Boris Tournier / Mbed OS WappAutomation2_With_Reset_WO_Switch_Cable

WappAutomation 2 : - WITH RESET - WITHOUT Switch Cable Tested on TEL50

Dependencies:   MFRC522

Diff: main.cpp

Revision:
7:64d536d218c3
Parent:
6:f7c355fcb302
Child:
9:cfa9a379dbd3
--- a/main.cpp	Tue Jan 09 16:01:49 2018 +0000
+++ b/main.cpp	Wed Jan 31 10:17:03 2018 +0000
@@ -4,8 +4,8 @@
 
 
 //***************************** Change this for each new prober installation ********************************
-#define PROBER_NAME "tl19"
-#define IP          "10.129.97.106"
+#define PROBER_NAME "tl26"
+#define IP          "10.129.97.118"
 /*Please update the list below:
     TEL12 : 10.129.97.100
     TEL20 : 10.129.97.101
@@ -23,6 +23,17 @@
     TEL21 : 10.129.97.113
     TEL22 : 10.129.97.114
     TEL34 : 10.129.97.115
+    TEL30 : 10.129.97.116
+    TEL32 : 10.129.97.117
+    TEL26 : 10.129.97.118
+    TEL25 : 10.129.97.119
+    TEL28 : 10.129.97.120
+    TEL29 : 10.129.97.121
+    TEL31 : 10.129.97.122
+    TEL33 : 10.129.97.123
+    TEL42 : 10.129.97.124
+    TEL43 : 10.129.97.125
+    TEL44 : 10.129.97.126
 ************************************************************************************************************/
 
 
@@ -66,7 +77,7 @@
 
 #define GATEWAY    "10.129.97.254"    //The gateway to go out the prober VLAN
 #define MASK       "255.255.255.0"
-#define SERVER     "10.18.47.90"      //"164.129.103.103"   //Automation server IP Address - { 164, 129, 103, 88 } for Dev Automation server
+#define SERVER     "10.18.47.90"      //Automation server IP Address - { 164, 129, 103, 88 } for Dev Automation server
 #define PORT       7778               //Automation port
 
 #define MBX_OPEN        "MBX_OPEN srvpat"  //"MBX_OPEN srv_pat"