![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
Communication between TSL3301 and F7 board
main.cpp
- Committer:
- codebreaker7
- Date:
- 2018-03-06
- Revision:
- 0:96ad87d71144
- Child:
- 1:979d4820e32a
File content as of revision 0:96ad87d71144:
#include "mbed.h" DigitalIn miso(D8); DigitalOut mosi(D7); DigitalOut clk(D6); unsigned char lcam_buffer[102]; void lcam_pulse(void) { clk = 1; clk = 0; } void lcam_pulse_clock(uint8_t times){ for(unsigned char i = 0; i < times; i++) { lcam_pulse(); } } void lcam_send(uint8_t value){ // Start bit mosi = 0; lcam_pulse(); // Send 8 bits to camera for(unsigned char i = 0; i < 8; i++) { mosi = ((value >> i) & 1); lcam_pulse(); } // Stop bit mosi = 1; lcam_pulse(); } void lcam_reset(void){ wait_ms(1); // 10 clock impulsions with SDIN held high to clear the receiver logic mosi = 1; lcam_pulse_clock(10); // 3 reset instructions to clear the control logic lcam_send(0x1b); lcam_send(0x1b); lcam_send(0x1b); // 30 clock impulsions to assure the state of SDOUT lcam_pulse_clock(30); // register write mode lcam_send(0X5F); // Clear mode register (single chip, not sleep) lcam_send(0x00); } void lcam_setup(void){ lcam_reset(); // set inputs and outputs //clk = 1; //pin_mode(LCAM_PORT, LCAM_SDIN, 1); //pin_mode(LCAM_PORT, LCAM_SDOUT, 0); // make sure the clock is cleared clk = 0; // Left offset lcam_send(0x40); lcam_send(0); // Left gain lcam_send(0x41); lcam_send(15); // Middle offset lcam_send(0x42); lcam_send(0); // Middle gain lcam_send(0x43); lcam_send(15); // Right offset lcam_send(0x44); lcam_send(0); // Right gain lcam_send(0x45); lcam_send(15); } void lcam_startintegration(void){ // Send start integration command lcam_send(0x08); // delayed until the pixel reset cycle has been completed (22-clock delay) lcam_pulse_clock(22); } void lcam_endintegration(void){ // Sample int command lcam_send(0x10); // pixel reset sequence is initiated, requires 22 clocks lcam_pulse_clock(22); } void lcam_integrate(unsigned int microseconds){ lcam_startintegration(); wait_us(microseconds); lcam_endintegration(); } unsigned char* lcam_getdata(void){ return lcam_buffer; } void lcam_read(void){ unsigned char i, pixel_bit, pixel; // Read pixel command lcam_send(0x02); // 44-clock cycle delay until the first pixel data is output lcam_pulse_clock(44); // Read the 102 pixels from the camera for(i = 0; i < 102; i++) { pixel = 0; // pulse the pixel start bit (SDOUT = 0) lcam_pulse(); // read a byte, bit by bit for(pixel_bit = 0; pixel_bit < 8; pixel_bit++) { clk = 1; // read pin while clock is at 1 pixel |= (((miso) & 1) << pixel_bit); clk = 0; } // store byte to buffer lcam_buffer[i] = pixel; // pulse the pixel stop bit (SDOUT = 1) lcam_pulse(); } } unsigned char lcam_getpic(void){ } int main() { while(1) { } }