = eMBRTUSend;
                peMBFrameReceiveCur = eMBRTUReceive;
                pvMBFrameCloseCur = MB_PORT_HAS_CLOSE ? vMBPortClose : NULL;
                pxMBFrameCBByteReceived = xMBRTUReceiveFSM;
                pxMBFrameCBTransmitterEmpty = xMBRTUTransmitFSM;
                pxMBPortCBTimerExpired = xMBRTUTimerT35Expired;

                eStatus = eMBRTUInit( ucMBAddress, ucPort, ulBaudRate, eParity );
                break;
#endif
#if MB_ASCII_ENABLED > 0
            case MB_ASCII:
                pvMBFrameStartCur = eMBASCIIStart;
                pvMBFrameStopCur = eMBASCIIStop;
                peMBFrameSendCur = eMBASCIISend;
                peMBFrameReceiveCur = eMBASCIIReceive;
                pvMBFrameCloseCur = MB_PORT_HAS_CLOSE ? vMBPortClose : NULL;
                pxMBFrameCBByteReceived = xMBASCIIReceiveFSM;
                pxMBFrameCBTransmitterEmpty = xMBASCIITransmitFSM;
                pxMBPortCBTimerExpired = xMBASCIITimerT1SExpired;

                eStatus = eMBASCIIInit( ucMBAddress, ucPort, ulBaudRate, eParity );
                break;
#endif
            default:
                eStatus = MB_EINVAL;
        }

        if ( eStatus == MB_ENOERR ) {
            if ( !xMBPortEventInit(  ) ) {
                /* port dependent event module initalization failed. */
                eStatus = MB_EPORTERR;
            } else {
                eMBCurrentMode = eMode;
                eMBState = STATE_DISABLED;
            }
        }
    }
    return eStatus;
}

#if MB_RTU_CUSTOM_ENABLED > 0
eMBErrorCode
eMBRTUCustomInit( UCHAR ucSlaveAddress ) {
    eMBErrorCode    eStatus = MB_ENOERR;
    ucMBAddress = ucSlaveAddress;
    eStatus = eMBRTUCustInit( ucSlaveAddress );
    // if ( ( eStatus = eMBRTUCustInit( ucMBAddress ) ) != MB_ENOERR ) {
        eMBState = STATE_DISABLED;
    // } else 
    if ( !xMBPortEventInit(  ) ) {
        /* Port dependent event module initalization failed. */
        eStatus = MB_EPORTERR;
    }
     else {
        pvMBFrameStartCur = eMBRTUCustStart;
        pvMBFrameStopCur = eMBRTUCustStop;
        peMBFrameSendCur = eMBRTUCustSend;
        peMBFrameReceiveCur = eMBRTUCustReceive;
        pvMBFrameCloseCur = MB_PORT_HAS_CLOSE ? vMBPortClose : NULL;

        eMBCurrentMode = MB_RTU_CUSTOM;
        eMBState = STATE_DISABLED;
    }
    return eStatus;
}
#endif

#if MB_TCP_ENABLED > 0
eMBErrorCode
eMBTCPInit( USHORT ucTCPPort ) {
    eMBErrorCode    eStatus = MB_ENOERR;

    if ( ( eStatus = eMBTCPDoInit( ucTCPPort ) ) != MB_ENOERR ) {
        eMBState = STATE_DISABLED;
    } else if ( !xMBPortEventInit(  ) ) {
        /* Port dependent event module initalization failed. */
        eStatus = MB_EPORTERR;
    } else {
        pvMBFrameStartCur = eMBTCPStart;
        pvMBFrameStopCur = eMBTCPStop;
        peMBFrameReceiveCur = eMBTCPReceive;
        peMBFrameSendCur = eMBTCPSend;
        pvMBFrameCloseCur = MB_PORT_HAS_CLOSE ? vMBTCPPortClose : NULL;
        ucMBAddress = MB_TCP_PSEUDO_ADDRESS;
        eMBCurrentMode = MB_TCP;
        eMBState = STATE_DISABLED;
    }
    return eStatus;
}
#endif


eMBErrorCode
eMBRegisterCB( UCHAR ucFunctionCode, pxMBFunctionHandler pxHandler ) {
    int             i;
    eMBErrorCode    eStatus;

    if ( ( 0 < ucFunctionCode ) && ( ucFunctionCode <= 127 ) ) {
        ENTER_CRITICAL_SECTION(  );
        if ( pxHandler != NULL ) {
            for ( i = 0; i < MB_FUNC_HANDLERS_MAX; i++ ) {
                if ( ( xFuncHandlers[i].pxHandler == NULL ) ||
                        ( xFuncHandlers[i].pxHandler == pxHandler ) ) {
                    xFuncHandlers[i].ucFunctionCode = ucFunctionCode;
                    xFuncHandlers[i].pxHandler = pxHandler;
                    break;
                }
            }
            eStatus = ( i != MB_FUNC_HANDLERS_MAX ) ? MB_ENOERR : MB_ENORES;
        } else {
            for ( i = 0; i < MB_FUNC_HANDLERS_MAX; i++ ) {
                if ( xFuncHandlers[i].ucFunctionCode == ucFunctionCode ) {
                    xFuncHandlers[i].ucFunctionCode = 0;
                    xFuncHandlers[i].pxHandler = NULL;
                    break;
                }
            }
            /* Remove can't fail. */
            eStatus = MB_ENOERR;
        }
        EXIT_CRITICAL_SECTION(  );
    } else {
        eStatus = MB_EINVAL;
    }
    return eStatus;
}


eMBErrorCode
eMBClose( void ) {
    eMBErrorCode    eStatus = MB_ENOERR;

    if ( eMBState == STATE_DISABLED ) {
        if ( pvMBFrameCloseCur != NULL ) {
            pvMBFrameCloseCur(  );
        }
    } else {
        eStatus = MB_EILLSTATE;
    }
    return eStatus;
}

eMBErrorCode
eMBEnable( void ) {
    eMBErrorCode    eStatus = MB_ENOERR;

    if ( eMBState == STATE_DISABLED ) {
        /* Activate the protocol stack. */
        pvMBFrameStartCur(  );
        eMBState = STATE_ENABLED;
    } else {
        eStatus = MB_EILLSTATE;
    }
    return eStatus;
}

eMBErrorCode
eMBDisable( void ) {
    eMBErrorCode    eStatus;

    if ( eMBState == STATE_ENABLED ) {
        pvMBFrameStopCur(  );
        eMBState = STATE_DISABLED;
        eStatus = MB_ENOERR;
    } else if ( eMBState == STATE_DISABLED ) {
        eStatus = MB_ENOERR;
    } else {
        eStatus = MB_EILLSTATE;
    }
    return eStatus;
}

eMBErrorCode
eMBPoll( void ) {
    static UCHAR   *ucMBFrame;
    static UCHAR    ucRcvAddress;
    static UCHAR    ucFunctionCode;
    static USHORT   usLength;
    static eMBException eException;

    int             i;
    eMBErrorCode    eStatus = MB_ENOERR;
    eMBEventType    eEvent;

    /* Check if the protocol stack is ready. */
    if ( eMBState != STATE_ENABLED ) {
        return MB_EILLSTATE;
    }

    /* Check if there is a event available. If not return control to caller.
     * Otherwise we will handle the event. */
    if ( xMBPortEventGet( &eEvent ) == TRUE ) {
        switch ( eEvent ) {
            case EV_READY:
                break;

            case EV_FRAME_RECEIVED:
                eStatus = peMBFrameReceiveCur( &ucRcvAddress, &ucMBFrame, &usLength );
                if ( eStatus == MB_ENOERR ) {
                    /* Check if the frame is for us. If not ignore the frame. */
                    if ( ( ucRcvAddress == ucMBAddress ) || ( ucRcvAddress == MB_ADDRESS_BROADCAST ) ) {
                        ( void )xMBPortEventPost( EV_EXECUTE );
                    }
                }
                break;

            case EV_EXECUTE:
                ucFunctionCode = ucMBFrame[MB_PDU_FUNC_OFF];
                eException = MB_EX_ILLEGAL_FUNCTION;
                
 
                for ( i = 0; i < MB_FUNC_HANDLERS_MAX; i++ ) {
                    /* No more function handlers registered. Abort. */
                    if ( xFuncHandlers[i].ucFunctionCode == 0 ) {
                        break;
                    } else if ( xFuncHandlers[i].ucFunctionCode == ucFunctionCode ) {
                        eException = xFuncHandlers[i].pxHandler( ucMBFrame, &usLength );
                        break;
                    }
                }

                /* If the request was not sent to the broadcast address we
                 * return a reply. */
                if ( ucRcvAddress != MB_ADDRESS_BROADCAST ) {
                    if ( eException != MB_EX_NONE ) {
                        /* An exception occured. Build an error frame. */
                        usLength = 0;
                        ucMBFrame[usLength++] = ( UCHAR )( ucFunctionCode | MB_FUNC_ERROR );
                        ucMBFrame[usLength++] = eException;
                    }
                    eStatus = peMBFrameSendCur( ucMBAddress, ucMBFrame, usLength );
                }
                break;

            case EV_FRAME_SENT:
                break;
        }
    }
    return MB_ENOERR;
}