File content as of revision 111:d5a824cee1d3:

/* mbed Microcontroller Library
 * Copyright (c) 2006-2013 ARM Limited
 *
 * Licensed under the Apache License, Version 2.0 (the "License");
 * you may not use this file except in compliance with the License.
 * You may obtain a copy of the License at
 *
 *     http://www.apache.org/licenses/LICENSE-2.0
 *
 * Unless required by applicable law or agreed to in writing, software
 * distributed under the License is distributed on an "AS IS" BASIS,
 * WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
 * See the License for the specific language governing permissions and
 * limitations under the License.
 */


#ifndef __GATT_CHARACTERISTIC_H__
#define __GATT_CHARACTERISTIC_H__

#include "blecommon.h"
#include "UUID.h"

/**************************************************************************/
/*!
    \brief  GATT characteristic
*/
/**************************************************************************/
class GattCharacteristic
{
public:
    enum {
        UUID_BATTERY_LEVEL_STATE_CHAR                     = 0x2A1B,
        UUID_BATTERY_POWER_STATE_CHAR                     = 0x2A1A,
        UUID_REMOVABLE_CHAR                               = 0x2A3A,
        UUID_SERVICE_REQUIRED_CHAR                        = 0x2A3B,
        UUID_ALERT_CATEGORY_ID_CHAR                       = 0x2A43,
        UUID_ALERT_CATEGORY_ID_BIT_MASK_CHAR              = 0x2A42,
        UUID_ALERT_LEVEL_CHAR                             = 0x2A06,
        UUID_ALERT_NOTIFICATION_CONTROL_POINT_CHAR        = 0x2A44,
        UUID_ALERT_STATUS_CHAR                            = 0x2A3F,
        UUID_BATTERY_LEVEL_CHAR                           = 0x2A19,
        UUID_BLOOD_PRESSURE_FEATURE_CHAR                  = 0x2A49,
        UUID_BLOOD_PRESSURE_MEASUREMENT_CHAR              = 0x2A35,
        UUID_BODY_SENSOR_LOCATION_CHAR                    = 0x2A38,
        UUID_BOOT_KEYBOARD_INPUT_REPORT_CHAR              = 0x2A22,
        UUID_BOOT_KEYBOARD_OUTPUT_REPORT_CHAR             = 0x2A32,
        UUID_BOOT_MOUSE_INPUT_REPORT_CHAR                 = 0x2A33,
        UUID_CURRENT_TIME_CHAR                            = 0x2A2B,
        UUID_DATE_TIME_CHAR                               = 0x2A08,
        UUID_DAY_DATE_TIME_CHAR                           = 0x2A0A,
        UUID_DAY_OF_WEEK_CHAR                             = 0x2A09,
        UUID_DST_OFFSET_CHAR                              = 0x2A0D,
        UUID_EXACT_TIME_256_CHAR                          = 0x2A0C,
        UUID_FIRMWARE_REVISION_STRING_CHAR                = 0x2A26,
        UUID_GLUCOSE_FEATURE_CHAR                         = 0x2A51,
        UUID_GLUCOSE_MEASUREMENT_CHAR                     = 0x2A18,
        UUID_GLUCOSE_MEASUREMENT_CONTEXT_CHAR             = 0x2A34,
        UUID_HARDWARE_REVISION_STRING_CHAR                = 0x2A27,
        UUID_HEART_RATE_CONTROL_POINT_CHAR                = 0x2A39,
        UUID_HEART_RATE_MEASUREMENT_CHAR                  = 0x2A37,
        UUID_HID_CONTROL_POINT_CHAR                       = 0x2A4C,
        UUID_HID_INFORMATION_CHAR                         = 0x2A4A,
        UUID_IEEE_REGULATORY_CERTIFICATION_DATA_LIST_CHAR = 0x2A2A,
        UUID_INTERMEDIATE_CUFF_PRESSURE_CHAR              = 0x2A36,
        UUID_INTERMEDIATE_TEMPERATURE_CHAR                = 0x2A1E,
        UUID_LOCAL_TIME_INFORMATION_CHAR                  = 0x2A0F,
        UUID_MANUFACTURER_NAME_STRING_CHAR                = 0x2A29,
        UUID_MEASUREMENT_INTERVAL_CHAR                    = 0x2A21,
        UUID_MODEL_NUMBER_STRING_CHAR                     = 0x2A24,
        UUID_UNREAD_ALERT_CHAR                            = 0x2A45,
        UUID_NEW_ALERT_CHAR                               = 0x2A46,
        UUID_PNP_ID_CHAR                                  = 0x2A50,
        UUID_PROTOCOL_MODE_CHAR                           = 0x2A4E,
        UUID_RECORD_ACCESS_CONTROL_POINT_CHAR             = 0x2A52,
        UUID_REFERENCE_TIME_INFORMATION_CHAR              = 0x2A14,
        UUID_REPORT_CHAR                                  = 0x2A4D,
        UUID_REPORT_MAP_CHAR                              = 0x2A4B,
        UUID_RINGER_CONTROL_POINT_CHAR                    = 0x2A40,
        UUID_RINGER_SETTING_CHAR                          = 0x2A41,
        UUID_SCAN_INTERVAL_WINDOW_CHAR                    = 0x2A4F,
        UUID_SCAN_REFRESH_CHAR                            = 0x2A31,
        UUID_SERIAL_NUMBER_STRING_CHAR                    = 0x2A25,
        UUID_SOFTWARE_REVISION_STRING_CHAR                = 0x2A28,
        UUID_SUPPORTED_NEW_ALERT_CATEGORY_CHAR            = 0x2A47,
        UUID_SUPPORTED_UNREAD_ALERT_CATEGORY_CHAR         = 0x2A48,
        UUID_SYSTEM_ID_CHAR                               = 0x2A23,
        UUID_TEMPERATURE_MEASUREMENT_CHAR                 = 0x2A1C,
        UUID_TEMPERATURE_TYPE_CHAR                        = 0x2A1D,
        UUID_TIME_ACCURACY_CHAR                           = 0x2A12,
        UUID_TIME_SOURCE_CHAR                             = 0x2A13,
        UUID_TIME_UPDATE_CONTROL_POINT_CHAR               = 0x2A16,
        UUID_TIME_UPDATE_STATE_CHAR                       = 0x2A17,
        UUID_TIME_WITH_DST_CHAR                           = 0x2A11,
        UUID_TIME_ZONE_CHAR                               = 0x2A0E,
        UUID_TX_POWER_LEVEL_CHAR                          = 0x2A07,
        UUID_CSC_FEATURE_CHAR                             = 0x2A5C,
        UUID_CSC_MEASUREMENT_CHAR                         = 0x2A5B,
        UUID_RSC_FEATURE_CHAR                             = 0x2A54,
        UUID_RSC_MEASUREMENT_CHAR                         = 0x2A53,
    };

    /**************************************************************************/
    /*!
        \brief  Standard GATT characteristic presentation format unit types.
                These unit types are used to decribe what the raw numeric
                data in a characteristic actually represents.

        \note   See https://developer.bluetooth.org/gatt/units/Pages/default.aspx
    */
    /**************************************************************************/
    typedef enum ble_gatt_unit_e {
          BLE_GATT_UNIT_NONE                                                   = 0x2700,    /**< No specified unit type */
          BLE_GATT_UNIT_LENGTH_METRE                                           = 0x2701,    /**< Length, Metre */
          BLE_GATT_UNIT_MASS_KILOGRAM                                          = 0x2702,    /**< Mass, Kilogram */
          BLE_GATT_UNIT_TIME_SECOND                                            = 0x2703,    /**< Time, Second */
          BLE_GATT_UNIT_ELECTRIC_CURRENT_AMPERE                                = 0x2704,    /**< Electric Current, Ampere */
          BLE_GATT_UNIT_THERMODYNAMIC_TEMPERATURE_KELVIN                       = 0x2705,    /**< Thermodynamic Temperature, Kelvin */
          BLE_GATT_UNIT_AMOUNT_OF_SUBSTANCE_MOLE                               = 0x2706,    /**< Amount of Substance, Mole */
          BLE_GATT_UNIT_LUMINOUS_INTENSITY_CANDELA                             = 0x2707,    /**< Luminous Intensity, Candela */
          BLE_GATT_UNIT_AREA_SQUARE_METRES                                     = 0x2710,    /**< Area, Square Metres */
          BLE_GATT_UNIT_VOLUME_CUBIC_METRES                                    = 0x2711,    /**< Volume, Cubic Metres*/
          BLE_GATT_UNIT_VELOCITY_METRES_PER_SECOND                             = 0x2712,    /**< Velocity, Metres per Second*/
          BLE_GATT_UNIT_ACCELERATION_METRES_PER_SECOND_SQUARED                 = 0x2713,    /**< Acceleration, Metres per Second Squared */
          BLE_GATT_UNIT_WAVENUMBER_RECIPROCAL_METRE                            = 0x2714,    /**< Wave Number Reciprocal, Metre */
          BLE_GATT_UNIT_DENSITY_KILOGRAM_PER_CUBIC_METRE                       = 0x2715,    /**< Density, Kilogram per Cubic Metre */
          BLE_GATT_UNIT_SURFACE_DENSITY_KILOGRAM_PER_SQUARE_METRE              = 0x2716,    /**<  */
          BLE_GATT_UNIT_SPECIFIC_VOLUME_CUBIC_METRE_PER_KILOGRAM               = 0x2717,    /**<  */
          BLE_GATT_UNIT_CURRENT_DENSITY_AMPERE_PER_SQUARE_METRE                = 0x2718,    /**<  */
          BLE_GATT_UNIT_MAGNETIC_FIELD_STRENGTH_AMPERE_PER_METRE               = 0x2719,    /**< Magnetic Field Strength, Ampere per Metre */
          BLE_GATT_UNIT_AMOUNT_CONCENTRATION_MOLE_PER_CUBIC_METRE              = 0x271A,    /**<  */
          BLE_GATT_UNIT_MASS_CONCENTRATION_KILOGRAM_PER_CUBIC_METRE            = 0x271B,    /**<  */
          BLE_GATT_UNIT_LUMINANCE_CANDELA_PER_SQUARE_METRE                     = 0x271C,    /**<  */
          BLE_GATT_UNIT_REFRACTIVE_INDEX                                       = 0x271D,    /**<  */
          BLE_GATT_UNIT_RELATIVE_PERMEABILITY                                  = 0x271E,    /**<  */
          BLE_GATT_UNIT_PLANE_ANGLE_RADIAN                                     = 0x2720,    /**<  */
          BLE_GATT_UNIT_SOLID_ANGLE_STERADIAN                                  = 0x2721,    /**<  */
          BLE_GATT_UNIT_FREQUENCY_HERTZ                                        = 0x2722,    /**< Frequency, Hertz */
          BLE_GATT_UNIT_FORCE_NEWTON                                           = 0x2723,    /**< Force, Newton */
          BLE_GATT_UNIT_PRESSURE_PASCAL                                        = 0x2724,    /**< Pressure, Pascal */
          BLE_GATT_UNIT_ENERGY_JOULE                                           = 0x2725,    /**< Energy, Joule */
          BLE_GATT_UNIT_POWER_WATT                                             = 0x2726,    /**< Power, Watt */
          BLE_GATT_UNIT_ELECTRIC_CHARGE_COULOMB                                = 0x2727,    /**< Electrical Charge, Coulomb */
          BLE_GATT_UNIT_ELECTRIC_POTENTIAL_DIFFERENCE_VOLT                     = 0x2728,    /**< Electrical Potential Difference, Voltage */
          BLE_GATT_UNIT_CAPACITANCE_FARAD                                      = 0x2729,    /**<  */
          BLE_GATT_UNIT_ELECTRIC_RESISTANCE_OHM                                = 0x272A,    /**<  */
          BLE_GATT_UNIT_ELECTRIC_CONDUCTANCE_SIEMENS                           = 0x272B,    /**<  */
          BLE_GATT_UNIT_MAGNETIC_FLEX_WEBER                                    = 0x272C,    /**<  */
          BLE_GATT_UNIT_MAGNETIC_FLEX_DENSITY_TESLA                            = 0x272D,    /**<  */
          BLE_GATT_UNIT_INDUCTANCE_HENRY                                       = 0x272E,    /**<  */
          BLE_GATT_UNIT_THERMODYNAMIC_TEMPERATURE_DEGREE_CELSIUS               = 0x272F,    /**<  */
          BLE_GATT_UNIT_LUMINOUS_FLUX_LUMEN                                    = 0x2730,    /**<  */
          BLE_GATT_UNIT_ILLUMINANCE_LUX                                        = 0x2731,    /**<  */
          BLE_GATT_UNIT_ACTIVITY_REFERRED_TO_A_RADIONUCLIDE_BECQUEREL          = 0x2732,    /**<  */
          BLE_GATT_UNIT_ABSORBED_DOSE_GRAY                                     = 0x2733,    /**<  */
          BLE_GATT_UNIT_DOSE_EQUIVALENT_SIEVERT                                = 0x2734,    /**<  */
          BLE_GATT_UNIT_CATALYTIC_ACTIVITY_KATAL                               = 0x2735,    /**<  */
          BLE_GATT_UNIT_DYNAMIC_VISCOSITY_PASCAL_SECOND                        = 0x2740,    /**<  */
          BLE_GATT_UNIT_MOMENT_OF_FORCE_NEWTON_METRE                           = 0x2741,    /**<  */
          BLE_GATT_UNIT_SURFACE_TENSION_NEWTON_PER_METRE                       = 0x2742,    /**<  */
          BLE_GATT_UNIT_ANGULAR_VELOCITY_RADIAN_PER_SECOND                     = 0x2743,    /**<  */
          BLE_GATT_UNIT_ANGULAR_ACCELERATION_RADIAN_PER_SECOND_SQUARED         = 0x2744,    /**<  */
          BLE_GATT_UNIT_HEAT_FLUX_DENSITY_WATT_PER_SQUARE_METRE                = 0x2745,    /**<  */
          BLE_GATT_UNIT_HEAT_CAPACITY_JOULE_PER_KELVIN                         = 0x2746,    /**<  */
          BLE_GATT_UNIT_SPECIFIC_HEAT_CAPACITY_JOULE_PER_KILOGRAM_KELVIN       = 0x2747,    /**<  */
          BLE_GATT_UNIT_SPECIFIC_ENERGY_JOULE_PER_KILOGRAM                     = 0x2748,    /**<  */
          BLE_GATT_UNIT_THERMAL_CONDUCTIVITY_WATT_PER_METRE_KELVIN             = 0x2749,    /**<  */
          BLE_GATT_UNIT_ENERGY_DENSITY_JOULE_PER_CUBIC_METRE                   = 0x274A,    /**<  */
          BLE_GATT_UNIT_ELECTRIC_FIELD_STRENGTH_VOLT_PER_METRE                 = 0x274B,    /**<  */
          BLE_GATT_UNIT_ELECTRIC_CHARGE_DENSITY_COULOMB_PER_CUBIC_METRE        = 0x274C,    /**<  */
          BLE_GATT_UNIT_SURFACE_CHARGE_DENSITY_COULOMB_PER_SQUARE_METRE        = 0x274D,    /**<  */
          BLE_GATT_UNIT_ELECTRIC_FLUX_DENSITY_COULOMB_PER_SQUARE_METRE         = 0x274E,    /**<  */
          BLE_GATT_UNIT_PERMITTIVITY_FARAD_PER_METRE                           = 0x274F,    /**<  */
          BLE_GATT_UNIT_PERMEABILITY_HENRY_PER_METRE                           = 0x2750,    /**<  */
          BLE_GATT_UNIT_MOLAR_ENERGY_JOULE_PER_MOLE                            = 0x2751,    /**<  */
          BLE_GATT_UNIT_MOLAR_ENTROPY_JOULE_PER_MOLE_KELVIN                    = 0x2752,    /**<  */
          BLE_GATT_UNIT_EXPOSURE_COULOMB_PER_KILOGRAM                          = 0x2753,    /**<  */
          BLE_GATT_UNIT_ABSORBED_DOSE_RATE_GRAY_PER_SECOND                     = 0x2754,    /**<  */
          BLE_GATT_UNIT_RADIANT_INTENSITY_WATT_PER_STERADIAN                   = 0x2755,    /**<  */
          BLE_GATT_UNIT_RADIANCE_WATT_PER_SQUARE_METRE_STERADIAN               = 0x2756,    /**<  */
          BLE_GATT_UNIT_CATALYTIC_ACTIVITY_CONCENTRATION_KATAL_PER_CUBIC_METRE = 0x2757,    /**<  */
          BLE_GATT_UNIT_TIME_MINUTE                                            = 0x2760,    /**< Time, Minute */
          BLE_GATT_UNIT_TIME_HOUR                                              = 0x2761,    /**< Time, Hour */
          BLE_GATT_UNIT_TIME_DAY                                               = 0x2762,    /**< Time, Day */
          BLE_GATT_UNIT_PLANE_ANGLE_DEGREE                                     = 0x2763,    /**<  */
          BLE_GATT_UNIT_PLANE_ANGLE_MINUTE                                     = 0x2764,    /**<  */
          BLE_GATT_UNIT_PLANE_ANGLE_SECOND                                     = 0x2765,    /**<  */
          BLE_GATT_UNIT_AREA_HECTARE                                           = 0x2766,    /**<  */
          BLE_GATT_UNIT_VOLUME_LITRE                                           = 0x2767,    /**<  */
          BLE_GATT_UNIT_MASS_TONNE                                             = 0x2768,    /**<  */
          BLE_GATT_UNIT_PRESSURE_BAR                                           = 0x2780,    /**< Pressure, Bar */
          BLE_GATT_UNIT_PRESSURE_MILLIMETRE_OF_MERCURY                         = 0x2781,    /**< Pressure, Millimetre of Mercury */
          BLE_GATT_UNIT_LENGTH_ANGSTROM                                        = 0x2782,    /**<  */
          BLE_GATT_UNIT_LENGTH_NAUTICAL_MILE                                   = 0x2783,    /**<  */
          BLE_GATT_UNIT_AREA_BARN                                              = 0x2784,    /**<  */
          BLE_GATT_UNIT_VELOCITY_KNOT                                          = 0x2785,    /**<  */
          BLE_GATT_UNIT_LOGARITHMIC_RADIO_QUANTITY_NEPER                       = 0x2786,    /**<  */
          BLE_GATT_UNIT_LOGARITHMIC_RADIO_QUANTITY_BEL                         = 0x2787,    /**<  */
          BLE_GATT_UNIT_LENGTH_YARD                                            = 0x27A0,    /**< Length, Yard */
          BLE_GATT_UNIT_LENGTH_PARSEC                                          = 0x27A1,    /**< Length, Parsec */
          BLE_GATT_UNIT_LENGTH_INCH                                            = 0x27A2,    /**< Length, Inch */
          BLE_GATT_UNIT_LENGTH_FOOT                                            = 0x27A3,    /**< Length, Foot */
          BLE_GATT_UNIT_LENGTH_MILE                                            = 0x27A4,    /**< Length, Mile */
          BLE_GATT_UNIT_PRESSURE_POUND_FORCE_PER_SQUARE_INCH                   = 0x27A5,    /**<  */
          BLE_GATT_UNIT_VELOCITY_KILOMETRE_PER_HOUR                            = 0x27A6,    /**< Velocity, Kilometre per Hour */
          BLE_GATT_UNIT_VELOCITY_MILE_PER_HOUR                                 = 0x27A7,    /**< Velocity, Mile per Hour */
          BLE_GATT_UNIT_ANGULAR_VELOCITY_REVOLUTION_PER_MINUTE                 = 0x27A8,    /**< Angular Velocity, Revolution per Minute */
          BLE_GATT_UNIT_ENERGY_GRAM_CALORIE                                    = 0x27A9,    /**< Energy, Gram Calorie */
          BLE_GATT_UNIT_ENERGY_KILOGRAM_CALORIE                                = 0x27AA,    /**< Energy, Kilogram Calorie */
          BLE_GATT_UNIT_ENERGY_KILOWATT_HOUR                                   = 0x27AB,    /**< Energy, Killowatt Hour */
          BLE_GATT_UNIT_THERMODYNAMIC_TEMPERATURE_DEGREE_FAHRENHEIT            = 0x27AC,    /**<  */
          BLE_GATT_UNIT_PERCENTAGE                                             = 0x27AD,    /**< Percentage */
          BLE_GATT_UNIT_PER_MILLE                                              = 0x27AE,    /**<  */
          BLE_GATT_UNIT_PERIOD_BEATS_PER_MINUTE                                = 0x27AF,    /**<  */
          BLE_GATT_UNIT_ELECTRIC_CHARGE_AMPERE_HOURS                           = 0x27B0,    /**<  */
          BLE_GATT_UNIT_MASS_DENSITY_MILLIGRAM_PER_DECILITRE                   = 0x27B1,    /**<  */
          BLE_GATT_UNIT_MASS_DENSITY_MILLIMOLE_PER_LITRE                       = 0x27B2,    /**<  */
          BLE_GATT_UNIT_TIME_YEAR                                              = 0x27B3,    /**< Time, Year */
          BLE_GATT_UNIT_TIME_MONTH                                             = 0x27B4,    /**< Time, Month */
          BLE_GATT_UNIT_CONCENTRATION_COUNT_PER_CUBIC_METRE                    = 0x27B5,    /**<  */
          BLE_GATT_UNIT_IRRADIANCE_WATT_PER_SQUARE_METRE                       = 0x27B6     /**<  */
    } ble_gatt_unit_t;

    /**************************************************************************/
    /*!
        \brief  Standard GATT number types

        \note   See Bluetooth Specification 4.0 (Vol. 3), Part G, Section 3.3.3.5.2
        \note   See http://developer.bluetooth.org/gatt/descriptors/Pages/DescriptorViewer.aspx?u=org.bluetooth.descriptor.gatt.characteristic_presentation_format.xml
    */
    /**************************************************************************/
    typedef enum ble_gatt_format_e {
        BLE_GATT_FORMAT_RFU     = 0x00, /**< Reserved For Future Use. */
        BLE_GATT_FORMAT_BOOLEAN = 0x01, /**< Boolean. */
        BLE_GATT_FORMAT_2BIT    = 0x02, /**< Unsigned 2-bit integer. */
        BLE_GATT_FORMAT_NIBBLE  = 0x03, /**< Unsigned 4-bit integer. */
        BLE_GATT_FORMAT_UINT8   = 0x04, /**< Unsigned 8-bit integer. */
        BLE_GATT_FORMAT_UINT12  = 0x05, /**< Unsigned 12-bit integer. */
        BLE_GATT_FORMAT_UINT16  = 0x06, /**< Unsigned 16-bit integer. */
        BLE_GATT_FORMAT_UINT24  = 0x07, /**< Unsigned 24-bit integer. */
        BLE_GATT_FORMAT_UINT32  = 0x08, /**< Unsigned 32-bit integer. */
        BLE_GATT_FORMAT_UINT48  = 0x09, /**< Unsigned 48-bit integer. */
        BLE_GATT_FORMAT_UINT64  = 0x0A, /**< Unsigned 64-bit integer. */
        BLE_GATT_FORMAT_UINT128 = 0x0B, /**< Unsigned 128-bit integer. */
        BLE_GATT_FORMAT_SINT8   = 0x0C, /**< Signed 2-bit integer. */
        BLE_GATT_FORMAT_SINT12  = 0x0D, /**< Signed 12-bit integer. */
        BLE_GATT_FORMAT_SINT16  = 0x0E, /**< Signed 16-bit integer. */
        BLE_GATT_FORMAT_SINT24  = 0x0F, /**< Signed 24-bit integer. */
        BLE_GATT_FORMAT_SINT32  = 0x10, /**< Signed 32-bit integer. */
        BLE_GATT_FORMAT_SINT48  = 0x11, /**< Signed 48-bit integer. */
        BLE_GATT_FORMAT_SINT64  = 0x12, /**< Signed 64-bit integer. */
        BLE_GATT_FORMAT_SINT128 = 0x13, /**< Signed 128-bit integer. */
        BLE_GATT_FORMAT_FLOAT32 = 0x14, /**< IEEE-754 32-bit floating point. */
        BLE_GATT_FORMAT_FLOAT64 = 0x15, /**< IEEE-754 64-bit floating point. */
        BLE_GATT_FORMAT_SFLOAT  = 0x16, /**< IEEE-11073 16-bit SFLOAT. */
        BLE_GATT_FORMAT_FLOAT   = 0x17, /**< IEEE-11073 32-bit FLOAT. */
        BLE_GATT_FORMAT_DUINT16 = 0x18, /**< IEEE-20601 format. */
        BLE_GATT_FORMAT_UTF8S   = 0x19, /**< UTF-8 string. */
        BLE_GATT_FORMAT_UTF16S  = 0x1A, /**< UTF-16 string. */
        BLE_GATT_FORMAT_STRUCT  = 0x1B  /**< Opaque Structure. */
    } ble_gatt_format_t;

    /**************************************************************************/
    /*!
        \brief  Standard GATT characteritic properties

        \note   See Bluetooth Specification 4.0 (Vol. 3), Part G, Section 3.3.1.1
                and Section 3.3.3.1 for Extended Properties
    */
    /**************************************************************************/
    typedef enum ble_gatt_char_properties_e {
        BLE_GATT_CHAR_PROPERTIES_NONE                        = 0x00,
        BLE_GATT_CHAR_PROPERTIES_BROADCAST                   = 0x01, /**< Permits broadcasts of the Characteristic Value using Server Characteristic Configuration Descriptor. */
        BLE_GATT_CHAR_PROPERTIES_READ                        = 0x02, /**< Permits reads of the Characteristic Value. */
        BLE_GATT_CHAR_PROPERTIES_WRITE_WITHOUT_RESPONSE      = 0x04, /**< Permits writes of the Characteristic Value without response. */
        BLE_GATT_CHAR_PROPERTIES_WRITE                       = 0x08, /**< Permits writes of the Characteristic Value with response. */
        BLE_GATT_CHAR_PROPERTIES_NOTIFY                      = 0x10, /**< Permits notifications of a Characteristic Value without acknowledgement. */
        BLE_GATT_CHAR_PROPERTIES_INDICATE                    = 0x20, /**< Permits indications of a Characteristic Value with acknowledgement. */
        BLE_GATT_CHAR_PROPERTIES_AUTHENTICATED_SIGNED_WRITES = 0x40, /**< Permits signed writes to the Characteristic Value. */
        BLE_GATT_CHAR_PROPERTIES_EXTENDED_PROPERTIES         = 0x80  /**< Additional characteristic properties are defined in the Characteristic Extended Properties Descriptor */
    } ble_gatt_char_properties_t;

    /**************************************************************************/
    /*!
        \brief  GATT presentation format wrapper

        \note   See Bluetooth Specification 4.0 (Vol. 3), Part G, Section 3.3.3.5
        \note   See https://developer.bluetooth.org/gatt/descriptors/Pages/DescriptorViewer.aspx?u=org.bluetooth.descriptor.gatt.characteristic_presentation_format.xml
    */
    /**************************************************************************/
    typedef struct PresentationFormat {
        uint8_t  gatt_format;    /**< Format of the value, see @ref ble_gatt_format_t. */
        int8_t   exponent;       /**< Exponent for integer data types. Ex. if Exponent = -3 and the char value is 3892, the actual value is 3.892 */
        uint16_t gatt_unit;      /**< UUID from Bluetooth Assigned Numbers, see @ref ble_gatt_unit_t. */
        uint8_t  gatt_namespace; /**< Namespace from Bluetooth Assigned Numbers, normally '1',  see @ref BLE_GATT_CPF_NAMESPACES. */
        uint16_t gatt_nsdesc;    /**< Namespace description from Bluetooth Assigned Numbers, normally '0', see @ref BLE_GATT_CPF_NAMESPACES. */
    } presentation_format_t;

    /**
     *  @brief  Creates a new GattCharacteristic using the specified 16-bit
     *          UUID, value length, and properties
     *
     *  @note   The UUID value must be unique in the service and is normally >1
     *
     *  @param[in]  uuid
     *              The UUID to use for this characteristic
     *  @param[in]  valuePtr
     *              The memory holding the initial value.
     *  @param[in]  initialLen
     *              The min length in bytes of this characteristic's value
     *  @param[in]  maxLen
     *              The max length in bytes of this characteristic's value
     *  @param[in]  props
     *              The 8-bit bit field containing the characteristic's properties
     *
     *  @section EXAMPLE
     *
     *  @code
     *
     *  // UUID = 0x2A19, Min length 2, Max len = 2, Properties = write
     *  GattCharacteristic c = GattCharacteristic( 0x2A19, 2, 2, BLE_GATT_CHAR_PROPERTIES_WRITE );
     *
     *  @endcode
     */
    /**************************************************************************/
    GattCharacteristic(const UUID &uuid, uint8_t *valuePtr = NULL, uint16_t initialLen = 0, uint16_t maxLen = 0,
                       uint8_t props = BLE_GATT_CHAR_PROPERTIES_NONE) :
        _uuid(uuid), _valuePtr(valuePtr), _initialLen(initialLen), _lenMax(maxLen), _handle(), _properties(props) {
        /* empty */
    }

public:
    uint16_t getHandle(void) const {
        return _handle;
    }
    void setHandle(uint16_t id) {
        _handle = id;
    }
    const UUID &getUUID(void) const {
        return _uuid;
    }
    uint8_t getProperties(void) const {
        return _properties;
    }
    uint16_t getInitialLength(void) const {
        return _initialLen;
    }
    uint16_t getMaxLength(void) const {
        return _lenMax;
    }
    uint8_t *getValuePtr(void) {
        return _valuePtr;
    }

private:
    UUID      _uuid;        /* Characteristic UUID */
    uint8_t  *_valuePtr;
    uint16_t  _initialLen;  /* Initial length of the value */
    uint16_t  _lenMax;      /* Maximum length of the value */
    uint16_t  _handle;
    uint8_t   _properties;
};

#endif // ifndef __GATT_CHARACTERISTIC_H__