Matthew Lister
BLE_API
Diff: ble/Gap.h
- Revision:
- 1156:e1ea38b576c6
- Parent:
- 1135:22aada733dbd
- Child:
- 1160:c6c088802d38
--- a/ble/Gap.h Wed Apr 06 19:14:34 2016 +0100
+++ b/ble/Gap.h Wed Apr 06 19:14:38 2016 +0100
@@ -40,23 +40,24 @@
/**
* Address-type for BLEProtocol addresses.
*
- * @note: deprecated. Use BLEProtocol::AddressType_t instead.
+ * @deprecated Use BLEProtocol::AddressType_t instead.
*/
typedef BLEProtocol::AddressType_t AddressType_t;
/**
* Address-type for BLEProtocol addresses.
- * @note: deprecated. Use BLEProtocol::AddressType_t instead.
+ *
+ * @deprecated Use BLEProtocol::AddressType_t instead.
*/
typedef BLEProtocol::AddressType_t addr_type_t;
/**
* Address-type for BLEProtocol addresses.
- * \deprecated: Use BLEProtocol::AddressType_t instead.
*
- * DEPRECATION ALERT: The following constants have been left in their
- * deprecated state to transparenly support existing applications which may
- * have used Gap::ADDR_TYPE_*.
+ * @deprecated Use BLEProtocol::AddressType_t instead. The following
+ * constants have been left in their deprecated state to
+ * transparenly support existing applications which may have
+ * used Gap::ADDR_TYPE_*.
*/
enum DeprecatedAddressType_t {
ADDR_TYPE_PUBLIC = BLEProtocol::AddressType::PUBLIC,
@@ -65,11 +66,27 @@
ADDR_TYPE_RANDOM_PRIVATE_NON_RESOLVABLE = BLEProtocol::AddressType::RANDOM_PRIVATE_NON_RESOLVABLE
};
- static const unsigned ADDR_LEN = BLEProtocol::ADDR_LEN; /**< Length (in octets) of the BLE MAC address. */
- typedef BLEProtocol::AddressBytes_t Address_t; /**< 48-bit address, LSB format. @Note: Deprecated. Use BLEProtocol::AddressBytes_t instead. */
- typedef BLEProtocol::AddressBytes_t address_t; /**< 48-bit address, LSB format. @Note: Deprecated. Use BLEProtocol::AddressBytes_t instead. */
+ /**
+ * Length (in octets) of the BLE MAC address.
+ */
+ static const unsigned ADDR_LEN = BLEProtocol::ADDR_LEN;
+ /**
+ * 48-bit address, LSB format.
+ *
+ * @deprecated Use BLEProtocol::AddressBytes_t instead.
+ */
+ typedef BLEProtocol::AddressBytes_t Address_t;
+ /**
+ * 48-bit address, LSB format.
+ *
+ * @deprecated Use BLEProtocol::AddressBytes_t instead.
+ */
+ typedef BLEProtocol::AddressBytes_t address_t;
public:
+ /**
+ * Enumeration for timeout sources.
+ */
enum TimeoutSource_t {
TIMEOUT_SRC_ADVERTISING = 0x00, /**< Advertising timeout. */
TIMEOUT_SRC_SECURITY_REQUEST = 0x01, /**< Security request timeout. */
@@ -137,51 +154,94 @@
* @experimental
*/
struct Whitelist_t {
- BLEProtocol::Address_t *addresses;
- uint8_t size;
- uint8_t capacity;
+ BLEProtocol::Address_t *addresses; /**< List of BLE addresses in the whitelist. */
+ uint8_t size; /**< Total number of BLE addresses in this whitelist */
+ uint8_t capacity; /**< Maximum number of BLE addresses that can be added to this whitelist. */
};
- /* Describes the current state of the device (more than one bit can be set). */
+ /**
+ * Describes the current state of the device (more than one bit can be set).
+ */
struct GapState_t {
unsigned advertising : 1; /**< Peripheral is currently advertising. */
unsigned connected : 1; /**< Peripheral is connected to a central. */
};
- typedef uint16_t Handle_t; /* Type for connection handle. */
+ /**
+ * Type for connection handle.
+ */
+ typedef uint16_t Handle_t;
+ /**
+ * Structure containing GAP connection parameters. When in peripheral role
+ * the connection parameters are suggestions. The choice of the connection
+ * parameters is eventually up to the central.
+ */
typedef struct {
- uint16_t minConnectionInterval; /**< Minimum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
- uint16_t maxConnectionInterval; /**< Maximum Connection Interval in 1.25 ms units, see @ref BLE_GAP_CP_LIMITS.*/
- uint16_t slaveLatency; /**< Slave Latency in number of connection events, see @ref BLE_GAP_CP_LIMITS.*/
- uint16_t connectionSupervisionTimeout; /**< Connection Supervision Timeout in 10 ms units, see @ref BLE_GAP_CP_LIMITS.*/
+ uint16_t minConnectionInterval; /**< Minimum Connection Interval in 1.25 ms units, see BLE_GAP_CP_LIMITS.*/
+ uint16_t maxConnectionInterval; /**< Maximum Connection Interval in 1.25 ms units, see BLE_GAP_CP_LIMITS.*/
+ uint16_t slaveLatency; /**< Slave Latency in number of connection events, see BLE_GAP_CP_LIMITS.*/
+ uint16_t connectionSupervisionTimeout; /**< Connection Supervision Timeout in 10 ms units, see BLE_GAP_CP_LIMITS.*/
} ConnectionParams_t;
+ /**
+ * Enumeration for the possible GAP roles of a BLE device.
+ */
enum Role_t {
PERIPHERAL = 0x1, /**< Peripheral Role. */
CENTRAL = 0x2, /**< Central Role. */
};
+ /**
+ * Structure containing data and metadata of a scanned advertising packet.
+ */
struct AdvertisementCallbackParams_t {
- BLEProtocol::AddressBytes_t peerAddr;
- int8_t rssi;
- bool isScanResponse;
- GapAdvertisingParams::AdvertisingType_t type;
- uint8_t advertisingDataLen;
- const uint8_t *advertisingData;
+ BLEProtocol::AddressBytes_t peerAddr; /**< The peer's BLE address. */
+ int8_t rssi; /**< The advertisement packet RSSI value. */
+ bool isScanResponse; /**< Whether this packet is the response to a scan request. */
+ GapAdvertisingParams::AdvertisingType_t type; /**< The type of advertisement. */
+ uint8_t advertisingDataLen; /**< Length of the advertisement data. */
+ const uint8_t *advertisingData; /**< Pointer to the advertisement packet's data. */
};
+
+ /**
+ * Type for the handlers of advertisement callback events. Refer to
+ * Gap::startScan().
+ */
typedef FunctionPointerWithContext<const AdvertisementCallbackParams_t *> AdvertisementReportCallback_t;
+ /**
+ * Encapsulates the parameters of a connection. This information is passed
+ * to the registered handler of connection events. Refer to Gap::onConnection().
+ */
struct ConnectionCallbackParams_t {
- Handle_t handle;
- Role_t role;
- BLEProtocol::AddressType_t peerAddrType;
- BLEProtocol::AddressBytes_t peerAddr;
- BLEProtocol::AddressType_t ownAddrType;
- BLEProtocol::AddressBytes_t ownAddr;
- const ConnectionParams_t *connectionParams;
+ Handle_t handle; /**< The ID for this connection */
+ Role_t role; /**< This device's role in the connection */
+ BLEProtocol::AddressType_t peerAddrType; /**< The peer's BLE address type */
+ BLEProtocol::AddressBytes_t peerAddr; /**< The peer's BLE address */
+ BLEProtocol::AddressType_t ownAddrType; /**< This device's BLE address type */
+ BLEProtocol::AddressBytes_t ownAddr; /**< This devices's BLE address */
+ const ConnectionParams_t *connectionParams; /**< The currently configured connection parameters */
+ /**
+ * Constructor for ConnectionCallbackParams_t.
+ *
+ * @param[in] handleIn
+ * Value for ConnectionCallbackParams_t::handle
+ * @param[in] roleIn
+ * Value for ConnectionCallbackParams_t::role
+ * @param[in] peerAddrTypeIn
+ * Value for ConnectionCallbackParams_t::peerAddrType
+ * @param[in] peerAddrIn
+ * Value for ConnectionCallbackParams_t::peerAddr
+ * @param[in] ownAddrTypeIn
+ * Value for ConnectionCallbackParams_t::ownAddrType
+ * @param[in] ownAddrIn
+ * Value for ConnectionCallbackParams_t::ownAddr
+ * @param[in] connectionParamsIn
+ * Value for ConnectionCallbackParams_t::connectionParams
+ */
ConnectionCallbackParams_t(Handle_t handleIn,
Role_t roleIn,
BLEProtocol::AddressType_t peerAddrTypeIn,
@@ -201,10 +261,22 @@
}
};
+ /**
+ * Structure that encapsulates information about a disconnection event.
+ * Refer to Gap::onDisconnection().
+ */
struct DisconnectionCallbackParams_t {
- Handle_t handle;
- DisconnectionReason_t reason;
+ Handle_t handle; /**< The ID of the connection that caused the disconnection event */
+ DisconnectionReason_t reason; /**< The reason of the disconnection event */
+ /**
+ * Constructor for DisconnectionCallbackParams_t.
+ *
+ * @param[in] handleIn
+ * Value for DisconnectionCallbackParams_t::handle.
+ * @param[in] reasonIn
+ * Value for DisconnectionCallbackParams_t::reason.
+ */
DisconnectionCallbackParams_t(Handle_t handleIn,
DisconnectionReason_t reasonIn) :
handle(handleIn),
@@ -213,22 +285,63 @@
};
static const uint16_t UNIT_1_25_MS = 1250; /**< Number of microseconds in 1.25 milliseconds. */
+ /**
+ * Helper function to convert from units of milliseconds to GAP duration
+ * units.
+ *
+ * @param[in] durationInMillis
+ * The duration in milliseconds.
+ *
+ * @return The duration in GAP duration units.
+ */
static uint16_t MSEC_TO_GAP_DURATION_UNITS(uint32_t durationInMillis) {
return (durationInMillis * 1000) / UNIT_1_25_MS;
}
+ /**
+ * Type for the registered callbacks added to the timeout event callchain.
+ * Refer to Gap::onTimeout().
+ */
typedef FunctionPointerWithContext<TimeoutSource_t> TimeoutEventCallback_t;
+ /**
+ * Type for the timeout event callchain. Refer to Gap::onTimeout().
+ */
typedef CallChainOfFunctionPointersWithContext<TimeoutSource_t> TimeoutEventCallbackChain_t;
+ /**
+ * Type for the registered callbacks added to the connection event
+ * callchain. Refer to Gap::onConnection().
+ */
typedef FunctionPointerWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallback_t;
+ /**
+ * Type for the connection event callchain. Refer to Gap::onConnection().
+ */
typedef CallChainOfFunctionPointersWithContext<const ConnectionCallbackParams_t *> ConnectionEventCallbackChain_t;
+ /**
+ * Type for the registered callbacks added to the disconnection event
+ * callchain. Refer to Gap::onDisconnetion().
+ */
typedef FunctionPointerWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallback_t;
+ /**
+ * Type for the disconnection event callchain. Refer to Gap::onDisconnection().
+ */
typedef CallChainOfFunctionPointersWithContext<const DisconnectionCallbackParams_t*> DisconnectionEventCallbackChain_t;
+ /**
+ * Type for the handlers of radio notification callback events. Refer to
+ * Gap::onRadioNotification().
+ */
typedef FunctionPointerWithContext<bool> RadioNotificationEventCallback_t;
+ /**
+ * Type for the handlers of shutdown callback events. Refer to
+ * Gap::onShutdown().
+ */
typedef FunctionPointerWithContext<const Gap *> GapShutdownCallback_t;
+ /**
+ * Type for the shutdown event callchain. Refer to Gap::onShutdown().
+ */
typedef CallChainOfFunctionPointersWithContext<const Gap *> GapShutdownCallbackChain_t;
/*
@@ -239,6 +352,11 @@
* Set the BTLE MAC address and type. Please note that the address format is
* least significant byte first (LSB). Please refer to BLEProtocol::AddressBytes_t.
*
+ * @param[in] type
+ * The type of the BLE address to set.
+ * @param[in] address
+ * The BLE address to set.
+ *
* @return BLE_ERROR_NONE on success.
*/
virtual ble_error_t setAddress(BLEProtocol::AddressType_t type, const BLEProtocol::AddressBytes_t address) {
@@ -252,6 +370,11 @@
/**
* Fetch the BTLE MAC address and type.
*
+ * @param[out] typeP
+ * The current BLE address type.
+ * @param[out] address
+ * The current BLE address.
+ *
* @return BLE_ERROR_NONE on success.
*/
virtual ble_error_t getAddress(BLEProtocol::AddressType_t *typeP, BLEProtocol::AddressBytes_t address) {
@@ -263,28 +386,44 @@
}
/**
+ * Get the minimum advertising interval in milliseconds for connectable
+ * undirected and connectable directed event types supported by the
+ * underlying BLE stack.
+ *
* @return Minimum Advertising interval in milliseconds for connectable
- * undirected and connectable directed event types.
+ * undirected and connectable directed event types.
*/
virtual uint16_t getMinAdvertisingInterval(void) const {
return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
}
/**
+ * Get the minimum advertising interval in milliseconds for scannable
+ * undirected and non-connectable undirected even types supported by the
+ * underlying BLE stack.
+ *
* @return Minimum Advertising interval in milliseconds for scannable
- * undirected and non-connectable undirected event types.
+ * undirected and non-connectable undirected event types.
*/
virtual uint16_t getMinNonConnectableAdvertisingInterval(void) const {
return 0; /* Requesting action from porter(s): override this API if this capability is supported. */
}
/**
+ * Get the maximum advertising interval in milliseconds for all event types
+ * supported by the underlying BLE stack.
+ *
* @return Maximum Advertising interval in milliseconds.
*/
virtual uint16_t getMaxAdvertisingInterval(void) const {
return 0xFFFF; /* Requesting action from porter(s): override this API if this capability is supported. */
}
+ /**
+ * Stop advertising. The current advertising parameters remain in effect.
+ *
+ * @retval BLE_ERROR_NONE if successfully stopped advertising procedure.
+ */
virtual ble_error_t stopAdvertising(void) {
return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
}
@@ -301,17 +440,18 @@
/**
* Create a connection (GAP Link Establishment).
*
- * @param peerAddr
- * 48-bit address, LSB format.
- * @param peerAddrType
- * Address type of the peer.
- * @param connectionParams
- * Connection parameters.
- * @param scanParams
- * Paramters to be used while scanning for the peer.
+ * @param[in] peerAddr
+ * 48-bit address, LSB format.
+ * @param[in] peerAddrType
+ * Address type of the peer.
+ * @param[in] connectionParams
+ * Connection parameters.
+ * @param[in] scanParams
+ * Paramters to be used while scanning for the peer.
+ *
* @return BLE_ERROR_NONE if connection establishment procedure is started
- * successfully. The connectionCallChain (if set) will be invoked upon
- * a connection event.
+ * successfully. The connectionCallChain (if set) will be invoked upon
+ * a connection event.
*/
virtual ble_error_t connect(const BLEProtocol::AddressBytes_t peerAddr,
BLEProtocol::AddressType_t peerAddrType,
@@ -329,11 +469,12 @@
/**
* Create a connection (GAP Link Establishment).
*
- * \deprecated: This funtion overloads Gap::connect(const BLEProtocol::Address_t peerAddr,
- BLEProtocol::AddressType_t peerAddrType,
- const ConnectionParams_t *connectionParams,
- const GapScanningParams *scanParams)
- * to maintain backward compatibility for change from Gap::AddressType_t to BLEProtocol::AddressType_t
+ * @deprecated This funtion overloads Gap::connect(const BLEProtocol::Address_t peerAddr,
+ * BLEProtocol::AddressType_t peerAddrType,
+ * const ConnectionParams_t *connectionParams,
+ * const GapScanningParams *scanParams)
+ * to maintain backward compatibility for change from Gap::AddressType_t to
+ * BLEProtocol::AddressType_t.
*/
ble_error_t connect(const BLEProtocol::AddressBytes_t peerAddr,
DeprecatedAddressType_t peerAddrType,
@@ -348,8 +489,12 @@
* be communicated to the application with an invocation of the
* disconnectionCallback.
*
- * @param reason
- * The reason for disconnection; to be sent back to the peer.
+ * @param[in] reason
+ * The reason for disconnection; to be sent back to the peer.
+ * @param[in] connectionHandle
+ * The handle of the connection to disconnect from.
+ *
+ * @return BLE_ERROR_NONE if disconnection was successful.
*/
virtual ble_error_t disconnect(Handle_t connectionHandle, DisconnectionReason_t reason) {
/* avoid compiler warnings about unused variables */
@@ -364,13 +509,15 @@
* be communicated to the application with an invocation of the
* disconnectionCallback.
*
- * @param reason
- * The reason for disconnection; to be sent back to the peer.
+ * @param[in] reason
+ * The reason for disconnection; to be sent back to the peer.
+ *
+ * @return BLE_ERROR_NONE if disconnection was successful.
*
- * @note: This version of disconnect() doesn't take a connection handle. It
- * works reliably only for stacks that are limited to a single
- * connection. This API should be considered *deprecated* in favour of the
- * alternative, which takes a connection handle. It will be dropped in the future.
+ * @deprecated This version of disconnect() doesn't take a connection handle. It
+ * works reliably only for stacks that are limited to a single
+ * connection. Use instead Gap::disconnect(Handle_t connectionHandle,
+ * DisconnectionReason_t reason) instead.
*/
virtual ble_error_t disconnect(DisconnectionReason_t reason) {
/* Avoid compiler warnings about unused variables. */
@@ -389,7 +536,7 @@
* for this is owned by the caller.
*
* @return BLE_ERROR_NONE if the parameters were successfully filled into
- * the given structure pointed to by params.
+ * the given structure pointed to by params.
*/
virtual ble_error_t getPreferredConnectionParams(ConnectionParams_t *params) {
/* Avoid compiler warnings about unused variables. */
@@ -405,6 +552,9 @@
*
* @param[in] params
* The structure containing the desired parameters.
+ *
+ * @return BLE_ERROR_NONE if the preferred connection params were set
+ * correctly.
*/
virtual ble_error_t setPreferredConnectionParams(const ConnectionParams_t *params) {
/* Avoid compiler warnings about unused variables. */
@@ -414,16 +564,18 @@
}
/**
- * Update connection parameters.
- * In the central role this will initiate a Link Layer connection parameter update procedure.
- * In the peripheral role, this will send the corresponding L2CAP request and wait for
- * the central to perform the procedure.
+ * Update connection parameters. In the central role this will initiate a
+ * Link Layer connection parameter update procedure. In the peripheral role,
+ * this will send the corresponding L2CAP request and wait for the central
+ * to perform the procedure.
*
* @param[in] handle
* Connection Handle.
* @param[in] params
* Pointer to desired connection parameters. If NULL is provided on a peripheral role,
* the parameters in the PPCP characteristic of the GAP service will be used instead.
+ *
+ * @return BLE_ERROR_NONE if the connection parameters were updated correctly.
*/
virtual ble_error_t updateConnectionParams(Handle_t handle, const ConnectionParams_t *params) {
/* avoid compiler warnings about unused variables */
@@ -435,8 +587,11 @@
/**
* Set the device name characteristic in the GAP service.
+ *
* @param[in] deviceName
* The new value for the device-name. This is a UTF-8 encoded, <b>NULL-terminated</b> string.
+ *
+ * @return BLE_ERROR_NONE if the device name was set correctly.
*/
virtual ble_error_t setDeviceName(const uint8_t *deviceName) {
/* Avoid compiler warnings about unused variables. */
@@ -447,21 +602,25 @@
/**
* Get the value of the device name characteristic in the GAP service.
+ *
* @param[out] deviceName
* Pointer to an empty buffer where the UTF-8 *non NULL-
* terminated* string will be placed. Set this
* value to NULL in order to obtain the deviceName-length
* from the 'length' parameter.
*
- * @param[in/out] lengthP
+ * @param[in,out] lengthP
* (on input) Length of the buffer pointed to by deviceName;
* (on output) the complete device name length (without the
* null terminator).
*
+ * @return BLE_ERROR_NONE if the device name was fetched correctly from the
+ * underlying BLE stack.
+ *
* @note If the device name is longer than the size of the supplied buffer,
- * length will return the complete device name length, and not the
- * number of bytes actually returned in deviceName. The application may
- * use this information to retry with a suitable buffer size.
+ * length will return the complete device name length, and not the
+ * number of bytes actually returned in deviceName. The application may
+ * use this information to retry with a suitable buffer size.
*/
virtual ble_error_t getDeviceName(uint8_t *deviceName, unsigned *lengthP) {
/* avoid compiler warnings about unused variables */
@@ -473,8 +632,11 @@
/**
* Set the appearance characteristic in the GAP service.
+ *
* @param[in] appearance
* The new value for the device-appearance.
+ *
+ * @return BLE_ERROR_NONE if the new appearance was set correctly.
*/
virtual ble_error_t setAppearance(GapAdvertisingData::Appearance appearance) {
/* Avoid compiler warnings about unused variables. */
@@ -485,8 +647,12 @@
/**
* Get the appearance characteristic in the GAP service.
+ *
* @param[out] appearance
- * The new value for the device-appearance.
+ * The current device-appearance value.
+ *
+ * @return BLE_ERROR_NONE if the device-appearance was fetched correctly
+ * from the underlying BLE stack.
*/
virtual ble_error_t getAppearance(GapAdvertisingData::Appearance *appearanceP) {
/* Avoid compiler warnings about unused variables. */
@@ -497,7 +663,12 @@
/**
* Set the radio's transmit power.
- * @param[in] txPower Radio transmit power in dBm.
+ *
+ * @param[in] txPower
+ * Radio's transmit power in dBm.
+ *
+ * @return BLE_ERROR_NONE if the new radio's transmit power was set
+ * correctly.
*/
virtual ble_error_t setTxPower(int8_t txPower) {
/* Avoid compiler warnings about unused variables. */
@@ -523,8 +694,14 @@
}
/**
+ * Get the maximum size of the whitelist.
+ *
* @return Maximum size of the whitelist.
*
+ * @note If using mbed OS the size of the whitelist can be configured by
+ * setting the YOTTA_CFG_WHITELIST_MAX_SIZE macro in your yotta
+ * config file.
+ *
* @experimental
*/
virtual uint8_t getMaxWhitelistSize(void) const
@@ -536,7 +713,7 @@
* Get the internal whitelist to be used by the Link Layer when scanning,
* advertising or initiating a connection depending on the filter policies.
*
- * @param[in/out] whitelist
+ * @param[in,out] whitelist
* (on input) whitelist.capacity contains the maximum number
* of addresses to be returned.
* (on output) The populated whitelist with copies of the
@@ -674,6 +851,15 @@
protected:
/* Override the following in the underlying adaptation layer to provide the functionality of scanning. */
+
+ /**
+ * Start scanning procedure in the underlying BLE stack.
+ *
+ * @param[in] scanningParams
+ * The GAP scanning parameters.
+ *
+ * @return BLE_ERROR_NONE if the scan procedure started successfully.
+ */
virtual ble_error_t startRadioScan(const GapScanningParams &scanningParams) {
(void)scanningParams;
return BLE_ERROR_NOT_IMPLEMENTED; /* Requesting action from porter(s): override this API if this capability is supported. */
@@ -684,8 +870,10 @@
*/
public:
/**
- * Returns the current GAP state of the device using a bitmask that
+ * Get the current GAP state of the device using a bitmask that
* describes whether the device is advertising or connected.
+ *
+ * @return The current GAP state of the device.
*/
GapState_t getState(void) const {
return state;
@@ -693,12 +881,17 @@
/**
* Set the GAP advertising mode to use for this device.
+ *
+ * @param[in] advType
+ * The new type of the advertising packets.
*/
void setAdvertisingType(GapAdvertisingParams::AdvertisingType_t advType) {
_advParams.setAdvertisingType(advType);
}
/**
+ * Set the advertising interval.
+ *
* @param[in] interval
* Advertising interval in units of milliseconds. Advertising
* is disabled if interval is 0. If interval is smaller than
@@ -709,15 +902,15 @@
* This field must be set to 0 if connectionMode is equal
* to ADV_CONNECTABLE_DIRECTED.
*
- * @note: Decreasing this value will allow central devices to detect a
- * peripheral faster, at the expense of more power being used by the radio
- * due to the higher data transmit rate.
+ * @note Decreasing this value will allow central devices to detect a
+ * peripheral faster, at the expense of more power being used by the radio
+ * due to the higher data transmit rate.
*
- * @Note: [WARNING] This API previously used 0.625ms as the unit for its
- * 'interval' argument. That required an explicit conversion from
- * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
- * no longer required as the new units are milliseconds. Any application
- * code depending on the old semantics needs to be updated accordingly.
+ * @note [WARNING] This API previously used 0.625ms as the unit for its
+ * @p interval argument. That required an explicit conversion from
+ * milliseconds using Gap::MSEC_TO_GAP_DURATION_UNITS(). This conversion is
+ * no longer required as the new units are milliseconds. Any application
+ * code depending on the old semantics needs to be updated accordingly.
*/
void setAdvertisingInterval(uint16_t interval) {
if (interval == 0) {
@@ -729,6 +922,9 @@
}
/**
+ * Set the advertising timeout. The length of time to advertise for before
+ * a timeout event is generated.
+ *
* @param[in] timeout
* Advertising timeout (in seconds) between 0x1 and 0x3FFF (1
* and 16383). Use 0 to disable the advertising timeout.
@@ -739,6 +935,8 @@
/**
* Start advertising.
+ *
+ * @return BLE_ERROR_NONE if the device started advertising successfully.
*/
ble_error_t startAdvertising(void) {
setAdvertisingData(); /* Update the underlying stack. */
@@ -765,6 +963,9 @@
* The flags to be added. Please refer to
* GapAdvertisingData::Flags for valid flags. Multiple
* flags may be specified in combination.
+ *
+ * @return BLE_ERROR_NONE if the data was successfully added to the
+ * advertising payload.
*/
ble_error_t accumulateAdvertisingPayload(uint8_t flags) {
ble_error_t rc;
@@ -781,8 +982,11 @@
* as an additional 31 bytes if the advertising payload is too
* small.
*
- * @param app
- * The appearance of the peripheral.
+ * @param[in] app
+ * The appearance of the peripheral.
+ *
+ * @return BLE_ERROR_NONE if the data was successfully added to the
+ * advertising payload.
*/
ble_error_t accumulateAdvertisingPayload(GapAdvertisingData::Appearance app) {
setAppearance(app);
@@ -801,8 +1005,11 @@
* as an additional 31 bytes if the advertising payload is too
* small.
*
- * @param power
- * The max transmit power to be used by the controller (in dBm).
+ * @param[in] power
+ * The max transmit power to be used by the controller (in dBm).
+ *
+ * @return BLE_ERROR_NONE if the data was successfully added to the
+ * advertising payload.
*/
ble_error_t accumulateAdvertisingPayloadTxPower(int8_t power) {
ble_error_t rc;
@@ -819,9 +1026,12 @@
* The SCAN_RESPONSE message may be used as an additional 31 bytes if the
* advertising payload is too small.
*
- * @param type The type describing the variable length data.
- * @param data Data bytes.
- * @param len Length of data.
+ * @param[in] type
+ * The type describing the variable length data.
+ * @param[in] data
+ * Data bytes.
+ * @param[in] len
+ * Length of data.
*
* @return BLE_ERROR_NONE if the advertisement payload was updated based on
* matching AD type; otherwise, an appropriate error.
@@ -850,11 +1060,14 @@
* Update a particular ADV field in the advertising payload (based on
* matching type).
*
- * @param[in] type The ADV type field describing the variable length data.
- * @param[in] data Data bytes.
- * @param[in] len Length of data.
+ * @param[in] type
+ * The ADV type field describing the variable length data.
+ * @param[in] data
+ * Data bytes.
+ * @param[in] len
+ * Length of data.
*
- * @note: If advertisements are enabled, then the update will take effect immediately.
+ * @note If advertisements are enabled, then the update will take effect immediately.
*
* @return BLE_ERROR_NONE if the advertisement payload was updated based on
* matching AD type; otherwise, an appropriate error.
@@ -875,7 +1088,15 @@
/**
* Set up a particular, user-constructed advertisement payload for the
* underlying stack. It would be uncommon for this API to be used directly;
- * there are other APIs to build an advertisement payload (see above).
+ * there are other APIs to build an advertisement payload (refer to
+ * Gap::accumulateAdvertisingPayload()).
+ *
+ * @param[in] payload
+ * A reference to a user constructed advertisement
+ * payload.
+ *
+ * @return BLE_ERROR_NONE if the advertisement payload was successfully
+ * set.
*/
ble_error_t setAdvertisingPayload(const GapAdvertisingData &payload) {
_advPayload = payload;
@@ -883,8 +1104,11 @@
}
/**
- * @return Read back advertising data. Useful for storing and
- * restoring payload.
+ * Get a reference to the advertising payload.
+ *
+ * @return Read back advertising data.
+ *
+ * @note Useful for storing and restoring payload.
*/
const GapAdvertisingData &getAdvertisingPayload(void) const {
return _advPayload;
@@ -894,9 +1118,15 @@
* Accumulate a variable length byte-stream as an AD structure in the
* scanResponse payload.
*
- * @param[in] type The type describing the variable length data.
- * @param[in] data Data bytes.
- * @param[in] len Length of data.
+ * @param[in] type
+ * The type describing the variable length data.
+ * @param[in] data
+ * Data bytes.
+ * @param[in] len
+ * Length of data.
+ *
+ * @return BLE_ERROR_NONE if the data was successfully added to the scan
+ * response payload.
*/
ble_error_t accumulateScanResponse(GapAdvertisingData::DataType type, const uint8_t *data, uint8_t len) {
ble_error_t rc;
@@ -909,10 +1139,10 @@
/**
* Reset any scan response prepared from prior calls to
- * accumulateScanResponse().
+ * Gap::accumulateScanResponse().
*
- * Note: This should be followed by a call to setAdvertisingPayload() or
- * startAdvertising() before the update takes effect.
+ * @note This should be followed by a call to Gap::setAdvertisingPayload() or
+ * Gap::startAdvertising() before the update takes effect.
*/
void clearScanResponse(void) {
_scanResponse.clear();
@@ -921,6 +1151,7 @@
/**
* Set up parameters for GAP scanning (observer mode).
+ *
* @param[in] interval
* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
* @param[in] window
@@ -931,17 +1162,19 @@
* Set to True if active-scanning is required. This is used to fetch the
* scan response from a peer if possible.
*
- * The scanning window divided by the interval determines the duty cycle for
- * scanning. For example, if the interval is 100ms and the window is 10ms,
- * then the controller will scan for 10 percent of the time. It is possible
- * to have the interval and window set to the same value. In this case,
- * scanning is continuous, with a change of scanning frequency once every
- * interval.
+ * @return BLE_ERROR_NONE if the scan parameters were correctly set.
*
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
+ * @note The scanning window divided by the interval determines the duty cycle for
+ * scanning. For example, if the interval is 100ms and the window is 10ms,
+ * then the controller will scan for 10 percent of the time. It is possible
+ * to have the interval and window set to the same value. In this case,
+ * scanning is continuous, with a change of scanning frequency once every
+ * interval.
*
- * @Note: The scan interval and window are recommendations to the BLE stack.
+ * @note Once the scanning parameters have been configured, scanning can be
+ * enabled by using startScan().
+ *
+ * @note The scan interval and window are recommendations to the BLE stack.
*/
ble_error_t setScanParams(uint16_t interval = GapScanningParams::SCAN_INTERVAL_MAX,
uint16_t window = GapScanningParams::SCAN_WINDOW_MAX,
@@ -960,18 +1193,21 @@
/**
* Set up the scanInterval parameter for GAP scanning (observer mode).
+ *
* @param[in] interval
* Scan interval (in milliseconds) [valid values lie between 2.5ms and 10.24s].
*
- * The scanning window divided by the interval determines the duty cycle for
- * scanning. For example, if the interval is 100ms and the window is 10ms,
- * then the controller will scan for 10 percent of the time. It is possible
- * to have the interval and window set to the same value. In this case,
- * scanning is continuous, with a change of scanning frequency once every
- * interval.
+ * @return BLE_ERROR_NONE if the scan interval was correctly set.
*
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
+ * @note The scanning window divided by the interval determines the duty cycle for
+ * scanning. For example, if the interval is 100ms and the window is 10ms,
+ * then the controller will scan for 10 percent of the time. It is possible
+ * to have the interval and window set to the same value. In this case,
+ * scanning is continuous, with a change of scanning frequency once every
+ * interval.
+ *
+ * @note Once the scanning parameters have been configured, scanning can be
+ * enabled by using startScan().
*/
ble_error_t setScanInterval(uint16_t interval) {
return _scanningParams.setInterval(interval);
@@ -979,21 +1215,24 @@
/**
* Set up the scanWindow parameter for GAP scanning (observer mode).
+ *
* @param[in] window
* Scan Window (in milliseconds) [valid values lie between 2.5ms and 10.24s].
*
- * The scanning window divided by the interval determines the duty cycle for
- * scanning. For example, if the interval is 100ms and the window is 10ms,
- * then the controller will scan for 10 percent of the time. It is possible
- * to have the interval and window set to the same value. In this case,
- * scanning is continuous, with a change of scanning frequency once every
- * interval.
+ * @return BLE_ERROR_NONE if the scan window was correctly set.
*
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
+ * @note The scanning window divided by the interval determines the duty cycle for
+ * scanning. For example, if the interval is 100ms and the window is 10ms,
+ * then the controller will scan for 10 percent of the time. It is possible
+ * to have the interval and window set to the same value. In this case,
+ * scanning is continuous, with a change of scanning frequency once every
+ * interval.
*
- * If scanning is already active, the updated value of scanWindow will be
- * propagated to the underlying BLE stack.
+ * @note Once the scanning parameters have been configured, scanning can be
+ * enabled by using startScan().
+ *
+ * @note If scanning is already active, the updated value of scanWindow will be
+ * propagated to the underlying BLE stack.
*/
ble_error_t setScanWindow(uint16_t window) {
ble_error_t rc;
@@ -1011,14 +1250,17 @@
/**
* Set up parameters for GAP scanning (observer mode).
+ *
* @param[in] timeout
* Scan timeout (in seconds) between 0x0001 and 0xFFFF; 0x0000 disables the timeout.
*
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
+ * @return BLE_ERROR_NONE if the scan timeout was correctly set.
*
- * If scanning is already active, the updated value of scanTimeout will be
- * propagated to the underlying BLE stack.
+ * @note Once the scanning parameters have been configured, scanning can be
+ * enabled by using startScan().
+ *
+ * @note If scanning is already active, the updated value of scanTimeout will be
+ * propagated to the underlying BLE stack.
*/
ble_error_t setScanTimeout(uint16_t timeout) {
ble_error_t rc;
@@ -1035,16 +1277,19 @@
}
/**
- * Set up parameters for GAP scanning (observer mode).
+ * Modify the active scanning parameter for GAP scanning (observer mode).
+ * This is used to fetch the scan response from a peer if possible.
+ *
* @param[in] activeScanning
- * Set to True if active-scanning is required. This is used to fetch the
- * scan response from a peer if possible.
+ * Set to True if active-scanning is required.
*
- * Once the scanning parameters have been configured, scanning can be
- * enabled by using startScan().
+ * @return BLE_ERROR_NONE if active scanning was successfully set.
*
- * If scanning is already in progress, then active-scanning will be enabled
- * for the underlying BLE stack.
+ * @note Once the scanning parameters have been configured, scanning can be
+ * enabled by using startScan().
+ *
+ * @note If scanning is already in progress, then active-scanning will be enabled
+ * for the underlying BLE stack.
*/
ble_error_t setActiveScanning(bool activeScanning) {
_scanningParams.setActiveScanning(activeScanning);
@@ -1065,6 +1310,9 @@
* The application-specific callback to be invoked upon
* receiving every advertisement report. This can be passed in
* as NULL, in which case scanning may not be enabled at all.
+ *
+ * @return BLE_ERROR_NONE if the device successfully started the scan
+ * procedure.
*/
ble_error_t startScan(void (*callback)(const AdvertisementCallbackParams_t *params)) {
ble_error_t err = BLE_ERROR_NONE;
@@ -1079,7 +1327,19 @@
}
/**
- * Same as above, but this takes an (object, method) pair for a callback.
+ * Same Gap::startScan(), but allows the possibility to add an object
+ * reference and member function as handler for advertisement event
+ * callbacks.
+ *
+ * @param[in] object
+ * Pointer to the object of a class defining the member callback
+ * function (@p callbackMember).
+ * @param[in] callbackMember
+ * The member callback (within the context of an object) to be
+ * invoked.
+ *
+ * @return BLE_ERROR_NONE if the device successfully started the scan
+ * procedure.
*/
template<typename T>
ble_error_t startScan(T *object, void (T::*callbackMember)(const AdvertisementCallbackParams_t *params)) {
@@ -1116,21 +1376,58 @@
}
private:
+ /**
+ * Helper function used to set the advertising data in the underlying BLE stack.
+ *
+ * @return BLE_ERROR_NONE if the advertising data was successfully set.
+ */
ble_error_t setAdvertisingData(void) {
return setAdvertisingData(_advPayload, _scanResponse);
}
private:
+ /**
+ * Functionality that is BLE stack-dependent and must be implemented by the
+ * ported. This is a helper function to set the advertising data in the
+ * BLE stack.
+ *
+ * @param[in] advData
+ * The new advertising data.
+ * @param[in] scanResponse
+ * The new scan response data.
+ *
+ * @return BLE_ERROR_NONE if the advertising data was set successfully.
+ */
virtual ble_error_t setAdvertisingData(const GapAdvertisingData &advData, const GapAdvertisingData &scanResponse) = 0;
+
+ /**
+ * Functionality that is BLE stack-dependent and must be implemented by the
+ * ported. This is a helper function to start the advertising procedure in
+ * the underlying BLE stack.
+ *
+ * @param[in]
+ * The advertising parameters.
+ *
+ * @return BLE_ERROR_NONE if the advertising procedure was successfully
+ * started.
+ */
virtual ble_error_t startAdvertising(const GapAdvertisingParams &) = 0;
public:
/**
- * Accessors to read back currently active advertising params.
+ * Accessor to read back currently active advertising parameters.
+ *
+ * @return A reference to the current advertising parameters.
*/
GapAdvertisingParams &getAdvertisingParams(void) {
return _advParams;
}
+
+ /**
+ * A const alternative to Gap::getAdvertisingParams().
+ *
+ * @return A const reference to the current advertising parameters.
+ */
const GapAdvertisingParams &getAdvertisingParams(void) const {
return _advParams;
}
@@ -1140,6 +1437,9 @@
* the underlying stack. It would be uncommon for this API to be used
* directly; there are other APIs to tweak advertisement parameters
* individually.
+ *
+ * @param[in] newParams
+ * The new advertising parameters.
*/
void setAdvertisingParams(const GapAdvertisingParams &newParams) {
_advParams = newParams;
@@ -1150,17 +1450,24 @@
/**
* Set up a callback for timeout events. Refer to TimeoutSource_t for
* possible event types.
- * @note It is possible to unregister callbacks using onTimeout().detach(callback)
+ *
+ * @param[in] callback
+ * Event handler being registered.
+ *
+ * @note It is possible to unregister callbacks using onTimeout().detach(callback).
*/
void onTimeout(TimeoutEventCallback_t callback) {
timeoutCallbackChain.add(callback);
}
/**
- * @brief provide access to the callchain of timeout event callbacks
- * It is possible to register callbacks using onTimeout().add(callback);
- * It is possible to unregister callbacks using onTimeout().detach(callback)
- * @return The timeout event callbacks chain
+ * @brief Provide access to the callchain of timeout event callbacks.
+ *
+ * @note It is possible to register callbacks using onTimeout().add(callback).
+ *
+ * @note It is possible to unregister callbacks using onTimeout().detach(callback).
+ *
+ * @return A reference to the timeout event callbacks chain.
*/
TimeoutEventCallbackChain_t& onTimeout() {
return timeoutCallbackChain;
@@ -1168,18 +1475,41 @@
/**
* Append to a chain of callbacks to be invoked upon GAP connection.
+ *
+ * @param[in] callback
+ * Event handler being registered.
+ *
* @note It is possible to unregister callbacks using onConnection().detach(callback)
*/
- void onConnection(ConnectionEventCallback_t callback) {connectionCallChain.add(callback);}
-
- template<typename T>
- void onConnection(T *tptr, void (T::*mptr)(const ConnectionCallbackParams_t*)) {connectionCallChain.add(tptr, mptr);}
+ void onConnection(ConnectionEventCallback_t callback) {
+ connectionCallChain.add(callback);
+ }
/**
- * @brief provide access to the callchain of connection event callbacks
- * It is possible to register callbacks using onConnection().add(callback);
- * It is possible to unregister callbacks using onConnection().detach(callback)
- * @return The connection event callbacks chain
+ * Same Gap::onConnection(), but allows the possibility to add an object
+ * reference and member function as handler for connection event
+ * callbacks.
+ *
+ * @param[in] tptr
+ * Pointer to the object of a class defining the member callback
+ * function (@p mptr).
+ * @param[in] mptr
+ * The member callback (within the context of an object) to be
+ * invoked.
+ */
+ template<typename T>
+ void onConnection(T *tptr, void (T::*mptr)(const ConnectionCallbackParams_t*)) {
+ connectionCallChain.add(tptr, mptr);
+ }
+
+ /**
+ * @brief Provide access to the callchain of connection event callbacks.
+ *
+ * @return A reference to the connection event callbacks chain.
+ *
+ * @note It is possible to register callbacks using onConnection().add(callback).
+ *
+ * @note It is possible to unregister callbacks using onConnection().detach(callback).
*/
ConnectionEventCallbackChain_t& onConnection() {
return connectionCallChain;
@@ -1187,18 +1517,41 @@
/**
* Append to a chain of callbacks to be invoked upon GAP disconnection.
- * @note It is possible to unregister callbacks using onDisconnection().detach(callback)
+ *
+ * @param[in] callback
+ Event handler being registered.
+ *
+ * @note It is possible to unregister callbacks using onDisconnection().detach(callback).
*/
- void onDisconnection(DisconnectionEventCallback_t callback) {disconnectionCallChain.add(callback);}
-
- template<typename T>
- void onDisconnection(T *tptr, void (T::*mptr)(const DisconnectionCallbackParams_t*)) {disconnectionCallChain.add(tptr, mptr);}
+ void onDisconnection(DisconnectionEventCallback_t callback) {
+ disconnectionCallChain.add(callback);
+ }
/**
- * @brief provide access to the callchain of disconnection event callbacks
- * It is possible to register callbacks using onDisconnection().add(callback);
- * It is possible to unregister callbacks using onDisconnection().detach(callback)
- * @return The disconnection event callbacks chain
+ * Same Gap::onDisconnection(), but allows the possibility to add an object
+ * reference and member function as handler for disconnection event
+ * callbacks.
+ *
+ * @param[in] tptr
+ * Pointer to the object of a class defining the member callback
+ * function (@p mptr).
+ * @param[in] mptr
+ * The member callback (within the context of an object) to be
+ * invoked.
+ */
+ template<typename T>
+ void onDisconnection(T *tptr, void (T::*mptr)(const DisconnectionCallbackParams_t*)) {
+ disconnectionCallChain.add(tptr, mptr);
+ }
+
+ /**
+ * @brief Provide access to the callchain of disconnection event callbacks.
+ *
+ * @return A reference to the disconnection event callback chain.
+ *
+ * @note It is possible to register callbacks using onDisconnection().add(callback).
+ *
+ * @note It is possible to unregister callbacks using onDisconnection().detach(callback).
*/
DisconnectionEventCallbackChain_t& onDisconnection() {
return disconnectionCallChain;
@@ -1218,22 +1571,26 @@
* devices, to manage peak current drawn during periods when the radio is on,
* or to trigger sensor data collection for transmission in the Radio Event.
*
- * @param callback
- * The application handler to be invoked in response to a radio
- * ACTIVE/INACTIVE event.
- *
- * Or in the other version:
- *
- * @param tptr
- * Pointer to the object of a class defining the member callback
- * function (mptr).
- * @param mptr
- * The member callback (within the context of an object) to be
- * invoked in response to a radio ACTIVE/INACTIVE event.
+ * @param[in] callback
+ * The application handler to be invoked in response to a radio
+ * ACTIVE/INACTIVE event.
*/
void onRadioNotification(void (*callback)(bool param)) {
radioNotificationCallback.attach(callback);
}
+
+ /**
+ * Same as Gap::onRadioNotification(), but allows the posibility to
+ * register an object reference and member function as handler for radio
+ * notification events.
+ *
+ * @param[in] tptr
+ * Pointer to the object of a class defining the member callback
+ * function (@p mptr).
+ * @param[in] mptr
+ * The member callback (within the context of an object) to be
+ * invoked in response to a radio ACTIVE/INACTIVE event.
+ */
template <typename T>
void onRadioNotification(T *tptr, void (T::*mptr)(bool)) {
radioNotificationCallback.attach(tptr, mptr);
@@ -1244,28 +1601,48 @@
* Gap instance is about to shutdown (possibly as a result of a call
* to BLE::shutdown()).
*
- * @Note: It is possible to chain together multiple onShutdown callbacks
+ * @param[in] callback
+ * The handler that is being registered to be notified of
+ * shutdown events.
+ *
+ * @note It is possible to chain together multiple onShutdown callbacks
* (potentially from different modules of an application) to be notified
* before the Gap instance is shutdown.
*
- * @Note: It is also possible to set up a callback into a member function of
+ * @note It is also possible to set up a callback into a member function of
* some object.
*
- * @Note It is possible to unregister a callback using onShutdown().detach(callback)
+ * @note It is possible to unregister a callback using onShutdown().detach(callback)
*/
void onShutdown(const GapShutdownCallback_t& callback) {
shutdownCallChain.add(callback);
}
+
+ /**
+ * Same as Gap::onShutdown(), but allows the posibility to
+ * register an object reference and member function as handler for shutdown
+ * events.
+ *
+ * @param[in] objPtr
+ * Pointer to the object of a class defining the member callback
+ * function (@p memberPtr).
+ * @param[in] memberPtr
+ * The member callback (within the context of an object) to be
+ * invoked in response to a shutdown event.
+ */
template <typename T>
void onShutdown(T *objPtr, void (T::*memberPtr)(void)) {
shutdownCallChain.add(objPtr, memberPtr);
}
/**
- * @brief provide access to the callchain of shutdown event callbacks
- * It is possible to register callbacks using onShutdown().add(callback);
- * It is possible to unregister callbacks using onShutdown().detach(callback)
- * @return The shutdown event callbacks chain
+ * @brief Provide access to the callchain of shutdown event callbacks.
+ *
+ * @return A reference to the shutdown event callback chain.
+ *
+ * @note It is possible to register callbacks using onShutdown().add(callback).
+ *
+ * @note It is possible to unregister callbacks using onShutdown().detach(callback).
*/
GapShutdownCallbackChain_t& onShutdown() {
return shutdownCallChain;
@@ -1284,7 +1661,7 @@
*
* @return BLE_ERROR_NONE on success.
*
- * @note: Currently a call to reset() does not reset the advertising and
+ * @note Currently a call to reset() does not reset the advertising and
* scan parameters to default values.
*/
virtual ble_error_t reset(void) {
@@ -1314,6 +1691,9 @@
}
protected:
+ /**
+ * Construct a Gap instance.
+ */
Gap() :
_advParams(),
_advPayload(),
@@ -1332,6 +1712,26 @@
/* Entry points for the underlying stack to report events back to the user. */
public:
+ /**
+ * Helper function that notifies all registered handlers of an occurrence
+ * of a connection event. This function is meant to be called from the
+ * BLE stack specific implementation when a connection event occurs.
+ *
+ * @param[in] handle
+ * The ID of the connection that generated the event.
+ * @param[in] role
+ * The role of this BLE device in the connection.
+ * @param[in] peerAddrType
+ * The peer's BLE address type.
+ * @param[in] peerAddr
+ * The peer's BLE address.
+ * @param[in] ownAddrType
+ * This device's BLE address type.
+ * @param[in] ownAddr
+ * This device's BLE address.
+ * @param[in] connectionParams
+ * The parameters configured for this connection.
+ */
void processConnectionEvent(Handle_t handle,
Role_t role,
BLEProtocol::AddressType_t peerAddrType,
@@ -1344,12 +1744,40 @@
connectionCallChain.call(&callbackParams);
}
+ /**
+ * Helper function that notifies all registered handlers of an occurrence
+ * of a disconnection event. This function is meant to be called from the
+ * BLE stack specific implementation when a disconnection event occurs.
+ *
+ * @param[in] handle
+ * The ID of the connection that generated the event.
+ * @param[in] reason
+ * The reason for disconnection.
+ */
void processDisconnectionEvent(Handle_t handle, DisconnectionReason_t reason) {
state.connected = 0;
DisconnectionCallbackParams_t callbackParams(handle, reason);
disconnectionCallChain.call(&callbackParams);
}
+ /**
+ * Helper function that notifies the registered handler of a scanned
+ * advertisement packet. This function is meant to be called from the
+ * BLE stack specific implementation when a such event occurs.
+ *
+ * @param[in] peerAddr
+ * The peer's BLE address.
+ * @param[in] rssi
+ * The advertisement packet RSSI value.
+ * @param[in] isScanReponse
+ * Whether this packet is the response to a scan request.
+ * @param[in] type
+ * The type of advertisement.
+ * @param[in] advertisingDataLen
+ * Length of the advertisement data.
+ * @param[in] advertisingData
+ * Pointer to the advertisement packet's data.
+ */
void processAdvertisementReport(const BLEProtocol::AddressBytes_t peerAddr,
int8_t rssi,
bool isScanResponse,
@@ -1366,6 +1794,14 @@
onAdvertisementReport.call(¶ms);
}
+ /**
+ * Helper function that notifies all registered handlers of an occurrence
+ * of a timeout event. This function is meant to be called from the
+ * BLE stack specific implementation when a timeout event occurs.
+ *
+ * @param[in] source
+ * The source of the timout event.
+ */
void processTimeoutEvent(TimeoutSource_t source) {
if (timeoutCallbackChain) {
timeoutCallbackChain(source);
@@ -1373,22 +1809,64 @@
}
protected:
+ /**
+ * Currently set advertising parameters.
+ */
GapAdvertisingParams _advParams;
+ /**
+ * Currently set advertising data.
+ */
GapAdvertisingData _advPayload;
+ /**
+ * Currently set scanning parameters.
+ */
GapScanningParams _scanningParams;
+ /**
+ * Currently set scan response data.
+ */
GapAdvertisingData _scanResponse;
+ /**
+ * The current GAP state.
+ */
GapState_t state;
+ /**
+ * Whether active scanning is set. This is used to fetch the scan response
+ * from a peer if possible.
+ */
bool scanningActive;
protected:
+ /**
+ * Callchain containing all registered callback handlers for timeout
+ * events.
+ */
TimeoutEventCallbackChain_t timeoutCallbackChain;
+ /**
+ * The registered callback handler for radio notification events.
+ */
RadioNotificationEventCallback_t radioNotificationCallback;
+ /**
+ * The registered callback handler for scanned advertisement packet
+ * notifications.
+ */
AdvertisementReportCallback_t onAdvertisementReport;
+ /**
+ * Callchain containing all registered callback handlers for connection
+ * events.
+ */
ConnectionEventCallbackChain_t connectionCallChain;
+ /**
+ * Callchain containing all registered callback handlers for disconnection
+ * events.
+ */
DisconnectionEventCallbackChain_t disconnectionCallChain;
private:
+ /**
+ * Callchain containing all registered callback handlers for shutdown
+ * events.
+ */
GapShutdownCallbackChain_t shutdownCallChain;
private: