Diff: main.cpp

Revision:

5:b8848a42df31

Parent:

4:a3e4bb2053cb

--- a/main.cpp	Sun Mar 29 13:12:07 2015 +0000
+++ b/main.cpp	Sat May 09 12:38:29 2020 +0000
@@ -7,69 +7,19 @@
 Serial pc(USBTX, USBRX); // tx, rx
  
 // I2C Communication
-I2C i2c_lcd(p9,p10); // SDA, SCL
-//I2C i2c_lcd(p28,p27); // SDA, SCL
- 
-// SPI Communication
-SPI spi_lcd(p5, NC, p7); // MOSI, MISO, SCLK
+I2C i2c_lcd(PTE0,PTE1); // SDA, SCL
 
 // LCD instantiation 
-//TextLCD lcd(p15, p16, p17, p18, p19, p20, TextLCD::LCD20x2);        // 4bit bus: rs, e, d4-d7
-TextLCD_I2C lcd(&i2c_lcd, 0x40, TextLCD::LCD20x4);                  // I2C exp: I2C bus, PCF8574 Slaveaddress, LCD Type
-//TextLCD_I2C lcd(&i2c_lcd, 0x42, TextLCD::LCD16x2, TextLCD::WS0010); // I2C exp: I2C bus, PCF8574 Slaveaddress, LCD Type, Ctrl Type
-//TextLCD_I2C lcd(&spi_lcd, p8, TextLCD::LCD24x4D);                   // I2C exp: SPI bus, CS pin, LCD Type
-//TextLCD_SPI_N lcd(&spi_lcd, p8, p9, TextLCD::LCD16x2, NC, TextLCD::ST7032_3V3); // SPI native: SPI bus, CS pin, RS pin, LCDType=LCD16x2, BL=NC, LCDTCtrl=ST7032
-//TextLCD_I2C_N lcd(&i2c_lcd, ST7032_SA, TextLCD::LCD16x2, NC, TextLCD::ST7032_3V3); // I2C native: I2C bus, slaveaddress, LCDType=LCD16x2, BL=NC, LCDTCtrl=ST7032 =Ok
-//TextLCD_I2C_N lcd(&i2c_lcd, SSD1803_SA1, TextLCD::LCD20x4D, NC, TextLCD::SSD1803_3V3); // I2C native: I2C bus, slaveaddress, LCDType=LCD20x4D, BL=NC, LCDTCtrl=SSD1803 =Ok
- 
-int main() {   
-  Timer t;
-
-  pc.printf("TextLCD Enhanced Test. Columns=%d, Rows=%d\n\r", lcd.columns(), lcd.rows());
-    
-  for (int row=0; row<lcd.rows(); row++) {
-    int col=0;
-      
-    pc.printf("MemAddr(Col=%d, Row=%d)=0x%02X\n\r", col, row, lcd.getAddress(col, row));      
-//    lcd.putc('-');
-    lcd.putc('0' + row);      
-      
-    for (col=1; col<lcd.columns()-1; col++) {    
-      lcd.putc('*');
-    }
+TextLCD_I2C lcd(&i2c_lcd, 0x4E, TextLCD::LCD16x2);
+int main() {  
  
-    pc.printf("MemAddr(Col=%d, Row=%d)=0x%02X\n\r", col, row, lcd.getAddress(col, row));      
-    lcd.putc('+');       
-  }    
-
-// Fill screen again and time it
-  t.start();
-
-  for (int row=0; row<lcd.rows(); row++) {
-    int col=0;
-      
-    lcd.putc('0' + row);      
-      
-    for (col=1; col<lcd.columns()-1; col++) {    
-      lcd.putc('*');
-    }
+    Timer t;
+    time_t seconds = time(NULL);
+    char buffer[32];
+    strftime(buffer, 32, "%I:%M %p\n", );
+    lcd.printf(" %s", buffer);
  
-    lcd.putc('+');       
-  }    
-  t.stop();    
-  pc.printf("All my hard work took %f sec\r\n", t.read());          
-
-// Show cursor as blinking character
-   lcd.setCursor(TextLCD::CurOff_BlkOn);
- 
-// Set and show user defined characters. A maximum of 8 UDCs are supported by the HD44780.
-// They are defined by a 5x7 bitpattern. 
-  lcd.setUDC(0, (char *) udc_0);  // Show |>
-  lcd.putc(0);    
-  lcd.setUDC(1, (char *) udc_1);  // Show <|
-  lcd.putc(1);    
-    
-  pc.printf("Bye now\r\n");          
+    //lcd.printf("Hello World!");
 }