Diff: C12832_lcd.cpp

Revision:

7:0f5a3b0f3cab

Parent:

3:468cdccff7af

Child:

8:c9afe58d786a

--- a/C12832_lcd.cpp	Wed Dec 05 21:43:17 2012 +0000
+++ b/C12832_lcd.cpp	Fri Dec 21 20:43:59 2012 +0000
@@ -14,7 +14,8 @@
 
 // 13.10.12    initial design
 // 25.10.12    add autorefresh of screen
-// 25.10.12    add standart font 
+// 25.10.12    add standart font
+// 20.12.12    add bitmap graphics
 
 // optional defines :
 // #define debug_lcd  1
@@ -106,7 +107,7 @@
 #else
     _spi.write(cmd);
 #endif
-_CS = 1;
+    _CS = 1;
 }
 
 // write data to lcd controller
@@ -159,7 +160,7 @@
 
     wr_cmd(0xA6);     // display normal
 
-    
+
 #if defined TARGET_LPC1768          //setup DMA channel 0       
     LPC_SC->PCONP |= (1UL << 29);   // Power up the GPDMA
     LPC_GPDMA->DMACConfig = 1;      // enable DMA controller
@@ -173,7 +174,7 @@
     auto_up = 1;              // switch on auto update
     claim(stdout);           // redirekt printf to lcd
     locate(0,0);
-    set_font((unsigned char*)Small_7);  // standart font 
+    set_font((unsigned char*)Small_7);  // standart font
 }
 
 // set one pixel in buffer
@@ -198,7 +199,7 @@
 
 void C12832_LCD::copy_to_lcd(void)
 {
-#ifndef TARGET_LPC1768 
+#ifndef TARGET_LPC1768
     int i;
 #endif
     //page 0
@@ -206,7 +207,7 @@
     wr_cmd(0x10);      // set column hi  nibble 0
     wr_cmd(0xB0);      // set page address  0
     _A0 = 1;
-#if defined TARGET_LPC1768     
+#if defined TARGET_LPC1768
     _CS = 0;
     // start 128 byte DMA transfer to SPI1
     LPC_GPDMACH0->DMACCDestAddr = (uint32_t)&LPC_SSP1->DR; // we send to SSP1
@@ -223,17 +224,17 @@
     } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI1 not idle
     _CS = 1;
 #else  // no DMA
-    for(i=0;i<128;i++){
+    for(i=0; i<128; i++) {
         wr_dat(buffer[i]);
-        }
-#endif 
+    }
+#endif
 
     // page 1
     wr_cmd(0x00);      // set column low nibble 0
     wr_cmd(0x10);      // set column hi  nibble 0
     wr_cmd(0xB1);      // set page address  1
     _A0 = 1;
-#if defined TARGET_LPC1768         
+#if defined TARGET_LPC1768
     _CS = 0;
     // start 128 byte DMA transfer to SPI1
     LPC_GPDMA->DMACIntTCClear = 0x1;
@@ -248,17 +249,17 @@
     } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI1 not idle
     _CS = 1;
 #else // no DMA
-    for(i=128;i<256;i++){
+    for(i=128; i<256; i++) {
         wr_dat(buffer[i]);
-        }
-#endif     
+    }
+#endif
 
     //page 2
     wr_cmd(0x00);      // set column low nibble 0
     wr_cmd(0x10);      // set column hi  nibble 0
     wr_cmd(0xB2);      // set page address  2
     _A0 = 1;
-#if defined TARGET_LPC1768      
+#if defined TARGET_LPC1768
     _CS = 0;
     // start 128 byte DMA transfer to SPI1
     LPC_GPDMA->DMACIntTCClear = 0x1;
@@ -273,19 +274,19 @@
     } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI1 not idle
     _CS = 1;
 #else // no DMA
-    for(i=256;i<384;i++){
+    for(i=256; i<384; i++) {
         wr_dat(buffer[i]);
-        }
-#endif         
+    }
+#endif
 
     //page 3
     wr_cmd(0x00);      // set column low nibble 0
     wr_cmd(0x10);      // set column hi  nibble 0
     wr_cmd(0xB3);      // set page address  3
     _A0 = 1;
-    
-     _CS = 0;
-#if defined TARGET_LPC1768     
+
+    _CS = 0;
+#if defined TARGET_LPC1768
     // start 128 byte DMA transfer to SPI1
     LPC_GPDMA->DMACIntTCClear = 0x1;
     LPC_GPDMA->DMACIntErrClr = 0x1;
@@ -299,10 +300,10 @@
     } while ((LPC_SSP1->SR & 0x10) == 0x10); // SPI1 not idle
     _CS = 1;
 #else // no DMA
-    for(i=384;i<512;i++){
+    for(i=384; i<512; i++) {
         wr_dat(buffer[i]);
-        }
-#endif   
+    }
+#endif
 }
 
 void C12832_LCD::cls(void)
@@ -541,7 +542,7 @@
     for (i = 0; i <= r; i++)
         circle(x,y,i,color);
     auto_up = up;
-    if(auto_up) copy_to_lcd();  
+    if(auto_up) copy_to_lcd();
 }
 
 void C12832_LCD::setmode(int mode)
@@ -638,8 +639,30 @@
     if(up ) auto_up = 1;
 }
 
-unsigned int C12832_LCD::get_auto_up(void){
+unsigned int C12832_LCD::get_auto_up(void)
+{
     return (auto_up);
 }
 
+void C12832_LCD::print_bm(Bitmap bm, int x, int y)
+{
+    int h,v,b;
+    char d;
 
+    for(v=0; v < bm.ySize; v++) {   // lines
+        for(h=0; h < bm.xSize; h++) { // pixel
+            if(h + x > 127) break;
+            if(v + y > 31) break;
+            d = bm.data[bm.Byte_in_Line * v + ((h & 0xF8) >> 3)];
+            b = 0x80 >> (h & 0x07);
+            if((d & b) == 0) {
+                pixel(x+h,y+v,0);
+            } else {
+                pixel(x+h,y+v,1);
+            }
+        }
+    }
+
+}
+
+