Diff: targets/TARGET_NXP/TARGET_LPC43XX/spi_api.c

Revision:

149:156823d33999

Parent:

144:ef7eb2e8f9f7

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/targets/TARGET_NXP/TARGET_LPC43XX/spi_api.c	Fri Oct 28 11:17:30 2016 +0100
@@ -0,0 +1,214 @@
+/* mbed Microcontroller Library
+ * Copyright (c) 2006-2013 ARM Limited
+ *
+ * Licensed under the Apache License, Version 2.0 (the "License");
+ * you may not use this file except in compliance with the License.
+ * You may obtain a copy of the License at
+ *
+ *     http://www.apache.org/licenses/LICENSE-2.0
+ *
+ * Unless required by applicable law or agreed to in writing, software
+ * distributed under the License is distributed on an "AS IS" BASIS,
+ * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+ * See the License for the specific language governing permissions and
+ * limitations under the License.
+ *
+ * Ported to NXP LPC43XX by Micromint USA <support@micromint.com>
+ */
+#include "mbed_assert.h"
+#include <math.h>
+
+#include "spi_api.h"
+#include "cmsis.h"
+#include "pinmap.h"
+#include "mbed_error.h"
+
+// SCU mode for SPI pins
+#define SCU_PINIO_SPI       SCU_PINIO_FAST
+
+static const PinMap PinMap_SPI_SCLK[] = {
+    {P1_19, SPI_1, (SCU_PINIO_SPI | 1)},
+    {P3_0,  SPI_0, (SCU_PINIO_SPI | 4)},
+    {P3_3,  SPI_0, (SCU_PINIO_SPI | 2)},
+    {PF_0,  SPI_0, (SCU_PINIO_SPI | 0)},
+    {PF_4,  SPI_1, (SCU_PINIO_SPI | 0)},
+    {NC,    NC,    0}
+};
+
+static const PinMap PinMap_SPI_MOSI[] = {
+    {P0_1,  SPI_1, (SCU_PINIO_SPI | 1)},
+    {P1_2,  SPI_0, (SCU_PINIO_SPI | 5)},
+    {P1_4,  SPI_1, (SCU_PINIO_SPI | 5)},
+    {P3_7,  SPI_0, (SCU_PINIO_SPI | 5)},
+    {P3_8,  SPI_0, (SCU_PINIO_SPI | 2)},
+    {P9_2,  SPI_0, (SCU_PINIO_SPI | 7)},
+    {PF_3,  SPI_0, (SCU_PINIO_SPI | 2)},
+    {PF_7,  SPI_1, (SCU_PINIO_SPI | 2)},
+    {NC,    NC,    0}
+};
+
+static const PinMap PinMap_SPI_MISO[] = {
+    {P0_0,  SPI_1, (SCU_PINIO_SPI | 1)},
+    {P1_1,  SPI_0, (SCU_PINIO_SPI | 5)},
+    {P1_3,  SPI_1, (SCU_PINIO_SPI | 5)},
+    {P3_6,  SPI_0, (SCU_PINIO_SPI | 5)},
+    {P3_7,  SPI_0, (SCU_PINIO_SPI | 2)},
+    {P9_1,  SPI_0, (SCU_PINIO_SPI | 7)},
+    {PF_2,  SPI_0, (SCU_PINIO_SPI | 2)},
+    {PF_6,  SPI_1, (SCU_PINIO_SPI | 2)},
+    {NC,    NC,    0}
+};
+
+static const PinMap PinMap_SPI_SSEL[] = {
+    {P1_0,  SPI_0, (SCU_PINIO_SPI | 5)},
+    {P1_5,  SPI_1, (SCU_PINIO_SPI | 5)},
+    {P1_20, SPI_1, (SCU_PINIO_SPI | 2)},
+    {P3_6,  SPI_0, (SCU_PINIO_SPI | 2)},
+    {P3_8,  SPI_0, (SCU_PINIO_SPI | 5)},
+    {P9_0,  SPI_0, (SCU_PINIO_SPI | 7)},
+    {PF_1,  SPI_0, (SCU_PINIO_SPI | 2)},
+    {PF_5,  SPI_1, (SCU_PINIO_SPI | 2)},
+    {NC,    NC,    0}
+};
+
+static inline int ssp_disable(spi_t *obj);
+static inline int ssp_enable(spi_t *obj);
+
+void spi_init(spi_t *obj, PinName mosi, PinName miso, PinName sclk, PinName ssel) {
+    // determine the SPI to use
+    SPIName spi_mosi = (SPIName)pinmap_peripheral(mosi, PinMap_SPI_MOSI);
+    SPIName spi_miso = (SPIName)pinmap_peripheral(miso, PinMap_SPI_MISO);
+    SPIName spi_sclk = (SPIName)pinmap_peripheral(sclk, PinMap_SPI_SCLK);
+    SPIName spi_ssel = (SPIName)pinmap_peripheral(ssel, PinMap_SPI_SSEL);
+    SPIName spi_data = (SPIName)pinmap_merge(spi_mosi, spi_miso);
+    SPIName spi_cntl = (SPIName)pinmap_merge(spi_sclk, spi_ssel);
+
+    obj->spi = (LPC_SSP_T*)pinmap_merge(spi_data, spi_cntl);
+    MBED_ASSERT((int)obj->spi != NC);
+    
+    // enable clocking
+    switch ((int)obj->spi) {
+        case SPI_0: LPC_CGU->BASE_CLK[CLK_BASE_SSP0] = (1 << 11) | (CLKIN_MAINPLL << 24); break;
+        case SPI_1: LPC_CGU->BASE_CLK[CLK_BASE_SSP1] = (1 << 11) | (CLKIN_MAINPLL << 24); break;
+    }
+    
+    // pin out the spi pins
+    pinmap_pinout(mosi, PinMap_SPI_MOSI);
+    pinmap_pinout(miso, PinMap_SPI_MISO);
+    pinmap_pinout(sclk, PinMap_SPI_SCLK);
+    if (ssel != NC) {
+        pinmap_pinout(ssel, PinMap_SPI_SSEL);
+    }
+}
+
+void spi_free(spi_t *obj) {}
+
+void spi_format(spi_t *obj, int bits, int mode, int slave) {
+    MBED_ASSERT(((bits >= 4) && (bits <= 16)) || ((mode >= 0) && (mode <= 3)));
+    ssp_disable(obj);
+    
+    int polarity = (mode & 0x2) ? 1 : 0;
+    int phase = (mode & 0x1) ? 1 : 0;
+    
+    // set it up
+    int DSS = bits - 1;            // DSS (data select size)
+    int SPO = (polarity) ? 1 : 0;  // SPO - clock out polarity
+    int SPH = (phase) ? 1 : 0;     // SPH - clock out phase
+    
+    int FRF = 0;                   // FRF (frame format) = SPI
+    uint32_t tmp = obj->spi->CR0;
+    tmp &= ~(0xFFFF);
+    tmp |= DSS << 0
+        | FRF << 4
+        | SPO << 6
+        | SPH << 7;
+    obj->spi->CR0 = tmp;
+    
+    tmp = obj->spi->CR1;
+    tmp &= ~(0xD);
+    tmp |= 0 << 0                   // LBM - loop back mode - off
+        | ((slave) ? 1 : 0) << 2   // MS - master slave mode, 1 = slave
+        | 0 << 3;                  // SOD - slave output disable - na
+    obj->spi->CR1 = tmp;
+    ssp_enable(obj);
+}
+
+void spi_frequency(spi_t *obj, int hz) {
+    ssp_disable(obj);
+    
+    uint32_t PCLK = SystemCoreClock;
+    
+    int prescaler;
+    
+    for (prescaler = 2; prescaler <= 254; prescaler += 2) {
+        int prescale_hz = PCLK / prescaler;
+        
+        // calculate the divider
+        int divider = floor(((float)prescale_hz / (float)hz) + 0.5f);
+        
+        // check we can support the divider
+        if (divider < 256) {
+            // prescaler
+            obj->spi->CPSR = prescaler;
+            
+            // divider
+            obj->spi->CR0 &= ~(0xFFFF << 8);
+            obj->spi->CR0 |= (divider - 1) << 8;
+            ssp_enable(obj);
+            return;
+        }
+    }
+    error("Couldn't setup requested SPI frequency");
+}
+
+static inline int ssp_disable(spi_t *obj) {
+    return obj->spi->CR1 &= ~(1 << 1);
+}
+
+static inline int ssp_enable(spi_t *obj) {
+    return obj->spi->CR1 |= (1 << 1);
+}
+
+static inline int ssp_readable(spi_t *obj) {
+    return obj->spi->SR & (1 << 2);
+}
+
+static inline int ssp_writeable(spi_t *obj) {
+    return obj->spi->SR & (1 << 1);
+}
+
+static inline void ssp_write(spi_t *obj, int value) {
+    while (!ssp_writeable(obj));
+    obj->spi->DR = value;
+}
+
+static inline int ssp_read(spi_t *obj) {
+    while (!ssp_readable(obj));
+    return obj->spi->DR;
+}
+
+static inline int ssp_busy(spi_t *obj) {
+    return (obj->spi->SR & (1 << 4)) ? (1) : (0);
+}
+
+int spi_master_write(spi_t *obj, int value) {
+    ssp_write(obj, value);
+    return ssp_read(obj);
+}
+
+int spi_slave_receive(spi_t *obj) {
+    return (ssp_readable(obj) && !ssp_busy(obj)) ? (1) : (0);
+}
+
+int spi_slave_read(spi_t *obj) {
+    return obj->spi->DR;
+}
+
+void spi_slave_write(spi_t *obj, int value) {
+    while (ssp_writeable(obj) == 0) ;
+    obj->spi->DR = value;
+}
+
+int spi_busy(spi_t *obj) {
+    return ssp_busy(obj);
+}