Revision 11:03ff417d0d5d, committed 2013-12-09

Comitter:

chrisisthefish

Date:

Mon Dec 09 01:44:25 2013 +0000

Parent:

10:de0be690b3c0

Commit message:

Added support for Mbed application board LCD screen.; Added support for displaying IP address and status on LCD screen.

Changed in this revision

--- a/XbeeCommLib.h	Fri Dec 06 07:05:49 2013 +0000
+++ b/XbeeCommLib.h	Mon Dec 09 01:44:25 2013 +0000
@@ -30,6 +30,7 @@
 
 void compareDigitalReadWrite();
 void monitorTimers();
+void lcdDisplay();
 
 //void up( void );
 //void down( void );

--- a/main.cpp	Fri Dec 06 07:05:49 2013 +0000
+++ b/main.cpp	Mon Dec 09 01:44:25 2013 +0000
@@ -19,6 +19,7 @@
 #include "HTTPServer.h"
 #include "SerialRPCInterface.h"
 #include "XbeeCommLib.h"
+#include "C12832_lcd.h"
 
 DigitalIn pb(p8);
 DigitalOut led1(LED1);
@@ -27,6 +28,7 @@
 DigitalOut led4(LED4);
 
 Serial xbeeSerial(p9, p10);
+C12832_LCD lcd;
 
 unsigned char data[500];
 int dataCounter = 0;
@@ -76,6 +78,7 @@
 
 EthernetNetIf eth;  
 HTTPServer svr;
+IpAddr Ip;
 
 
 
@@ -128,9 +131,7 @@
 
 
 int main() {
-    
-    //xbeeSerial.attach(&xbeeSerialHandler);
-    
+ 
     printf("\n\nBeginning Setup\n");
     // Ethernet Setup
     EthernetErr ethErr = eth.setup();
@@ -140,13 +141,17 @@
     }
     printf("Setup OK\n");
     
+    Ip = eth.getIp();
+    lcd.cls();
+    lcd.printf("IP Address: %d.%d.%d.%d\r\n", Ip[0], Ip[1], Ip[2], Ip[3]);
+    
     // Add RPCHandler
     svr.addHandler<RPCHandler>("/rpc");
     
     // Show that the server is ready and listening
     svr.bind(80);
     printf("RPC Server Ready\n");
-
+    
 
     xbeeList[0].addrHigh = 0x0013a200;
     xbeeList[0].addrLow = 0x4079d00b; //Router0
@@ -210,7 +215,7 @@
         if(tm.read() > 1){
             led1 = !led1;
             tm.start();
-            
+            lcdDisplay();
             
         }
     }
@@ -444,3 +449,38 @@
         }
     }
 }
+
+
+
+void lcdDisplay(){
+    int tempCount = 0;
+    int lightCount = 0;
+//    lcd.cls();
+//    lcd.locate(0,0);
+//    lcd.printf("IP Address: %d.%d.%d.%d\r\n", Ip[0], Ip[1], Ip[2], Ip[3]);
+    
+    for(int i = 0; i < xbeeCount; i++){
+        for(int j = 0; j < 4; j++){
+            if(xbeeList[i].analogRpcDataPointer[j] != NULL){
+                lcd.locate(0,(tempCount*10)+10);
+                lcd.printf("            ");
+                lcd.locate(0,(tempCount*10)+10);
+                lcd.printf("Temp%d: %4.2fF", i, *xbeeList[i].analogRpcDataPointer[j]);
+                tempCount++;
+                break;
+            }
+        }
+        
+        if(xbeeList[i].rpcDataPointer[0] != NULL && xbeeList[i].digitalType[0] == 1){
+            lcd.locate(70,(lightCount*10)+10);
+            lcd.printf("            ", i);
+            lcd.locate(70,(lightCount*10)+10);
+            if(*xbeeList[i].rpcDataPointer[0]){
+                lcd.printf("Light%d: On", i);
+            }else{
+                lcd.printf("Light%d: Off", i);
+            }
+            lightCount++;
+        }
+    }
+}
\ No newline at end of file