MAX8971 1-Cell LI+ DC-DC Charger Driver. Datasheet is available at https://datasheets.maximintegrated.com/en/ds/MAX8971.pdf. And it was tested using MAX32630FTHR Board.

Fork of max77801 by Daniel Geonsi Jeong

Revision:
1:96e05ce748c1
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/max8971.h	Tue Jun 26 08:05:21 2018 +0000
@@ -0,0 +1,474 @@
+/*******************************************************************************
+ * Copyright (C) 2018 Maxim Integrated Products, Inc., All Rights Reserved.
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a
+ * copy of this software and associated documentation files (the "Software"),
+ * to deal in the Software without restriction, including without limitation
+ * the rights to use, copy, modify, merge, publish, distribute, sublicense,
+ * and/or sell copies of the Software, and to permit persons to whom the
+ * Software is furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included
+ * in all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS
+ * OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF
+ * MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT.
+ * IN NO EVENT SHALL MAXIM INTEGRATED BE LIABLE FOR ANY CLAIM, DAMAGES
+ * OR OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE,
+ * ARISING FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR
+ * OTHER DEALINGS IN THE SOFTWARE.
+ *
+ * Except as contained in this notice, the name of Maxim Integrated
+ * Products, Inc. shall not be used except as stated in the Maxim Integrated
+ * Products, Inc. Branding Policy.
+ *
+ * The mere transfer of this software does not imply any licenses
+ * of trade secrets, proprietary technology, copyrights, patents,
+ * trademarks, maskwork rights, or any other form of intellectual
+ * property whatsoever. Maxim Integrated Products, Inc. retains all
+ * ownership rights.
+ *******************************************************************************
+ */ 
+#ifndef _max8971_H_
+#define _max8971_H_
+ 
+#include "mbed.h"
+
+class MAX8971
+{
+ 
+public:
+    /**
+     * @brief   Register Addresses
+     * @details Enumerated max8971 register addresses
+     */
+    typedef enum {
+        REG_CHGINT_INT = 0x0F,
+        REG_CHGINT_MASK = 0x01,
+        REG_CHG_STAT,
+        REG_DETAILS1,
+        REG_DETAILS2,
+        REG_CHGCNTL1,
+        REG_FCHGCRNT,
+        REG_DCCRNT,
+        REG_TOPOFF,
+        REG_TEMPREG,
+        REG_PROTCMD        
+    } registers_t;
+   
+    /**
+     * @brief   Interrupt Unmasked/Masked
+     * @details Enumerated Interrupt Unmasked/Masked
+     */
+    typedef enum {
+        VAL_INT_UNMASKED = 0x00,
+        VAL_INT_MASKED
+    } int_mask_t;
+ 
+    /**
+     * @brief   Interrupt Unmasked/Masked
+     * @details Enumerated Interrupt Unmasked/Masked
+     */
+    typedef enum {
+        VAL_AICL_I_BIT  = 7,
+        VAL_TOP_OFF_BIT = 6,
+        VAL_DC_OVP_BIT  = 5,
+        VAL_DC_UVP_BIT  = 4,
+        VAL_CHG_I_BIT   = 3,
+        VAL_BAT_I_BIT   = 2,
+        VAL_THM_I_BIT   = 1,
+        VAL_POWERUP_BIT = 0,
+    } int_bit_t;
+    
+    /**
+     * @brief   ENABLE/DISABLE
+     * @details Enumerated ENABLE/DISABLE
+     */
+    typedef enum {
+        VAL_DISABLE = 0x00,
+        VAL_ENABLE
+    } enable_t;
+    
+    /**
+     * @brief   Fast Charge Timer 
+     * @details Enumerated Fast Charge Timer Duration
+     */
+    typedef enum {
+        VAL_FC_TIMER_DISABLE = 0x00,
+        VAL_FC_TIMER_4_HOURS,
+        VAL_FC_TIMER_5_HOURS,
+        VAL_FC_TIMER_6_HOURS,
+        VAL_FC_TIMER_7_HOURS,
+        VAL_FC_TIMER_8_HOURS,
+        VAL_FC_TIMER_9_HOURS,
+        VAL_FC_TIMER_10_HOURS
+    } fast_charge_timer_t;
+  
+    /**
+     * @brief   Fast Charge Restart Threshold 
+     * @details Enumerated Fast Charge Restart Threshold
+     */
+    typedef enum {
+        VAL_FC_RESTART_MINUS_150mV = 0x00,
+        VAL_FC_RESTART_MINUS_100mV,
+    } fast_charge_restart_threshold_t;
+  
+    /**
+     * @brief   Topoff timer 
+     * @details Enumerated Topoff Timer 
+     */
+    typedef enum {
+        VAL_TOPOFF_TIMER_0_MIN = 0x00,
+        VAL_TOPOFF_TIMER_10_MIN,
+        VAL_TOPOFF_TIMER_20_MIN,
+        VAL_TOPOFF_TIMER_30_MIN,
+        VAL_TOPOFF_TIMER_40_MIN,
+        VAL_TOPOFF_TIMER_50_MIN,
+        VAL_TOPOFF_TIMER_60_MIN,
+        VAL_TOPOFF_TIMER_70_MIN
+    } top_off_timer_t;      
+        
+    /**
+     * @brief   Topoff Current Threshold
+     * @details Enumerated Topoff Current Threshold
+     */
+    typedef enum {
+        VAL_TOPOFF_CURRENT_TH_50_mA = 0x00,
+        VAL_TOPOFF_CURRENT_TH_100_mA,
+        VAL_TOPOFF_CURRENT_TH_150_mA,
+        VAL_TOPOFF_CURRENT_TH_200_mA
+    } top_off_current_threshold_t;      
+        
+    /**
+     * @brief   Charge Termination Voltage
+     * @details Enumerated Charge Termination Voltage
+     */
+    typedef enum {
+        VAL_CHARGE_TERM_4200_mV = 0x00,
+        VAL_CHARGE_TERM_4100_mV,
+        VAL_CHARGE_TERM_4350_mV,
+        VAL_CHARGE_TERM_4150_mV
+    } charger_termination_voltage_t;      
+        
+    /**
+     * @brief   Die Temperature Thermal Regualation Loop Set Point
+     * @details Enumerated Die Temperature Thermal Regualation Loop Set Point
+     */
+    typedef enum {
+        VAL_DIE_TEMP_REG_POINT_105_DEG = 0x00,
+        VAL_DIE_TEMP_REG_POINT_90_DEG,
+        VAL_DIE_TEMP_REG_POINT_120_DEG,
+        VAL_DIE_TEMP_REG_POINT_DISABLE,
+    } die_temp_reggulation_point_t; 
+                
+    /**
+     * @brief   Thermistor Monitor Configuration
+     * @details Enumerated Thermistor Monitor Configuration
+     */
+    typedef enum {
+        VAL_THERMISTOR_MONITOR_ENABLE = 0x00,
+        VAL_THERMISTOR_MONITOR_DISABLE,
+    } thermistor_monitor_config_t; 
+                
+    /**
+     * @brief   JEITA Safety
+     * @details Enumerated JEITA Safety Region Selection
+     */
+    typedef enum {
+        VAL_JEITA_SAFETY_REGION_1 = 0x00,
+        VAL_JEITA_SAFETY_REGION_2,
+    } jeita_safety_selection_t; 
+                  
+    /**
+     * @brief   Charger Setting Protection
+     * @details Enumerated Charger Setting Protection
+     */
+    typedef enum {
+        VAL_CHARGER_SETTING_LOCKED = 0x00,
+        VAL_CHARGER_SETTING_UNLOCKED = 0x03
+    } charger_setting_protection_t; 
+        
+        
+    /**
+      * max8971 constructor.
+      *
+      * @param i2c I2C object to use.
+      */
+    MAX8971(I2C *i2c);
+ 
+    /**
+      * max8971 destructor.
+      */
+    ~MAX8971();
+  
+    /**
+      * @brief   Initialize max8971
+      */
+    int32_t init();
+ 
+    /**
+      * @brief   Write Register
+      * @details Writes data to max8971 register
+      *
+      * @param   reg_addr Register to write
+      * @param   reg_data Data to write
+      * @returns 0 if no errors, -1 if error.
+      */
+    int32_t write_register(MAX8971::registers_t reg_addr, char reg_data);
+ 
+    /**
+      * @brief   Read Register
+      * @details Reads data from max8971 register
+      *
+      * @param   reg_addr Register to read
+      * @returns data if no errors, -1 if error.
+      */
+    int32_t read_register(MAX8971::registers_t reg_addr);
+    
+    /**
+      * @brief   Update Register data
+      * @details Update bits data of a register 
+      *
+      * @param   reg_no Register Number to be updated
+      * @param   mask Mask Data
+      * @param   reg_data bit data
+      * @returns 0 if no errors, -1 if error.
+      */
+    int32_t update_register
+    (MAX8971::registers_t reg_no, char reg_mask,  char reg_data);
+       
+
+    /**
+      * @brief   Get Interrupt
+      * @details Get status register data
+      *          BIT7 : AICL_I DC Interrupt
+      *          BIT6 : TOPOFF Topoff Interrupt
+      *          BIT5 : DC Overvolatage Interrupt
+      *          BIT4 : DC Undervoltage Interrupt
+      *          BIT3 : Charge Current Interrupt
+      *          BIT2 : Battery Interrupt
+      *          BIT1 : Thermistor Interrupt
+      *          BIT0 : Power-Up OK Interrupt
+      * @param   None
+      * @returns Interrupt register data.
+      */
+    int32_t get_interrupt();
+
+    /**
+      * @brief   Set Interrupt Mask
+      * @details Get status register data
+      *          BIT7 : AICL_I DC Interrupt
+      *          BIT6 : TOPOFF Topoff Interrupt
+      *          BIT5 : DC Overvolatage Interrupt
+      *          BIT4 : DC Undervoltage Interrupt
+      *          BIT3 : Charge Current Interrupt
+      *          BIT2 : Battery Interrupt
+      *          BIT1 : Thermistor Interrupt
+      *          BIT0 : Reserved
+      * @param   Register Number, Interrupt Bit
+      * @returns Interrupt register data.
+      */
+    int32_t set_interrupt_mask
+        (MAX8971::registers_t reg_no, MAX8971::int_bit_t interrupt_bit);
+
+
+    /**
+      * @brief   Set Interrupt UnMask
+      * @details Get status register data
+      *          BIT7 : AICL_I DC Interrupt
+      *          BIT6 : TOPOFF Topoff Interrupt
+      *          BIT5 : DC Overvolatage Interrupt
+      *          BIT4 : DC Undervoltage Interrupt
+      *          BIT3 : Charge Current Interrupt
+      *          BIT2 : Battery Interrupt
+      *          BIT1 : Thermistor Interrupt
+      *          BIT0 : Reserved
+      * @param   Register Number, Interrupt Bit
+      * @returns Interrupt register data.
+      */
+    int32_t set_interrupt_unmask
+        (MAX8971::registers_t reg_no, MAX8971::int_bit_t interrupt_bit);
+
+    /**
+      * @brief   Get status
+      * @details Get status register data
+      *          BIT7 : DCV_OK DC Input Voltage Status
+      *          BIT6 : DCI_OK DC Input Current Status
+      *          BIT5 : DCOVP_OK DC OVP Status
+      *          BIT4 : DCUVP_OK DC UVP Status
+      *          BIT3 : CHG_OK Charger Status
+      *          BIT2 : BAT_OK Battery Status
+      *          BIT1 : THM_OK Thermistor Status
+      *          BIT0 : RESERVED
+      * @param   None
+      * @returns status register data.
+      */
+    int32_t get_status();
+
+    /**
+      * @brief   Get Details 1
+      * @details Get Details 1 register data
+      *          BIT7 : DC Details
+      *          BIT6 : DC Current
+      *          BIT5 : DC OVP
+      *          BIT4 : DC UVP
+      *          BIT3 : RESERVED
+      *          BIT2-0 : Thermistor Details
+      * @param   None
+      * @returns status register data.
+      */
+    int32_t get_details1();
+
+
+    /**
+      * @brief   Get Details 2
+      * @details Get Details 2 register data
+      *          BIT7-6 : Reserved
+      *          BIT5-4 : Battery Details
+      *          BIT3-0 : Charger Details
+      * @param   None
+      * @returns status details 2 register data.
+      */
+    int32_t get_details2();
+
+    /**
+      * @brief   Set DCMON_DIS
+      * @details Set to disable the monitoring of input voltage
+      *          by the input power limiter
+      * @param   None
+      * @returns DCMON_DIS bit data.
+      */
+    int32_t set_disable_dc_monitor();
+
+    /**
+      * @brief   UnSet DCMON_DIS
+      * @details UnSet to enable the monitoring of input voltage
+      *          by the input power limiter
+      * @param   None
+      * @returns DCMON_DIS bit data.
+      */
+    int32_t unset_disable_dc_monitor();
+/**
+  * @brief   Set USB SUSPEND
+  * @details Set to USB Suspend bit 
+  * @param   None
+  * @returns USB SUSPEND bit data.
+  */
+int32_t set_usb_suspend();
+
+/**
+  * @brief   UnSet USB SUSPEND
+  * @details UnSet to USB Suspend bit 
+  * @param   None
+  * @returns USB SUSPEND bit data.
+  */
+int32_t unset_usb_suspend();
+
+/**
+  * @brief   Set Fast Charge Current
+  * @details Set to CHGCC bit to control Fast Charge Current
+  * @param   int 0-1550
+  * @returns Fast Charge Current.
+  */
+int32_t set_fast_charge_current(int current);
+
+/**
+  * @brief   Set Fast Charge Timer Duration
+  * @details Set to FCHGT bit to control Fast Charge Timer
+  * @param   fast_charge_timer_t
+  * @returns Fast Charge Timer Bit Data.
+  */
+int32_t set_fast_charge_timer(MAX8971::fast_charge_timer_t fc_time);
+
+/**
+  * @brief   Set Input Current Limit
+  * @details Set to DCILMT to control Input Current Limit
+  *          0x00 - 0x09 : 100mA
+  *          0x10 - 1x3C : 250 mA - 1500 mA with 25m A
+  * @param   int 0-1500
+  * @returns DCILMT bit Data.
+  */
+  
+/**
+  * @brief   Set Fast Restart Threshold
+  * @details Set to CHGRSTRT bit to control Fast Restart Threshold
+  * @param   fast_charge_restart_threshold_t
+  * @returns CHGRSTRT bit Data.
+  */
+int32_t set_fast_charge_restart_threshold
+(MAX8971::fast_charge_restart_threshold_t voltage);
+
+int32_t set_input_current_limit(int limit);
+
+/**
+  * @brief   Set Topoff Timer
+  * @details Set to TOFFT bit to control Topoff Timer
+  * @param   top_off_timer_t
+  * @returns TOFFT bit Data.
+  */
+int32_t set_top_off_timer(MAX8971::top_off_timer_t time);
+
+/**
+  * @brief   Set Topoff Current Threshold
+  * @details Set to TOFFS bit to control Topoff Current Threshold
+  * @param   top_off_current_threshold_t
+  * @returns TOFFS bit Data.
+  */
+int32_t set_top_off_current_threshold
+(MAX8971::top_off_current_threshold_t current);
+
+/**
+  * @brief   Set Charge Termination Voltage
+  * @details Set to CHGCV bit to control Charge Termination Voltage in CV Mode
+  * @param   charger_termination_voltage_t
+  * @returns CHGCV bit Data.
+  */
+int32_t set_charge_termination_voltage
+(MAX8971::charger_termination_voltage_t voltage);
+
+/**
+  * @brief   Set Die-Temperature Regulation Loop Set Point
+  * @details Set REGTEMP bit to control 
+  *          Die-Temperature Regulation Loop Set Point
+  * @param   die_temp_reggulation_point_t
+  * @returns REGTEMP bit Data.
+  */
+int32_t set_charge_termination_voltage
+(MAX8971::die_temp_reggulation_point_t degree);
+
+/**
+  * @brief   Set Thermistor Monitor Configuration
+  * @details Set THM_CNFG bit to control the Thermistor Monitor Configuration
+  * @param   thermistor_monitor_config_t
+  * @returns REGTEMP bit Data.
+  */
+int32_t set_thermistor_monitor
+(MAX8971::thermistor_monitor_config_t enable);
+
+/**
+  * @brief   Set JEITA Safty Region
+  * @details Set SAFETYREG bit to control the JEITA Safty Region
+  * @param   jeita_safety_selection_t
+  * @returns SAFETYREG bit Data.
+  */
+int32_t set_jeita_safety_region
+(MAX8971::jeita_safety_selection_t enable);
+
+/**
+  * @brief   Set Charger-Setting Protection
+  * @details Set CPROT bit to control Charger-Setting Protection
+  * @param   charger_setting_protection_t
+  * @returns CPROT bit Data.
+  */
+int32_t set_charger_setting_protection
+(MAX8971::charger_setting_protection_t enable);
+
+
+private:
+ 
+    I2C *i2c_;
+    bool i2c_owner;
+ 
+};
+#endif /* _max8971_H_ */
\ No newline at end of file