![](/media/cache/img/default_profile.jpg.50x50_q85.jpg)
This program is for an autonomous robot for the competition at the Hochschule Luzern. http://cruisingcrepe.wordpress.com/ We are one of the 32 teams. http://cruisingcrepe.wordpress.com/ The postition control is based on this Documentation: Control of Wheeled Mobile Robots: An Experimental Overview from Alessandro De Luca, Giuseppe Oriolo, Marilena Vendittelli. For more information see here: http://www.dis.uniroma1.it/~labrob/pub/papers/Ramsete01.pdf
Fork of autonomous Robot Android by
Diff: StateDefines/defines.h
- Revision:
- 10:09ddb819fdcb
- Parent:
- 9:d3cdcdef9719
- Child:
- 11:775ebb69d5e1
--- a/StateDefines/defines.h Sat Mar 30 16:35:22 2013 +0000 +++ b/StateDefines/defines.h Thu Apr 04 06:43:43 2013 +0000 @@ -1,27 +1,89 @@ #ifndef _DEFINES_H_ #define _DEFINES_H_ +/*! \file defines.h +\brief All defines for the roboter you can see here. +*/ + #include "mbed.h" -// Physical dimensions -#define PI 3.141592654f // Physical dimensions π. +/** + * Physical dimensions π + */ +#define PI 3.141592654f + +/** + * @name maxon motor #339282 EC 45 flat 30W + * @{ + */ + +/** +* Number of of pole pairs +*/ +#define POLE_PAIRS 8u -// maxon motor #339282 EC 45 flat 30W and GEAR -#define POLE_PAIRS 8u // Number of of pole pairs -#define GEAR 1/11.6f // Gear on the motor 1/11.6f -#define PULSES_PER_STEP 6u // Pulses per electrical step Hallsensor, have 6 steps +/** +* Gear on the motor 1/11.6f +*/ +#define GEAR 1/11.6f + +/** +* Pulses per electrical step form the Hallsensor, have 6 steps +*/ +#define PULSES_PER_STEP 6u +/*! @} */ + +/** + * @name Physical Dimension of the car + * @{ + */ + +/** + * Value for the diffrerenz between left an right, given in [m] + */ +#define WHEEL_RADIUS_DIFF 0.0000f -// Physical Dimension of the car -#define WHEEL_RADIUS_DIFF 0.0000f // positiv zu weit rechts, given in [m] -#define WHEEL_RADIUS_LEFT 0.040280f // radius of the left wheel, given in [m] 0.040280f -#define WHEEL_RADIUS_RIGHT (WHEEL_RADIUS_LEFT - WHEEL_RADIUS_DIFF) // radius of the left wheel, given in [m] -#define WHEEL_DISTANCE 0.2000f // Distance of the wheel, given in [m] Grösser --> mehr drehen +/** + * radius of the left wheel, given in [m] + */ +#define WHEEL_RADIUS_LEFT 0.040280f + +/** + * radius of the left wheel, given in [m] + */ +#define WHEEL_RADIUS_RIGHT (WHEEL_RADIUS_LEFT - WHEEL_RADIUS_DIFF) + +/** + * Distance of the wheel, given in [m] Greater --> turn more + */ +#define WHEEL_DISTANCE 0.2000f +/*! @} */ + +/** + * @name State Bits of the car + * @{ + */ -// State Bits of the car -#define STATE_STOP 1u // Bit0 = stop pressed -#define STATE_UNDER 2u // Bit1 = Undervoltage battery -#define STATE_LEFT 4u // Bit2 = left ESCON in error state -#define STATE_RIGHT 8u // Bit3 = right ESCON in error state +/** + * Bit0 = stop pressed + */ +#define STATE_STOP 1u + +/** + * Bit1 = Undervoltage battery + */ +#define STATE_UNDER 2u + +/** + * Bit2 = left ESCON in error state + */ +#define STATE_LEFT 4u + +/** + * Bit3 = right ESCON in error state + */ +#define STATE_RIGHT 8u +/*! @} */ // ESCON Constands #define ESCON_SET_FACTOR 1500.0f // Speed Factor how set in the ESCON @@ -40,11 +102,11 @@ #define THETA_ACCELERATION 1.0f // maximum rotational acceleration, given in [rad/s2] // position controller -#define GAIN 0.8f // Main Gain +#define GAIN 0.8f // Main Gain #define K1 0.8f * GAIN -#define K2 3.0f * GAIN // deafult 3.0f -#define K3 2.0f * GAIN // deafult 2.0f -#define MIN_DISTANCE_ERROR -0.005f // min. Distance to switch the position controller off. Because when Distance Error goes to zero the ATAN2 is not define, given in [m] +#define K2 3.0f * GAIN // deafult 3.0f +#define K3 2.0f * GAIN // default 2.0f +#define MIN_DISTANCE_ERROR -0.005f // min. Distance to switch the position controller off. Because when Distance Error goes to zero the ATAN2 is not define, given in [m] // LiPo Batterie #define BAT_MULTIPLICATOR 21.633333333f // R2 / (R1 + R2) = 0.153 R2= 10k , R1 = 1.8k 1/0.153 = 6.555 ---> 3.3 * 6.555 = 21.6333333f @@ -56,23 +118,14 @@ #define PERIOD_STATE 0.001f // 1kHz Rate for State Objekt #define PERIOD_ANDROID 0.1f // 10Hz Rate for State Objekt -// Compass Maxima und Minima for the Filter -#define SET_MAXIMAS_MINIMAS true // For Set the maximas und minimas when false the object search the maximas minimas by your own -#define COMP_X_MAX 391.219910f // Maximum X-Range -#define COMP_Y_MAX 382.915161f // Maximum Y-Range -#define COMP_Z_MAX -237.855042f // Maximum Z-Range not used in this side -#define COMP_X_MIN -169.952530f // Minimum X-Range -#define COMP_Y_MIN -247.647675f // Minimum Y-Range -#define COMP_Z_MIN -385.915009f // Minimun Z-Range not used in this side - // Android Buffer Size for communication #define OUTL 100 -#define INBL 100 +#define INBL 100 - /** - * struct state - * structure containing system sensor data - **/ +/** +* struct state +* structure containing system sensor data +**/ typedef struct state { /** millis Time [ms]*/ int millis;