Christian Benitez / Mbed 2 deprecated VL53L1X_Pololu

Prints data bits, range status, and distance (mm)

Dependencies:   mbed

Fork of VL53L1X_Pololu by Jesus Fausto

VL53L1X.cpp@1:67ced5a2c689, 2018-07-31 (annotated)

Committer:
cpbenite
Date:
Tue Jul 31 23:47:38 2018 +0000
Revision:
1:67ced5a2c689
Parent:
0:76ea242a637f 
Prints data bits, range status, and distance (mm)

Who changed what in which revision?

UserRevisionLine numberNew contents of line
jvfausto 0:76ea242a637f 1 // Most of the functionality of this library is based on the VL53L1X API
jvfausto 0:76ea242a637f 2 // provided by ST (STSW-IMG007), and some of the explanatory comments are quoted
jvfausto 0:76ea242a637f 3 // or paraphrased from the API source code, API user manual (UM2356), and
jvfausto 0:76ea242a637f 4 // VL53L1X datasheet.
jvfausto 0:76ea242a637f 5
jvfausto 0:76ea242a637f 6 #include "VL53L1X.h"
jvfausto 0:76ea242a637f 7 #include "mbed.h"
jvfausto 0:76ea242a637f 8
jvfausto 0:76ea242a637f 9 // Constructors ////////////////////////////////////////////////////////////////
jvfausto 0:76ea242a637f 10 VL53L1X::VL53L1X(PinName SDA, PinName SCL) :
jvfausto 0:76ea242a637f 11 _i2c(SDA,SCL)
jvfausto 0:76ea242a637f 12 , io_timeout(0) // no timeout
jvfausto 0:76ea242a637f 13 , did_timeout(false)
jvfausto 0:76ea242a637f 14 , calibrated(false)
jvfausto 0:76ea242a637f 15 , saved_vhv_init(0)
jvfausto 0:76ea242a637f 16 , saved_vhv_timeout(0)
jvfausto 0:76ea242a637f 17 , distance_mode(Unknown){
jvfausto 0:76ea242a637f 18 //Set I2C fast and bring reset line high
jvfausto 0:76ea242a637f 19 _i2c.frequency(400000);
jvfausto 0:76ea242a637f 20 address = AddressDefault << 1;
jvfausto 0:76ea242a637f 21 }
jvfausto 0:76ea242a637f 22
jvfausto 0:76ea242a637f 23 /*VL53L1X::VL53L1X()
jvfausto 0:76ea242a637f 24 : address(AddressDefault)
jvfausto 0:76ea242a637f 25 {
jvfausto 0:76ea242a637f 26 }*/
jvfausto 0:76ea242a637f 27
jvfausto 0:76ea242a637f 28 // Public Methods //////////////////////////////////////////////////////////////
jvfausto 0:76ea242a637f 29
jvfausto 0:76ea242a637f 30 void VL53L1X::setAddress(uint8_t new_addr)
jvfausto 0:76ea242a637f 31 {
jvfausto 0:76ea242a637f 32 writeReg(I2C_SLAVE__DEVICE_ADDRESS, new_addr & 0x7F);
jvfausto 0:76ea242a637f 33 address = new_addr;
jvfausto 0:76ea242a637f 34 }
jvfausto 0:76ea242a637f 35
jvfausto 0:76ea242a637f 36 // Initialize sensor using settings taken mostly from VL53L1_DataInit() and
jvfausto 0:76ea242a637f 37 // VL53L1_StaticInit().
jvfausto 0:76ea242a637f 38 // If io_2v8 (optional) is true or not given, the sensor is configured for 2V8
jvfausto 0:76ea242a637f 39 // mode.
jvfausto 0:76ea242a637f 40 bool VL53L1X::init(bool io_2v8)
jvfausto 0:76ea242a637f 41 {
jvfausto 0:76ea242a637f 42 // check model ID and module type registers (values specified in datasheet)
jvfausto 0:76ea242a637f 43 int tempRegister = readReg16Bit(IDENTIFICATION__MODEL_ID);
jvfausto 0:76ea242a637f 44 printf("temporary %x\r\n", tempRegister);
jvfausto 0:76ea242a637f 45 if (tempRegister != 0xEACC) {
jvfausto 0:76ea242a637f 46 return false;
jvfausto 0:76ea242a637f 47 }
jvfausto 0:76ea242a637f 48
jvfausto 0:76ea242a637f 49 // VL53L1_software_reset() begin
jvfausto 0:76ea242a637f 50
jvfausto 0:76ea242a637f 51 writeReg(SOFT_RESET, 0x00);
jvfausto 0:76ea242a637f 52 wait(.001);
jvfausto 0:76ea242a637f 53 writeReg(SOFT_RESET, 0x01);
jvfausto 0:76ea242a637f 54
jvfausto 0:76ea242a637f 55 // VL53L1_poll_for_boot_completion() begin
jvfausto 0:76ea242a637f 56
jvfausto 0:76ea242a637f 57 startTimeout();
cpbenite 1:67ced5a2c689 58 int firmware = (readReg16Bit(FIRMWARE__SYSTEM_STATUS));
jvfausto 0:76ea242a637f 59 printf("firmware : %x\r\n", firmware);
jvfausto 0:76ea242a637f 60 while ((readReg(FIRMWARE__SYSTEM_STATUS) & 0x01) == 0)
jvfausto 0:76ea242a637f 61 {
jvfausto 0:76ea242a637f 62 printf("stuck\r\n");
jvfausto 0:76ea242a637f 63 if (checkTimeoutExpired())
jvfausto 0:76ea242a637f 64 {
jvfausto 0:76ea242a637f 65 did_timeout = true;
jvfausto 0:76ea242a637f 66 return false;
jvfausto 0:76ea242a637f 67 }
jvfausto 0:76ea242a637f 68 }
jvfausto 0:76ea242a637f 69 // VL53L1_poll_for_boot_completion() end
jvfausto 0:76ea242a637f 70
jvfausto 0:76ea242a637f 71 // VL53L1_software_reset() end
jvfausto 0:76ea242a637f 72
jvfausto 0:76ea242a637f 73 // VL53L1_DataInit() begin
jvfausto 0:76ea242a637f 74
jvfausto 0:76ea242a637f 75 // sensor uses 1V8 mode for I/O by default; switch to 2V8 mode if necessary
jvfausto 0:76ea242a637f 76 if (io_2v8)
jvfausto 0:76ea242a637f 77 {
jvfausto 0:76ea242a637f 78 writeReg(PAD_I2C_HV__EXTSUP_CONFIG,
jvfausto 0:76ea242a637f 79 readReg(PAD_I2C_HV__EXTSUP_CONFIG) | 0x01);
jvfausto 0:76ea242a637f 80 }
jvfausto 0:76ea242a637f 81
jvfausto 0:76ea242a637f 82 // store oscillator info for later use
jvfausto 0:76ea242a637f 83 fast_osc_frequency = readReg16Bit(OSC_MEASURED__FAST_OSC__FREQUENCY);
jvfausto 0:76ea242a637f 84 osc_calibrate_val = readReg16Bit(RESULT__OSC_CALIBRATE_VAL);
jvfausto 0:76ea242a637f 85
jvfausto 0:76ea242a637f 86 // VL53L1_DataInit() end
jvfausto 0:76ea242a637f 87
jvfausto 0:76ea242a637f 88 // VL53L1_StaticInit() begin
jvfausto 0:76ea242a637f 89
jvfausto 0:76ea242a637f 90 // Note that the API does not actually apply the configuration settings below
jvfausto 0:76ea242a637f 91 // when VL53L1_StaticInit() is called: it keeps a copy of the sensor's
jvfausto 0:76ea242a637f 92 // register contents in memory and doesn't actually write them until a
jvfausto 0:76ea242a637f 93 // measurement is started. Writing the configuration here means we don't have
jvfausto 0:76ea242a637f 94 // to keep it all in memory and avoids a lot of redundant writes later.
jvfausto 0:76ea242a637f 95
jvfausto 0:76ea242a637f 96 // the API sets the preset mode to LOWPOWER_AUTONOMOUS here:
jvfausto 0:76ea242a637f 97 // VL53L1_set_preset_mode() begin
jvfausto 0:76ea242a637f 98
jvfausto 0:76ea242a637f 99 // VL53L1_preset_mode_standard_ranging() begin
jvfausto 0:76ea242a637f 100
jvfausto 0:76ea242a637f 101 // values labeled "tuning parm default" are from vl53l1_tuning_parm_defaults.h
jvfausto 0:76ea242a637f 102 // (API uses these in VL53L1_init_tuning_parm_storage_struct())
jvfausto 0:76ea242a637f 103
jvfausto 0:76ea242a637f 104 // static config
jvfausto 0:76ea242a637f 105 // API resets PAD_I2C_HV__EXTSUP_CONFIG here, but maybe we don't want to do
jvfausto 0:76ea242a637f 106 // that? (seems like it would disable 2V8 mode)
jvfausto 0:76ea242a637f 107 writeReg16Bit(DSS_CONFIG__TARGET_TOTAL_RATE_MCPS, TargetRate); // should already be this value after reset
jvfausto 0:76ea242a637f 108 writeReg(GPIO__TIO_HV_STATUS, 0x02);
jvfausto 0:76ea242a637f 109 writeReg(SIGMA_ESTIMATOR__EFFECTIVE_PULSE_WIDTH_NS, 8); // tuning parm default
jvfausto 0:76ea242a637f 110 writeReg(SIGMA_ESTIMATOR__EFFECTIVE_AMBIENT_WIDTH_NS, 16); // tuning parm default
jvfausto 0:76ea242a637f 111 writeReg(ALGO__CROSSTALK_COMPENSATION_VALID_HEIGHT_MM, 0x01);
jvfausto 0:76ea242a637f 112 writeReg(ALGO__RANGE_IGNORE_VALID_HEIGHT_MM, 0xFF);
jvfausto 0:76ea242a637f 113 writeReg(ALGO__RANGE_MIN_CLIP, 0); // tuning parm default
jvfausto 0:76ea242a637f 114 writeReg(ALGO__CONSISTENCY_CHECK__TOLERANCE, 2); // tuning parm default
jvfausto 0:76ea242a637f 115
jvfausto 0:76ea242a637f 116 // general config
jvfausto 0:76ea242a637f 117 writeReg16Bit(SYSTEM__THRESH_RATE_HIGH, 0x0000);
jvfausto 0:76ea242a637f 118 writeReg16Bit(SYSTEM__THRESH_RATE_LOW, 0x0000);
jvfausto 0:76ea242a637f 119 writeReg(DSS_CONFIG__APERTURE_ATTENUATION, 0x38);
jvfausto 0:76ea242a637f 120
jvfausto 0:76ea242a637f 121 // timing config
jvfausto 0:76ea242a637f 122 // most of these settings will be determined later by distance and timing
jvfausto 0:76ea242a637f 123 // budget configuration
jvfausto 0:76ea242a637f 124 writeReg16Bit(RANGE_CONFIG__SIGMA_THRESH, 360); // tuning parm default
jvfausto 0:76ea242a637f 125 writeReg16Bit(RANGE_CONFIG__MIN_COUNT_RATE_RTN_LIMIT_MCPS, 192); // tuning parm default
jvfausto 0:76ea242a637f 126
jvfausto 0:76ea242a637f 127 // dynamic config
jvfausto 0:76ea242a637f 128
jvfausto 0:76ea242a637f 129 writeReg(SYSTEM__GROUPED_PARAMETER_HOLD_0, 0x01);
jvfausto 0:76ea242a637f 130 writeReg(SYSTEM__GROUPED_PARAMETER_HOLD_1, 0x01);
jvfausto 0:76ea242a637f 131 writeReg(SD_CONFIG__QUANTIFIER, 2); // tuning parm default
jvfausto 0:76ea242a637f 132
jvfausto 0:76ea242a637f 133 // VL53L1_preset_mode_standard_ranging() end
jvfausto 0:76ea242a637f 134
jvfausto 0:76ea242a637f 135 // from VL53L1_preset_mode_timed_ranging_*
jvfausto 0:76ea242a637f 136 // GPH is 0 after reset, but writing GPH0 and GPH1 above seem to set GPH to 1,
jvfausto 0:76ea242a637f 137 // and things don't seem to work if we don't set GPH back to 0 (which the API
jvfausto 0:76ea242a637f 138 // does here).
jvfausto 0:76ea242a637f 139 writeReg(SYSTEM__GROUPED_PARAMETER_HOLD, 0x00);
jvfausto 0:76ea242a637f 140 writeReg(SYSTEM__SEED_CONFIG, 1); // tuning parm default
jvfausto 0:76ea242a637f 141
jvfausto 0:76ea242a637f 142 // from VL53L1_config_low_power_auto_mode
jvfausto 0:76ea242a637f 143 writeReg(SYSTEM__SEQUENCE_CONFIG, 0x8B); // VHV, PHASECAL, DSS1, RANGE
jvfausto 0:76ea242a637f 144 writeReg16Bit(DSS_CONFIG__MANUAL_EFFECTIVE_SPADS_SELECT, 200 << 8);
jvfausto 0:76ea242a637f 145 writeReg(DSS_CONFIG__ROI_MODE_CONTROL, 2); // REQUESTED_EFFFECTIVE_SPADS
jvfausto 0:76ea242a637f 146
jvfausto 0:76ea242a637f 147 // VL53L1_set_preset_mode() end
jvfausto 0:76ea242a637f 148
jvfausto 0:76ea242a637f 149 // default to long range, 50 ms timing budget
jvfausto 0:76ea242a637f 150 // note that this is different than what the API defaults to
jvfausto 0:76ea242a637f 151 setDistanceMode(Long);
jvfausto 0:76ea242a637f 152 setMeasurementTimingBudget(50000);
jvfausto 0:76ea242a637f 153
jvfausto 0:76ea242a637f 154 // VL53L1_StaticInit() end
jvfausto 0:76ea242a637f 155
jvfausto 0:76ea242a637f 156 // the API triggers this change in VL53L1_init_and_start_range() once a
jvfausto 0:76ea242a637f 157 // measurement is started; assumes MM1 and MM2 are disabled
jvfausto 0:76ea242a637f 158 writeReg16Bit(ALGO__PART_TO_PART_RANGE_OFFSET_MM,
jvfausto 0:76ea242a637f 159 readReg16Bit(MM_CONFIG__OUTER_OFFSET_MM) * 4);
jvfausto 0:76ea242a637f 160
jvfausto 0:76ea242a637f 161 return true;
jvfausto 0:76ea242a637f 162 }
jvfausto 0:76ea242a637f 163
jvfausto 0:76ea242a637f 164 // Write an 8-bit register
jvfausto 0:76ea242a637f 165 void VL53L1X::writeReg(uint16_t registerAddr, uint8_t data)
jvfausto 0:76ea242a637f 166 {
jvfausto 0:76ea242a637f 167 char data_write[3];
jvfausto 0:76ea242a637f 168 data_write[0] = (registerAddr >> 8) & 0xFF; //MSB of register address
jvfausto 0:76ea242a637f 169 data_write[1] = registerAddr & 0xFF; //LSB of register address
jvfausto 0:76ea242a637f 170 data_write[2] = data & 0xFF;
jvfausto 0:76ea242a637f 171 _i2c.write(address, data_write, 3);
jvfausto 0:76ea242a637f 172 }
jvfausto 0:76ea242a637f 173
jvfausto 0:76ea242a637f 174 void VL53L1X::writeReg16Bit(uint16_t registerAddr, uint16_t data)
jvfausto 0:76ea242a637f 175 {
jvfausto 0:76ea242a637f 176 char data_write[4];
jvfausto 0:76ea242a637f 177 data_write[0] = (registerAddr >> 8) & 0xFF; //MSB of register address
jvfausto 0:76ea242a637f 178 data_write[1] = registerAddr & 0xFF; //LSB of register address
jvfausto 0:76ea242a637f 179 data_write[2] = (data >> 8) & 0xFF;
jvfausto 0:76ea242a637f 180 data_write[3] = data & 0xFF;
jvfausto 0:76ea242a637f 181 _i2c.write(address, data_write, 4);
jvfausto 0:76ea242a637f 182 }
jvfausto 0:76ea242a637f 183
jvfausto 0:76ea242a637f 184
jvfausto 0:76ea242a637f 185 // Write a 32-bit register
cpbenite 1:67ced5a2c689 186 /*
cpbenite 1:67ced5a2c689 187 void VL53L1X::writeReg32Bit(uint16_t registerAddr, uint32_t data)
cpbenite 1:67ced5a2c689 188 {
cpbenite 1:67ced5a2c689 189 char data_write[5];
cpbenite 1:67ced5a2c689 190 data_write[0] = (registerAddr >> 8) & 0xFF; //MSB of register address
cpbenite 1:67ced5a2c689 191 data_write[1] = registerAddr & 0xFF; //LSB of register address
cpbenite 1:67ced5a2c689 192 data_write[2] = (data >> 16) & 0xFF;
cpbenite 1:67ced5a2c689 193 data_write[3] = (data >> 8) & 0xFF;
cpbenite 1:67ced5a2c689 194 data_write[4] = data & 0xFF;
cpbenite 1:67ced5a2c689 195 _i2c.write(address, data_write, 5);
cpbenite 1:67ced5a2c689 196 }
cpbenite 1:67ced5a2c689 197 */
jvfausto 0:76ea242a637f 198 void VL53L1X::writeReg32Bit(uint16_t registerAddr, uint32_t data)
jvfausto 0:76ea242a637f 199 {
jvfausto 0:76ea242a637f 200 char data_write[6];
jvfausto 0:76ea242a637f 201 data_write[0] = (registerAddr >> 8) & 0xFF; //MSB of register address
jvfausto 0:76ea242a637f 202 data_write[1] = registerAddr & 0xFF; //LSB of register address
jvfausto 0:76ea242a637f 203 data_write[2] = (data >> 24) & 0xFF;
jvfausto 0:76ea242a637f 204 data_write[3] = (data >> 16) & 0xFF;
jvfausto 0:76ea242a637f 205 data_write[4] = (data >> 8) & 0xFF;;
jvfausto 0:76ea242a637f 206 data_write[5] = data & 0xFF;
jvfausto 0:76ea242a637f 207 _i2c.write(address, data_write, 6);
jvfausto 0:76ea242a637f 208 }
jvfausto 0:76ea242a637f 209
cpbenite 1:67ced5a2c689 210
jvfausto 0:76ea242a637f 211 // Read an 8-bit register
jvfausto 0:76ea242a637f 212 uint8_t VL53L1X::readReg(uint16_t registerAddr)
jvfausto 0:76ea242a637f 213 {
jvfausto 0:76ea242a637f 214 uint8_t data;
jvfausto 0:76ea242a637f 215 char data_write[2];
jvfausto 0:76ea242a637f 216 char data_read[1];
jvfausto 0:76ea242a637f 217 data_write[0] = (registerAddr >> 8) & 0xFF; //MSB of register address
jvfausto 0:76ea242a637f 218 data_write[1] = registerAddr & 0xFF; //LSB of register address
jvfausto 0:76ea242a637f 219 _i2c.write(address, data_write, 2,0);
jvfausto 0:76ea242a637f 220 _i2c.read(address,data_read,1,1);
jvfausto 0:76ea242a637f 221 //Read Data from selected register
jvfausto 0:76ea242a637f 222 data=data_read[0];
jvfausto 0:76ea242a637f 223 return data;
jvfausto 0:76ea242a637f 224 }
jvfausto 0:76ea242a637f 225
jvfausto 0:76ea242a637f 226 uint16_t VL53L1X::readReg16Bit(uint16_t registerAddr)
jvfausto 0:76ea242a637f 227 {
jvfausto 0:76ea242a637f 228 uint8_t data_low;
jvfausto 0:76ea242a637f 229 uint8_t data_high;
jvfausto 0:76ea242a637f 230 uint16_t data;
jvfausto 0:76ea242a637f 231
jvfausto 0:76ea242a637f 232 char data_write[2];
jvfausto 0:76ea242a637f 233 char data_read[2];
jvfausto 0:76ea242a637f 234 data_write[0] = (registerAddr >> 8) & 0xFF; //MSB of register address
jvfausto 0:76ea242a637f 235 data_write[1] = registerAddr & 0xFF; //LSB of register address
jvfausto 0:76ea242a637f 236 _i2c.write(address, data_write, 2,0);
jvfausto 0:76ea242a637f 237 _i2c.read(address,data_read,2,1);
jvfausto 0:76ea242a637f 238 data_high = data_read[0]; //Read Data from selected register
jvfausto 0:76ea242a637f 239 data_low = data_read[1]; //Read Data from selected register
jvfausto 0:76ea242a637f 240 data = (data_high << 8)|data_low;
jvfausto 0:76ea242a637f 241
jvfausto 0:76ea242a637f 242 return data;
jvfausto 0:76ea242a637f 243 }
jvfausto 0:76ea242a637f 244 // Read a 32-bit register
jvfausto 0:76ea242a637f 245 uint32_t VL53L1X::readReg32Bit(uint16_t reg)
jvfausto 0:76ea242a637f 246 {
jvfausto 0:76ea242a637f 247 uint32_t value;
jvfausto 0:76ea242a637f 248 /*
jvfausto 0:76ea242a637f 249 _i2c.beginTransmission(address);
jvfausto 0:76ea242a637f 250 _i2c.write((reg >> 8) & 0xFF); // reg high byte
jvfausto 0:76ea242a637f 251 _i2c.write( reg & 0xFF); // reg low byte
jvfausto 0:76ea242a637f 252 last_status = _i2c.endTransmission();
jvfausto 0:76ea242a637f 253
jvfausto 0:76ea242a637f 254 _i2c.requestFrom(address, (uint8_t)4);
jvfausto 0:76ea242a637f 255 value = (uint32_t)_i2c.read() << 24; // value highest byte
jvfausto 0:76ea242a637f 256 value |= (uint32_t)_i2c.read() << 16;
jvfausto 0:76ea242a637f 257 value |= (uint16_t)_i2c.read() << 8;
jvfausto 0:76ea242a637f 258 value |= _i2c.read(); // value lowest byte
jvfausto 0:76ea242a637f 259 */
jvfausto 0:76ea242a637f 260 return value;
jvfausto 0:76ea242a637f 261 }
jvfausto 0:76ea242a637f 262
jvfausto 0:76ea242a637f 263 // set distance mode to Short, Medium, or Long
jvfausto 0:76ea242a637f 264 // based on VL53L1_SetDistanceMode()
jvfausto 0:76ea242a637f 265 bool VL53L1X::setDistanceMode(DistanceMode mode)
jvfausto 0:76ea242a637f 266 {
jvfausto 0:76ea242a637f 267 // save existing timing budget
jvfausto 0:76ea242a637f 268 uint32_t budget_us = getMeasurementTimingBudget();
cpbenite 1:67ced5a2c689 269 printf("budget_us = %d\n", budget_us);
jvfausto 0:76ea242a637f 270 switch (mode)
jvfausto 0:76ea242a637f 271 {
jvfausto 0:76ea242a637f 272 case Short:
jvfausto 0:76ea242a637f 273 // from VL53L1_preset_mode_standard_ranging_short_range()
jvfausto 0:76ea242a637f 274
jvfausto 0:76ea242a637f 275 // timing config
jvfausto 0:76ea242a637f 276 writeReg(RANGE_CONFIG__VCSEL_PERIOD_A, 0x07);
jvfausto 0:76ea242a637f 277 writeReg(RANGE_CONFIG__VCSEL_PERIOD_B, 0x05);
jvfausto 0:76ea242a637f 278 writeReg(RANGE_CONFIG__VALID_PHASE_HIGH, 0x38);
jvfausto 0:76ea242a637f 279
jvfausto 0:76ea242a637f 280 // dynamic config
jvfausto 0:76ea242a637f 281 writeReg(SD_CONFIG__WOI_SD0, 0x07);
jvfausto 0:76ea242a637f 282 writeReg(SD_CONFIG__WOI_SD1, 0x05);
jvfausto 0:76ea242a637f 283 writeReg(SD_CONFIG__INITIAL_PHASE_SD0, 6); // tuning parm default
jvfausto 0:76ea242a637f 284 writeReg(SD_CONFIG__INITIAL_PHASE_SD1, 6); // tuning parm default
jvfausto 0:76ea242a637f 285
jvfausto 0:76ea242a637f 286 break;
jvfausto 0:76ea242a637f 287
jvfausto 0:76ea242a637f 288 case Medium:
jvfausto 0:76ea242a637f 289 // from VL53L1_preset_mode_standard_ranging()
jvfausto 0:76ea242a637f 290
jvfausto 0:76ea242a637f 291 // timing config
jvfausto 0:76ea242a637f 292 writeReg(RANGE_CONFIG__VCSEL_PERIOD_A, 0x0B);
jvfausto 0:76ea242a637f 293 writeReg(RANGE_CONFIG__VCSEL_PERIOD_B, 0x09);
jvfausto 0:76ea242a637f 294 writeReg(RANGE_CONFIG__VALID_PHASE_HIGH, 0x78);
jvfausto 0:76ea242a637f 295
jvfausto 0:76ea242a637f 296 // dynamic config
jvfausto 0:76ea242a637f 297 writeReg(SD_CONFIG__WOI_SD0, 0x0B);
jvfausto 0:76ea242a637f 298 writeReg(SD_CONFIG__WOI_SD1, 0x09);
jvfausto 0:76ea242a637f 299 writeReg(SD_CONFIG__INITIAL_PHASE_SD0, 10); // tuning parm default
jvfausto 0:76ea242a637f 300 writeReg(SD_CONFIG__INITIAL_PHASE_SD1, 10); // tuning parm default
jvfausto 0:76ea242a637f 301
jvfausto 0:76ea242a637f 302 break;
jvfausto 0:76ea242a637f 303
jvfausto 0:76ea242a637f 304 case Long: // long
jvfausto 0:76ea242a637f 305 // from VL53L1_preset_mode_standard_ranging_long_range()
jvfausto 0:76ea242a637f 306
jvfausto 0:76ea242a637f 307 // timing config
jvfausto 0:76ea242a637f 308 writeReg(RANGE_CONFIG__VCSEL_PERIOD_A, 0x0F);
jvfausto 0:76ea242a637f 309 writeReg(RANGE_CONFIG__VCSEL_PERIOD_B, 0x0D);
jvfausto 0:76ea242a637f 310 writeReg(RANGE_CONFIG__VALID_PHASE_HIGH, 0xB8);
jvfausto 0:76ea242a637f 311
jvfausto 0:76ea242a637f 312 // dynamic config
jvfausto 0:76ea242a637f 313 writeReg(SD_CONFIG__WOI_SD0, 0x0F);
jvfausto 0:76ea242a637f 314 writeReg(SD_CONFIG__WOI_SD1, 0x0D);
jvfausto 0:76ea242a637f 315 writeReg(SD_CONFIG__INITIAL_PHASE_SD0, 14); // tuning parm default
jvfausto 0:76ea242a637f 316 writeReg(SD_CONFIG__INITIAL_PHASE_SD1, 14); // tuning parm default
jvfausto 0:76ea242a637f 317
jvfausto 0:76ea242a637f 318 break;
jvfausto 0:76ea242a637f 319
jvfausto 0:76ea242a637f 320 default:
jvfausto 0:76ea242a637f 321 // unrecognized mode - do nothing
jvfausto 0:76ea242a637f 322 return false;
jvfausto 0:76ea242a637f 323 }
jvfausto 0:76ea242a637f 324
jvfausto 0:76ea242a637f 325 // reapply timing budget
jvfausto 0:76ea242a637f 326 setMeasurementTimingBudget(budget_us);
jvfausto 0:76ea242a637f 327
jvfausto 0:76ea242a637f 328 // save mode so it can be returned by getDistanceMode()
jvfausto 0:76ea242a637f 329 distance_mode = mode;
jvfausto 0:76ea242a637f 330
jvfausto 0:76ea242a637f 331 return true;
jvfausto 0:76ea242a637f 332 }
jvfausto 0:76ea242a637f 333
jvfausto 0:76ea242a637f 334 // Set the measurement timing budget in microseconds, which is the time allowed
jvfausto 0:76ea242a637f 335 // for one measurement. A longer timing budget allows for more accurate
jvfausto 0:76ea242a637f 336 // measurements.
jvfausto 0:76ea242a637f 337 // based on VL53L1_SetMeasurementTimingBudgetMicroSeconds()
jvfausto 0:76ea242a637f 338 bool VL53L1X::setMeasurementTimingBudget(uint32_t budget_us)
jvfausto 0:76ea242a637f 339 {
jvfausto 0:76ea242a637f 340 // assumes PresetMode is LOWPOWER_AUTONOMOUS
jvfausto 0:76ea242a637f 341
jvfausto 0:76ea242a637f 342 if (budget_us <= TimingGuard) { return false; }
jvfausto 0:76ea242a637f 343
jvfausto 0:76ea242a637f 344 uint32_t range_config_timeout_us = budget_us -= TimingGuard;
jvfausto 0:76ea242a637f 345 if (range_config_timeout_us > 1100000) { return false; } // FDA_MAX_TIMING_BUDGET_US * 2
jvfausto 0:76ea242a637f 346
jvfausto 0:76ea242a637f 347 range_config_timeout_us /= 2;
jvfausto 0:76ea242a637f 348
jvfausto 0:76ea242a637f 349 // VL53L1_calc_timeout_register_values() begin
jvfausto 0:76ea242a637f 350
jvfausto 0:76ea242a637f 351 uint32_t macro_period_us;
jvfausto 0:76ea242a637f 352
jvfausto 0:76ea242a637f 353 // "Update Macro Period for Range A VCSEL Period"
jvfausto 0:76ea242a637f 354 macro_period_us = calcMacroPeriod(readReg(RANGE_CONFIG__VCSEL_PERIOD_A));
jvfausto 0:76ea242a637f 355
jvfausto 0:76ea242a637f 356 // "Update Phase timeout - uses Timing A"
jvfausto 0:76ea242a637f 357 // Timeout of 1000 is tuning parm default (TIMED_PHASECAL_CONFIG_TIMEOUT_US_DEFAULT)
jvfausto 0:76ea242a637f 358 // via VL53L1_get_preset_mode_timing_cfg().
jvfausto 0:76ea242a637f 359 uint32_t phasecal_timeout_mclks = timeoutMicrosecondsToMclks(1000, macro_period_us);
jvfausto 0:76ea242a637f 360 if (phasecal_timeout_mclks > 0xFF) { phasecal_timeout_mclks = 0xFF; }
jvfausto 0:76ea242a637f 361 writeReg(PHASECAL_CONFIG__TIMEOUT_MACROP, phasecal_timeout_mclks);
jvfausto 0:76ea242a637f 362
jvfausto 0:76ea242a637f 363 // "Update MM Timing A timeout"
jvfausto 0:76ea242a637f 364 // Timeout of 1 is tuning parm default (LOWPOWERAUTO_MM_CONFIG_TIMEOUT_US_DEFAULT)
jvfausto 0:76ea242a637f 365 // via VL53L1_get_preset_mode_timing_cfg(). With the API, the register
jvfausto 0:76ea242a637f 366 // actually ends up with a slightly different value because it gets assigned,
jvfausto 0:76ea242a637f 367 // retrieved, recalculated with a different macro period, and reassigned,
jvfausto 0:76ea242a637f 368 // but it probably doesn't matter because it seems like the MM ("mode
jvfausto 0:76ea242a637f 369 // mitigation"?) sequence steps are disabled in low power auto mode anyway.
jvfausto 0:76ea242a637f 370 writeReg16Bit(MM_CONFIG__TIMEOUT_MACROP_A, encodeTimeout(
jvfausto 0:76ea242a637f 371 timeoutMicrosecondsToMclks(1, macro_period_us)));
jvfausto 0:76ea242a637f 372
jvfausto 0:76ea242a637f 373 // "Update Range Timing A timeout"
jvfausto 0:76ea242a637f 374 writeReg16Bit(RANGE_CONFIG__TIMEOUT_MACROP_A, encodeTimeout(
jvfausto 0:76ea242a637f 375 timeoutMicrosecondsToMclks(range_config_timeout_us, macro_period_us)));
jvfausto 0:76ea242a637f 376
jvfausto 0:76ea242a637f 377 // "Update Macro Period for Range B VCSEL Period"
jvfausto 0:76ea242a637f 378 macro_period_us = calcMacroPeriod(readReg(RANGE_CONFIG__VCSEL_PERIOD_B));
jvfausto 0:76ea242a637f 379
jvfausto 0:76ea242a637f 380 // "Update MM Timing B timeout"
jvfausto 0:76ea242a637f 381 // (See earlier comment about MM Timing A timeout.)
jvfausto 0:76ea242a637f 382 writeReg16Bit(MM_CONFIG__TIMEOUT_MACROP_B, encodeTimeout(
jvfausto 0:76ea242a637f 383 timeoutMicrosecondsToMclks(1, macro_period_us)));
jvfausto 0:76ea242a637f 384
jvfausto 0:76ea242a637f 385 // "Update Range Timing B timeout"
jvfausto 0:76ea242a637f 386 writeReg16Bit(RANGE_CONFIG__TIMEOUT_MACROP_B, encodeTimeout(
jvfausto 0:76ea242a637f 387 timeoutMicrosecondsToMclks(range_config_timeout_us, macro_period_us)));
jvfausto 0:76ea242a637f 388 printf("it is true\r\n");
jvfausto 0:76ea242a637f 389 // VL53L1_calc_timeout_register_values() end
jvfausto 0:76ea242a637f 390
jvfausto 0:76ea242a637f 391 return true;
jvfausto 0:76ea242a637f 392 }
jvfausto 0:76ea242a637f 393
jvfausto 0:76ea242a637f 394 // Get the measurement timing budget in microseconds
jvfausto 0:76ea242a637f 395 // based on VL53L1_SetMeasurementTimingBudgetMicroSeconds()
jvfausto 0:76ea242a637f 396 uint32_t VL53L1X::getMeasurementTimingBudget()
jvfausto 0:76ea242a637f 397 {
jvfausto 0:76ea242a637f 398 // assumes PresetMode is LOWPOWER_AUTONOMOUS and these sequence steps are
jvfausto 0:76ea242a637f 399 // enabled: VHV, PHASECAL, DSS1, RANGE
jvfausto 0:76ea242a637f 400
jvfausto 0:76ea242a637f 401 // VL53L1_get_timeouts_us() begin
jvfausto 0:76ea242a637f 402
jvfausto 0:76ea242a637f 403 // "Update Macro Period for Range A VCSEL Period"
jvfausto 0:76ea242a637f 404 uint32_t macro_period_us = calcMacroPeriod(readReg(RANGE_CONFIG__VCSEL_PERIOD_A));
jvfausto 0:76ea242a637f 405
jvfausto 0:76ea242a637f 406 // "Get Range Timing A timeout"
jvfausto 0:76ea242a637f 407
jvfausto 0:76ea242a637f 408 uint32_t range_config_timeout_us = timeoutMclksToMicroseconds(decodeTimeout(
jvfausto 0:76ea242a637f 409 readReg16Bit(RANGE_CONFIG__TIMEOUT_MACROP_A)), macro_period_us);
jvfausto 0:76ea242a637f 410
jvfausto 0:76ea242a637f 411 // VL53L1_get_timeouts_us() end
jvfausto 0:76ea242a637f 412
jvfausto 0:76ea242a637f 413 return 2 * range_config_timeout_us + TimingGuard;
jvfausto 0:76ea242a637f 414 }
jvfausto 0:76ea242a637f 415
jvfausto 0:76ea242a637f 416 // Start continuous ranging measurements, with the given inter-measurement
jvfausto 0:76ea242a637f 417 // period in milliseconds determining how often the sensor takes a measurement.
jvfausto 0:76ea242a637f 418 void VL53L1X::startContinuous(uint32_t period_ms)
jvfausto 0:76ea242a637f 419 {
jvfausto 0:76ea242a637f 420 // from VL53L1_set_inter_measurement_period_ms()
jvfausto 0:76ea242a637f 421 writeReg32Bit(SYSTEM__INTERMEASUREMENT_PERIOD, period_ms * osc_calibrate_val);
jvfausto 0:76ea242a637f 422 writeReg(SYSTEM__INTERRUPT_CLEAR, 0x01); // sys_interrupt_clear_range
jvfausto 0:76ea242a637f 423 writeReg(SYSTEM__MODE_START, 0x40); // mode_range__timed
jvfausto 0:76ea242a637f 424 }
jvfausto 0:76ea242a637f 425
jvfausto 0:76ea242a637f 426 // Stop continuous measurements
jvfausto 0:76ea242a637f 427 // based on VL53L1_stop_range()
jvfausto 0:76ea242a637f 428 void VL53L1X::stopContinuous()
jvfausto 0:76ea242a637f 429 {
jvfausto 0:76ea242a637f 430 writeReg(SYSTEM__MODE_START, 0x80); // mode_range__abort
jvfausto 0:76ea242a637f 431
jvfausto 0:76ea242a637f 432 // VL53L1_low_power_auto_data_stop_range() begin
jvfausto 0:76ea242a637f 433
jvfausto 0:76ea242a637f 434 calibrated = false;
jvfausto 0:76ea242a637f 435
jvfausto 0:76ea242a637f 436 // "restore vhv configs"
jvfausto 0:76ea242a637f 437 if (saved_vhv_init != 0)
jvfausto 0:76ea242a637f 438 {
jvfausto 0:76ea242a637f 439 writeReg(VHV_CONFIG__INIT, saved_vhv_init);
jvfausto 0:76ea242a637f 440 }
jvfausto 0:76ea242a637f 441 if (saved_vhv_timeout != 0)
jvfausto 0:76ea242a637f 442 {
jvfausto 0:76ea242a637f 443 writeReg(VHV_CONFIG__TIMEOUT_MACROP_LOOP_BOUND, saved_vhv_timeout);
jvfausto 0:76ea242a637f 444 }
jvfausto 0:76ea242a637f 445
jvfausto 0:76ea242a637f 446 // "remove phasecal override"
jvfausto 0:76ea242a637f 447 writeReg(PHASECAL_CONFIG__OVERRIDE, 0x00);
jvfausto 0:76ea242a637f 448
jvfausto 0:76ea242a637f 449 // VL53L1_low_power_auto_data_stop_range() end
jvfausto 0:76ea242a637f 450 }
jvfausto 0:76ea242a637f 451
jvfausto 0:76ea242a637f 452 // Returns a range reading in millimeters when continuous mode is active
cpbenite 1:67ced5a2c689 453 // (readRangeSingleMillimetersx () also calls this function after starting a
jvfausto 0:76ea242a637f 454 // single-shot range measurement)
jvfausto 0:76ea242a637f 455 uint16_t VL53L1X::read(bool blocking)
jvfausto 0:76ea242a637f 456 {
jvfausto 0:76ea242a637f 457 if (blocking)
jvfausto 0:76ea242a637f 458 {
cpbenite 1:67ced5a2c689 459 //printf("Blocked. ");
jvfausto 0:76ea242a637f 460 startTimeout();
cpbenite 1:67ced5a2c689 461 //printf("Timeout started. ");
cpbenite 1:67ced5a2c689 462
cpbenite 1:67ced5a2c689 463 /* dataReady returns 0. Loop is never entered. */
jvfausto 0:76ea242a637f 464 while (dataReady())
jvfausto 0:76ea242a637f 465 {
cpbenite 1:67ced5a2c689 466 printf("Data. ");
jvfausto 0:76ea242a637f 467 if (checkTimeoutExpired())
jvfausto 0:76ea242a637f 468 {
cpbenite 1:67ced5a2c689 469 printf("Timeout expired. ");
jvfausto 0:76ea242a637f 470 did_timeout = true;
jvfausto 0:76ea242a637f 471 ranging_data.range_status = None;
jvfausto 0:76ea242a637f 472 ranging_data.range_mm = 0;
jvfausto 0:76ea242a637f 473 ranging_data.peak_signal_count_rate_MCPS = 0;
jvfausto 0:76ea242a637f 474 ranging_data.ambient_count_rate_MCPS = 0;
jvfausto 0:76ea242a637f 475 return ranging_data.range_mm;
jvfausto 0:76ea242a637f 476 }
jvfausto 0:76ea242a637f 477 }
cpbenite 1:67ced5a2c689 478 printf("\n");
jvfausto 0:76ea242a637f 479 }
jvfausto 0:76ea242a637f 480
jvfausto 0:76ea242a637f 481 readResults();
jvfausto 0:76ea242a637f 482
jvfausto 0:76ea242a637f 483 if (!calibrated)
jvfausto 0:76ea242a637f 484 {
cpbenite 1:67ced5a2c689 485 //printf("Not calibrated");
jvfausto 0:76ea242a637f 486 setupManualCalibration();
jvfausto 0:76ea242a637f 487 calibrated = true;
cpbenite 1:67ced5a2c689 488 //printf(". Jk now it is.\n");
jvfausto 0:76ea242a637f 489 }
jvfausto 0:76ea242a637f 490
jvfausto 0:76ea242a637f 491 updateDSS();
jvfausto 0:76ea242a637f 492
jvfausto 0:76ea242a637f 493 getRangingData();
jvfausto 0:76ea242a637f 494
jvfausto 0:76ea242a637f 495 writeReg(SYSTEM__INTERRUPT_CLEAR, 0x01); // sys_interrupt_clear_range
jvfausto 0:76ea242a637f 496
jvfausto 0:76ea242a637f 497 return ranging_data.range_mm;
jvfausto 0:76ea242a637f 498 }
jvfausto 0:76ea242a637f 499
jvfausto 0:76ea242a637f 500 // convert a RangeStatus to a readable string
jvfausto 0:76ea242a637f 501 // Note that on an AVR, these strings are stored in RAM (dynamic memory), which
jvfausto 0:76ea242a637f 502 // makes working with them easier but uses up 200+ bytes of RAM (many AVR-based
jvfausto 0:76ea242a637f 503 // Arduinos only have about 2000 bytes of RAM). You can avoid this memory usage
jvfausto 0:76ea242a637f 504 // if you do not call this function in your sketch.
jvfausto 0:76ea242a637f 505 const char * VL53L1X::rangeStatusToString(RangeStatus status)
jvfausto 0:76ea242a637f 506 {
jvfausto 0:76ea242a637f 507 switch (status)
jvfausto 0:76ea242a637f 508 {
jvfausto 0:76ea242a637f 509 case RangeValid:
jvfausto 0:76ea242a637f 510 return "range valid";
jvfausto 0:76ea242a637f 511
jvfausto 0:76ea242a637f 512 case SigmaFail:
jvfausto 0:76ea242a637f 513 return "sigma fail";
jvfausto 0:76ea242a637f 514
jvfausto 0:76ea242a637f 515 case SignalFail:
jvfausto 0:76ea242a637f 516 return "signal fail";
jvfausto 0:76ea242a637f 517
jvfausto 0:76ea242a637f 518 case RangeValidMinRangeClipped:
jvfausto 0:76ea242a637f 519 return "range valid, min range clipped";
jvfausto 0:76ea242a637f 520
jvfausto 0:76ea242a637f 521 case OutOfBoundsFail:
jvfausto 0:76ea242a637f 522 return "out of bounds fail";
jvfausto 0:76ea242a637f 523
jvfausto 0:76ea242a637f 524 case HardwareFail:
jvfausto 0:76ea242a637f 525 return "hardware fail";
jvfausto 0:76ea242a637f 526
jvfausto 0:76ea242a637f 527 case RangeValidNoWrapCheckFail:
jvfausto 0:76ea242a637f 528 return "range valid, no wrap check fail";
jvfausto 0:76ea242a637f 529
jvfausto 0:76ea242a637f 530 case WrapTargetFail:
jvfausto 0:76ea242a637f 531 return "wrap target fail";
jvfausto 0:76ea242a637f 532
jvfausto 0:76ea242a637f 533 case XtalkSignalFail:
jvfausto 0:76ea242a637f 534 return "xtalk signal fail";
jvfausto 0:76ea242a637f 535
jvfausto 0:76ea242a637f 536 case SynchronizationInt:
jvfausto 0:76ea242a637f 537 return "synchronization int";
jvfausto 0:76ea242a637f 538
jvfausto 0:76ea242a637f 539 case MinRangeFail:
jvfausto 0:76ea242a637f 540 return "min range fail";
jvfausto 0:76ea242a637f 541
jvfausto 0:76ea242a637f 542 case None:
jvfausto 0:76ea242a637f 543 return "no update";
jvfausto 0:76ea242a637f 544
jvfausto 0:76ea242a637f 545 default:
jvfausto 0:76ea242a637f 546 return "unknown status";
jvfausto 0:76ea242a637f 547 }
jvfausto 0:76ea242a637f 548 }
jvfausto 0:76ea242a637f 549
jvfausto 0:76ea242a637f 550 // Did a timeout occur in one of the read functions since the last call to
jvfausto 0:76ea242a637f 551 // timeoutOccurred()?
jvfausto 0:76ea242a637f 552 bool VL53L1X::timeoutOccurred()
jvfausto 0:76ea242a637f 553 {
jvfausto 0:76ea242a637f 554 bool tmp = did_timeout;
jvfausto 0:76ea242a637f 555 did_timeout = false;
jvfausto 0:76ea242a637f 556 return tmp;
jvfausto 0:76ea242a637f 557 }
jvfausto 0:76ea242a637f 558
jvfausto 0:76ea242a637f 559 // Private Methods /////////////////////////////////////////////////////////////
jvfausto 0:76ea242a637f 560
jvfausto 0:76ea242a637f 561 // "Setup ranges after the first one in low power auto mode by turning off
jvfausto 0:76ea242a637f 562 // FW calibration steps and programming static values"
jvfausto 0:76ea242a637f 563 // based on VL53L1_low_power_auto_setup_manual_calibration()
jvfausto 0:76ea242a637f 564 void VL53L1X::setupManualCalibration()
jvfausto 0:76ea242a637f 565 {
jvfausto 0:76ea242a637f 566 // "save original vhv configs"
jvfausto 0:76ea242a637f 567 saved_vhv_init = readReg(VHV_CONFIG__INIT);
jvfausto 0:76ea242a637f 568 saved_vhv_timeout = readReg(VHV_CONFIG__TIMEOUT_MACROP_LOOP_BOUND);
jvfausto 0:76ea242a637f 569
jvfausto 0:76ea242a637f 570 // "disable VHV init"
jvfausto 0:76ea242a637f 571 writeReg(VHV_CONFIG__INIT, saved_vhv_init & 0x7F);
jvfausto 0:76ea242a637f 572
jvfausto 0:76ea242a637f 573 // "set loop bound to tuning param"
jvfausto 0:76ea242a637f 574 writeReg(VHV_CONFIG__TIMEOUT_MACROP_LOOP_BOUND,
jvfausto 0:76ea242a637f 575 (saved_vhv_timeout & 0x03) + (3 << 2)); // tuning parm default (LOWPOWERAUTO_VHV_LOOP_BOUND_DEFAULT)
jvfausto 0:76ea242a637f 576
jvfausto 0:76ea242a637f 577 // "override phasecal"
jvfausto 0:76ea242a637f 578 writeReg(PHASECAL_CONFIG__OVERRIDE, 0x01);
jvfausto 0:76ea242a637f 579 writeReg(CAL_CONFIG__VCSEL_START, readReg(PHASECAL_RESULT__VCSEL_START));
jvfausto 0:76ea242a637f 580 }
jvfausto 0:76ea242a637f 581
jvfausto 0:76ea242a637f 582 // read measurement results into buffer
jvfausto 0:76ea242a637f 583 void VL53L1X::readResults()
jvfausto 0:76ea242a637f 584 {
cpbenite 1:67ced5a2c689 585 char infoToWrite[2];
cpbenite 1:67ced5a2c689 586 char infoToRead[18];
jvfausto 0:76ea242a637f 587 //_i2c.beginTransmission(address);
cpbenite 1:67ced5a2c689 588 //_i2c.write(address);
cpbenite 1:67ced5a2c689 589 //_i2c.write((RESULT__RANGE_STATUS >> 8) & 0xFF); // reg high byte
cpbenite 1:67ced5a2c689 590 //_i2c.write( RESULT__RANGE_STATUS & 0xFF); // reg low byte
jvfausto 0:76ea242a637f 591 // last_status = _i2c.endTransmission();
cpbenite 1:67ced5a2c689 592 infoToWrite[0] = ((RESULT__RANGE_STATUS >> 8) & 0xFF);
cpbenite 1:67ced5a2c689 593 infoToWrite[1] = ( RESULT__RANGE_STATUS & 0xFF);
cpbenite 1:67ced5a2c689 594 _i2c.write(address, infoToWrite, 2, 1);
jvfausto 0:76ea242a637f 595
jvfausto 0:76ea242a637f 596 // _i2c.requestFrom(address, (uint8_t)17);
jvfausto 0:76ea242a637f 597 _i2c.read(address, infoToRead, 17, 0);
cpbenite 1:67ced5a2c689 598
cpbenite 1:67ced5a2c689 599 for(int i = 0; i < 17; i++){
cpbenite 1:67ced5a2c689 600 printf("%x ", infoToRead[i]);
cpbenite 1:67ced5a2c689 601 }
cpbenite 1:67ced5a2c689 602 printf("\n");
jvfausto 0:76ea242a637f 603
cpbenite 1:67ced5a2c689 604 //wait_us(79);
jvfausto 0:76ea242a637f 605 results.range_status = infoToRead[0];
jvfausto 0:76ea242a637f 606
cpbenite 1:67ced5a2c689 607
jvfausto 0:76ea242a637f 608 // infoToRead[1]; // report_status: not used
jvfausto 0:76ea242a637f 609
jvfausto 0:76ea242a637f 610 results.stream_count = infoToRead[2];
jvfausto 0:76ea242a637f 611
jvfausto 0:76ea242a637f 612 results.dss_actual_effective_spads_sd0 = (uint16_t)infoToRead[3] << 8; // high byte
jvfausto 0:76ea242a637f 613 results.dss_actual_effective_spads_sd0 |= infoToRead[4]; // low byte
jvfausto 0:76ea242a637f 614
jvfausto 0:76ea242a637f 615 // infoToRead[5]; // peak_signal_count_rate_mcps_sd0: not used
jvfausto 0:76ea242a637f 616 // infoToRead[6];
jvfausto 0:76ea242a637f 617
jvfausto 0:76ea242a637f 618 results.ambient_count_rate_mcps_sd0 = (uint16_t)infoToRead[7] << 8; // high byte
jvfausto 0:76ea242a637f 619 results.ambient_count_rate_mcps_sd0 |= infoToRead[8]; // low byte
jvfausto 0:76ea242a637f 620
jvfausto 0:76ea242a637f 621 // infoToRead[9]; // sigma_sd0: not used
jvfausto 0:76ea242a637f 622 // infoToRead[10];
jvfausto 0:76ea242a637f 623
jvfausto 0:76ea242a637f 624 // infoToRead[11]; // phase_sd0: not used
jvfausto 0:76ea242a637f 625 // infoToRead[12];
jvfausto 0:76ea242a637f 626
jvfausto 0:76ea242a637f 627 results.final_crosstalk_corrected_range_mm_sd0 = (uint16_t)infoToRead[13] << 8; // high byte
jvfausto 0:76ea242a637f 628 results.final_crosstalk_corrected_range_mm_sd0 |= infoToRead[14]; // low byte
jvfausto 0:76ea242a637f 629
jvfausto 0:76ea242a637f 630 results.peak_signal_count_rate_crosstalk_corrected_mcps_sd0 = (uint16_t)infoToRead[15] << 8; // high byte
jvfausto 0:76ea242a637f 631 results.peak_signal_count_rate_crosstalk_corrected_mcps_sd0 |= infoToRead[16]; // low byte
jvfausto 0:76ea242a637f 632 }
jvfausto 0:76ea242a637f 633
jvfausto 0:76ea242a637f 634 // perform Dynamic SPAD Selection calculation/update
jvfausto 0:76ea242a637f 635 // based on VL53L1_low_power_auto_update_DSS()
jvfausto 0:76ea242a637f 636 void VL53L1X::updateDSS()
jvfausto 0:76ea242a637f 637 {
jvfausto 0:76ea242a637f 638 uint16_t spadCount = results.dss_actual_effective_spads_sd0;
jvfausto 0:76ea242a637f 639
jvfausto 0:76ea242a637f 640 if (spadCount != 0)
jvfausto 0:76ea242a637f 641 {
jvfausto 0:76ea242a637f 642 // "Calc total rate per spad"
jvfausto 0:76ea242a637f 643
jvfausto 0:76ea242a637f 644 uint32_t totalRatePerSpad =
jvfausto 0:76ea242a637f 645 (uint32_t)results.peak_signal_count_rate_crosstalk_corrected_mcps_sd0 +
jvfausto 0:76ea242a637f 646 results.ambient_count_rate_mcps_sd0;
jvfausto 0:76ea242a637f 647
jvfausto 0:76ea242a637f 648 // "clip to 16 bits"
jvfausto 0:76ea242a637f 649 if (totalRatePerSpad > 0xFFFF) { totalRatePerSpad = 0xFFFF; }
jvfausto 0:76ea242a637f 650
jvfausto 0:76ea242a637f 651 // "shift up to take advantage of 32 bits"
jvfausto 0:76ea242a637f 652 totalRatePerSpad <<= 16;
jvfausto 0:76ea242a637f 653
jvfausto 0:76ea242a637f 654 totalRatePerSpad /= spadCount;
jvfausto 0:76ea242a637f 655
jvfausto 0:76ea242a637f 656 if (totalRatePerSpad != 0)
jvfausto 0:76ea242a637f 657 {
jvfausto 0:76ea242a637f 658 // "get the target rate and shift up by 16"
jvfausto 0:76ea242a637f 659 uint32_t requiredSpads = ((uint32_t)TargetRate << 16) / totalRatePerSpad;
jvfausto 0:76ea242a637f 660
jvfausto 0:76ea242a637f 661 // "clip to 16 bit"
jvfausto 0:76ea242a637f 662 if (requiredSpads > 0xFFFF) { requiredSpads = 0xFFFF; }
jvfausto 0:76ea242a637f 663
jvfausto 0:76ea242a637f 664 // "override DSS config"
jvfausto 0:76ea242a637f 665 writeReg16Bit(DSS_CONFIG__MANUAL_EFFECTIVE_SPADS_SELECT, requiredSpads);
jvfausto 0:76ea242a637f 666 // DSS_CONFIG__ROI_MODE_CONTROL should already be set to REQUESTED_EFFFECTIVE_SPADS
jvfausto 0:76ea242a637f 667
jvfausto 0:76ea242a637f 668 return;
jvfausto 0:76ea242a637f 669 }
jvfausto 0:76ea242a637f 670 }
jvfausto 0:76ea242a637f 671
jvfausto 0:76ea242a637f 672 // If we reached this point, it means something above would have resulted in a
jvfausto 0:76ea242a637f 673 // divide by zero.
jvfausto 0:76ea242a637f 674 // "We want to gracefully set a spad target, not just exit with an error"
jvfausto 0:76ea242a637f 675
jvfausto 0:76ea242a637f 676 // "set target to mid point"
jvfausto 0:76ea242a637f 677 writeReg16Bit(DSS_CONFIG__MANUAL_EFFECTIVE_SPADS_SELECT, 0x8000);
jvfausto 0:76ea242a637f 678 }
jvfausto 0:76ea242a637f 679
jvfausto 0:76ea242a637f 680 // get range, status, rates from results buffer
jvfausto 0:76ea242a637f 681 // based on VL53L1_GetRangingMeasurementData()
jvfausto 0:76ea242a637f 682 void VL53L1X::getRangingData()
jvfausto 0:76ea242a637f 683 {
jvfausto 0:76ea242a637f 684 // VL53L1_copy_sys_and_core_results_to_range_results() begin
jvfausto 0:76ea242a637f 685
jvfausto 0:76ea242a637f 686 uint16_t range = results.final_crosstalk_corrected_range_mm_sd0;
jvfausto 0:76ea242a637f 687
jvfausto 0:76ea242a637f 688 // "apply correction gain"
jvfausto 0:76ea242a637f 689 // gain factor of 2011 is tuning parm default (VL53L1_TUNINGPARM_LITE_RANGING_GAIN_FACTOR_DEFAULT)
jvfausto 0:76ea242a637f 690 // Basically, this appears to scale the result by 2011/2048, or about 98%
jvfausto 0:76ea242a637f 691 // (with the 1024 added for proper rounding).
jvfausto 0:76ea242a637f 692 ranging_data.range_mm = ((uint32_t)range * 2011 + 0x0400) / 0x0800;
cpbenite 1:67ced5a2c689 693 printf("Range Status: ");
jvfausto 0:76ea242a637f 694 // VL53L1_copy_sys_and_core_results_to_range_results() end
jvfausto 0:76ea242a637f 695
jvfausto 0:76ea242a637f 696 // set range_status in ranging_data based on value of RESULT__RANGE_STATUS register
jvfausto 0:76ea242a637f 697 // mostly based on ConvertStatusLite()
jvfausto 0:76ea242a637f 698 switch(results.range_status)
jvfausto 0:76ea242a637f 699 {
jvfausto 0:76ea242a637f 700 case 17: // MULTCLIPFAIL
jvfausto 0:76ea242a637f 701 case 2: // VCSELWATCHDOGTESTFAILURE
jvfausto 0:76ea242a637f 702 case 1: // VCSELCONTINUITYTESTFAILURE
jvfausto 0:76ea242a637f 703 case 3: // NOVHVVALUEFOUND
jvfausto 0:76ea242a637f 704 // from SetSimpleData()
jvfausto 0:76ea242a637f 705 ranging_data.range_status = HardwareFail;
cpbenite 1:67ced5a2c689 706 printf("HardwareFail\n");
jvfausto 0:76ea242a637f 707 break;
jvfausto 0:76ea242a637f 708
jvfausto 0:76ea242a637f 709 case 13: // USERROICLIP
jvfausto 0:76ea242a637f 710 // from SetSimpleData()
jvfausto 0:76ea242a637f 711 ranging_data.range_status = MinRangeFail;
cpbenite 1:67ced5a2c689 712 printf("MinRangeFail\n");
jvfausto 0:76ea242a637f 713 break;
jvfausto 0:76ea242a637f 714
jvfausto 0:76ea242a637f 715 case 18: // GPHSTREAMCOUNT0READY
jvfausto 0:76ea242a637f 716 ranging_data.range_status = SynchronizationInt;
cpbenite 1:67ced5a2c689 717 printf("SynchronizationInt\n");
jvfausto 0:76ea242a637f 718 break;
jvfausto 0:76ea242a637f 719
jvfausto 0:76ea242a637f 720 case 5: // RANGEPHASECHECK
jvfausto 0:76ea242a637f 721 ranging_data.range_status = OutOfBoundsFail;
cpbenite 1:67ced5a2c689 722 printf("OutofBoundsFail\n");
jvfausto 0:76ea242a637f 723 break;
jvfausto 0:76ea242a637f 724
jvfausto 0:76ea242a637f 725 case 4: // MSRCNOTARGET
jvfausto 0:76ea242a637f 726 ranging_data.range_status = SignalFail;
cpbenite 1:67ced5a2c689 727 printf("SignalFail\n");
jvfausto 0:76ea242a637f 728 break;
jvfausto 0:76ea242a637f 729
jvfausto 0:76ea242a637f 730 case 6: // SIGMATHRESHOLDCHECK
jvfausto 0:76ea242a637f 731 ranging_data.range_status = SignalFail;
cpbenite 1:67ced5a2c689 732 printf("SignalFail\n");
jvfausto 0:76ea242a637f 733 break;
jvfausto 0:76ea242a637f 734
jvfausto 0:76ea242a637f 735 case 7: // PHASECONSISTENCY
jvfausto 0:76ea242a637f 736 ranging_data.range_status = WrapTargetFail;
cpbenite 1:67ced5a2c689 737 printf("WrapTargetFail\n");
jvfausto 0:76ea242a637f 738 break;
jvfausto 0:76ea242a637f 739
jvfausto 0:76ea242a637f 740 case 12: // RANGEIGNORETHRESHOLD
jvfausto 0:76ea242a637f 741 ranging_data.range_status = XtalkSignalFail;
cpbenite 1:67ced5a2c689 742 printf("XtalkSignalFail\n");
jvfausto 0:76ea242a637f 743 break;
jvfausto 0:76ea242a637f 744
jvfausto 0:76ea242a637f 745 case 8: // MINCLIP
jvfausto 0:76ea242a637f 746 ranging_data.range_status = RangeValidMinRangeClipped;
cpbenite 1:67ced5a2c689 747 printf("Range Valid Min Range Clipped\n");
jvfausto 0:76ea242a637f 748 break;
jvfausto 0:76ea242a637f 749
jvfausto 0:76ea242a637f 750 case 9: // RANGECOMPLETE
jvfausto 0:76ea242a637f 751 // from VL53L1_copy_sys_and_core_results_to_range_results()
jvfausto 0:76ea242a637f 752 if (results.stream_count == 0)
jvfausto 0:76ea242a637f 753 {
jvfausto 0:76ea242a637f 754 ranging_data.range_status = RangeValidNoWrapCheckFail;
cpbenite 1:67ced5a2c689 755 printf("Range Valid No Wrap Check Fail \n");
jvfausto 0:76ea242a637f 756 }
jvfausto 0:76ea242a637f 757 else
jvfausto 0:76ea242a637f 758 {
jvfausto 0:76ea242a637f 759 ranging_data.range_status = RangeValid;
cpbenite 1:67ced5a2c689 760 printf("Range Valid\n");
jvfausto 0:76ea242a637f 761 }
jvfausto 0:76ea242a637f 762 break;
jvfausto 0:76ea242a637f 763
jvfausto 0:76ea242a637f 764 default:
jvfausto 0:76ea242a637f 765 ranging_data.range_status = None;
cpbenite 1:67ced5a2c689 766 printf("None\n");
jvfausto 0:76ea242a637f 767 }
jvfausto 0:76ea242a637f 768
jvfausto 0:76ea242a637f 769 // from SetSimpleData()
jvfausto 0:76ea242a637f 770 ranging_data.peak_signal_count_rate_MCPS =
jvfausto 0:76ea242a637f 771 countRateFixedToFloat(results.peak_signal_count_rate_crosstalk_corrected_mcps_sd0);
jvfausto 0:76ea242a637f 772 ranging_data.ambient_count_rate_MCPS =
jvfausto 0:76ea242a637f 773 countRateFixedToFloat(results.ambient_count_rate_mcps_sd0);
jvfausto 0:76ea242a637f 774 }
jvfausto 0:76ea242a637f 775
jvfausto 0:76ea242a637f 776 // Decode sequence step timeout in MCLKs from register value
jvfausto 0:76ea242a637f 777 // based on VL53L1_decode_timeout()
jvfausto 0:76ea242a637f 778 uint32_t VL53L1X::decodeTimeout(uint16_t reg_val)
jvfausto 0:76ea242a637f 779 {
jvfausto 0:76ea242a637f 780 return ((uint32_t)(reg_val & 0xFF) << (reg_val >> 8)) + 1;
jvfausto 0:76ea242a637f 781 }
jvfausto 0:76ea242a637f 782
jvfausto 0:76ea242a637f 783 // Encode sequence step timeout register value from timeout in MCLKs
jvfausto 0:76ea242a637f 784 // based on VL53L1_encode_timeout()
jvfausto 0:76ea242a637f 785 uint16_t VL53L1X::encodeTimeout(uint32_t timeout_mclks)
jvfausto 0:76ea242a637f 786 {
jvfausto 0:76ea242a637f 787 // encoded format: "(LSByte * 2^MSByte) + 1"
jvfausto 0:76ea242a637f 788
jvfausto 0:76ea242a637f 789 uint32_t ls_byte = 0;
jvfausto 0:76ea242a637f 790 uint16_t ms_byte = 0;
jvfausto 0:76ea242a637f 791
jvfausto 0:76ea242a637f 792 if (timeout_mclks > 0)
jvfausto 0:76ea242a637f 793 {
jvfausto 0:76ea242a637f 794 ls_byte = timeout_mclks - 1;
jvfausto 0:76ea242a637f 795
jvfausto 0:76ea242a637f 796 while ((ls_byte & 0xFFFFFF00) > 0)
jvfausto 0:76ea242a637f 797 {
jvfausto 0:76ea242a637f 798 ls_byte >>= 1;
jvfausto 0:76ea242a637f 799 ms_byte++;
jvfausto 0:76ea242a637f 800 }
jvfausto 0:76ea242a637f 801
jvfausto 0:76ea242a637f 802 return (ms_byte << 8) | (ls_byte & 0xFF);
jvfausto 0:76ea242a637f 803 }
jvfausto 0:76ea242a637f 804 else { return 0; }
jvfausto 0:76ea242a637f 805 }
jvfausto 0:76ea242a637f 806
jvfausto 0:76ea242a637f 807 // Convert sequence step timeout from macro periods to microseconds with given
jvfausto 0:76ea242a637f 808 // macro period in microseconds (12.12 format)
jvfausto 0:76ea242a637f 809 // based on VL53L1_calc_timeout_us()
jvfausto 0:76ea242a637f 810 uint32_t VL53L1X::timeoutMclksToMicroseconds(uint32_t timeout_mclks, uint32_t macro_period_us)
jvfausto 0:76ea242a637f 811 {
jvfausto 0:76ea242a637f 812 return ((uint64_t)timeout_mclks * macro_period_us + 0x800) >> 12;
jvfausto 0:76ea242a637f 813 }
jvfausto 0:76ea242a637f 814
jvfausto 0:76ea242a637f 815 // Convert sequence step timeout from microseconds to macro periods with given
jvfausto 0:76ea242a637f 816 // macro period in microseconds (12.12 format)
jvfausto 0:76ea242a637f 817 // based on VL53L1_calc_timeout_mclks()
jvfausto 0:76ea242a637f 818 uint32_t VL53L1X::timeoutMicrosecondsToMclks(uint32_t timeout_us, uint32_t macro_period_us)
jvfausto 0:76ea242a637f 819 {
jvfausto 0:76ea242a637f 820 return (((uint32_t)timeout_us << 12) + (macro_period_us >> 1)) / macro_period_us;
jvfausto 0:76ea242a637f 821 }
jvfausto 0:76ea242a637f 822
jvfausto 0:76ea242a637f 823 // Calculate macro period in microseconds (12.12 format) with given VCSEL period
jvfausto 0:76ea242a637f 824 // assumes fast_osc_frequency has been read and stored
jvfausto 0:76ea242a637f 825 // based on VL53L1_calc_macro_period_us()
jvfausto 0:76ea242a637f 826 uint32_t VL53L1X::calcMacroPeriod(uint8_t vcsel_period)
jvfausto 0:76ea242a637f 827 {
jvfausto 0:76ea242a637f 828 // from VL53L1_calc_pll_period_us()
jvfausto 0:76ea242a637f 829 // fast osc frequency in 4.12 format; PLL period in 0.24 format
jvfausto 0:76ea242a637f 830 uint32_t pll_period_us = ((uint32_t)0x01 << 30) / fast_osc_frequency;
jvfausto 0:76ea242a637f 831
jvfausto 0:76ea242a637f 832 // from VL53L1_decode_vcsel_period()
jvfausto 0:76ea242a637f 833 uint8_t vcsel_period_pclks = (vcsel_period + 1) << 1;
jvfausto 0:76ea242a637f 834
jvfausto 0:76ea242a637f 835 // VL53L1_MACRO_PERIOD_VCSEL_PERIODS = 2304
jvfausto 0:76ea242a637f 836 uint32_t macro_period_us = (uint32_t)2304 * pll_period_us;
jvfausto 0:76ea242a637f 837 macro_period_us >>= 6;
jvfausto 0:76ea242a637f 838 macro_period_us *= vcsel_period_pclks;
jvfausto 0:76ea242a637f 839 macro_period_us >>= 6;
jvfausto 0:76ea242a637f 840
jvfausto 0:76ea242a637f 841 return macro_period_us;
jvfausto 0:76ea242a637f 842 }