![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
No range status update (error 255)
Fork of VL53L1X by
Diff: VL53L1X.cpp
- Revision:
- 0:03b7e8deb3ee
- Child:
- 1:0d762892f7af
diff -r 000000000000 -r 03b7e8deb3ee VL53L1X.cpp --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/VL53L1X.cpp Wed Jul 18 16:47:45 2018 +0000 @@ -0,0 +1,266 @@ +#include "VL53L1X.h" + + +uint8_t configBlock[] = { + 0x29, 0x02, 0x10, 0x00, 0x28, 0xBC, 0x7A, 0x81, //8 + 0x80, 0x07, 0x95, 0x00, 0xED, 0xFF, 0xF7, 0xFD, //16 + 0x9E, 0x0E, 0x00, 0x10, 0x01, 0x00, 0x00, 0x00, //24 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x34, 0x00, //32 + 0x28, 0x00, 0x0D, 0x0A, 0x00, 0x00, 0x00, 0x00, //40 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x00, 0x11, //48 + 0x02, 0x00, 0x02, 0x08, 0x00, 0x08, 0x10, 0x01, //56 + 0x01, 0x00, 0x00, 0x00, 0x00, 0xFF, 0x00, 0x02, //64 + 0x00, 0x00, 0x00, 0x00, 0x00, 0x20, 0x0B, 0x00, //72 + 0x00, 0x02, 0x0A, 0x21, 0x00, 0x00, 0x02, 0x00, //80 + 0x00, 0x00, 0x00, 0xC8, 0x00, 0x00, 0x38, 0xFF, //88 + 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x91, 0x0F, //96 + 0x00, 0xA5, 0x0D, 0x00, 0x80, 0x00, 0x0C, 0x08, //104 + 0xB8, 0x00, 0x00, 0x00, 0x00, 0x0E, 0x10, 0x00, //112 + 0x01, 0x00, 0x00, 0x00, 0x00, 0x00, 0x01, 0x0F, //120 + 0x0D, 0x0E, 0x0E, 0x01, 0x00, 0x02, 0xC7, 0xFF, //128 + 0x8B, 0x00, 0x00, 0x00, 0x01, 0x01, 0x40 //129 - 135 (0x81 - 0x87) +}; +//VL6180x::VL6180x(PinName sda, PinName scl, uint8_t addr) : m_i2c(sda, scl), m_addr(addr) {} + +VL53L1X::VL53L1X(PinName SDA, PinName SCL) : _i2c(SDA,SCL){ + //Set I2C fast and bring reset line high + // _i2c.frequency(400000); + _deviceAddress = defaultAddress_VL53L1X; + } + +void VL53L1X::startMeasurement(uint8_t offset) +{ + uint8_t address = 1 + offset; //Start at memory location 0x01, add offset + uint8_t leftToSend = sizeof(configBlock) - offset; + while (leftToSend > 0) + { + uint16_t toSend = I2C_BUFFER_LENGTH - 2; //Max I2C buffer on Arduino is 32, and we need 2 bytes for address + if (toSend > leftToSend) toSend = leftToSend; + + _i2c.write(address << 1);// _i2c.beginTransmission(_deviceAddress); + + _i2c.write(0); //We're only in lower address space. No MSB needed. + _i2c.write(address); + + for (char x = 0 ; x < toSend ; x++) + _i2c.write(configBlock[address + x - 1 - offset]); + + // _i2c.endTransmission(); + + leftToSend -= toSend; + address += toSend; + } +} + +bool VL53L1X::newDataReady(void) +{ + if (readRegister(VL53L1_GPIO__TIO_HV_STATUS) != 0x03) return(true); //New measurement! + return(false); //No new data +} + +//Reset sensor via software +void VL53L1X::softReset() +{ + writeRegister(VL53L1_SOFT_RESET, 0x00); //Reset + wait(.001); //Driver uses 100us + writeRegister(VL53L1_SOFT_RESET, 0x01); //Exit reset +} + +uint16_t VL53L1X::getDistance() +{ + return (readRegister16(VL53L1_RESULT__FINAL_CROSSTALK_CORRECTED_RANGE_MM_SD0)); +} + +uint16_t VL53L1X::getSignalRate() +{ + //From vl53l1_api.c line 2041 + uint16_t reading = readRegister16(VL53L1_RESULT__PEAK_SIGNAL_COUNT_RATE_CROSSTALK_CORRECTED_MCPS_SD0);// << 9; //FIXPOINT97TOFIXPOINT1616 + //float signalRate = (float)reading/65536.0; + return (reading); +} + +void VL53L1X::setDistanceMode(uint8_t mode) +{ + uint8_t periodA; + uint8_t periodB; + uint8_t phaseHigh; + uint8_t phaseInit; + switch (mode) + { + case 0: + periodA = 0x07; + periodB = 0x05; + phaseHigh = 0x38; + phaseInit = 6; + break; + case 1: + periodA = 0x0B; + periodB = 0x09; + phaseHigh = 0x78; + phaseInit = 10; + break; + case 2: + periodA = 0x0F; + periodB = 0x0D; + phaseHigh = 0xB8; + phaseInit = 14; + break; + //If user inputs wrong range, we default to long range + default: + periodA = 0x0F; + periodB = 0x0D; + phaseHigh = 0xB8; + phaseInit = 14; + break; + } + //timing + writeRegister(VL53L1_RANGE_CONFIG__VCSEL_PERIOD_A, periodA); + writeRegister(VL53L1_RANGE_CONFIG__VCSEL_PERIOD_B , periodB); + writeRegister(VL53L1_RANGE_CONFIG__VALID_PHASE_HIGH, phaseHigh); + + //dynamic + writeRegister(VL53L1_SD_CONFIG__WOI_SD0 , periodA); + writeRegister(VL53L1_SD_CONFIG__WOI_SD1, periodB); + writeRegister(VL53L1_SD_CONFIG__INITIAL_PHASE_SD0, phaseInit); + writeRegister(VL53L1_SD_CONFIG__INITIAL_PHASE_SD1, phaseInit); + + _distanceMode = mode; +} +uint8_t VL53L1X::getDistanceMode() +{ + return _distanceMode; +} + +uint8_t VL53L1X::getRangeStatus() +{ +#define VL53L1_DEVICEERROR_VCSELCONTINUITYTESTFAILURE ( 1) +#define VL53L1_DEVICEERROR_VCSELWATCHDOGTESTFAILURE ( 2) +#define VL53L1_DEVICEERROR_NOVHVVALUEFOUND ( 3) +#define VL53L1_DEVICEERROR_MSRCNOTARGET ( 4) +#define VL53L1_DEVICEERROR_RANGEPHASECHECK ( 5) +#define VL53L1_DEVICEERROR_SIGMATHRESHOLDCHECK ( 6) +#define VL53L1_DEVICEERROR_PHASECONSISTENCY ( 7) +#define VL53L1_DEVICEERROR_MINCLIP ( 8) +#define VL53L1_DEVICEERROR_RANGECOMPLETE ( 9) +#define VL53L1_DEVICEERROR_ALGOUNDERFLOW ( 10) +#define VL53L1_DEVICEERROR_ALGOOVERFLOW ( 11) +#define VL53L1_DEVICEERROR_RANGEIGNORETHRESHOLD ( 12) +#define VL53L1_DEVICEERROR_USERROICLIP ( 13) +#define VL53L1_DEVICEERROR_REFSPADCHARNOTENOUGHDPADS ( 14) +#define VL53L1_DEVICEERROR_REFSPADCHARMORETHANTARGET ( 15) +#define VL53L1_DEVICEERROR_REFSPADCHARLESSTHANTARGET ( 16) +#define VL53L1_DEVICEERROR_MULTCLIPFAIL ( 17) +#define VL53L1_DEVICEERROR_GPHSTREAMCOUNT0READY ( 18) +#define VL53L1_DEVICEERROR_RANGECOMPLETE_NO_WRAP_CHECK ( 19) +#define VL53L1_DEVICEERROR_EVENTCONSISTENCY ( 20) +#define VL53L1_DEVICEERROR_MINSIGNALEVENTCHECK ( 21) +#define VL53L1_DEVICEERROR_RANGECOMPLETE_MERGED_PULSE ( 22) + +#define VL53L1_RANGESTATUS_RANGE_VALID 0 /*!<The Range is valid. */ +#define VL53L1_RANGESTATUS_SIGMA_FAIL 1 /*!<Sigma Fail. */ +#define VL53L1_RANGESTATUS_SIGNAL_FAIL 2 /*!<Signal fail. */ +#define VL53L1_RANGESTATUS_RANGE_VALID_MIN_RANGE_CLIPPED 3 /*!<Target is below minimum detection threshold. */ +#define VL53L1_RANGESTATUS_OUTOFBOUNDS_FAIL 4 /*!<Phase out of valid limits - different to a wrap exit. */ +#define VL53L1_RANGESTATUS_HARDWARE_FAIL 5 /*!<Hardware fail. */ +#define VL53L1_RANGESTATUS_RANGE_VALID_NO_WRAP_CHECK_FAIL 6 /*!<The Range is valid but the wraparound check has not been done. */ +#define VL53L1_RANGESTATUS_WRAP_TARGET_FAIL 7 /*!<Wrapped target - no matching phase in other VCSEL period timing. */ +#define VL53L1_RANGESTATUS_PROCESSING_FAIL 8 /*!<Internal algo underflow or overflow in lite ranging. */ +#define VL53L1_RANGESTATUS_XTALK_SIGNAL_FAIL 9 /*!<Specific to lite ranging. */ +#define VL53L1_RANGESTATUS_SYNCRONISATION_INT 10 /*!<1st interrupt when starting ranging in back to back mode. Ignore data. */ +#define VL53L1_RANGESTATUS_RANGE_VALID_MERGED_PULSE 11 /*!<All Range ok but object is result of multiple pulses merging together.*/ +#define VL53L1_RANGESTATUS_TARGET_PRESENT_LACK_OF_SIGNAL 12 /*!<Used by RQL as different to phase fail. */ +#define VL53L1_RANGESTATUS_MIN_RANGE_FAIL 13 /*!<User ROI input is not valid e.g. beyond SPAD Array.*/ +#define VL53L1_RANGESTATUS_RANGE_INVALID 14 /*!<lld returned valid range but negative value ! */ +#define VL53L1_RANGESTATUS_NONE 255 /*!<No Update. */ + + //Read status + uint8_t measurementStatus = readRegister(VL53L1_RESULT__RANGE_STATUS) & 0x1F; + + //Convert status from one to another - From vl53l1_api.c + switch (measurementStatus) { + case VL53L1_DEVICEERROR_GPHSTREAMCOUNT0READY: + measurementStatus = VL53L1_RANGESTATUS_SYNCRONISATION_INT; + break; + case VL53L1_DEVICEERROR_RANGECOMPLETE_NO_WRAP_CHECK: + measurementStatus = VL53L1_RANGESTATUS_RANGE_VALID_NO_WRAP_CHECK_FAIL; + break; + case VL53L1_DEVICEERROR_RANGEPHASECHECK: + measurementStatus = VL53L1_RANGESTATUS_OUTOFBOUNDS_FAIL; + break; + case VL53L1_DEVICEERROR_MSRCNOTARGET: + measurementStatus = VL53L1_RANGESTATUS_SIGNAL_FAIL; + break; + case VL53L1_DEVICEERROR_SIGMATHRESHOLDCHECK: + measurementStatus = VL53L1_RANGESTATUS_SIGMA_FAIL; + break; + case VL53L1_DEVICEERROR_PHASECONSISTENCY: + measurementStatus = VL53L1_RANGESTATUS_WRAP_TARGET_FAIL; + break; + case VL53L1_DEVICEERROR_RANGEIGNORETHRESHOLD: + measurementStatus = VL53L1_RANGESTATUS_XTALK_SIGNAL_FAIL; + break; + case VL53L1_DEVICEERROR_MINCLIP: + measurementStatus = VL53L1_RANGESTATUS_RANGE_VALID_MIN_RANGE_CLIPPED; + break; + case VL53L1_DEVICEERROR_RANGECOMPLETE: + measurementStatus = VL53L1_RANGESTATUS_RANGE_VALID; + break; + default: + measurementStatus = VL53L1_RANGESTATUS_NONE; + } + + return measurementStatus; +} + + +uint8_t VL53L1X::readRegister(uint16_t registerAddr) +{ + uint8_t data; + char data_write[2]; + char data_read[1]; + data_write[0] = (registerAddr >> 8) & 0xFF; //MSB of register address + data_write[1] = registerAddr & 0xFF; //LSB of register address + _i2c.write(_deviceAddress, data_write, 2,0); + _i2c.read(_deviceAddress,data_read,1,1); + //Read Data from selected register + data=data_read[0]; + return data; +} +uint16_t VL53L1X::readRegister16(uint16_t registerAddr) +{ + uint8_t data_low; + uint8_t data_high; + uint16_t data; + + char data_write[2]; + char data_read[2]; + data_write[0] = (registerAddr >> 8) & 0xFF; //MSB of register address + data_write[1] = registerAddr & 0xFF; //LSB of register address + _i2c.write(_deviceAddress, data_write, 2,0); + _i2c.read(_deviceAddress,data_read,2,1); + data_high = data_read[0]; //Read Data from selected register + data_low = data_read[1]; //Read Data from selected register + data = (data_high << 8)|data_low; + + return data; +} + + +void VL53L1X::writeRegister(uint16_t registerAddr, uint8_t data) +{ + char data_write[3]; + data_write[0] = (registerAddr >> 8) & 0xFF; //MSB of register address + data_write[1] = registerAddr & 0xFF; //LSB of register address + data_write[2] = data & 0xFF; + _i2c.write(_deviceAddress, data_write, 3); +} + +void VL53L1X::writeRegister16(uint16_t registerAddr, uint16_t data) +{ + char data_write[4]; + data_write[0] = (registerAddr >> 8) & 0xFF; //MSB of register address + data_write[1] = registerAddr & 0xFF; //LSB of register address + data_write[2] = (data >> 8) & 0xFF; + data_write[3] = data & 0xFF; + _i2c.write(_deviceAddress, data_write, 4); +} \ No newline at end of file