Christian Burri / Mbed 2 deprecated autonomousRobotAndroid

This program is for an autonomous robot for the competition at the Hochschule Luzern. We are one of the 32 teams. <a href="http://cruisingcrepe.wordpress.com/">http://cruisingcrepe.wordpress.com/</a> The postition control is based on this Documentation: Control of Wheeled Mobile Robots: An Experimental Overview from Alessandro De Luca, Giuseppe Oriolo, Marilena Vendittelli. For more information see here: <a href="http://www.dis.uniroma1.it/~labrob/pub/papers/Ramsete01.pdf">http://www.dis.uniroma1.it/~labrob/pub/papers/Ramsete01.pdf</a>

Dependencies:   mbed

Fork of autonomousRobotAndroid by Christian Burri

Actuators/MaxonESCON.h

Committer:
chrigelburri
Date:
2013-03-07
Revision:
3:92ba0254af87
Parent:
Actuators/MaxonESCON/MaxonESCON.h@ 2:d8e1613dc38b
Child:
6:48eeb41188dd

File content as of revision 3:92ba0254af87:

#ifndef _MAXON_ESCON_H_
#define _MAXON_ESCON_H_

#include "mbed.h"
#include "Hallsensor.h"
#include "defines.h"

/**
 * @author Christian Burri
 *
 * @section LICENSE
 *
 * Copyright &copy; 2013 HSLU Pren Team #1 Cruising Crêpe
 * All rights reserved.
 *
 * @section DESCRIPTION
 *
 * This class implements the driver for the Maxon ESCON servo driver.
 * For more information see on the Datasheet:
 *
 * Datasheet:
 * <a href="http://escon.maxonmotor.com">http://escon.maxonmotor.com</a>
 */
class MaxonESCON
{

private:

    /** To Enable the amplifier */
    DigitalOut _enb;
    /** Duty Cycle to set the speed */
    PwmOut _pwm;
    /** Hallsensor Class */
    Hallsensor* _hall;
    /** Ready output from ESCON */
    DigitalIn _isenb;
    /** Actual speed from ESCON analog Output 1 */
    AnalogIn _actualSpeed;
    /** increment the Hallpattern */
    int    _pulses;

public:

    /** Create a motor control object.
       * @param enb DigitalOut, set high for enable
       * @param isenb DigitalIn, high for enable
       * @param pwm PwmOut pin, set the velocity
       * @param actualSpeed AnalogIn filtered signal for ActualSpeed from Motor
       * @param hall The object of the hallsensor from Motor
       */
    MaxonESCON(PinName enb,
               PinName isenb,
               PinName pwm,
               PinName actualSpeed,
               Hallsensor *hall);

    /** Set the speed of the motor with a pwm for 10%..90%.
    * 50% PWM is 0rpm.
    * Caclulate from [1/s] in [1/min] and the Factor of the ESCON.
    * @param speed The speed of the motor as a normalised value, given in [1/s]
    */
    void setVelocity(float speed);

    /**Return the speed from ESCON.
    * 0 rpm is defined in the Analog input as 1.65V
    * @return speed of the motor, given in [1/s]
    */
    float getActualSpeed(void);

    /** Set the period of the pwm duty cycle.
    * Wrapper for PwmOut::period()
    * @param period Pwm duty cycle, given in [s].
    */
    void period(float period);

    /** Set the Motor to a enable sate.
    * @param enb <code>false</code> for disable <code>true</code> for enable.
    */
    void enable(bool enb);

    /**Tests if the servo drive is enabled.
    * @return <code>true</code> if the drive is enabled, <code>false</code> otherwise.
    */
    bool isEnabled(void);

    /** Return the number of Pulses.
    * @return Pulses, given in [count]
    */
    int getPulses(void);

    /** Set the Pulses of the Motor, given in [count]
    * @return Pulses, given in [count]
    */
    int setPulses(int setPos);
};

#endif