Revision 10:4f206e833249, committed 2015-02-15

Comitter:

daisukekmr

Date:

Sun Feb 15 04:34:59 2015 +0000

Parent:

9:95ab3243d929

Commit message:

add light sensor.; make http get request a function.

Changed in this revision

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/ADC_full/adc.cpp	Sun Feb 15 04:34:59 2015 +0000
@@ -0,0 +1,439 @@
+/* mbed Library - ADC
+ * Copyright (c) 2010, sblandford
+ * released under MIT license http://mbed.org/licence/mit
+ */
+#include "mbed.h"
+#include "adc.h"
+
+
+ADC *ADC::instance;
+
+ADC::ADC(int sample_rate, int cclk_div)
+    {
+
+    int i, adc_clk_freq, pclk, clock_div, max_div=1;
+
+    //Work out CCLK
+    adc_clk_freq=CLKS_PER_SAMPLE*sample_rate;
+    int m = (LPC_SC->PLL0CFG & 0xFFFF) + 1;
+    int n = (LPC_SC->PLL0CFG >> 16) + 1;
+    int cclkdiv = LPC_SC->CCLKCFG + 1;
+    int Fcco = (2 * m * XTAL_FREQ) / n;
+    int cclk = Fcco / cclkdiv;
+
+    //Power up the ADC        
+    LPC_SC->PCONP |= (1 << 12);
+    //Set clock at cclk / 1.
+    LPC_SC->PCLKSEL0 &= ~(0x3 << 24);    
+    switch (cclk_div) {
+        case 1:
+            LPC_SC->PCLKSEL0 |= 0x1 << 24;
+            break;
+        case 2:
+            LPC_SC->PCLKSEL0 |= 0x2 << 24;
+            break;
+        case 4:
+            LPC_SC->PCLKSEL0 |= 0x0 << 24;
+            break;
+        case 8:
+            LPC_SC->PCLKSEL0 |= 0x3 << 24;
+            break;
+        default:
+            fprintf(stderr, "Warning: ADC CCLK clock divider must be 1, 2, 4 or 8. %u supplied.\n",
+                cclk_div);
+            fprintf(stderr, "Defaulting to 1.\n");
+            LPC_SC->PCLKSEL0 |= 0x1 << 24;
+            break;
+    }
+    pclk = cclk / cclk_div;
+    clock_div=pclk / adc_clk_freq;
+
+    if (clock_div > 0xFF) {
+        fprintf(stderr, "Warning: Clock division is %u which is above 255 limit. Re-Setting at limit.\n",
+            clock_div);
+        clock_div=0xFF;
+    }
+    if (clock_div == 0) {
+        fprintf(stderr, "Warning: Clock division is 0. Re-Setting to 1.\n");
+        clock_div=1;
+    }
+
+    _adc_clk_freq=pclk / clock_div;
+    if (_adc_clk_freq > MAX_ADC_CLOCK) {
+        fprintf(stderr, "Warning: Actual ADC sample rate of %u which is above %u limit\n",
+            _adc_clk_freq / CLKS_PER_SAMPLE, MAX_ADC_CLOCK / CLKS_PER_SAMPLE);
+        while ((pclk / max_div) > MAX_ADC_CLOCK) max_div++;
+        fprintf(stderr, "Maximum recommended sample rate is %u\n", (pclk / max_div) / CLKS_PER_SAMPLE);
+    }
+
+    LPC_ADC->ADCR =
+        ((clock_div - 1 ) << 8 ) |    //Clkdiv
+        ( 1 << 21 );                  //A/D operational
+
+    //Default no channels enabled
+    LPC_ADC->ADCR &= ~0xFF;
+    //Default NULL global custom isr
+    _adc_g_isr = NULL;
+    //Initialize arrays
+    for (i=7; i>=0; i--) {
+        _adc_data[i] = 0;
+        _adc_isr[i] = NULL;
+    }
+
+
+    //* Attach IRQ
+    instance = this;
+    NVIC_SetVector(ADC_IRQn, (uint32_t)&_adcisr);
+
+    //Disable global interrupt
+    LPC_ADC->ADINTEN &= ~0x100;
+
+};
+
+void ADC::_adcisr(void)
+{
+    instance->adcisr();
+}
+
+
+void ADC::adcisr(void)  
+{
+    uint32_t stat;
+    int chan;
+
+    // Read status
+    stat = LPC_ADC->ADSTAT;
+    //Scan channels for over-run or done and update array
+    if (stat & 0x0101) _adc_data[0] = LPC_ADC->ADDR0;
+    if (stat & 0x0202) _adc_data[1] = LPC_ADC->ADDR1;
+    if (stat & 0x0404) _adc_data[2] = LPC_ADC->ADDR2;
+    if (stat & 0x0808) _adc_data[3] = LPC_ADC->ADDR3;
+    if (stat & 0x1010) _adc_data[4] = LPC_ADC->ADDR4;
+    if (stat & 0x2020) _adc_data[5] = LPC_ADC->ADDR5;
+    if (stat & 0x4040) _adc_data[6] = LPC_ADC->ADDR6;
+    if (stat & 0x8080) _adc_data[7] = LPC_ADC->ADDR7;
+
+    // Channel that triggered interrupt
+    chan = (LPC_ADC->ADGDR >> 24) & 0x07;
+    //User defined interrupt handlers
+    if (_adc_isr[chan] != NULL)
+        _adc_isr[chan](_adc_data[chan]);
+    if (_adc_g_isr != NULL)
+        _adc_g_isr(chan, _adc_data[chan]); 
+    return;
+}
+
+int ADC::_pin_to_channel(PinName pin) {
+    int chan;
+    switch (pin) {
+        case p15://=p0.23 of LPC1768
+        default:
+            chan=0;
+            break;
+        case p16://=p0.24 of LPC1768
+            chan=1;
+            break;
+        case p17://=p0.25 of LPC1768
+            chan=2;
+            break;
+        case p18://=p0.26 of LPC1768
+            chan=3;
+            break;
+        case p19://=p1.30 of LPC1768
+            chan=4;
+            break;
+        case p20://=p1.31 of LPC1768
+            chan=5;
+            break;
+    }
+    return(chan);
+}
+
+PinName ADC::channel_to_pin(int chan) {
+    const PinName pin[8]={p15, p16, p17, p18, p19, p20, p15, p15};
+    
+    if ((chan < 0) || (chan > 5))
+        fprintf(stderr, "ADC channel %u is outside range available to MBED pins.\n", chan);
+    return(pin[chan & 0x07]);
+} 
+
+
+int ADC::channel_to_pin_number(int chan) {
+    const int pin[8]={15, 16, 17, 18, 19, 20, 0, 0};
+    
+    if ((chan < 0) || (chan > 5))
+        fprintf(stderr, "ADC channel %u is outside range available to MBED pins.\n", chan);
+    return(pin[chan & 0x07]);
+} 
+
+
+uint32_t ADC::_data_of_pin(PinName pin) {
+    //If in burst mode and at least one interrupt enabled then
+    //take all values from _adc_data
+    if (burst() && (LPC_ADC->ADINTEN & 0x3F)) {
+        return(_adc_data[_pin_to_channel(pin)]);
+    } else {
+        //Return current register value or last value from interrupt
+        switch (pin) {
+            case p15://=p0.23 of LPC1768
+            default:
+                return(LPC_ADC->ADINTEN & 0x01?_adc_data[0]:LPC_ADC->ADDR0);
+            case p16://=p0.24 of LPC1768
+                return(LPC_ADC->ADINTEN & 0x02?_adc_data[1]:LPC_ADC->ADDR1);
+            case p17://=p0.25 of LPC1768
+                return(LPC_ADC->ADINTEN & 0x04?_adc_data[2]:LPC_ADC->ADDR2);
+            case p18://=p0.26 of LPC1768:
+                return(LPC_ADC->ADINTEN & 0x08?_adc_data[3]:LPC_ADC->ADDR3);
+            case p19://=p1.30 of LPC1768
+                return(LPC_ADC->ADINTEN & 0x10?_adc_data[4]:LPC_ADC->ADDR4);
+            case p20://=p1.31 of LPC1768
+                return(LPC_ADC->ADINTEN & 0x20?_adc_data[5]:LPC_ADC->ADDR5);
+        }
+    }
+}
+
+//Enable or disable an ADC pin
+void ADC::setup(PinName pin, int state) {
+    int chan;    
+    chan=_pin_to_channel(pin);
+    if ((state & 1) == 1) {
+        switch(pin) {
+            case p15://=p0.23 of LPC1768
+            default:
+                LPC_PINCON->PINSEL1 &= ~((unsigned int)0x3 << 14);
+                LPC_PINCON->PINSEL1 |= (unsigned int)0x1 << 14;
+                LPC_PINCON->PINMODE1 &= ~((unsigned int)0x3 << 14);
+                LPC_PINCON->PINMODE1 |= (unsigned int)0x2 << 14;
+                break;
+            case p16://=p0.24 of LPC1768
+                LPC_PINCON->PINSEL1 &= ~((unsigned int)0x3 << 16);
+                LPC_PINCON->PINSEL1 |= (unsigned int)0x1 << 16;
+                LPC_PINCON->PINMODE1 &= ~((unsigned int)0x3 << 16);
+                LPC_PINCON->PINMODE1 |= (unsigned int)0x2 << 16;
+                break;
+            case p17://=p0.25 of LPC1768
+                LPC_PINCON->PINSEL1 &= ~((unsigned int)0x3 << 18);
+                LPC_PINCON->PINSEL1 |= (unsigned int)0x1 << 18;
+                LPC_PINCON->PINMODE1 &= ~((unsigned int)0x3 << 18);
+                LPC_PINCON->PINMODE1 |= (unsigned int)0x2 << 18;
+                break;
+            case p18://=p0.26 of LPC1768:
+                LPC_PINCON->PINSEL1 &= ~((unsigned int)0x3 << 20);
+                LPC_PINCON->PINSEL1 |= (unsigned int)0x1 << 20;
+                LPC_PINCON->PINMODE1 &= ~((unsigned int)0x3 << 20);
+                LPC_PINCON->PINMODE1 |= (unsigned int)0x2 << 20;
+                break;
+            case p19://=p1.30 of LPC1768
+                LPC_PINCON->PINSEL3 &= ~((unsigned int)0x3 << 28);
+                LPC_PINCON->PINSEL3 |= (unsigned int)0x3 << 28;
+                LPC_PINCON->PINMODE3 &= ~((unsigned int)0x3 << 28);
+                LPC_PINCON->PINMODE3 |= (unsigned int)0x2 << 28;
+                break;
+            case p20://=p1.31 of LPC1768
+                LPC_PINCON->PINSEL3 &= ~((unsigned int)0x3 << 30);
+                LPC_PINCON->PINSEL3 |= (unsigned int)0x3 << 30;
+                LPC_PINCON->PINMODE3 &= ~((unsigned int)0x3 << 30);
+                LPC_PINCON->PINMODE3 |= (unsigned int)0x2 << 30;
+               break;
+        }
+        //Only one channel can be selected at a time if not in burst mode
+        if (!burst()) LPC_ADC->ADCR &= ~0xFF;
+        //Select channel
+        LPC_ADC->ADCR |= (1 << chan);
+    }
+    else {
+        switch(pin) {
+            case p15://=p0.23 of LPC1768
+            default:
+                LPC_PINCON->PINSEL1 &= ~((unsigned int)0x3 << 14);
+                LPC_PINCON->PINMODE1 &= ~((unsigned int)0x3 << 14);
+                break;
+            case p16://=p0.24 of LPC1768
+                LPC_PINCON->PINSEL1 &= ~((unsigned int)0x3 << 16);
+                LPC_PINCON->PINMODE1 &= ~((unsigned int)0x3 << 16);
+                break;
+            case p17://=p0.25 of LPC1768
+                LPC_PINCON->PINSEL1 &= ~((unsigned int)0x3 << 18);
+                LPC_PINCON->PINMODE1 &= ~((unsigned int)0x3 << 18);
+                break;
+            case p18://=p0.26 of LPC1768:
+                LPC_PINCON->PINSEL1 &= ~((unsigned int)0x3 << 20);
+                LPC_PINCON->PINMODE1 &= ~((unsigned int)0x3 << 20);
+                break;
+            case p19://=p1.30 of LPC1768
+                LPC_PINCON->PINSEL3 &= ~((unsigned int)0x3 << 28);
+                LPC_PINCON->PINMODE3 &= ~((unsigned int)0x3 << 28);
+                break;
+            case p20://=p1.31 of LPC1768
+                LPC_PINCON->PINSEL3 &= ~((unsigned int)0x3 << 30);
+                LPC_PINCON->PINMODE3 &= ~((unsigned int)0x3 << 30);
+                break;
+        }
+        LPC_ADC->ADCR &= ~(1 << chan);
+    }
+}
+//Return channel enabled/disabled state
+int ADC::setup(PinName pin) {
+    int chan;
+    
+    chan = _pin_to_channel(pin);
+    return((LPC_ADC->ADCR & (1 << chan)) >> chan);
+}
+
+//Select channel already setup
+void ADC::select(PinName pin) {
+    int chan;
+    
+    //Only one channel can be selected at a time if not in burst mode
+    if (!burst()) LPC_ADC->ADCR &= ~0xFF;
+    //Select channel
+    chan = _pin_to_channel(pin);
+    LPC_ADC->ADCR |= (1 << chan);
+}
+
+//Enable or disable burst mode
+void ADC::burst(int state) {
+    if ((state & 1) == 1) {
+        if (startmode(0) != 0)
+            fprintf(stderr, "Warning. startmode is %u. Must be 0 for burst mode.\n", startmode(0));
+        LPC_ADC->ADCR |= (1 << 16);
+    }
+    else 
+        LPC_ADC->ADCR &= ~(1 << 16);
+}
+//Return burst mode state
+int  ADC::burst(void) {
+    return((LPC_ADC->ADCR & (1 << 16)) >> 16);
+}
+
+//Set startmode and edge
+void ADC::startmode(int mode, int edge) {
+    int lpc_adc_temp;
+    
+    //Reset start mode and edge bit, 
+    lpc_adc_temp = LPC_ADC->ADCR & ~(0x0F << 24);
+    //Write with new values
+    lpc_adc_temp |= ((mode & 7) << 24) | ((edge & 1) << 27);
+    LPC_ADC->ADCR = lpc_adc_temp;
+}
+
+//Return startmode state according to mode_edge=0: mode and mode_edge=1: edge
+int ADC::startmode(int mode_edge){
+    switch (mode_edge) {
+        case 0:
+        default:
+            return((LPC_ADC->ADCR >> 24) & 0x07);
+        case 1:
+            return((LPC_ADC->ADCR >> 27) & 0x01);
+    }
+}
+
+//Start ADC conversion
+void ADC::start(void) {
+    startmode(1,0);
+}
+
+
+//Set interrupt enable/disable for pin to state
+void ADC::interrupt_state(PinName pin, int state) {
+    int chan;
+    
+    chan = _pin_to_channel(pin);
+    if (state == 1) {
+        LPC_ADC->ADINTEN &= ~0x100;
+        LPC_ADC->ADINTEN |= 1 << chan;
+        /* Enable the ADC Interrupt */
+        NVIC_EnableIRQ(ADC_IRQn);
+    } else {
+        LPC_ADC->ADINTEN &= ~( 1 << chan );
+        //Disable interrrupt if no active pins left
+        if ((LPC_ADC->ADINTEN & 0xFF) == 0)
+            NVIC_DisableIRQ(ADC_IRQn);
+    }
+}
+
+//Return enable/disable state of interrupt for pin
+int ADC::interrupt_state(PinName pin) {
+    int chan;
+        
+    chan = _pin_to_channel(pin);
+    return((LPC_ADC->ADINTEN >> chan) & 0x01);
+}
+
+
+//Attach custom interrupt handler replacing default
+void ADC::attach(void(*fptr)(void)) {
+    //* Attach IRQ
+    NVIC_SetVector(ADC_IRQn, (uint32_t)fptr);
+}
+
+//Restore default interrupt handler
+void ADC::detach(void) {
+    //* Attach IRQ
+    instance = this;
+    NVIC_SetVector(ADC_IRQn, (uint32_t)&_adcisr);
+}
+
+
+//Append interrupt handler for pin to function isr
+void ADC::append(PinName pin, void(*fptr)(uint32_t value)) {
+    int chan;
+        
+    chan = _pin_to_channel(pin);
+    _adc_isr[chan] = fptr;
+}
+
+//Append interrupt handler for pin to function isr
+void ADC::unappend(PinName pin) {
+    int chan;
+        
+    chan = _pin_to_channel(pin);
+    _adc_isr[chan] = NULL;
+}
+
+//Unappend global interrupt handler to function isr
+void ADC::append(void(*fptr)(int chan, uint32_t value)) {
+    _adc_g_isr = fptr;
+}
+
+//Detach global interrupt handler to function isr
+void ADC::unappend() {
+    _adc_g_isr = NULL;
+}
+
+//Set ADC offset
+void offset(int offset) {
+    LPC_ADC->ADTRM &= ~(0x07 << 4);
+    LPC_ADC->ADTRM |= (offset & 0x07) << 4;
+}
+
+//Return current ADC offset
+int offset(void) {
+    return((LPC_ADC->ADTRM >> 4) & 0x07);
+}
+
+//Return value of ADC on pin
+int ADC::read(PinName pin) {
+    //Reset DONE and OVERRUN flags of interrupt handled ADC data
+    _adc_data[_pin_to_channel(pin)] &= ~(((uint32_t)0x01 << 31) | ((uint32_t)0x01 << 30));
+    //Return value
+    return((_data_of_pin(pin) >> 4) & 0xFFF);
+}
+
+//Return DONE flag of ADC on pin
+int ADC::done(PinName pin) {
+    return((_data_of_pin(pin) >> 31) & 0x01);
+}
+
+//Return OVERRUN flag of ADC on pin
+int ADC::overrun(PinName pin) {
+    return((_data_of_pin(pin) >> 30) & 0x01);
+}
+
+int ADC::actual_adc_clock(void) {
+    return(_adc_clk_freq);
+}
+
+int ADC::actual_sample_rate(void) {
+    return(_adc_clk_freq / CLKS_PER_SAMPLE);
+}

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/ADC_full/adc.h	Sun Feb 15 04:34:59 2015 +0000
@@ -0,0 +1,131 @@
+/* mbed Library - ADC
+ * Copyright (c) 2010, sblandford
+ * released under MIT license http://mbed.org/licence/mit
+ */
+
+#ifndef MBED_ADC_H
+#define MBED_ADC_H
+ 
+#include "mbed.h"
+#define XTAL_FREQ       12000000
+#define MAX_ADC_CLOCK   13000000
+#define CLKS_PER_SAMPLE 64
+
+class ADC {
+public:
+
+    //Initialize ADC with ADC maximum sample rate of
+    //sample_rate and system clock divider of cclk_div
+    //Maximum recommened sample rate is 184000
+    ADC(int sample_rate, int cclk_div);
+
+    //Enable/disable ADC on pin according to state
+    //and also select/de-select for next conversion
+    void setup(PinName pin, int state);
+
+    //Return enabled/disabled state of ADC on pin
+    int setup(PinName pin);
+
+    //Enable/disable burst mode according to state
+    void burst(int state);
+
+    //Select channel already setup
+    void select(PinName pin);
+
+    //Return burst mode enabled/disabled
+    int burst(void);
+
+    /*Set start condition and edge according to mode:
+    0 - No start (this value should be used when clearing PDN to 0).
+    1 - Start conversion now.
+    2 - Start conversion when the edge selected by bit 27 occurs on the P2.10 / EINT0 / NMI pin.
+    3 - Start conversion when the edge selected by bit 27 occurs on the P1.27 / CLKOUT /
+        USB_OVRCRn / CAP0.1 pin.
+    4 - Start conversion when the edge selected by bit 27 occurs on MAT0.1. Note that this does
+        not require that the MAT0.1 function appear on a device pin.
+    5 - Start conversion when the edge selected by bit 27 occurs on MAT0.3. Note that it is not
+        possible to cause the MAT0.3 function to appear on a device pin.
+    6 - Start conversion when the edge selected by bit 27 occurs on MAT1.0. Note that this does
+        not require that the MAT1.0 function appear on a device pin.
+    7 - Start conversion when the edge selected by bit 27 occurs on MAT1.1. Note that this does
+        not require that the MAT1.1 function appear on a device pin.
+    When mode >= 2, conversion is triggered by edge:
+    0 - Rising edge
+    1 - Falling edge
+    */
+    void startmode(int mode, int edge);
+    
+    //Return startmode state according to mode_edge=0: mode and mode_edge=1: edge
+    int startmode(int mode_edge);
+    
+    //Start ADC conversion
+    void start(void);
+
+    //Set interrupt enable/disable for pin to state
+    void interrupt_state(PinName pin, int state);
+    
+    //Return enable/disable state of interrupt for pin
+    int interrupt_state(PinName pin);
+
+    //Attach custom interrupt handler replacing default
+    void attach(void(*fptr)(void));
+
+    //Restore default interrupt handler
+    void detach(void);
+
+    //Append custom interrupt handler for pin
+    void append(PinName pin, void(*fptr)(uint32_t value));
+
+    //Unappend custom interrupt handler for pin
+    void unappend(PinName pin);
+
+    //Append custom global interrupt handler
+    void append(void(*fptr)(int chan, uint32_t value));
+
+    //Unappend custom global interrupt handler
+    void unappend(void);
+
+    //Set ADC offset to a value 0-7
+    void offset(int offset);
+    
+    //Return current ADC offset
+    int offset(void);
+
+    //Return value of ADC on pin
+    int read(PinName pin);
+
+    //Return DONE flag of ADC on pin
+    int done(PinName pin);
+    
+    //Return OVERRUN flag of ADC on pin
+    int overrun(PinName pin);
+
+    //Return actual ADC clock
+    int actual_adc_clock(void);
+    
+    //Return actual maximum sample rate
+    int actual_sample_rate(void);
+
+    //Return pin ID of ADC channel
+    PinName channel_to_pin(int chan);
+
+    //Return pin number of ADC channel
+    int channel_to_pin_number(int chan);
+
+
+private:
+    int _pin_to_channel(PinName pin);
+    uint32_t _data_of_pin(PinName pin);
+
+    int _adc_clk_freq;
+    void adcisr(void);
+    static void _adcisr(void);
+    static ADC *instance;
+    
+    uint32_t _adc_data[8];
+    void(*_adc_isr[8])(uint32_t value);
+    void(*_adc_g_isr)(int chan, uint32_t value);
+    void(*_adc_m_isr)(void);
+};
+
+#endif
\ No newline at end of file

--- a/main.cpp	Sun Feb 15 01:34:25 2015 +0000
+++ b/main.cpp	Sun Feb 15 04:34:59 2015 +0000
@@ -6,10 +6,13 @@
 #include "PowerControl/EthernetPowerControl.h"
 #endif
 
+#include "adc.h"        //a+
+
 #define DEMO_AP_SSID                  "nad11-10e168"
 #define DEMO_AP_SECURITY_TYPE         e_SEC_WPA2_AES
 #define DEMO_AP_SECUTIRY_KEY          "18e36c5e791f9"
 #define WAIT 10.0
+#define SAMPLE_RATE    150000   // a+
 
 C_SNIC_WifiInterface     wifi( p9, p10, NC, NC, p30 );
 
@@ -18,10 +21,30 @@
 #endif
 
 DigitalIn PIR(p8);
-
+//AnalogIn LIGHT(p20);
 HTTPClient http;
 char str[512];
 
+
+int HTTPGET(char* sensortype, int value)
+{
+    //GET data
+    printf("\nTrying to fetch page...\n");
+    char buf[128];
+    sprintf(buf, "http://192.168.179.7/put?type=%s&value=%d",sensortype, value);
+    int ret = http.get(buf, str, 128);
+    if (!ret)
+    {
+        printf("Page fetched successfully - read %d characters\n", strlen(str));
+        printf("Result: %s\n", str);
+    }
+    else
+    {
+    printf("Error - ret = %d - HTTP return code = %d\n", ret, http.getHTTPResponseCode());
+    }
+    return(0);
+}
+
 int main() 
 {
 #if defined(TARGET_LPC1768)
@@ -50,72 +73,54 @@
     printf("IP Address is %s\n", wifi.getIPAddress());
     
     //define var
+    int num = 0;
     int value;
     char* sensortype;
+    ADC adc(SAMPLE_RATE, 1);
     
     while(1)
     {
-        //for PIR sensor
-        //GET value from PIR sensor
-        sensortype = "PIR";
-        value = PIR;
-        //GET data
-        printf("\nTrying to fetch page...\n");
-        char buf[128];
-        sprintf(buf, "http://192.168.179.7/put?type=%s&value=%d",sensortype, value);
-        int ret = http.get(buf, str, 128);
-        if (!ret)
+        if( num == 0)
         {
-            printf("Page fetched successfully - read %d characters\n", strlen(str));
-            printf("Result: %s\n", str);
+            //for PIR sensor
+            //GET value from PIR sensor
+            sensortype = "PIR";
+            value = PIR;
+            num = PIR;
+            HTTPGET(sensortype, value);
         }
-        else
-        {
-        printf("Error - ret = %d - HTTP return code = %d\n", ret, http.getHTTPResponseCode());
-        }
-        wait(WAIT);
-        /*
-        //for THERMO
-        //GET value from THERMO sensor
-        sensortype = "THERMO";
-        value = Thermo;
-        //GET data
-        printf("\nTrying to fetch page...\n");
-        char buf[128];
-        sprintf(buf, "http://192.168.179.7/put?type=%s&value=%d",sensortype, value);
-        int ret = http.get(buf, str, 128);
-        if (!ret)
+
+        //for LIGHT
+        if(num == 1)
         {
-            printf("Page fetched successfully - read %d characters\n", strlen(str));
-            printf("Result: %s\n", str);
-        }
-        else
-        {
-        printf("Error - ret = %d - HTTP return code = %d\n", ret, http.getHTTPResponseCode());
+            for(int i=0; i<10; i++)
+            {
+                //GET value from LIGHT sensor
+                sensortype = "LIGHT";
+                // a+
+                //Set up ADC on pin 20
+                adc.setup(p20,1);
+                //Measure pin 20
+                adc.select(p20);
+                //Start ADC conversion
+                adc.start();
+                //Wait for it to complete
+                while(!adc.done(p20));
+                value = adc.read(p20);
+                printf("Measured value on pin 20 is %04u.\n", value);
+                HTTPGET(sensortype, value);
+                wait(0.2);
+                //GET value from THERMO sensor
+                /*
+                sensortype = "THERMO";
+                value = 
+                printf("THERMO value = %d", value);
+                HTTPGET(sensortype, value);
+                wait(0.2);
+                */
+            }
+            num = 0;
         }
-        wait(WAIT);
-        */
-        /*
-        //for LIGHT
-        //GET value from LIGHT sensor
-        sensortype = "LIGHT";
-        value = Light;
-        //GET data
-        printf("\nTrying to fetch page...\n");
-        char buf[128];
-        sprintf(buf, "http://192.168.179.7/put?type=%s&value=%d",sensortype, value);
-        int ret = http.get(buf, str, 128);
-        if (!ret)
-        {
-            printf("Page fetched successfully - read %d characters\n", strlen(str));
-            printf("Result: %s\n", str);
-        }
-        else
-        {
-        printf("Error - ret = %d - HTTP return code = %d\n", ret, http.getHTTPResponseCode());
-        }
-        wait(WAIT);
-        */
     }
 
     wifi.disconnect();