Daniel Worrall
Record audio data to a .wav file, complete with header, using the TLV320 CODEC and I2S port
Revision 0:e7efc8468066, committed 2011-08-05
- Comitter:
- d_worrall
- Date:
- Fri Aug 05 15:00:51 2011 +0000
- Commit message:
- version 2.0
Changed in this revision
diff -r 000000000000 -r e7efc8468066 FATFileSystem.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/FATFileSystem.lib Fri Aug 05 15:00:51 2011 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_unsupported/code/fatfilesystem/ \ No newline at end of file
diff -r 000000000000 -r e7efc8468066 I2SSlave.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/I2SSlave.lib Fri Aug 05 15:00:51 2011 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/d_worrall/code/I2SSlave/#aa3e863920d2
diff -r 000000000000 -r e7efc8468066 MSCFileSystem/MSCFileSystem.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/MSCFileSystem/MSCFileSystem.cpp Fri Aug 05 15:00:51 2011 +0000
@@ -0,0 +1,113 @@
+/* USB Mass Storage device file system
+ * Copyrigh (c) 2010, Igor Skochinsky
+ * based on SDFileStorage
+ * Copyright (c) 2008-2009, sford
+ */
+
+/* Introduction
+ * ------------
+ * TODO: write one
+ * we're basically using NXP's USBHotLite sample code, just plugging in our own FAT library
+ */
+
+#include "MSCFileSystem.h"
+#include "usbhost_inc.h"
+
+MSCFileSystem::MSCFileSystem(const char* name) :
+ FATFileSystem(name)
+{
+}
+
+void print_inquiry(USB_INT08U *inqReply)
+{
+ // see USB Mass Storage Class � UFI Command Specification,
+ // 4.2 INQUIRY Command
+ printf("Inquiry reply:\n\r");
+ uint8_t tmp = inqReply[0]&0x1F;
+ printf("Peripheral device type: %02Xh\n\r", tmp);
+ if ( tmp == 0 )
+ printf("\t- Direct access (floppy)\n\r");
+ else if ( tmp == 0x1F )
+ printf("\t- none (no FDD connected)\n\r");
+ else
+ printf("\t- unknown type\n\r");
+ tmp = inqReply[1] >> 7;
+ printf("Removable Media Bit: %d\n\r", tmp);
+ tmp = inqReply[2] & 3;
+ printf("ANSI Version: %02Xh\n\r", tmp);
+ if ( tmp != 0 )
+ printf("\t- warning! must be 0\n\r");
+ tmp = (inqReply[2]>>3) & 3;
+ printf("ECMA Version: %02Xh\n\r", tmp);
+ if ( tmp != 0 )
+ printf("\t- warning! should be 0\n\r");
+ tmp = inqReply[2]>>6;
+ printf("ISO Version: %02Xh\n\r", tmp);
+ if ( tmp != 0 )
+ printf("\t- warning! should be 0\n\r");
+ tmp = inqReply[3] & 0xF;
+ printf("Response Data Format: %02Xh\n\r", tmp);
+ if ( tmp != 1 )
+ printf("\t- warning! should be 1\n\r");
+ tmp = inqReply[4];
+ printf("Additional length: %02Xh\n\r", tmp);
+ if ( tmp != 0x1F )
+ printf("\t- warning! should be 1Fh\n\r");
+ printf("Vendor Information: '%.8s'\n\r", &inqReply[8]);
+ printf("Product Identification: '%.16s'\n\r", &inqReply[16]);
+ printf("Product Revision: '%.4s'\n\r", &inqReply[32]);
+}
+
+int MSCFileSystem::initialise_msc()
+{
+ USB_INT32S rc;
+ USB_INT08U inquiryResult[INQUIRY_LENGTH];
+
+ //print_clock();
+ Host_Init(); /* Initialize the host controller */
+ rc = Host_EnumDev(); /* Enumerate the device connected */
+ if (rc != OK)
+ {
+ fprintf(stderr, "Could not enumerate device: %d\n\r", rc);
+ return rc;
+ }
+
+
+ /* Initialize the mass storage and scsi interfaces */
+ rc = MS_Init( &_blkSize, &_numBlks, inquiryResult );
+ if (rc != OK)
+ {
+ fprintf(stderr, "Could not initialize mass storage interface: %d\n\r", rc);
+ return rc;
+ }
+ printf("Successfully initialized mass storage interface; %d blocks of size %d\n\r", _numBlks, _blkSize);
+ print_inquiry(inquiryResult);
+ // FATFileSystem supports only 512-byte blocks
+ return _blkSize == 512 ? OK : 1;
+}
+
+int MSCFileSystem::disk_initialize()
+{
+ if ( initialise_msc() != OK )
+ return 1;
+
+ return 0;
+}
+
+int MSCFileSystem::disk_write(const char *buffer, int block_number)
+{
+ if ( OK == MS_BulkSend(block_number, 1, (USB_INT08U *)buffer) )
+ return 0;
+ return 1;
+}
+
+int MSCFileSystem::disk_read(char *buffer, int block_number)
+{
+ if ( OK == MS_BulkRecv(block_number, 1, (USB_INT08U *)buffer) )
+ return 0;
+ return 1;
+}
+
+int MSCFileSystem::disk_status() { return 0; }
+int MSCFileSystem::disk_sync() { return 0; }
+int MSCFileSystem::disk_sectors() { return _numBlks; }
diff -r 000000000000 -r e7efc8468066 MSCFileSystem/MSCFileSystem.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/MSCFileSystem/MSCFileSystem.h Fri Aug 05 15:00:51 2011 +0000
@@ -0,0 +1,49 @@
+/* USB Mass Storage device file system
+ * Copyrigh (c) 2010, Igor Skochinsky
+ * based on SDFileStorage
+ * Copyright (c) 2008-2009, sford
+ */
+
+#ifndef MSCFILESYSTEM_H
+#define MSCFILESYSTEM_H
+
+#include "mbed.h"
+#include "FATFileSystem.h"
+
+/* Class: MSCFileSystem
+ * Access the filesystem on an attached USB mass storage device (e.g. a memory stick)
+ *
+ * Example:
+ * > MSCFileSystem msc("msc");
+ * >
+ * > int main() {
+ * > FILE *fp = fopen("/msc/myfile.txt", "w");
+ * > fprintf(fp, "Hello World!\n");
+ * > fclose(fp);
+ * > }
+ */
+class MSCFileSystem : public FATFileSystem {
+public:
+
+ /* Constructor: MSCFileSystem
+ * Create the File System for accessing a USB mass storage device
+ *
+ * Parameters:
+ * name - The name used to access the filesystem
+ */
+ MSCFileSystem(const char* name);
+ virtual int disk_initialize();
+ virtual int disk_write(const char *buffer, int block_number);
+ virtual int disk_read(char *buffer, int block_number);
+ virtual int disk_status();
+ virtual int disk_sync();
+ virtual int disk_sectors();
+
+protected:
+
+ int initialise_msc();
+ uint32_t _numBlks;
+ uint32_t _blkSize;
+};
+
+#endif
diff -r 000000000000 -r e7efc8468066 SDHCFileSystem/SDHCFileSystem.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SDHCFileSystem/SDHCFileSystem.cpp Fri Aug 05 15:00:51 2011 +0000
@@ -0,0 +1,495 @@
+/* mbed SDFileSystem Library, for providing file access to SD cards
+ * Copyright (c) 2008-2010, sford
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+/* Introduction
+ * ------------
+ * SD and MMC cards support a number of interfaces, but common to them all
+ * is one based on SPI. This is the one I'm implmenting because it means
+ * it is much more portable even though not so performant, and we already
+ * have the mbed SPI Interface!
+ *
+ * The main reference I'm using is Chapter 7, "SPI Mode" of:
+ * http://www.sdcard.org/developers/tech/sdcard/pls/Simplified_Physical_Layer_Spec.pdf
+ *
+ * SPI Startup
+ * -----------
+ * The SD card powers up in SD mode. The SPI interface mode is selected by
+ * asserting CS low and sending the reset command (CMD0). The card will
+ * respond with a (R1) response.
+ *
+ * CMD8 is optionally sent to determine the voltage range supported, and
+ * indirectly determine whether it is a version 1.x SD/non-SD card or
+ * version 2.x. I'll just ignore this for now.
+ *
+ * ACMD41 is repeatedly issued to initialise the card, until "in idle"
+ * (bit 0) of the R1 response goes to '0', indicating it is initialised.
+ *
+ * You should also indicate whether the host supports High Capicity cards,
+ * and check whether the card is high capacity - i'll also ignore this
+ *
+ * SPI Protocol
+ * ------------
+ * The SD SPI protocol is based on transactions made up of 8-bit words, with
+ * the host starting every bus transaction by asserting the CS signal low. The
+ * card always responds to commands, data blocks and errors.
+ *
+ * The protocol supports a CRC, but by default it is off (except for the
+ * first reset CMD0, where the CRC can just be pre-calculated, and CMD8)
+ * I'll leave the CRC off I think!
+ *
+ * Standard capacity cards have variable data block sizes, whereas High
+ * Capacity cards fix the size of data block to 512 bytes. I'll therefore
+ * just always use the Standard Capacity cards with a block size of 512 bytes.
+ * This is set with CMD16.
+ *
+ * You can read and write single blocks (CMD17, CMD25) or multiple blocks
+ * (CMD18, CMD25). For simplicity, I'll just use single block accesses. When
+ * the card gets a read command, it responds with a response token, and then
+ * a data token or an error.
+ *
+ * SPI Command Format
+ * ------------------
+ * Commands are 6-bytes long, containing the command, 32-bit argument, and CRC.
+ *
+ * +---------------+------------+------------+-----------+----------+--------------+
+ * | 01 | cmd[5:0] | arg[31:24] | arg[23:16] | arg[15:8] | arg[7:0] | crc[6:0] | 1 |
+ * +---------------+------------+------------+-----------+----------+--------------+
+ *
+ * As I'm not using CRC, I can fix that byte to what is needed for CMD0 (0x95)
+ *
+ * All Application Specific commands shall be preceded with APP_CMD (CMD55).
+ *
+ * SPI Response Format
+ * -------------------
+ * The main response format (R1) is a status byte (normally zero). Key flags:
+ * idle - 1 if the card is in an idle state/initialising
+ * cmd - 1 if an illegal command code was detected
+ *
+ * +-------------------------------------------------+
+ * R1 | 0 | arg | addr | seq | crc | cmd | erase | idle |
+ * +-------------------------------------------------+
+ *
+ * R1b is the same, except it is followed by a busy signal (zeros) until
+ * the first non-zero byte when it is ready again.
+ *
+ * Data Response Token
+ * -------------------
+ * Every data block written to the card is acknowledged by a byte
+ * response token
+ *
+ * +----------------------+
+ * | xxx | 0 | status | 1 |
+ * +----------------------+
+ * 010 - OK!
+ * 101 - CRC Error
+ * 110 - Write Error
+ *
+ * Single Block Read and Write
+ * ---------------------------
+ *
+ * Block transfers have a byte header, followed by the data, followed
+ * by a 16-bit CRC. In our case, the data will always be 512 bytes.
+ *
+ * +------+---------+---------+- - - -+---------+-----------+----------+
+ * | 0xFE | data[0] | data[1] | | data[n] | crc[15:8] | crc[7:0] |
+ * +------+---------+---------+- - - -+---------+-----------+----------+
+ */
+
+ /*
+ * Comment: Changes for SDHC support till 32GB
+ * Name: KB
+ * Date: 07/24/2010
+ * Release: 0.1
+ */
+
+#include "SDHCFileSystem.h"
+
+#define DEBUG
+#define SD_COMMAND_TIMEOUT 5000
+
+
+SDFileSystem::SDFileSystem(PinName mosi, PinName miso, PinName sclk, PinName cs, const char* name) :
+ FATFileSystem(name), _spi(mosi, miso, sclk), _cs(cs) {
+ _cs = 1;
+}
+
+#define R1_IDLE_STATE (1 << 0)
+#define R1_ERASE_RESET (1 << 1)
+#define R1_ILLEGAL_COMMAND (1 << 2)
+#define R1_COM_CRC_ERROR (1 << 3)
+#define R1_ERASE_SEQUENCE_ERROR (1 << 4)
+#define R1_ADDRESS_ERROR (1 << 5)
+#define R1_PARAMETER_ERROR (1 << 6)
+
+// Types
+// - v1.x Standard Capacity
+// - v2.x Standard Capacity
+// - v2.x High Capacity
+// - Not recognised as an SD Card
+
+#define SDCARD_FAIL 0
+#define SDCARD_V1 1
+#define SDCARD_V2 2
+#define SDCARD_V2HC 3
+
+int SDFileSystem::initialise_card() {
+ // Set to 100kHz for initialisation, and clock card with cs = 1
+ _spi.frequency(100000);
+ _cs = 1;
+ for(int i=0; i<16; i++) {
+ _spi.write(0xFF);
+ }
+
+ // send CMD0, should return with all zeros except IDLE STATE set (bit 0)
+ if(_cmd(0, 0) != R1_IDLE_STATE) {
+ fprintf(stderr, "No disk, or could not put SD card in to SPI idle state\n");
+ return SDCARD_FAIL;
+ }
+
+ // send CMD8 to determine whther it is ver 2.x
+ int r = _cmd8();
+ if(r == R1_IDLE_STATE) {
+ return initialise_card_v2();
+ } else if(r == (R1_IDLE_STATE | R1_ILLEGAL_COMMAND)) {
+ return initialise_card_v1();
+ } else {
+ fprintf(stderr, "Not in idle state after sending CMD8 (not an SD card?)\n");
+ return SDCARD_FAIL;
+ }
+}
+
+int SDFileSystem::initialise_card_v1() {
+ for(int i=0; i<SD_COMMAND_TIMEOUT; i++) {
+ _cmd(55, 0);
+ if(_cmd(41, 0) == 0) {
+ cdv = 512;
+ #ifdef DEBUG
+ printf("\n\rInit: SEDCARD_V1\n\r");
+ #endif
+ return SDCARD_V1;
+ }
+ }
+
+ fprintf(stderr, "Timeout waiting for v1.x card\n");
+ return SDCARD_FAIL;
+}
+
+int SDFileSystem::initialise_card_v2() {
+
+ for(int i=0; i<SD_COMMAND_TIMEOUT; i++) {
+ wait_ms(50);
+ _cmd58();
+ _cmd(55, 0);
+ if(_cmd(41, 0x40000000) == 0) {
+ _cmd58();
+ #ifdef DEBUG
+ printf("\n\rInit: SDCARD_V2\n\r");
+ #endif
+ cdv = 1;
+ return SDCARD_V2;
+ }
+ }
+
+ fprintf(stderr, "Timeout waiting for v2.x card\n");
+ return SDCARD_FAIL;
+}
+
+int SDFileSystem::disk_initialize() {
+
+ int i = initialise_card();
+ #ifdef DEBUG
+ printf("init card = %d\n", i);
+ #endif
+ _sectors = _sd_sectors();
+
+ // Set block length to 512 (CMD16)
+ if(_cmd(16, 512) != 0) {
+ fprintf(stderr, "Set 512-byte block timed out\n");
+ return 1;
+ }
+
+ _spi.frequency(40000000); // Set to 40MHz for data transfer
+ return 0;
+}
+
+int SDFileSystem::disk_write(const char *buffer, int block_number) {
+ // set write address for single block (CMD24)
+ if(_cmd(24, block_number * cdv) != 0) {
+ return 1;
+ }
+
+ // send the data block
+ _write(buffer, 512);
+ return 0;
+}
+
+int SDFileSystem::disk_read(char *buffer, int block_number) {
+ // set read address for single block (CMD17)
+ if(_cmd(17, block_number * cdv) != 0) {
+ return 1;
+ }
+
+ // receive the data
+ _read(buffer, 512);
+ return 0;
+}
+
+int SDFileSystem::disk_status() { return 0; }
+int SDFileSystem::disk_sync() { return 0; }
+int SDFileSystem::disk_sectors() { return _sectors; }
+
+// PRIVATE FUNCTIONS
+
+int SDFileSystem::_cmd(int cmd, int arg) {
+ _cs = 0;
+
+ // send a command
+ _spi.write(0x40 | cmd);
+ _spi.write(arg >> 24);
+ _spi.write(arg >> 16);
+ _spi.write(arg >> 8);
+ _spi.write(arg >> 0);
+ _spi.write(0x95);
+
+ // wait for the repsonse (response[7] == 0)
+ for(int i=0; i<SD_COMMAND_TIMEOUT; i++) {
+ int response = _spi.write(0xFF);
+ if(!(response & 0x80)) {
+ _cs = 1;
+ _spi.write(0xFF);
+ return response;
+ }
+ }
+ _cs = 1;
+ _spi.write(0xFF);
+ return -1; // timeout
+}
+int SDFileSystem::_cmdx(int cmd, int arg) {
+ _cs = 0;
+
+ // send a command
+ _spi.write(0x40 | cmd);
+ _spi.write(arg >> 24);
+ _spi.write(arg >> 16);
+ _spi.write(arg >> 8);
+ _spi.write(arg >> 0);
+ _spi.write(0x95);
+
+ // wait for the repsonse (response[7] == 0)
+ for(int i=0; i<SD_COMMAND_TIMEOUT; i++) {
+ int response = _spi.write(0xFF);
+ if(!(response & 0x80)) {
+ return response;
+ }
+ }
+ _cs = 1;
+ _spi.write(0xFF);
+ return -1; // timeout
+}
+
+
+int SDFileSystem::_cmd58() {
+ _cs = 0;
+ int arg = 0;
+
+ // send a command
+ _spi.write(0x40 | 58);
+ _spi.write(arg >> 24);
+ _spi.write(arg >> 16);
+ _spi.write(arg >> 8);
+ _spi.write(arg >> 0);
+ _spi.write(0x95);
+
+ // wait for the repsonse (response[7] == 0)
+ for(int i=0; i<SD_COMMAND_TIMEOUT; i++) {
+ int response = _spi.write(0xFF);
+ if(!(response & 0x80)) {
+ int ocr = _spi.write(0xFF) << 24;
+ ocr |= _spi.write(0xFF) << 16;
+ ocr |= _spi.write(0xFF) << 8;
+ ocr |= _spi.write(0xFF) << 0;
+// printf("OCR = 0x%08X\n", ocr);
+ _cs = 1;
+ _spi.write(0xFF);
+ return response;
+ }
+ }
+ _cs = 1;
+ _spi.write(0xFF);
+ return -1; // timeout
+}
+
+int SDFileSystem::_cmd8() {
+ _cs = 0;
+
+ // send a command
+ _spi.write(0x40 | 8); // CMD8
+ _spi.write(0x00); // reserved
+ _spi.write(0x00); // reserved
+ _spi.write(0x01); // 3.3v
+ _spi.write(0xAA); // check pattern
+ _spi.write(0x87); // crc
+
+ // wait for the repsonse (response[7] == 0)
+ for(int i=0; i<SD_COMMAND_TIMEOUT * 1000; i++) {
+ char response[5];
+ response[0] = _spi.write(0xFF);
+ if(!(response[0] & 0x80)) {
+ for(int j=1; j<5; j++) {
+ response[i] = _spi.write(0xFF);
+ }
+ _cs = 1;
+ _spi.write(0xFF);
+ return response[0];
+ }
+ }
+ _cs = 1;
+ _spi.write(0xFF);
+ return -1; // timeout
+}
+
+int SDFileSystem::_read(char *buffer, int length) {
+ _cs = 0;
+
+ // read until start byte (0xFF)
+ while(_spi.write(0xFF) != 0xFE);
+
+ // read data
+ for(int i=0; i<length; i++) {
+ buffer[i] = _spi.write(0xFF);
+ }
+ _spi.write(0xFF); // checksum
+ _spi.write(0xFF);
+
+ _cs = 1;
+ _spi.write(0xFF);
+ return 0;
+}
+
+int SDFileSystem::_write(const char *buffer, int length) {
+ _cs = 0;
+
+ // indicate start of block
+ _spi.write(0xFE);
+
+ // write the data
+ for(int i=0; i<length; i++) {
+ _spi.write(buffer[i]);
+ }
+
+ // write the checksum
+ _spi.write(0xFF);
+ _spi.write(0xFF);
+
+ // check the repsonse token
+ if((_spi.write(0xFF) & 0x1F) != 0x05) {
+ _cs = 1;
+ _spi.write(0xFF);
+ return 1;
+ }
+
+ // wait for write to finish
+ while(_spi.write(0xFF) == 0);
+
+ _cs = 1;
+ _spi.write(0xFF);
+ return 0;
+}
+
+static int ext_bits(char *data, int msb, int lsb) {
+ int bits = 0;
+ int size = 1 + msb - lsb;
+ for(int i=0; i<size; i++) {
+ int position = lsb + i;
+ int byte = 15 - (position >> 3);
+ int bit = position & 0x7;
+ int value = (data[byte] >> bit) & 1;
+ bits |= value << i;
+ }
+ return bits;
+}
+
+int SDFileSystem::_sd_sectors() {
+
+ int c_size, c_size_mult, read_bl_len;
+ int block_len, mult, blocknr, capacity;
+ int blocks, hc_c_size;
+ uint64_t hc_capacity;
+
+ // CMD9, Response R2 (R1 byte + 16-byte block read)
+ if(_cmdx(9, 0) != 0) {
+ fprintf(stderr, "Didn't get a response from the disk\n");
+ return 0;
+ }
+
+ char csd[16];
+ if(_read(csd, 16) != 0) {
+ fprintf(stderr, "Couldn't read csd response from disk\n");
+ return 0;
+ }
+
+ // csd_structure : csd[127:126]
+ // c_size : csd[73:62]
+ // c_size_mult : csd[49:47]
+ // read_bl_len : csd[83:80] - the *maximum* read block length
+
+ int csd_structure = ext_bits(csd, 127, 126);
+
+ #ifdef DEBUG
+ printf("\n\rCSD_STRUCT = %d\n", csd_structure);
+ #endif
+
+ switch (csd_structure){
+ case 0:
+ cdv = 512;
+ c_size = ext_bits(csd, 73, 62);
+ c_size_mult = ext_bits(csd, 49, 47);
+ read_bl_len = ext_bits(csd, 83, 80);
+
+ block_len = 1 << read_bl_len;
+ mult = 1 << (c_size_mult + 2);
+ blocknr = (c_size + 1) * mult;
+ capacity = blocknr * block_len;
+ blocks = capacity / 512;
+ #ifdef DEBUG
+ printf("\n\rSDCard\n\rc_size: %.4X \n\rcapacity: %.ld \n\rsectors: %d\r\n", c_size, capacity, blocks);
+ #endif
+ break;
+
+ case 1:
+ cdv = 1;
+ hc_c_size = ext_bits(csd, 63, 48);
+ int hc_read_bl_len = ext_bits(csd, 83, 80);
+ hc_capacity = hc_c_size+1;
+ blocks = (hc_c_size+1)*1024;
+ #ifdef DEBUG
+ printf("\n\rSDHC Card \n\rhc_c_size: %.4X \n\rcapacity: %.lld \n\rsectors: %d\r\n", hc_c_size, hc_capacity*512*1024, blocks);
+ #endif
+ break;
+
+ default:
+ fprintf(stderr, "This disk tastes funny! I only know about type 0 CSD structures\n");
+ return 0;
+ //break;
+ };
+ return blocks;
+}
diff -r 000000000000 -r e7efc8468066 SDHCFileSystem/SDHCFileSystem.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/SDHCFileSystem/SDHCFileSystem.h Fri Aug 05 15:00:51 2011 +0000
@@ -0,0 +1,86 @@
+/* mbed SDFileSystem Library, for providing file access to SD cards
+ * Copyright (c) 2008-2010, sford
+ *
+ * Permission is hereby granted, free of charge, to any person obtaining a copy
+ * of this software and associated documentation files (the "Software"), to deal
+ * in the Software without restriction, including without limitation the rights
+ * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
+ * copies of the Software, and to permit persons to whom the Software is
+ * furnished to do so, subject to the following conditions:
+ *
+ * The above copyright notice and this permission notice shall be included in
+ * all copies or substantial portions of the Software.
+ *
+ * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+ * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+ * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
+ * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+ * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
+ * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
+ * THE SOFTWARE.
+ */
+
+#ifndef MBED_SDHCFILESYSTEM_H
+#define MBED_SDHCFILESYSTEM_H
+
+#include "mbed.h"
+#include "FATFileSystem.h"
+
+/* Double Words */
+typedef unsigned long long uint64_t;
+typedef long long sint64_t;
+
+/** Access the filesystem on an SD Card using SPI
+ *
+ * @code
+ * #include "mbed.h"
+ * #include "SDFileSystem.h"
+ *
+ * SDFileSystem sd(p5, p6, p7, p12, "sd"); // mosi, miso, sclk, cs
+ *
+ * int main() {
+ * FILE *fp = fopen("/sd/myfile.txt", "w");
+ * fprintf(fp, "Hello World!\n");
+ * fclose(fp);
+ * }
+ */
+class SDFileSystem : public FATFileSystem {
+public:
+
+ /** Create the File System for accessing an SD Card using SPI
+ *
+ * @param mosi SPI mosi pin connected to SD Card
+ * @param miso SPI miso pin conencted to SD Card
+ * @param sclk SPI sclk pin connected to SD Card
+ * @param cs DigitalOut pin used as SD Card chip select
+ * @param name The name used to access the virtual filesystem
+ */
+ SDFileSystem(PinName mosi, PinName miso, PinName sclk, PinName cs, const char* name);
+ virtual int disk_initialize();
+ virtual int disk_write(const char *buffer, int block_number);
+ virtual int disk_read(char *buffer, int block_number);
+ virtual int disk_status();
+ virtual int disk_sync();
+ virtual int disk_sectors();
+
+protected:
+
+ int _cmd(int cmd, int arg);
+ int _cmdx(int cmd, int arg);
+ int _cmd8();
+ int _cmd58();
+ int initialise_card();
+ int initialise_card_v1();
+ int initialise_card_v2();
+
+ int _read(char *buffer, int length);
+ int _write(const char *buffer, int length);
+ int _sd_sectors();
+ int _sectors;
+
+ SPI _spi;
+ DigitalOut _cs;
+ int cdv;
+};
+
+#endif
diff -r 000000000000 -r e7efc8468066 TLV320.lib --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/TLV320.lib Fri Aug 05 15:00:51 2011 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/d_worrall/code/TLV320/#7e76c6f56169
diff -r 000000000000 -r e7efc8468066 USBHostLite/usbhost_cpu.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBHostLite/usbhost_cpu.h Fri Aug 05 15:00:51 2011 +0000 @@ -0,0 +1,35 @@ +/* +************************************************************************************************************** +* NXP USB Host Stack +* +* (c) Copyright 2008, NXP SemiConductors +* (c) Copyright 2008, OnChip Technologies LLC +* All Rights Reserved +* +* www.nxp.com +* www.onchiptech.com +* +* File : usbhost_cpu.h +* Programmer(s) : Ravikanth.P +* Version : +* +************************************************************************************************************** +*/ + +#ifndef USBHOST_CPU_H +#define USBHOST_CPU_H + +/* +************************************************************************************************************** +* TYPE DEFINITIONS OF DATA TYPES +************************************************************************************************************** +*/ + +typedef unsigned int USB_INT32U; +typedef signed int USB_INT32S; +typedef unsigned short USB_INT16U; +typedef signed short USB_INT16S; +typedef unsigned char USB_INT08U; +typedef signed char USB_INT08S; + +#endif
diff -r 000000000000 -r e7efc8468066 USBHostLite/usbhost_err.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBHostLite/usbhost_err.h Fri Aug 05 15:00:51 2011 +0000 @@ -0,0 +1,63 @@ +/* +************************************************************************************************************** +* NXP USB Host Stack +* +* (c) Copyright 2008, NXP SemiConductors +* (c) Copyright 2008, OnChip Technologies LLC +* All Rights Reserved +* +* www.nxp.com +* www.onchiptech.com +* +* File : usbhost_err.h +* Programmer(s) : Ravikanth.P +* Version : +* +************************************************************************************************************** +*/ + +#ifndef USBHOST_ERR_H +#define USBHOST_ERR_H + + +/* +************************************************************************************************************** +* GENERAL DEFINITIONS +************************************************************************************************************** +*/ + +#define OK 0 +#define MATCH_FOUND 0 + +/* +************************************************************************************************************** +* HOST CONTROLLER SPECIFIC ERROR CODES +************************************************************************************************************** +*/ + +#define ERR_TD_FAIL -1 + +/* +************************************************************************************************************** +* MASS STORAGE SPECIFIC ERROR CODES +************************************************************************************************************** +*/ + +#define ERR_MS_CMD_FAILED -10 +#define ERR_BAD_CONFIGURATION -11 +#define ERR_NO_MS_INTERFACE -12 + +/* +************************************************************************************************************** +* FAT SPECIFIC ERROR CODES +************************************************************************************************************** +*/ + +#define MATCH_NOT_FOUND -20 +#define ERR_FAT_NOT_SUPPORTED -21 +#define ERR_OPEN_LIMIT_REACHED -22 +#define ERR_INVALID_BOOT_SIG -23 +#define ERR_INVALID_BOOT_SEC -24 +#define ERR_ROOT_DIR_FULL -25 + +#endif
diff -r 000000000000 -r e7efc8468066 USBHostLite/usbhost_inc.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/USBHostLite/usbhost_inc.h Fri Aug 05 15:00:51 2011 +0000 @@ -0,0 +1,39 @@ +/* +************************************************************************************************************** +* NXP USB Host Stack +* +* (c) Copyright 2008, NXP SemiConductors +* (c) Copyright 2008, OnChip Technologies LLC +* All Rights Reserved +* +* www.nxp.com +* www.onchiptech.com +* +* File : usbhost_inc.h +* Programmer(s) : Ravikanth.P +* Version : +* +************************************************************************************************************** +*/ + +#ifndef USBHOST_INC_H +#define USBHOST_INC_H + +/* +************************************************************************************************************** +* INCLUDE HEADER FILES +************************************************************************************************************** +*/ + +#include "usbhost_cpu.h" +#include "usbhost_err.h" +#include "usbhost_lpc17xx.h" +#include "usbhost_ms.h" +#include "mbed.h" + + +#ifdef TARGET_LPC2368 +#error "There is no USB host on the LPC2368!" +#endif + +#endif
diff -r 000000000000 -r e7efc8468066 USBHostLite/usbhost_lpc17xx.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBHostLite/usbhost_lpc17xx.c Fri Aug 05 15:00:51 2011 +0000
@@ -0,0 +1,820 @@
+/*
+**************************************************************************************************************
+* NXP USB Host Stack
+*
+* (c) Copyright 2008, NXP SemiConductors
+* (c) Copyright 2008, OnChip Technologies LLC
+* All Rights Reserved
+*
+* www.nxp.com
+* www.onchiptech.com
+*
+* File : usbhost_lpc17xx.c
+* Programmer(s) : Ravikanth.P
+* Version :
+*
+**************************************************************************************************************
+*/
+
+/*
+**************************************************************************************************************
+* INCLUDE HEADER FILES
+**************************************************************************************************************
+*/
+
+#include "usbhost_lpc17xx.h"
+
+/*
+**************************************************************************************************************
+* GLOBAL VARIABLES
+**************************************************************************************************************
+*/
+int gUSBConnected;
+
+volatile USB_INT32U HOST_RhscIntr = 0; /* Root Hub Status Change interrupt */
+volatile USB_INT32U HOST_WdhIntr = 0; /* Semaphore to wait until the TD is submitted */
+volatile USB_INT08U HOST_TDControlStatus = 0;
+volatile HCED *EDCtrl; /* Control endpoint descriptor structure */
+volatile HCED *EDBulkIn; /* BulkIn endpoint descriptor structure */
+volatile HCED *EDBulkOut; /* BulkOut endpoint descriptor structure */
+volatile HCTD *TDHead; /* Head transfer descriptor structure */
+volatile HCTD *TDTail; /* Tail transfer descriptor structure */
+volatile HCCA *Hcca; /* Host Controller Communications Area structure */
+ USB_INT16U *TDBufNonVol; /* Identical to TDBuffer just to reduce compiler warnings */
+volatile USB_INT08U *TDBuffer; /* Current Buffer Pointer of transfer descriptor */
+
+// USB host structures
+// AHB SRAM block 1
+#define HOSTBASEADDR 0x2007C000
+// reserve memory for the linker
+static USB_INT08U HostBuf[0x200] __attribute__((at(HOSTBASEADDR)));
+/*
+**************************************************************************************************************
+* DELAY IN MILLI SECONDS
+*
+* Description: This function provides a delay in milli seconds
+*
+* Arguments : delay The delay required
+*
+* Returns : None
+*
+**************************************************************************************************************
+*/
+
+void Host_DelayMS (USB_INT32U delay)
+{
+ volatile USB_INT32U i;
+
+
+ for (i = 0; i < delay; i++) {
+ Host_DelayUS(1000);
+ }
+}
+
+/*
+**************************************************************************************************************
+* DELAY IN MICRO SECONDS
+*
+* Description: This function provides a delay in micro seconds
+*
+* Arguments : delay The delay required
+*
+* Returns : None
+*
+**************************************************************************************************************
+*/
+
+void Host_DelayUS (USB_INT32U delay)
+{
+ volatile USB_INT32U i;
+
+
+ for (i = 0; i < (4 * delay); i++) { /* This logic was tested. It gives app. 1 micro sec delay */
+ ;
+ }
+}
+
+// bits of the USB/OTG clock control register
+#define HOST_CLK_EN (1<<0)
+#define DEV_CLK_EN (1<<1)
+#define PORTSEL_CLK_EN (1<<3)
+#define AHB_CLK_EN (1<<4)
+
+// bits of the USB/OTG clock status register
+#define HOST_CLK_ON (1<<0)
+#define DEV_CLK_ON (1<<1)
+#define PORTSEL_CLK_ON (1<<3)
+#define AHB_CLK_ON (1<<4)
+
+// we need host clock, OTG/portsel clock and AHB clock
+#define CLOCK_MASK (HOST_CLK_EN | PORTSEL_CLK_EN | AHB_CLK_EN)
+
+/*
+**************************************************************************************************************
+* INITIALIZE THE HOST CONTROLLER
+*
+* Description: This function initializes lpc17xx host controller
+*
+* Arguments : None
+*
+* Returns :
+*
+**************************************************************************************************************
+*/
+void Host_Init (void)
+{
+ PRINT_Log("In Host_Init\n");
+ NVIC_DisableIRQ(USB_IRQn); /* Disable the USB interrupt source */
+
+ // turn on power for USB
+ LPC_SC->PCONP |= (1UL<<31);
+ // Enable USB host clock, port selection and AHB clock
+ LPC_USB->USBClkCtrl |= CLOCK_MASK;
+ // Wait for clocks to become available
+ while ((LPC_USB->USBClkSt & CLOCK_MASK) != CLOCK_MASK)
+ ;
+
+ // it seems the bits[0:1] mean the following
+ // 0: U1=device, U2=host
+ // 1: U1=host, U2=host
+ // 2: reserved
+ // 3: U1=host, U2=device
+ // NB: this register is only available if OTG clock (aka "port select") is enabled!!
+ // since we don't care about port 2, set just bit 0 to 1 (U1=host)
+ LPC_USB->OTGStCtrl |= 1;
+
+ // now that we've configured the ports, we can turn off the portsel clock
+ LPC_USB->USBClkCtrl &= ~PORTSEL_CLK_EN;
+
+ // power pins are not connected on mbed, so we can skip them
+ /* P1[18] = USB_UP_LED, 01 */
+ /* P1[19] = /USB_PPWR, 10 */
+ /* P1[22] = USB_PWRD, 10 */
+ /* P1[27] = /USB_OVRCR, 10 */
+ /*LPC_PINCON->PINSEL3 &= ~((3<<4) | (3<<6) | (3<<12) | (3<<22));
+ LPC_PINCON->PINSEL3 |= ((1<<4)|(2<<6) | (2<<12) | (2<<22)); // 0x00802080
+ */
+
+ // configure USB D+/D- pins
+ /* P0[29] = USB_D+, 01 */
+ /* P0[30] = USB_D-, 01 */
+ LPC_PINCON->PINSEL1 &= ~((3<<26) | (3<<28));
+ LPC_PINCON->PINSEL1 |= ((1<<26)|(1<<28)); // 0x14000000
+
+ PRINT_Log("Initializing Host Stack\n");
+
+ Hcca = (volatile HCCA *)(HostBuf+0x000);
+ TDHead = (volatile HCTD *)(HostBuf+0x100);
+ TDTail = (volatile HCTD *)(HostBuf+0x110);
+ EDCtrl = (volatile HCED *)(HostBuf+0x120);
+ EDBulkIn = (volatile HCED *)(HostBuf+0x130);
+ EDBulkOut = (volatile HCED *)(HostBuf+0x140);
+ TDBuffer = (volatile USB_INT08U *)(HostBuf+0x150);
+
+ /* Initialize all the TDs, EDs and HCCA to 0 */
+ Host_EDInit(EDCtrl);
+ Host_EDInit(EDBulkIn);
+ Host_EDInit(EDBulkOut);
+ Host_TDInit(TDHead);
+ Host_TDInit(TDTail);
+ Host_HCCAInit(Hcca);
+
+ Host_DelayMS(50); /* Wait 50 ms before apply reset */
+ LPC_USB->HcControl = 0; /* HARDWARE RESET */
+ LPC_USB->HcControlHeadED = 0; /* Initialize Control list head to Zero */
+ LPC_USB->HcBulkHeadED = 0; /* Initialize Bulk list head to Zero */
+
+ /* SOFTWARE RESET */
+ LPC_USB->HcCommandStatus = OR_CMD_STATUS_HCR;
+ LPC_USB->HcFmInterval = DEFAULT_FMINTERVAL; /* Write Fm Interval and Largest Data Packet Counter */
+
+ /* Put HC in operational state */
+ LPC_USB->HcControl = (LPC_USB->HcControl & (~OR_CONTROL_HCFS)) | OR_CONTROL_HC_OPER;
+ LPC_USB->HcRhStatus = OR_RH_STATUS_LPSC; /* Set Global Power */
+
+ LPC_USB->HcHCCA = (USB_INT32U)Hcca;
+ LPC_USB->HcInterruptStatus |= LPC_USB->HcInterruptStatus; /* Clear Interrrupt Status */
+
+
+ LPC_USB->HcInterruptEnable = OR_INTR_ENABLE_MIE |
+ OR_INTR_ENABLE_WDH |
+ OR_INTR_ENABLE_RHSC;
+
+ NVIC_SetPriority(USB_IRQn, 0); /* highest priority */
+ /* Enable the USB Interrupt */
+ NVIC_EnableIRQ(USB_IRQn);
+ PRINT_Log("Host Initialized\n");
+}
+
+/*
+**************************************************************************************************************
+* INTERRUPT SERVICE ROUTINE
+*
+* Description: This function services the interrupt caused by host controller
+*
+* Arguments : None
+*
+* Returns : None
+*
+**************************************************************************************************************
+*/
+
+void USB_IRQHandler (void) __irq
+{
+ USB_INT32U int_status;
+ USB_INT32U ie_status;
+
+ int_status = LPC_USB->HcInterruptStatus; /* Read Interrupt Status */
+ ie_status = LPC_USB->HcInterruptEnable; /* Read Interrupt enable status */
+
+ if (!(int_status & ie_status)) {
+ return;
+ } else {
+
+ int_status = int_status & ie_status;
+ if (int_status & OR_INTR_STATUS_RHSC) { /* Root hub status change interrupt */
+ if (LPC_USB->HcRhPortStatus1 & OR_RH_PORT_CSC) {
+ if (LPC_USB->HcRhStatus & OR_RH_STATUS_DRWE) {
+ /*
+ * When DRWE is on, Connect Status Change
+ * means a remote wakeup event.
+ */
+ HOST_RhscIntr = 1;// JUST SOMETHING FOR A BREAKPOINT
+ }
+ else {
+ /*
+ * When DRWE is off, Connect Status Change
+ * is NOT a remote wakeup event
+ */
+ if (LPC_USB->HcRhPortStatus1 & OR_RH_PORT_CCS) {
+ if (!gUSBConnected) {
+ HOST_TDControlStatus = 0;
+ HOST_WdhIntr = 0;
+ HOST_RhscIntr = 1;
+ gUSBConnected = 1;
+ }
+ else
+ PRINT_Log("Spurious status change (connected)?\n");
+ } else {
+ if (gUSBConnected) {
+ LPC_USB->HcInterruptEnable = 0; // why do we get multiple disc. rupts???
+ HOST_RhscIntr = 0;
+ gUSBConnected = 0;
+ }
+ else
+ PRINT_Log("Spurious status change (disconnected)?\n");
+ }
+ }
+ LPC_USB->HcRhPortStatus1 = OR_RH_PORT_CSC;
+ }
+ if (LPC_USB->HcRhPortStatus1 & OR_RH_PORT_PRSC) {
+ LPC_USB->HcRhPortStatus1 = OR_RH_PORT_PRSC;
+ }
+ }
+ if (int_status & OR_INTR_STATUS_WDH) { /* Writeback Done Head interrupt */
+ HOST_WdhIntr = 1;
+ HOST_TDControlStatus = (TDHead->Control >> 28) & 0xf;
+ }
+ LPC_USB->HcInterruptStatus = int_status; /* Clear interrupt status register */
+ }
+ return;
+}
+
+/*
+**************************************************************************************************************
+* PROCESS TRANSFER DESCRIPTOR
+*
+* Description: This function processes the transfer descriptor
+*
+* Arguments : ed Endpoint descriptor that contains this transfer descriptor
+* token SETUP, IN, OUT
+* buffer Current Buffer Pointer of the transfer descriptor
+* buffer_len Length of the buffer
+*
+* Returns : OK if TD submission is successful
+* ERROR if TD submission fails
+*
+**************************************************************************************************************
+*/
+
+USB_INT32S Host_ProcessTD (volatile HCED *ed,
+ volatile USB_INT32U token,
+ volatile USB_INT08U *buffer,
+ USB_INT32U buffer_len)
+{
+ volatile USB_INT32U td_toggle;
+
+
+ if (ed == EDCtrl) {
+ if (token == TD_SETUP) {
+ td_toggle = TD_TOGGLE_0;
+ } else {
+ td_toggle = TD_TOGGLE_1;
+ }
+ } else {
+ td_toggle = 0;
+ }
+ TDHead->Control = (TD_ROUNDING |
+ token |
+ TD_DELAY_INT(0) |
+ td_toggle |
+ TD_CC);
+ TDTail->Control = 0;
+ TDHead->CurrBufPtr = (USB_INT32U) buffer;
+ TDTail->CurrBufPtr = 0;
+ TDHead->Next = (USB_INT32U) TDTail;
+ TDTail->Next = 0;
+ TDHead->BufEnd = (USB_INT32U)(buffer + (buffer_len - 1));
+ TDTail->BufEnd = 0;
+
+ ed->HeadTd = (USB_INT32U)TDHead | ((ed->HeadTd) & 0x00000002);
+ ed->TailTd = (USB_INT32U)TDTail;
+ ed->Next = 0;
+
+ if (ed == EDCtrl) {
+ LPC_USB->HcControlHeadED = (USB_INT32U)ed;
+ LPC_USB->HcCommandStatus = LPC_USB->HcCommandStatus | OR_CMD_STATUS_CLF;
+ LPC_USB->HcControl = LPC_USB->HcControl | OR_CONTROL_CLE;
+ } else {
+ LPC_USB->HcBulkHeadED = (USB_INT32U)ed;
+ LPC_USB->HcCommandStatus = LPC_USB->HcCommandStatus | OR_CMD_STATUS_BLF;
+ LPC_USB->HcControl = LPC_USB->HcControl | OR_CONTROL_BLE;
+ }
+
+ Host_WDHWait();
+
+// if (!(TDHead->Control & 0xF0000000)) {
+ if (!HOST_TDControlStatus) {
+ return (OK);
+ } else {
+ return (ERR_TD_FAIL);
+ }
+}
+
+/*
+**************************************************************************************************************
+* ENUMERATE THE DEVICE
+*
+* Description: This function is used to enumerate the device connected
+*
+* Arguments : None
+*
+* Returns : None
+*
+**************************************************************************************************************
+*/
+
+USB_INT32S Host_EnumDev (void)
+{
+ USB_INT32S rc;
+
+ PRINT_Log("Connect a Mass Storage device\n");
+ while (!HOST_RhscIntr)
+ __WFI();
+ Host_DelayMS(100); /* USB 2.0 spec says atleast 50ms delay beore port reset */
+ LPC_USB->HcRhPortStatus1 = OR_RH_PORT_PRS; // Initiate port reset
+ while (LPC_USB->HcRhPortStatus1 & OR_RH_PORT_PRS)
+ __WFI(); // Wait for port reset to complete...
+ LPC_USB->HcRhPortStatus1 = OR_RH_PORT_PRSC; // ...and clear port reset signal
+ Host_DelayMS(200); /* Wait for 100 MS after port reset */
+
+ EDCtrl->Control = 8 << 16; /* Put max pkt size = 8 */
+ /* Read first 8 bytes of device desc */
+ rc = HOST_GET_DESCRIPTOR(USB_DESCRIPTOR_TYPE_DEVICE, 0, TDBuffer, 8);
+ if (rc != OK) {
+ PRINT_Err(rc);
+ return (rc);
+ }
+ EDCtrl->Control = TDBuffer[7] << 16; /* Get max pkt size of endpoint 0 */
+ rc = HOST_SET_ADDRESS(1); /* Set the device address to 1 */
+ if (rc != OK) {
+ PRINT_Err(rc);
+ return (rc);
+ }
+ Host_DelayMS(2);
+ EDCtrl->Control = (EDCtrl->Control) | 1; /* Modify control pipe with address 1 */
+ /* Get the configuration descriptor */
+ rc = HOST_GET_DESCRIPTOR(USB_DESCRIPTOR_TYPE_CONFIGURATION, 0, TDBuffer, 9);
+ if (rc != OK) {
+ PRINT_Err(rc);
+ return (rc);
+ }
+ /* Get the first configuration data */
+ rc = HOST_GET_DESCRIPTOR(USB_DESCRIPTOR_TYPE_CONFIGURATION, 0, TDBuffer, ReadLE16U(&TDBuffer[2]));
+ if (rc != OK) {
+ PRINT_Err(rc);
+ return (rc);
+ }
+ rc = MS_ParseConfiguration(); /* Parse the configuration */
+ if (rc != OK) {
+ PRINT_Err(rc);
+ return (rc);
+ }
+ rc = USBH_SET_CONFIGURATION(1); /* Select device configuration 1 */
+ if (rc != OK) {
+ PRINT_Err(rc);
+ }
+ Host_DelayMS(100); /* Some devices may require this delay */
+ return (rc);
+}
+
+/*
+**************************************************************************************************************
+* RECEIVE THE CONTROL INFORMATION
+*
+* Description: This function is used to receive the control information
+*
+* Arguments : bm_request_type
+* b_request
+* w_value
+* w_index
+* w_length
+* buffer
+*
+* Returns : OK if Success
+* ERROR if Failed
+*
+**************************************************************************************************************
+*/
+
+USB_INT32S Host_CtrlRecv ( USB_INT08U bm_request_type,
+ USB_INT08U b_request,
+ USB_INT16U w_value,
+ USB_INT16U w_index,
+ USB_INT16U w_length,
+ volatile USB_INT08U *buffer)
+{
+ USB_INT32S rc;
+
+
+ Host_FillSetup(bm_request_type, b_request, w_value, w_index, w_length);
+ rc = Host_ProcessTD(EDCtrl, TD_SETUP, TDBuffer, 8);
+ if (rc == OK) {
+ if (w_length) {
+ rc = Host_ProcessTD(EDCtrl, TD_IN, TDBuffer, w_length);
+ }
+ if (rc == OK) {
+ rc = Host_ProcessTD(EDCtrl, TD_OUT, NULL, 0);
+ }
+ }
+ return (rc);
+}
+
+/*
+**************************************************************************************************************
+* SEND THE CONTROL INFORMATION
+*
+* Description: This function is used to send the control information
+*
+* Arguments : None
+*
+* Returns : OK if Success
+* ERR_INVALID_BOOTSIG if Failed
+*
+**************************************************************************************************************
+*/
+
+USB_INT32S Host_CtrlSend ( USB_INT08U bm_request_type,
+ USB_INT08U b_request,
+ USB_INT16U w_value,
+ USB_INT16U w_index,
+ USB_INT16U w_length,
+ volatile USB_INT08U *buffer)
+{
+ USB_INT32S rc;
+
+
+ Host_FillSetup(bm_request_type, b_request, w_value, w_index, w_length);
+
+ rc = Host_ProcessTD(EDCtrl, TD_SETUP, TDBuffer, 8);
+ if (rc == OK) {
+ if (w_length) {
+ rc = Host_ProcessTD(EDCtrl, TD_OUT, TDBuffer, w_length);
+ }
+ if (rc == OK) {
+ rc = Host_ProcessTD(EDCtrl, TD_IN, NULL, 0);
+ }
+ }
+ return (rc);
+}
+
+/*
+**************************************************************************************************************
+* FILL SETUP PACKET
+*
+* Description: This function is used to fill the setup packet
+*
+* Arguments : None
+*
+* Returns : OK if Success
+* ERR_INVALID_BOOTSIG if Failed
+*
+**************************************************************************************************************
+*/
+
+void Host_FillSetup (USB_INT08U bm_request_type,
+ USB_INT08U b_request,
+ USB_INT16U w_value,
+ USB_INT16U w_index,
+ USB_INT16U w_length)
+{
+ int i;
+ for (i=0;i<w_length;i++)
+ TDBuffer[i] = 0;
+
+ TDBuffer[0] = bm_request_type;
+ TDBuffer[1] = b_request;
+ WriteLE16U(&TDBuffer[2], w_value);
+ WriteLE16U(&TDBuffer[4], w_index);
+ WriteLE16U(&TDBuffer[6], w_length);
+}
+
+
+
+/*
+**************************************************************************************************************
+* INITIALIZE THE TRANSFER DESCRIPTOR
+*
+* Description: This function initializes transfer descriptor
+*
+* Arguments : Pointer to TD structure
+*
+* Returns : None
+*
+**************************************************************************************************************
+*/
+
+void Host_TDInit (volatile HCTD *td)
+{
+
+ td->Control = 0;
+ td->CurrBufPtr = 0;
+ td->Next = 0;
+ td->BufEnd = 0;
+}
+
+/*
+**************************************************************************************************************
+* INITIALIZE THE ENDPOINT DESCRIPTOR
+*
+* Description: This function initializes endpoint descriptor
+*
+* Arguments : Pointer to ED strcuture
+*
+* Returns : None
+*
+**************************************************************************************************************
+*/
+
+void Host_EDInit (volatile HCED *ed)
+{
+
+ ed->Control = 0;
+ ed->TailTd = 0;
+ ed->HeadTd = 0;
+ ed->Next = 0;
+}
+
+/*
+**************************************************************************************************************
+* INITIALIZE HOST CONTROLLER COMMUNICATIONS AREA
+*
+* Description: This function initializes host controller communications area
+*
+* Arguments : Pointer to HCCA
+*
+* Returns :
+*
+**************************************************************************************************************
+*/
+
+void Host_HCCAInit (volatile HCCA *hcca)
+{
+ USB_INT32U i;
+
+
+ for (i = 0; i < 32; i++) {
+
+ hcca->IntTable[i] = 0;
+ hcca->FrameNumber = 0;
+ hcca->DoneHead = 0;
+ }
+
+}
+
+/*
+**************************************************************************************************************
+* WAIT FOR WDH INTERRUPT
+*
+* Description: This function is infinite loop which breaks when ever a WDH interrupt rises
+*
+* Arguments : None
+*
+* Returns : None
+*
+**************************************************************************************************************
+*/
+
+void Host_WDHWait (void)
+{
+ while (!HOST_WdhIntr)
+ __WFI();
+
+ HOST_WdhIntr = 0;
+}
+
+/*
+**************************************************************************************************************
+* READ LE 32U
+*
+* Description: This function is used to read an unsigned integer from a character buffer in the platform
+* containing little endian processor
+*
+* Arguments : pmem Pointer to the character buffer
+*
+* Returns : val Unsigned integer
+*
+**************************************************************************************************************
+*/
+
+USB_INT32U ReadLE32U (volatile USB_INT08U *pmem)
+{
+ USB_INT32U val = *(USB_INT32U*)pmem;
+#ifdef __BIG_ENDIAN
+ return __REV(val);
+#else
+ return val;
+#endif
+}
+
+/*
+**************************************************************************************************************
+* WRITE LE 32U
+*
+* Description: This function is used to write an unsigned integer into a charecter buffer in the platform
+* containing little endian processor.
+*
+* Arguments : pmem Pointer to the charecter buffer
+* val Integer value to be placed in the charecter buffer
+*
+* Returns : None
+*
+**************************************************************************************************************
+*/
+
+void WriteLE32U (volatile USB_INT08U *pmem,
+ USB_INT32U val)
+{
+#ifdef __BIG_ENDIAN
+ *(USB_INT32U*)pmem = __REV(val);
+#else
+ *(USB_INT32U*)pmem = val;
+#endif
+}
+
+/*
+**************************************************************************************************************
+* READ LE 16U
+*
+* Description: This function is used to read an unsigned short integer from a charecter buffer in the platform
+* containing little endian processor
+*
+* Arguments : pmem Pointer to the charecter buffer
+*
+* Returns : val Unsigned short integer
+*
+**************************************************************************************************************
+*/
+
+USB_INT16U ReadLE16U (volatile USB_INT08U *pmem)
+{
+ USB_INT16U val = *(USB_INT16U*)pmem;
+#ifdef __BIG_ENDIAN
+ return __REV16(val);
+#else
+ return val;
+#endif
+}
+
+/*
+**************************************************************************************************************
+* WRITE LE 16U
+*
+* Description: This function is used to write an unsigned short integer into a charecter buffer in the
+* platform containing little endian processor
+*
+* Arguments : pmem Pointer to the charecter buffer
+* val Value to be placed in the charecter buffer
+*
+* Returns : None
+*
+**************************************************************************************************************
+*/
+
+void WriteLE16U (volatile USB_INT08U *pmem,
+ USB_INT16U val)
+{
+#ifdef __BIG_ENDIAN
+ *(USB_INT16U*)pmem = (__REV16(val) & 0xFFFF);
+#else
+ *(USB_INT16U*)pmem = val;
+#endif
+}
+
+/*
+**************************************************************************************************************
+* READ BE 32U
+*
+* Description: This function is used to read an unsigned integer from a charecter buffer in the platform
+* containing big endian processor
+*
+* Arguments : pmem Pointer to the charecter buffer
+*
+* Returns : val Unsigned integer
+*
+**************************************************************************************************************
+*/
+
+USB_INT32U ReadBE32U (volatile USB_INT08U *pmem)
+{
+ USB_INT32U val = *(USB_INT32U*)pmem;
+#ifdef __BIG_ENDIAN
+ return val;
+#else
+ return __REV(val);
+#endif
+}
+
+/*
+**************************************************************************************************************
+* WRITE BE 32U
+*
+* Description: This function is used to write an unsigned integer into a charecter buffer in the platform
+* containing big endian processor
+*
+* Arguments : pmem Pointer to the charecter buffer
+* val Value to be placed in the charecter buffer
+*
+* Returns : None
+*
+**************************************************************************************************************
+*/
+
+void WriteBE32U (volatile USB_INT08U *pmem,
+ USB_INT32U val)
+{
+#ifdef __BIG_ENDIAN
+ *(USB_INT32U*)pmem = val;
+#else
+ *(USB_INT32U*)pmem = __REV(val);
+#endif
+}
+
+/*
+**************************************************************************************************************
+* READ BE 16U
+*
+* Description: This function is used to read an unsigned short integer from a charecter buffer in the platform
+* containing big endian processor
+*
+* Arguments : pmem Pointer to the charecter buffer
+*
+* Returns : val Unsigned short integer
+*
+**************************************************************************************************************
+*/
+
+USB_INT16U ReadBE16U (volatile USB_INT08U *pmem)
+{
+ USB_INT16U val = *(USB_INT16U*)pmem;
+#ifdef __BIG_ENDIAN
+ return val;
+#else
+ return __REV16(val);
+#endif
+}
+
+/*
+**************************************************************************************************************
+* WRITE BE 16U
+*
+* Description: This function is used to write an unsigned short integer into the charecter buffer in the
+* platform containing big endian processor
+*
+* Arguments : pmem Pointer to the charecter buffer
+* val Value to be placed in the charecter buffer
+*
+* Returns : None
+*
+**************************************************************************************************************
+*/
+
+void WriteBE16U (volatile USB_INT08U *pmem,
+ USB_INT16U val)
+{
+#ifdef __BIG_ENDIAN
+ *(USB_INT16U*)pmem = val;
+#else
+ *(USB_INT16U*)pmem = (__REV16(val) & 0xFFFF);
+#endif
+}
diff -r 000000000000 -r e7efc8468066 USBHostLite/usbhost_lpc17xx.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBHostLite/usbhost_lpc17xx.h Fri Aug 05 15:00:51 2011 +0000
@@ -0,0 +1,254 @@
+/*
+**************************************************************************************************************
+* NXP USB Host Stack
+*
+* (c) Copyright 2008, NXP SemiConductors
+* (c) Copyright 2008, OnChip Technologies LLC
+* All Rights Reserved
+*
+* www.nxp.com
+* www.onchiptech.com
+*
+* File : usbhost_lpc17xx.h
+* Programmer(s) : Ravikanth.P
+* Version :
+*
+**************************************************************************************************************
+*/
+
+#ifndef USBHOST_LPC17xx_H
+#define USBHOST_LPC17xx_H
+
+/*
+**************************************************************************************************************
+* INCLUDE HEADER FILES
+**************************************************************************************************************
+*/
+
+#include "usbhost_inc.h"
+
+/*
+**************************************************************************************************************
+* PRINT CONFIGURATION
+**************************************************************************************************************
+*/
+
+#define PRINT_ENABLE 1
+
+#if PRINT_ENABLE
+#define PRINT_Log(...) printf(__VA_ARGS__)
+#define PRINT_Err(rc) printf("ERROR: In %s at Line %u - rc = %d\n", __FUNCTION__, __LINE__, rc)
+
+#else
+#define PRINT_Log(...) do {} while(0)
+#define PRINT_Err(rc) do {} while(0)
+
+#endif
+
+/*
+**************************************************************************************************************
+* GENERAL DEFINITIONS
+**************************************************************************************************************
+*/
+
+#define DESC_LENGTH(x) x[0]
+#define DESC_TYPE(x) x[1]
+
+
+#define HOST_GET_DESCRIPTOR(descType, descIndex, data, length) \
+ Host_CtrlRecv(USB_DEVICE_TO_HOST | USB_RECIPIENT_DEVICE, GET_DESCRIPTOR, \
+ (descType << 8)|(descIndex), 0, length, data)
+
+#define HOST_SET_ADDRESS(new_addr) \
+ Host_CtrlSend(USB_HOST_TO_DEVICE | USB_RECIPIENT_DEVICE, SET_ADDRESS, \
+ new_addr, 0, 0, NULL)
+
+#define USBH_SET_CONFIGURATION(configNum) \
+ Host_CtrlSend(USB_HOST_TO_DEVICE | USB_RECIPIENT_DEVICE, SET_CONFIGURATION, \
+ configNum, 0, 0, NULL)
+
+#define USBH_SET_INTERFACE(ifNum, altNum) \
+ Host_CtrlSend(USB_HOST_TO_DEVICE | USB_RECIPIENT_INTERFACE, SET_INTERFACE, \
+ altNum, ifNum, 0, NULL)
+
+/*
+**************************************************************************************************************
+* OHCI OPERATIONAL REGISTER FIELD DEFINITIONS
+**************************************************************************************************************
+*/
+
+ /* ------------------ HcControl Register --------------------- */
+#define OR_CONTROL_CLE 0x00000010
+#define OR_CONTROL_BLE 0x00000020
+#define OR_CONTROL_HCFS 0x000000C0
+#define OR_CONTROL_HC_OPER 0x00000080
+ /* ----------------- HcCommandStatus Register ----------------- */
+#define OR_CMD_STATUS_HCR 0x00000001
+#define OR_CMD_STATUS_CLF 0x00000002
+#define OR_CMD_STATUS_BLF 0x00000004
+ /* --------------- HcInterruptStatus Register ----------------- */
+#define OR_INTR_STATUS_WDH 0x00000002
+#define OR_INTR_STATUS_RHSC 0x00000040
+ /* --------------- HcInterruptEnable Register ----------------- */
+#define OR_INTR_ENABLE_WDH 0x00000002
+#define OR_INTR_ENABLE_RHSC 0x00000040
+#define OR_INTR_ENABLE_MIE 0x80000000
+ /* ---------------- HcRhDescriptorA Register ------------------ */
+#define OR_RH_STATUS_LPSC 0x00010000
+#define OR_RH_STATUS_DRWE 0x00008000
+ /* -------------- HcRhPortStatus[1:NDP] Register -------------- */
+#define OR_RH_PORT_CCS 0x00000001
+#define OR_RH_PORT_PRS 0x00000010
+#define OR_RH_PORT_CSC 0x00010000
+#define OR_RH_PORT_PRSC 0x00100000
+
+
+/*
+**************************************************************************************************************
+* FRAME INTERVAL
+**************************************************************************************************************
+*/
+
+#define FI 0x2EDF /* 12000 bits per frame (-1) */
+#define DEFAULT_FMINTERVAL ((((6 * (FI - 210)) / 7) << 16) | FI)
+
+/*
+**************************************************************************************************************
+* TRANSFER DESCRIPTOR CONTROL FIELDS
+**************************************************************************************************************
+*/
+
+#define TD_ROUNDING (USB_INT32U) (0x00040000) /* Buffer Rounding */
+#define TD_SETUP (USB_INT32U)(0) /* Direction of Setup Packet */
+#define TD_IN (USB_INT32U)(0x00100000) /* Direction In */
+#define TD_OUT (USB_INT32U)(0x00080000) /* Direction Out */
+#define TD_DELAY_INT(x) (USB_INT32U)((x) << 21) /* Delay Interrupt */
+#define TD_TOGGLE_0 (USB_INT32U)(0x02000000) /* Toggle 0 */
+#define TD_TOGGLE_1 (USB_INT32U)(0x03000000) /* Toggle 1 */
+#define TD_CC (USB_INT32U)(0xF0000000) /* Completion Code */
+
+/*
+**************************************************************************************************************
+* USB STANDARD REQUEST DEFINITIONS
+**************************************************************************************************************
+*/
+
+#define USB_DESCRIPTOR_TYPE_DEVICE 1
+#define USB_DESCRIPTOR_TYPE_CONFIGURATION 2
+#define USB_DESCRIPTOR_TYPE_INTERFACE 4
+#define USB_DESCRIPTOR_TYPE_ENDPOINT 5
+ /* ----------- Control RequestType Fields ----------- */
+#define USB_DEVICE_TO_HOST 0x80
+#define USB_HOST_TO_DEVICE 0x00
+#define USB_REQUEST_TYPE_CLASS 0x20
+#define USB_RECIPIENT_DEVICE 0x00
+#define USB_RECIPIENT_INTERFACE 0x01
+ /* -------------- USB Standard Requests -------------- */
+#define SET_ADDRESS 5
+#define GET_DESCRIPTOR 6
+#define SET_CONFIGURATION 9
+#define SET_INTERFACE 11
+
+/*
+**************************************************************************************************************
+* TYPE DEFINITIONS
+**************************************************************************************************************
+*/
+
+typedef struct hcEd { /* ----------- HostController EndPoint Descriptor ------------- */
+ volatile USB_INT32U Control; /* Endpoint descriptor control */
+ volatile USB_INT32U TailTd; /* Physical address of tail in Transfer descriptor list */
+ volatile USB_INT32U HeadTd; /* Physcial address of head in Transfer descriptor list */
+ volatile USB_INT32U Next; /* Physical address of next Endpoint descriptor */
+} HCED;
+
+typedef struct hcTd { /* ------------ HostController Transfer Descriptor ------------ */
+ volatile USB_INT32U Control; /* Transfer descriptor control */
+ volatile USB_INT32U CurrBufPtr; /* Physical address of current buffer pointer */
+ volatile USB_INT32U Next; /* Physical pointer to next Transfer Descriptor */
+ volatile USB_INT32U BufEnd; /* Physical address of end of buffer */
+} HCTD;
+
+typedef struct hcca { /* ----------- Host Controller Communication Area ------------ */
+ volatile USB_INT32U IntTable[32]; /* Interrupt Table */
+ volatile USB_INT32U FrameNumber; /* Frame Number */
+ volatile USB_INT32U DoneHead; /* Done Head */
+ volatile USB_INT08U Reserved[116]; /* Reserved for future use */
+ volatile USB_INT08U Unknown[4]; /* Unused */
+} HCCA;
+
+/*
+**************************************************************************************************************
+* EXTERN DECLARATIONS
+**************************************************************************************************************
+*/
+
+extern volatile HCED *EDBulkIn; /* BulkIn endpoint descriptor structure */
+extern volatile HCED *EDBulkOut; /* BulkOut endpoint descriptor structure */
+extern volatile HCTD *TDHead; /* Head transfer descriptor structure */
+extern volatile HCTD *TDTail; /* Tail transfer descriptor structure */
+extern volatile USB_INT08U *TDBuffer; /* Current Buffer Pointer of transfer descriptor */
+
+/*
+**************************************************************************************************************
+* FUNCTION PROTOTYPES
+**************************************************************************************************************
+*/
+
+void Host_Init (void);
+
+extern "C" void USB_IRQHandler(void) __irq;
+
+USB_INT32S Host_EnumDev (void);
+
+USB_INT32S Host_ProcessTD(volatile HCED *ed,
+ volatile USB_INT32U token,
+ volatile USB_INT08U *buffer,
+ USB_INT32U buffer_len);
+
+void Host_DelayUS ( USB_INT32U delay);
+void Host_DelayMS ( USB_INT32U delay);
+
+
+void Host_TDInit (volatile HCTD *td);
+void Host_EDInit (volatile HCED *ed);
+void Host_HCCAInit (volatile HCCA *hcca);
+
+USB_INT32S Host_CtrlRecv ( USB_INT08U bm_request_type,
+ USB_INT08U b_request,
+ USB_INT16U w_value,
+ USB_INT16U w_index,
+ USB_INT16U w_length,
+ volatile USB_INT08U *buffer);
+
+USB_INT32S Host_CtrlSend ( USB_INT08U bm_request_type,
+ USB_INT08U b_request,
+ USB_INT16U w_value,
+ USB_INT16U w_index,
+ USB_INT16U w_length,
+ volatile USB_INT08U *buffer);
+
+void Host_FillSetup( USB_INT08U bm_request_type,
+ USB_INT08U b_request,
+ USB_INT16U w_value,
+ USB_INT16U w_index,
+ USB_INT16U w_length);
+
+
+void Host_WDHWait (void);
+
+
+USB_INT32U ReadLE32U (volatile USB_INT08U *pmem);
+void WriteLE32U (volatile USB_INT08U *pmem,
+ USB_INT32U val);
+USB_INT16U ReadLE16U (volatile USB_INT08U *pmem);
+void WriteLE16U (volatile USB_INT08U *pmem,
+ USB_INT16U val);
+USB_INT32U ReadBE32U (volatile USB_INT08U *pmem);
+void WriteBE32U (volatile USB_INT08U *pmem,
+ USB_INT32U val);
+USB_INT16U ReadBE16U (volatile USB_INT08U *pmem);
+void WriteBE16U (volatile USB_INT08U *pmem,
+ USB_INT16U val);
+
+#endif
diff -r 000000000000 -r e7efc8468066 USBHostLite/usbhost_ms.c
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBHostLite/usbhost_ms.c Fri Aug 05 15:00:51 2011 +0000
@@ -0,0 +1,455 @@
+/*
+**************************************************************************************************************
+* NXP USB Host Stack
+*
+* (c) Copyright 2008, NXP SemiConductors
+* (c) Copyright 2008, OnChip Technologies LLC
+* All Rights Reserved
+*
+* www.nxp.com
+* www.onchiptech.com
+*
+* File : usbhost_ms.c
+* Programmer(s) : Ravikanth.P
+* Version :
+*
+**************************************************************************************************************
+*/
+
+/*
+**************************************************************************************************************
+* INCLUDE HEADER FILES
+**************************************************************************************************************
+*/
+
+#include "usbhost_ms.h"
+
+/*
+**************************************************************************************************************
+* GLOBAL VARIABLES
+**************************************************************************************************************
+*/
+
+USB_INT32U MS_BlkSize;
+
+/*
+**************************************************************************************************************
+* INITIALIZE MASS STORAGE INTERFACE
+*
+* Description: This function initializes the mass storage interface
+*
+* Arguments : None
+*
+* Returns : OK if Success
+* ERR_INVALID_BOOTSIG if Failed
+*
+**************************************************************************************************************
+*/
+
+USB_INT32S MS_Init (USB_INT32U *blkSize, USB_INT32U *numBlks, USB_INT08U *inquiryResult)
+{
+ USB_INT08U retry;
+ USB_INT32S rc;
+
+ MS_GetMaxLUN(); /* Get maximum logical unit number */
+ retry = 80;
+ while(retry) {
+ rc = MS_TestUnitReady(); /* Test whether the unit is ready */
+ if (rc == OK) {
+ break;
+ }
+ MS_GetSenseInfo(); /* Get sense information */
+ retry--;
+ }
+ if (rc != OK) {
+ PRINT_Err(rc);
+ return (rc);
+ }
+ rc = MS_ReadCapacity(numBlks, blkSize); /* Read capacity of the disk */
+ MS_BlkSize = *blkSize; // Set global
+ rc = MS_Inquire (inquiryResult);
+ return (rc);
+}
+/*
+**************************************************************************************************************
+* PARSE THE CONFIGURATION
+*
+* Description: This function is used to parse the configuration
+*
+* Arguments : None
+*
+* Returns : OK if Success
+* ERR_INVALID_BOOTSIG if Failed
+*
+**************************************************************************************************************
+*/
+
+USB_INT32S MS_ParseConfiguration (void)
+{
+ volatile USB_INT08U *desc_ptr;
+ USB_INT08U ms_int_found;
+
+
+ desc_ptr = TDBuffer;
+ ms_int_found = 0;
+
+ if (desc_ptr[1] != USB_DESCRIPTOR_TYPE_CONFIGURATION) {
+ return (ERR_BAD_CONFIGURATION);
+ }
+ desc_ptr += desc_ptr[0];
+
+ while (desc_ptr != TDBuffer + ReadLE16U(&TDBuffer[2])) {
+
+ switch (desc_ptr[1]) {
+
+ case USB_DESCRIPTOR_TYPE_INTERFACE: /* If it is an interface descriptor */
+ if (desc_ptr[5] == MASS_STORAGE_CLASS && /* check if the class is mass storage */
+ desc_ptr[6] == MASS_STORAGE_SUBCLASS_SCSI && /* check if the subclass is SCSI */
+ desc_ptr[7] == MASS_STORAGE_PROTOCOL_BO) { /* check if the protocol is Bulk only */
+ ms_int_found = 1;
+ desc_ptr += desc_ptr[0]; /* Move to next descriptor start */
+ }
+ break;
+
+ case USB_DESCRIPTOR_TYPE_ENDPOINT: /* If it is an endpoint descriptor */
+ if ((desc_ptr[3] & 0x03) == 0x02) { /* If it is Bulk endpoint */
+ if (desc_ptr[2] & 0x80) { /* If it is In endpoint */
+ EDBulkIn->Control = 1 | /* USB address */
+ ((desc_ptr[2] & 0x7F) << 7) | /* Endpoint address */
+ (2 << 11) | /* direction */
+ (ReadLE16U(&desc_ptr[4]) << 16); /* MaxPkt Size */
+ desc_ptr += desc_ptr[0]; /* Move to next descriptor start */
+ } else { /* If it is Out endpoint */
+ EDBulkOut->Control = 1 | /* USB address */
+ ((desc_ptr[2] & 0x7F) << 7) | /* Endpoint address */
+ (1 << 11) | /* direction */
+ (ReadLE16U(&desc_ptr[4]) << 16); /* MaxPkt Size */
+ desc_ptr += desc_ptr[0]; /* Move to next descriptor start */
+ }
+ } else { /* If it is not bulk end point */
+ desc_ptr += desc_ptr[0]; /* Move to next descriptor start */
+ }
+ break;
+
+ default: /* If the descriptor is neither interface nor endpoint */
+ desc_ptr += desc_ptr[0]; /* Move to next descriptor start */
+ break;
+ }
+ }
+ if (ms_int_found) {
+ PRINT_Log("Mass Storage device connected\n");
+ return (OK);
+ } else {
+ PRINT_Log("Not a Mass Storage device\n");
+ return (ERR_NO_MS_INTERFACE);
+ }
+}
+
+/*
+**************************************************************************************************************
+* GET MAXIMUM LOGICAL UNIT
+*
+* Description: This function returns the maximum logical unit from the device
+*
+* Arguments : None
+*
+* Returns : OK if Success
+* ERR_INVALID_BOOTSIG if Failed
+*
+**************************************************************************************************************
+*/
+
+USB_INT32S MS_GetMaxLUN (void)
+{
+ USB_INT32S rc;
+
+
+ rc = Host_CtrlRecv(USB_DEVICE_TO_HOST | USB_REQUEST_TYPE_CLASS | USB_RECIPIENT_INTERFACE,
+ MS_GET_MAX_LUN_REQ,
+ 0,
+ 0,
+ 1,
+ TDBuffer);
+ return (rc);
+}
+
+/*
+**************************************************************************************************************
+* GET SENSE INFORMATION
+*
+* Description: This function is used to get sense information from the device
+*
+* Arguments : None
+*
+* Returns : OK if Success
+* ERROR if Failed
+*
+**************************************************************************************************************
+*/
+
+USB_INT32S MS_GetSenseInfo (void)
+{
+ USB_INT32S rc;
+
+
+ Fill_MSCommand(0, 0, 0, MS_DATA_DIR_IN, SCSI_CMD_REQUEST_SENSE, 6);
+ rc = Host_ProcessTD(EDBulkOut, TD_OUT, TDBuffer, CBW_SIZE);
+ if (rc == OK) {
+ rc = Host_ProcessTD(EDBulkIn, TD_IN, TDBuffer, 18);
+ if (rc == OK) {
+ rc = Host_ProcessTD(EDBulkIn, TD_IN, TDBuffer, CSW_SIZE);
+ if (rc == OK) {
+ if (TDBuffer[12] != 0) {
+ rc = ERR_MS_CMD_FAILED;
+ }
+ }
+ }
+ }
+ return (rc);
+}
+
+/*
+**************************************************************************************************************
+* TEST UNIT READY
+*
+* Description: This function is used to test whether the unit is ready or not
+*
+* Arguments : None
+*
+* Returns : OK if Success
+* ERROR if Failed
+*
+**************************************************************************************************************
+*/
+
+USB_INT32S MS_TestUnitReady (void)
+{
+ USB_INT32S rc;
+
+
+ Fill_MSCommand(0, 0, 0, MS_DATA_DIR_NONE, SCSI_CMD_TEST_UNIT_READY, 6);
+ rc = Host_ProcessTD(EDBulkOut, TD_OUT, TDBuffer, CBW_SIZE);
+ if (rc == OK) {
+ rc = Host_ProcessTD(EDBulkIn, TD_IN, TDBuffer, CSW_SIZE);
+ if (rc == OK) {
+ if (TDBuffer[12] != 0) {
+ rc = ERR_MS_CMD_FAILED;
+ }
+ }
+ }
+ return (rc);
+}
+
+/*
+**************************************************************************************************************
+* READ CAPACITY
+*
+* Description: This function is used to read the capacity of the mass storage device
+*
+* Arguments : None
+*
+* Returns : OK if Success
+* ERROR if Failed
+*
+**************************************************************************************************************
+*/
+
+USB_INT32S MS_ReadCapacity (USB_INT32U *numBlks, USB_INT32U *blkSize)
+{
+ USB_INT32S rc;
+
+
+ Fill_MSCommand(0, 0, 0, MS_DATA_DIR_IN, SCSI_CMD_READ_CAPACITY, 10);
+ rc = Host_ProcessTD(EDBulkOut, TD_OUT, TDBuffer, CBW_SIZE);
+ if (rc == OK) {
+ rc = Host_ProcessTD(EDBulkIn, TD_IN, TDBuffer, 8);
+ if (rc == OK) {
+ if (numBlks)
+ *numBlks = ReadBE32U(&TDBuffer[0]);
+ if (blkSize)
+ *blkSize = ReadBE32U(&TDBuffer[4]);
+ rc = Host_ProcessTD(EDBulkIn, TD_IN, TDBuffer, CSW_SIZE);
+ if (rc == OK) {
+ if (TDBuffer[12] != 0) {
+ rc = ERR_MS_CMD_FAILED;
+ }
+ }
+ }
+ }
+ return (rc);
+}
+
+
+
+USB_INT32S MS_Inquire (USB_INT08U *response)
+{
+ USB_INT32S rc;
+ USB_INT32U i;
+
+ Fill_MSCommand(0, 0, 0, MS_DATA_DIR_IN, SCSI_CMD_INQUIRY, 6);
+ rc = Host_ProcessTD(EDBulkOut, TD_OUT, TDBuffer, CBW_SIZE);
+ if (rc == OK) {
+ rc = Host_ProcessTD(EDBulkIn, TD_IN, TDBuffer, INQUIRY_LENGTH);
+ if (rc == OK) {
+ if (response) {
+ for ( i = 0; i < INQUIRY_LENGTH; i++ )
+ *response++ = *TDBuffer++;
+#if 0
+ MemCpy (response, TDBuffer, INQUIRY_LENGTH);
+ StrNullTrailingSpace (response->vendorID, SCSI_INQUIRY_VENDORCHARS);
+ StrNullTrailingSpace (response->productID, SCSI_INQUIRY_PRODUCTCHARS);
+ StrNullTrailingSpace (response->productRev, SCSI_INQUIRY_REVCHARS);
+#endif
+ }
+ rc = Host_ProcessTD(EDBulkIn, TD_IN, TDBuffer, CSW_SIZE);
+ if (rc == OK) {
+ if (TDBuffer[12] != 0) { // bCSWStatus byte
+ rc = ERR_MS_CMD_FAILED;
+ }
+ }
+ }
+ }
+ return (rc);
+}
+
+/*
+**************************************************************************************************************
+* RECEIVE THE BULK DATA
+*
+* Description: This function is used to receive the bulk data
+*
+* Arguments : None
+*
+* Returns : OK if Success
+* ERR_INVALID_BOOTSIG if Failed
+*
+**************************************************************************************************************
+*/
+
+USB_INT32S MS_BulkRecv ( USB_INT32U block_number,
+ USB_INT16U num_blocks,
+ volatile USB_INT08U *user_buffer)
+{
+ USB_INT32S rc;
+ int i;
+ volatile USB_INT08U *c = user_buffer;
+ for (i=0;i<MS_BlkSize*num_blocks;i++)
+ *c++ = 0;
+
+
+ Fill_MSCommand(block_number, MS_BlkSize, num_blocks, MS_DATA_DIR_IN, SCSI_CMD_READ_10, 10);
+
+ rc = Host_ProcessTD(EDBulkOut, TD_OUT, TDBuffer, CBW_SIZE);
+ if (rc == OK) {
+ rc = Host_ProcessTD(EDBulkIn, TD_IN, user_buffer, MS_BlkSize * num_blocks);
+ if (rc == OK) {
+ rc = Host_ProcessTD(EDBulkIn, TD_IN, TDBuffer, CSW_SIZE);
+ if (rc == OK) {
+ if (TDBuffer[12] != 0) {
+ rc = ERR_MS_CMD_FAILED;
+ }
+ }
+ }
+ }
+ return (rc);
+}
+
+/*
+**************************************************************************************************************
+* SEND BULK DATA
+*
+* Description: This function is used to send the bulk data
+*
+* Arguments : None
+*
+* Returns : OK if Success
+* ERR_INVALID_BOOTSIG if Failed
+*
+**************************************************************************************************************
+*/
+
+USB_INT32S MS_BulkSend ( USB_INT32U block_number,
+ USB_INT16U num_blocks,
+ volatile USB_INT08U *user_buffer)
+{
+ USB_INT32S rc;
+
+
+ Fill_MSCommand(block_number, MS_BlkSize, num_blocks, MS_DATA_DIR_OUT, SCSI_CMD_WRITE_10, 10);
+
+ rc = Host_ProcessTD(EDBulkOut, TD_OUT, TDBuffer, CBW_SIZE);
+ if (rc == OK) {
+ rc = Host_ProcessTD(EDBulkOut, TD_OUT, user_buffer, MS_BlkSize * num_blocks);
+ if (rc == OK) {
+ rc = Host_ProcessTD(EDBulkIn, TD_IN, TDBuffer, CSW_SIZE);
+ if (rc == OK) {
+ if (TDBuffer[12] != 0) {
+ rc = ERR_MS_CMD_FAILED;
+ }
+ }
+ }
+ }
+ return (rc);
+}
+
+/*
+**************************************************************************************************************
+* FILL MASS STORAGE COMMAND
+*
+* Description: This function is used to fill the mass storage command
+*
+* Arguments : None
+*
+* Returns : OK if Success
+* ERR_INVALID_BOOTSIG if Failed
+*
+**************************************************************************************************************
+*/
+
+void Fill_MSCommand (USB_INT32U block_number,
+ USB_INT32U block_size,
+ USB_INT16U num_blocks,
+ MS_DATA_DIR direction,
+ USB_INT08U scsi_cmd,
+ USB_INT08U scsi_cmd_len)
+{
+ USB_INT32U data_len;
+ static USB_INT32U tag_cnt = 0;
+ USB_INT32U cnt;
+
+
+ for (cnt = 0; cnt < CBW_SIZE; cnt++) {
+ TDBuffer[cnt] = 0;
+ }
+ switch(scsi_cmd) {
+
+ case SCSI_CMD_TEST_UNIT_READY:
+ data_len = 0;
+ break;
+ case SCSI_CMD_READ_CAPACITY:
+ data_len = 8;
+ break;
+ case SCSI_CMD_REQUEST_SENSE:
+ data_len = 18;
+ break;
+ case SCSI_CMD_INQUIRY:
+ data_len = 36;
+ break;
+ default:
+ data_len = block_size * num_blocks;
+ break;
+ }
+ WriteLE32U(TDBuffer, CBW_SIGNATURE);
+ WriteLE32U(&TDBuffer[4], tag_cnt);
+ WriteLE32U(&TDBuffer[8], data_len);
+ TDBuffer[12] = (direction == MS_DATA_DIR_NONE) ? 0 : direction;
+ TDBuffer[14] = scsi_cmd_len; /* Length of the CBW */
+ TDBuffer[15] = scsi_cmd;
+ if ((scsi_cmd == SCSI_CMD_REQUEST_SENSE)
+ || (scsi_cmd == SCSI_CMD_INQUIRY)) {
+ TDBuffer[19] = (USB_INT08U)data_len;
+ } else {
+ WriteBE32U(&TDBuffer[17], block_number);
+ }
+ WriteBE16U(&TDBuffer[22], num_blocks);
+}
diff -r 000000000000 -r e7efc8468066 USBHostLite/usbhost_ms.h
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/USBHostLite/usbhost_ms.h Fri Aug 05 15:00:51 2011 +0000
@@ -0,0 +1,101 @@
+/*
+**************************************************************************************************************
+* NXP USB Host Stack
+*
+* (c) Copyright 2008, NXP SemiConductors
+* (c) Copyright 2008, OnChip Technologies LLC
+* All Rights Reserved
+*
+* www.nxp.com
+* www.onchiptech.com
+*
+* File : usbhost_ms.h
+* Programmer(s) : Ravikanth.P
+* Version :
+*
+**************************************************************************************************************
+*/
+
+#ifndef USBHOST_MS_H
+#define USBHOST_MS_H
+
+/*
+**************************************************************************************************************
+* INCLUDE HEADER FILES
+**************************************************************************************************************
+*/
+
+#include "usbhost_inc.h"
+
+/*
+**************************************************************************************************************
+* MASS STORAGE SPECIFIC DEFINITIONS
+**************************************************************************************************************
+*/
+
+#define MS_GET_MAX_LUN_REQ 0xFE
+#define MASS_STORAGE_CLASS 0x08
+#define MASS_STORAGE_SUBCLASS_SCSI 0x06
+#define MASS_STORAGE_PROTOCOL_BO 0x50
+
+#define INQUIRY_LENGTH 36
+/*
+**************************************************************************************************************
+* SCSI SPECIFIC DEFINITIONS
+**************************************************************************************************************
+*/
+
+#define CBW_SIGNATURE 0x43425355
+#define CSW_SIGNATURE 0x53425355
+#define CBW_SIZE 31
+#define CSW_SIZE 13
+#define CSW_CMD_PASSED 0x00
+#define SCSI_CMD_REQUEST_SENSE 0x03
+#define SCSI_CMD_TEST_UNIT_READY 0x00
+#define SCSI_CMD_INQUIRY 0x12
+#define SCSI_CMD_READ_10 0x28
+#define SCSI_CMD_READ_CAPACITY 0x25
+#define SCSI_CMD_WRITE_10 0x2A
+
+/*
+**************************************************************************************************************
+* TYPE DEFINITIONS
+**************************************************************************************************************
+*/
+
+typedef enum ms_data_dir {
+
+ MS_DATA_DIR_IN = 0x80,
+ MS_DATA_DIR_OUT = 0x00,
+ MS_DATA_DIR_NONE = 0x01
+
+} MS_DATA_DIR;
+
+/*
+**************************************************************************************************************
+* FUNCTION PROTOTYPES
+**************************************************************************************************************
+*/
+
+USB_INT32S MS_BulkRecv ( USB_INT32U block_number,
+ USB_INT16U num_blocks,
+ volatile USB_INT08U *user_buffer);
+
+USB_INT32S MS_BulkSend ( USB_INT32U block_number,
+ USB_INT16U num_blocks,
+ volatile USB_INT08U *user_buffer);
+USB_INT32S MS_ParseConfiguration(void);
+USB_INT32S MS_TestUnitReady (void);
+USB_INT32S MS_ReadCapacity (USB_INT32U *numBlks, USB_INT32U *blkSize);
+USB_INT32S MS_GetMaxLUN (void);
+USB_INT32S MS_GetSenseInfo (void);
+USB_INT32S MS_Init (USB_INT32U *blkSize, USB_INT32U *numBlks, USB_INT08U *inquiryResult);
+USB_INT32S MS_Inquire (USB_INT08U *response);
+
+void Fill_MSCommand ( USB_INT32U block_number,
+ USB_INT32U block_size,
+ USB_INT16U num_blocks,
+ MS_DATA_DIR direction,
+ USB_INT08U scsi_cmd,
+ USB_INT08U scsi_cmd_len);
+#endif
diff -r 000000000000 -r e7efc8468066 main.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/main.cpp Fri Aug 05 15:00:51 2011 +0000
@@ -0,0 +1,128 @@
+#include "mbed.h"
+#include "SDHCFileSystem.h"
+#include "MSCFileSystem.h"
+#include "TLV320.h"
+
+TLV320 audio(p9, p10, 52, p5, p6, p7, p8, p29); //TLV320 object
+SDFileSystem sd(p11, p12, p13, p14, "sd"); //SD Card object
+MSCFileSystem msc("usb"); //USB object
+InterruptIn finish(p16); //button to stop recording
+FILE *outfp; //file pointer object
+
+/* Buffers, pointers and states */
+int circularBuffer[4096];
+volatile int writePointer = 0;
+volatile int theta = 0;
+volatile bool recording = false;
+volatile long size = 36;
+
+/* Record settings */
+unsigned int frequency = 8000; //sample rate
+unsigned short wordWidth = 16; //bits per sample per channel
+unsigned short channels = 2; //number of channels
+
+/* Function to read content of I2SRXFIFO into circular buffer */
+void record(void){
+ audio.read();
+ circularBuffer[writePointer] = audio.rxBuffer[0];
+ circularBuffer[++writePointer] = audio.rxBuffer[1];
+ circularBuffer[++writePointer] = audio.rxBuffer[2];
+ circularBuffer[++writePointer] = audio.rxBuffer[3];
+ ++writePointer;
+ theta += 4;
+ if(writePointer > 4094) writePointer = 0;
+}
+
+/*Function to write data from circular buffer to usb storage */
+void streamToFile(void){
+ static volatile int readPointer = 0;
+ while(recording){
+ if(theta > 512){ // only start writing when there is enough data!
+ fwrite(&circularBuffer[readPointer], 4, 128, outfp); //write data in 512 byte chunks, this is
+ theta -= 128; //the natural usb memory chunk size
+ readPointer += 128;
+ if(readPointer > 4094) readPointer = 0;
+ size += 512;
+ }
+ }
+ //Complete file and header details
+ fseek(outfp, 0, SEEK_END);
+ for(int k = 0; k < theta; ++k){
+ fwrite(&circularBuffer[readPointer], 4, 1, outfp); //this writes the last of the data
+ ++readPointer; //held in the circular buffer to memory
+ if(readPointer > 4094) readPointer = 0;
+ size += 4;
+ }
+ return;
+}
+
+/* Function to stop recording, namely to stop audio interrupts */
+void stopRecording(void){
+ audio.stop();
+ recording = false;
+ return;
+}
+
+/* Function to write .wav header */
+void startHeader(void){
+/* RIFF WAV header
+ * ---------------
+ * This is composed of several sub chunks. All strings
+ * are in big endian form. All numeric data is in little endian form.
+ * All data to be completed after recording (i.e. data chunk size) is default blank.
+ */
+ char blockAlign = (char)channels * (wordWidth/8);
+ int bps = (int)frequency * blockAlign;
+ char header[44] = { 0x52, 0x49, 0x46, 0x46, //'RIFF'
+ 0x00, 0x00, 0x00, 0x00, //file size
+ 0x57, 0x41, 0x56, 0x45, //'WAVE'
+ /*sub chunk 1*/ 0x66, 0x6d, 0x74, 0x20, //'fmt '
+ 0x10, 0x00, 0x00, 0x00, //subchunk size = 16
+ 0x01, 0x00, ((char)(channels & 0xff)), 0x00, //PCM compression code | number of channels - I assume no more than 2 channels
+ ((char)((frequency & 0xff)>>0)), ((char)((frequency & 0xff00)>>8)), ((char)((frequency & 0xff0000)>>16)), ((char)((frequency & 0xff000000)>>24)), //sample rate
+ ((char)((bps & 0xff)>>0)), ((char)((bps & 0xff00)>>8)), ((char)((bps & 0xff0000)>>16)), ((char)((bps & 0xff000000)>>24)), //bit rate
+ blockAlign, 0x00, ((char)((wordWidth & 0xff)>>0)), ((char)((wordWidth & 0xff00)>>8)), //bloack align | wordwidth
+ /*sub chunk 2*/ 0x64, 0x61, 0x74, 0x61, //'data'
+ 0x00, 0x00, 0x00, 0x00}; //size of data chunk in bytes
+ fwrite(header, 1, 44, outfp);
+}
+
+/* Function to complete header, once recording finishes */
+void completeHeader(void){
+ fseek(outfp, 4, SEEK_SET);
+ fputc((int) (0xff & size), outfp); //All these lines are needed to switch the endianess of the data
+ fputc((int) ((0xff00 & size) >> 8), outfp);
+ fputc((int) ((0xff0000 & size) >> 16), outfp);
+ fputc((int) ((0xff000000 & size) >> 24), outfp);
+ fseek(outfp, 40, SEEK_SET);
+ size -= 36;
+ fputc((int) (0xff & size), outfp);
+ fputc((int) ((0xff00 & size) >> 8), outfp);
+ fputc((int) ((0xff0000 & size) >> 16), outfp);
+ fputc((int) ((0xff000000 & size) >> 24), outfp);
+}
+
+/* Main */
+int main(){
+ /* Create a file to write to */
+ outfp = fopen("/usb/rec.wav", "w");
+ if(outfp == NULL){
+ perror("Error opening file!");
+ exit(1);
+ }
+ startHeader(); //write first half of header
+ audio.power(0x02); //power up all TLV320, just not microphone
+ audio.inputVolume(0.999, 0.999); //Set input volume to max - I don't like to use 1.0 due to rounding errors
+ audio.frequency(frequency);
+ audio.format(wordWidth, (2-channels)); //note int mode = 2 - channels
+ audio.attach(&record); //attach record function to audio interrupt
+ finish.rise(&stopRecording); //attach stop button
+ for(int j = 0; j < 4096; ++j){
+ circularBuffer[j] = 0; //clear circular buffer
+ }
+ recording = true;
+ audio.start(RECEIVE); //start recording
+ streamToFile();
+ completeHeader(); //once finished recording complete the header
+ fclose(outfp); //and close the file
+}
\ No newline at end of file
diff -r 000000000000 -r e7efc8468066 mbed.bld --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/mbed.bld Fri Aug 05 15:00:51 2011 +0000 @@ -0,0 +1,1 @@ +http://mbed.org/users/mbed_official/code/mbed/builds/63bcd7ba4912