Taking photo using GR-LYCHEE through Pelion Device Management.
This firmware project works for GR-LYCHEE and GR-PEACH.
Steps to build this firmware with Mbed CLI
Import project
$ mbed import http://os.mbed.com/users/coisme/code/Pelion-GR-LYCHEE-camera-firmware/
Setting
- Ethernet (GR-PEACH only)
- Change the file name
mbed_app.RZ_A1H_Ethernet.json
tombed_app.json
- Change the file name
- Wi-Fi
- Change the Wi-Fi setting in
mbed_app.json
, i.e.nsapi.default-wifi-ssid
andnsapi.default-wifi-password
- Change the Wi-Fi setting in
If you haven't set your Pelion API key, run the following command.
$ mbed config -G CLOUD_SDK_API_KEY <API_KEY>
Setting for Pelion Device Management
$ mbed dm init -d "example.com" --model-name "PELION_DEMO" -q --force
Compile
For GR-LYCHEE:
$ mbed compile -t GCC_ARM -m GR_LYCHEE
For GR-PEACH:
$ mbed compile -t GCC_ARM -m RZ_A1H
Write the created .bin
file to your GR-LYCHEE/PEACH.
That's it! :-)
LED Status Indicator
LEDs next to UB0 show the status of your GR-LYCHEE/PEACH.
LED# | GR-LYCHEE | GR-PEACH | Status | Description |
---|---|---|---|---|
LED1 | green | red | Normal | Turned on after the device is registered to Pelion Device Management successfully. |
LED2 | yellow | green | Error | Turned on when the network initialization failed. Check your Wi-Fi setting. |
LED3 | orange | blue | Error | Turned on when the Pelion Device Management Client initialization failed. Check your SD card. |
LED4 | red | red | Error | Turned on when the network is disconnected. Check your Wi-Fi network status. |
Clear device identity
If you want to clear the device's identity, connect to the device via serial terminal. Then input r
command. The device flushes the identity storage, then reboot.
Known Issues
client_error(6) -> Client in reconnection mode NetworkError
appears when connecting to network, but eventually connection will be established.- Warning message
"MBEDTLS_TEST_NULL_ENTROPY has been enabled. This configuration is not secure and is not suitable for production use"
appears when compiling the project for GR-PEACH. This can be ignored in development stage.
drivers/storage/MySystemStorage.cpp
- Committer:
- Osamu Koizumi
- Date:
- 2019-04-10
- Revision:
- 14:0480150782c8
- Parent:
- 0:6d2053b84a92
File content as of revision 14:0480150782c8:
/* * Copyright (c) 2018 ARM Limited. All rights reserved. * SPDX-License-Identifier: Apache-2.0 * Licensed under the Apache License, Version 2.0 (the License); you may * not use this file except in compliance with the License. * You may obtain a copy of the License at * * http://www.apache.org/licenses/LICENSE-2.0 * * Unless required by applicable law or agreed to in writing, software * distributed under the License is distributed on an AS IS BASIS, WITHOUT * WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. * See the License for the specific language governing permissions and * limitations under the License. */ #include "BlockDevice.h" #include "FileSystem.h" #include "FATFileSystem.h" #include "LittleFileSystem.h" #if COMPONENT_SPIF #include "SPIFBlockDevice.h" #endif #if COMPONENT_QSPIF #include "QSPIFBlockDevice.h" #endif #if COMPONENT_DATAFLASH #include "DataFlashBlockDevice.h" #endif #if COMPONENT_SD #include "SDBlockDevice.h" #endif #if COMPONENT_FLASHIAP #include "FlashIAPBlockDevice.h" #endif #if COMPONENT_NUSD #include "NuSDBlockDevice.h" #endif using namespace mbed; // Align a value to a specified size. // Parameters : // val - [IN] Value. // size - [IN] Size. // Return : Aligned value. static inline uint32_t align_up(uint32_t val, uint32_t size) { return (((val - 1) / size) + 1) * size; } BlockDevice *BlockDevice::get_default_instance() { #if COMPONENT_SPIF static SPIFBlockDevice default_bd( MBED_CONF_SPIF_DRIVER_SPI_MOSI, MBED_CONF_SPIF_DRIVER_SPI_MISO, MBED_CONF_SPIF_DRIVER_SPI_CLK, MBED_CONF_SPIF_DRIVER_SPI_CS, MBED_CONF_SPIF_DRIVER_SPI_FREQ ); return &default_bd; #elif COMPONENT_QSPIF static QSPIFBlockDevice default_bd( MBED_CONF_QSPIF_QSPI_IO0, MBED_CONF_QSPIF_QSPI_IO1, MBED_CONF_QSPIF_QSPI_IO2, MBED_CONF_QSPIF_QSPI_IO3, MBED_CONF_QSPIF_QSPI_SCK, MBED_CONF_QSPIF_QSPI_CSN, MBED_CONF_QSPIF_QSPI_POLARITY_MODE, MBED_CONF_QSPIF_QSPI_FREQ ); return &default_bd; #elif COMPONENT_DATAFLASH static DataFlashBlockDevice default_bd( MBED_CONF_DATAFLASH_SPI_MOSI, MBED_CONF_DATAFLASH_SPI_MISO, MBED_CONF_DATAFLASH_SPI_CLK, MBED_CONF_DATAFLASH_SPI_CS ); return &default_bd; #elif COMPONENT_SD static SDBlockDevice default_bd( MBED_CONF_SD_SPI_MOSI, MBED_CONF_SD_SPI_MISO, MBED_CONF_SD_SPI_CLK, MBED_CONF_SD_SPI_CS ); return &default_bd; #elif COMPONENT_NUSD static NuSDBlockDevice default_bd; return &default_bd; #elif COMPONENT_FLASHIAP #if (MBED_CONF_FLASHIAP_BLOCK_DEVICE_SIZE == 0) && (MBED_CONF_FLASHIAP_BLOCK_DEVICE_BASE_ADDRESS == 0xFFFFFFFF) size_t flash_size; uint32_t start_address; uint32_t bottom_address; FlashIAP flash; int ret = flash.init(); if (ret != 0) { return 0; } //Find the start of first sector after text area bottom_address = align_up(FLASHIAP_ROM_END, flash.get_sector_size(FLASHIAP_ROM_END)); start_address = flash.get_flash_start(); flash_size = flash.get_flash_size(); ret = flash.deinit(); static FlashIAPBlockDevice default_bd(bottom_address, start_address + flash_size - bottom_address); #else static FlashIAPBlockDevice default_bd; #endif return &default_bd; #else return NULL; #endif } FileSystem *FileSystem::get_default_instance() { #if COMPONENT_SPIF || COMPONENT_QSPIF || COMPONENT_DATAFLASH || COMPONENT_NUSD static LittleFileSystem flash("flash", BlockDevice::get_default_instance()); flash.set_as_default(); return &flash; #elif COMPONENT_SD static FATFileSystem sdcard("sd", BlockDevice::get_default_instance()); sdcard.set_as_default(); return &sdcard; #elif COMPONENT_FLASHIAP static LittleFileSystem flash("flash", BlockDevice::get_default_instance()); flash.set_as_default(); return &flash; #else return NULL; #endif }