Yu Jiaqi
TEST_CODE_ApplyTo2V1_API
Dependencies: SDFileSystem max32630fthr USBDevice
Diff: DUT_RegConfig.cpp
- Revision:
- 1:7530b7eb757a
- Child:
- 3:35b05d91568d
diff -r 5a9619496af2 -r 7530b7eb757a DUT_RegConfig.cpp
--- /dev/null Thu Jan 01 00:00:00 1970 +0000
+++ b/DUT_RegConfig.cpp Thu May 28 02:30:39 2020 +0000
@@ -0,0 +1,555 @@
+#include "mbed.h"
+#include "cmsis_os.h"
+#include "max32630fthr.h"
+#include "USBSerial.h"
+#include "CmdHandler.h"
+#include "DUT_RegConfig.h"
+#include "ServoRun.h"
+#include "SDFileSystem.h"
+#include "Firmware.h"
+#include "RegTable.h"
+#include "CmdHandler.h"
+
+DUTREG dut_reg[DUT_REG_NUM];
+uint8_t Firmware[8192];
+uint8_t histogram[10][1024];
+uint8_t dcr_matrix[17][9*2];
+
+uint8_t int_mark = 0;
+uint8_t int_enable = 1;
+uint8_t histogram_mode = 0;
+uint8_t histogram_tdc = 0;
+
+Semaphore chip_int_semph(1);
+extern DigitalOut xSHUT;
+extern I2C i2c_v;
+
+uint16_t histogram_pos_num = 0;
+uint16_t histogram_per_pos = 0;
+
+extern const uint8_t reg_table[];
+extern const uint8_t Firmware_Ranging[];
+extern uint8_t _uart_send_pbuff[CMD_BUF_LEN] ;
+
+void ChipInitReset(void)
+{
+ xSHUT = 0;
+ wait_ms(30);
+ xSHUT = 1;
+}
+
+void DUT_RegInit(void)
+{
+ LoadRegTable();
+ for(uint16_t i = 0; i < 256; i++) {
+ //WriteOneReg(dut_reg[i].addr, dut_reg[i].value);
+ dut_reg[i].addr = i;
+ dut_reg[i].value = 0x00;
+ }
+}
+
+
+void DUT_FirmwareInit(void)
+{
+ WriteFW(LoadFirmware());
+}
+
+void Enable_DUT_Interrupt(void)
+{
+ int_enable = 1;
+}
+
+void Disable_DUT_Interrupt(void)
+{
+ int_enable = 0;
+}
+
+void InterruptHandle(void)
+{
+ if(int_enable == 0)
+ return;
+
+ if(int_mark == 1) {
+ int_mark = 0;
+ } else if(int_mark == 2) {
+ chip_int_semph.release();
+ //发送信号量
+ }
+}
+
+void HistogramReport()
+{
+ uint8_t ret = 0;
+ uint16_t lsb, mili;
+
+
+ uint16_t histogram_pos = 0;
+ uint16_t histogram_num = 0;
+ while(1) {
+ if(histogram_mode == 1) {
+ //ReadOneReg(REG_SYS_CFG, &sys_cfg_save);
+ //WriteOneReg(REG_SYS_CFG, 0x00);
+ ret = OneTimeMeasure(&lsb, &mili);
+ if(ret != 0) {
+ histogram_mode = 0;
+ } else {
+ ret = vangogh_ram_rd(histogram_tdc);
+ if(ret != 0) {
+ histogram_mode = 0;
+ } else {
+ HandleReadHistogram(histogram_tdc);
+ }
+ }
+ //WriteOneReg(REG_SYS_CFG, sys_cfg_save);
+ } else if(histogram_mode == 2) {
+ //ReadOneReg(REG_SYS_CFG, &sys_cfg_save);
+ //WriteOneReg(REG_SYS_CFG, 0x00);
+ ret = OneTimeMeasure(&lsb, &mili);
+ if(ret != 0) {
+ histogram_mode = 0;
+ } else {
+ for(uint8_t i = 0; i < 10; i++) {
+ ret = vangogh_ram_rd(i);
+ if(ret != 0) {
+ histogram_mode = 0;
+ break;
+ } else {
+ HandleReadHistogram(i);
+ wait_ms(1);
+ }
+ }
+ }
+ //WriteOneReg(REG_SYS_CFG, sys_cfg_save);
+ } else if(histogram_mode == 3) {
+
+
+ if(histogram_num >= histogram_per_pos) {
+ histogram_num = 0;
+ histogram_pos++;
+ if(histogram_pos >= histogram_pos_num) {
+ histogram_mode = 0;
+ }
+ ServoRun(1, 10);
+ while(CheckUntil()) wait_ms(100);
+ }
+ //ReadOneReg(REG_SYS_CFG, &sys_cfg_save);
+ //WriteOneReg(REG_SYS_CFG, 0x00);
+ ret = OneTimeMeasure(&lsb, &mili);
+ if(ret != 0) {
+ histogram_mode = 0;
+ } else {
+ for(uint8_t i = 0; i < 10; i++) {
+ ret = vangogh_ram_rd(i);
+ if(ret != 0) {
+ histogram_mode = 0;
+ break;
+ } else {
+ StoreHistogram(histogram_pos, histogram_num, i);
+ wait_ms(100);
+ }
+ }
+ }
+ //WriteOneReg(REG_SYS_CFG, sys_cfg_save);
+ histogram_num++;
+ } else if(histogram_mode == 4) {
+ //ReadOneReg(REG_SYS_CFG, &sys_cfg_save);
+ //WriteOneReg(REG_SYS_CFG, 0x00);
+ ret = OneTimeMeasure(&lsb, &mili);
+ if(ret != 0) {
+ histogram_mode = 0;
+ } else {
+ for(uint8_t i = 0; i < 9; i++) {
+ ret = vangogh_ram_rd(i);
+ if(ret != 0) {
+ histogram_mode = 0;
+ break;
+ } else {
+ HandleReadHistogram(i);
+ wait_ms(1);
+ }
+ }
+ }
+ //WriteOneReg(REG_SYS_CFG, sys_cfg_save);
+ }else {
+ histogram_num = 0;
+ histogram_pos = 0;
+ histogram_pos_num = 0;
+ histogram_per_pos = 0;
+ }
+ wait(1);
+ }
+}
+
+void ContinuousMeasureReport()
+{
+ uint16_t lsb, milimeter;
+ uint8_t int_flag = 0;
+ uint16_t time_out = 0;
+
+ while(1) {
+
+ chip_int_semph.wait();
+
+ if(RaadContinuousMeasure(&lsb, &milimeter) == 0) {
+ HandleContinuousMeasureReport(lsb, milimeter);
+ }
+
+ }
+}
+
+uint8_t WriteOneReg(uint8_t addr, uint8_t data)
+{
+ uint8_t buf[2];
+ buf[0] = addr;
+ buf[1] = data;
+
+ i2c_v.write(DUT_DEV_ADDR, (char*)buf, 2);
+
+ return 0;
+}
+
+uint8_t ReadOneReg(uint8_t addr, uint8_t *data)
+{
+ uint8_t buf[2];
+ buf[0] = addr;
+
+ i2c_v.write(DUT_DEV_ADDR, (char*)buf, 1);
+ i2c_v.read (DUT_DEV_ADDR, (char*)data, 1);
+
+ return 0;
+}
+
+
+uint8_t ReadAllRegToTable(void)
+{
+ for(uint16_t i = 0; i < DUT_REG_NUM; i++) {
+ ReadOneReg(dut_reg[i].addr, &(dut_reg[i].value));
+ }
+
+ return 0;
+}
+
+uint8_t WriteFW(uint16_t size)
+{
+ uint8_t ret = 0;
+ uint8_t i;
+ uint8_t reg_sys_cfg;
+ uint8_t uart_rx_data;
+ uint16_t fw_size = size;
+ uint16_t fw_send = 0;
+
+ ret = WriteOneReg(REG_PW_CTRL, 0x08);
+ ret = WriteOneReg(REG_PW_CTRL, 0x0a);
+ ret = WriteOneReg(REG_MCU_CFG, 0x02);
+ ret = ReadOneReg (REG_SYS_CFG, ®_sys_cfg);
+ ret = WriteOneReg(REG_SYS_CFG, reg_sys_cfg | (0x01<<0));
+ ret = WriteOneReg(REG_CMD, 0x01);
+ ret = WriteOneReg(REG_SIZE, 0x02);
+ ret = WriteOneReg(REG_SCRATCH_PAD_BASE+0x00, 0x00);
+ ret = WriteOneReg(REG_SCRATCH_PAD_BASE+0x01, 0x00);
+
+ while(fw_size >= 32) {
+ ret = WriteOneReg(REG_CMD,0x03);
+ ret = WriteOneReg(REG_SIZE,0x20);
+ for(i=0; i<32; i++) {
+ uart_rx_data = Firmware[fw_send++];
+ ret = WriteOneReg(REG_SCRATCH_PAD_BASE+i, uart_rx_data);
+ wait_us(5);
+ }
+ fw_size -= 32;
+ }
+ if(fw_size > 0) {
+ ret = WriteOneReg(REG_CMD,0x03);
+ ret = WriteOneReg(REG_SIZE,(uint8_t)fw_size);
+ for(i=0; i<fw_size; i++) {
+ uart_rx_data = Firmware[fw_send++];
+ ret = WriteOneReg(REG_SCRATCH_PAD_BASE+i, uart_rx_data);
+ wait_us(5);
+ }
+ }
+ ret = WriteOneReg(REG_SYS_CFG, reg_sys_cfg & ~(0x01<<0));
+ ret = WriteOneReg(REG_MCU_CFG, 0x03);
+ ret = WriteOneReg(REG_PW_CTRL, 0x02); //reset r_otp_ld_done, is a must
+ ret = WriteOneReg(REG_PW_CTRL, 0x00); //reset r_otp_ld_done, exit low power mode
+
+ return ret;
+}
+
+uint8_t vangogh_ram_rd(uint8_t tdc) //UART CMD foramt: CMD-1-byte|TDC-index-1-byte
+{
+ uint8_t ret = 0;
+ uint8_t i;
+ uint8_t j;
+ uint8_t reg_pw_ctrl;
+ uint8_t reg_sys_cfg;
+ uint8_t tdc_index = tdc;
+ uint16_t ram_addr_base = 0x1000 + 0x0400 * tdc_index;
+
+ ret = ReadOneReg (REG_SYS_CFG, ®_sys_cfg );
+ ret = WriteOneReg(REG_SYS_CFG, reg_sys_cfg | (0x01<<0));
+ ret = ReadOneReg (REG_PW_CTRL, ®_pw_ctrl);
+ ret = WriteOneReg(REG_PW_CTRL, reg_pw_ctrl | (0x01<<3)); //set otp_ld_done
+ ret = WriteOneReg(REG_PW_CTRL, reg_pw_ctrl | (0x01<<3) | (0x01<<1)); //set otp_ld_done, pw_ctrl_lp
+ ret = WriteOneReg(REG_CMD, 0x01);
+ ret = WriteOneReg(REG_SIZE, 0x02);
+ ret = WriteOneReg(REG_SCRATCH_PAD_BASE+0x00, *((uint8_t*)(&ram_addr_base) ));
+ ret = WriteOneReg(REG_SCRATCH_PAD_BASE+0x01, *((uint8_t*)(&ram_addr_base)+1));
+ wait_us(100);
+ for(j=0; j<32; j++) {
+ ret = WriteOneReg(REG_CMD,0x05); //Issue RAM read command
+ ret = WriteOneReg(REG_SIZE,0x20); //Issue RAM read command
+ wait_us(100);
+ for(i=0; i<32; i++) {
+ ret = ReadOneReg(0x0c+i, &histogram[tdc_index][32*j + i]);
+ }
+ }
+ ret = WriteOneReg(REG_SYS_CFG, reg_sys_cfg & ~(0x01<<0)); //clear sc_en
+ ret = WriteOneReg(REG_PW_CTRL, reg_pw_ctrl | (0x01<<1)); //restore power control register
+ ret = WriteOneReg(REG_PW_CTRL, reg_pw_ctrl & ~(0x01<<1)); //clear pw_ctrl_lp
+
+ return ret;
+}
+
+uint8_t OneTimeMeasure(uint16_t *lsb, uint16_t *milimeter)
+{
+ uint8_t ret = 0;
+ uint8_t reg_pw_ctrl;
+ uint8_t reg_sys_cfg;
+ uint32_t timeout = 0;
+
+ int_mark = 1;//One Time Measure
+
+ //ret = ReadOneReg (REG_SYS_CFG, ®_sys_cfg );
+ //ret = WriteOneReg(REG_SYS_CFG, reg_sys_cfg | (0x01<<0));
+ //ret = ReadOneReg (REG_PW_CTRL, ®_pw_ctrl);
+ //ret = WriteOneReg(REG_PW_CTRL, reg_pw_ctrl | (0x01<<3)); //set otp_ld_done
+ //ret = WriteOneReg(REG_PW_CTRL, (reg_pw_ctrl | (0x01<<3)) & ~(0x01<<1)); //set otp_ld_done, clear pw_ctrl_lp
+ ret = WriteOneReg(REG_CMD, 0x0E);
+ //ret = WriteOneReg(REG_SIZE, 0x00);
+
+ timeout = 1000;
+ while(int_mark == 1 && timeout != 0) {
+ timeout--;
+ wait_ms(5);
+ }
+
+ if(timeout == 0) {
+ return 1;
+
+ } else {
+
+ ret = ReadOneReg(0x0d, (uint8_t*)lsb);
+ ret = ReadOneReg(0x0e, (uint8_t*)lsb + 1);
+
+ ret = ReadOneReg(0x18, (uint8_t*)milimeter);
+ ret = ReadOneReg(0x19, (uint8_t*)milimeter + 1);
+
+ }
+
+ //ret = WriteOneReg(REG_SYS_CFG, reg_sys_cfg & ~(0x01<<0)); //clear sc_en
+ //ret = WriteOneReg(REG_PW_CTRL, reg_pw_ctrl | (0x01<<1)); //restore power control register
+ //ret = WriteOneReg(REG_PW_CTRL, reg_pw_ctrl & ~(0x01<<1)); //clear pw_ctrl_lp
+
+ return ret;
+}
+
+uint8_t ContinuousMeasure(void)
+{
+ uint8_t ret = 0;
+ uint8_t reg_pw_ctrl;
+ uint8_t reg_sys_cfg;
+
+ int_mark = 2;//Continuous Time Measure
+
+ //ret = ReadOneReg (REG_SYS_CFG, ®_sys_cfg );
+ //ret = WriteOneReg(REG_SYS_CFG, reg_sys_cfg | (0x01<<0));
+ //ret = ReadOneReg (REG_PW_CTRL, ®_pw_ctrl);
+ //ret = WriteOneReg(REG_PW_CTRL, reg_pw_ctrl | (0x01<<3)); //set otp_ld_done
+ //ret = WriteOneReg(REG_PW_CTRL, (reg_pw_ctrl | (0x01<<3)) & ~(0x01<<1)); //set otp_ld_done, clear pw_ctrl_lp
+ ret = WriteOneReg(REG_CMD, 0x0F);
+ //ret = WriteOneReg(REG_SIZE, 0x00);
+
+ //ret = WriteOneReg(REG_SYS_CFG, reg_sys_cfg & ~(0x01<<0)); //clear sc_en
+
+ return ret;
+}
+
+uint8_t RaadContinuousMeasure(uint16_t *lsb, uint16_t *milimeter)
+{
+ uint8_t ret = 0;
+ uint8_t reg_pw_ctrl;
+ uint8_t reg_sys_cfg;
+
+ int_mark = 2;//Continuous Time Measure
+
+ //ret = ReadOneReg (REG_SYS_CFG, ®_sys_cfg );
+ //ret = WriteOneReg(REG_SYS_CFG, reg_sys_cfg | (0x01<<0));
+ //ret = ReadOneReg (REG_PW_CTRL, ®_pw_ctrl);
+ //ret = WriteOneReg(REG_PW_CTRL, reg_pw_ctrl | (0x01<<3)); //set otp_ld_done
+ //ret = WriteOneReg(REG_PW_CTRL, (reg_pw_ctrl | (0x01<<3)) & ~(0x01<<1)); //set otp_ld_done, clear pw_ctrl_lp
+
+ ret = ReadOneReg(0x0d, (uint8_t*)lsb);
+ ret = ReadOneReg(0x0e, (uint8_t*)lsb + 1);
+
+ ret = ReadOneReg(0x18, (uint8_t*)milimeter);
+ ret = ReadOneReg(0x19, (uint8_t*)milimeter + 1);
+
+ //ret = WriteOneReg(REG_SYS_CFG, reg_sys_cfg & ~(0x01<<0)); //clear sc_en
+
+ return ret;
+}
+
+uint8_t StopContinuousMeasure()
+{
+ uint8_t ret = 0;
+ uint8_t reg_pw_ctrl;
+ uint8_t reg_sys_cfg;
+
+ int_mark = 0;//Continuous Time Measure
+
+ //ret = ReadOneReg (REG_SYS_CFG, ®_sys_cfg );
+ //ret = WriteOneReg(REG_SYS_CFG, reg_sys_cfg | (0x01<<0));
+ //ret = ReadOneReg (REG_PW_CTRL, ®_pw_ctrl);
+ //ret = WriteOneReg(REG_PW_CTRL, reg_pw_ctrl | (0x01<<3)); //set otp_ld_done
+ //ret = WriteOneReg(REG_PW_CTRL, (reg_pw_ctrl | (0x01<<3)) & ~(0x01<<1)); //set otp_ld_done, clear pw_ctrl_lp
+ ret = WriteOneReg(REG_CMD, 0x00);
+ ret = WriteOneReg(REG_SIZE, 0x00);
+
+ //ret = WriteOneReg(REG_SYS_CFG, reg_sys_cfg & ~(0x01<<0)); //clear sc_en
+ //ret = WriteOneReg(REG_PW_CTRL, reg_pw_ctrl | (0x01<<1)); //restore power control register
+ //ret = WriteOneReg(REG_PW_CTRL, reg_pw_ctrl & ~(0x01<<1)); //clear pw_ctrl_lp
+
+ return ret;
+}
+
+void StoreHistogram(uint16_t histogram_pos, uint16_t histogram_num, uint8_t tdc)
+{
+ /*
+ char file_name[20];
+
+ //sprintf(file_name, "/sd/hist_%d_%d_tdc%d", histogram_pos, histogram_num, tdc);
+ sprintf(file_name, "/sd/hello.txt");
+
+ FILE *fp = fopen(file_name, "w");
+ //for(uint32_t i = 0; i < 1024; i++) {
+ // fseek(fp,0,SEEK_END);
+ // fprintf(fp, "%02X ", histogram[tdc][i]);
+ //}
+ fprintf(fp, "hello ");
+
+ fflush(fp);
+ fclose(fp);
+ */
+
+ _uart_send_pbuff[0] = histogram_pos;
+ _uart_send_pbuff[1] = histogram_pos >> 8;
+
+ _uart_send_pbuff[2] = tdc;
+
+ _uart_send_pbuff[3] = histogram_num;
+ _uart_send_pbuff[4] = histogram_num >> 8;
+
+ memcpy(&_uart_send_pbuff[5], histogram[tdc], 1024);
+
+ UART_CmdAckSend(READ_CMD | 0x80, VAN_STEP_HISTOGRAM_CMD, _uart_send_pbuff, 1024 + 1 + 2 + 2);
+ //return 0;
+}
+
+uint8_t DCRTest(uint8_t vspad, uint8_t test_time)
+{
+ uint8_t ret = 0;
+ uint32_t timeout = 0;
+ memset(dcr_matrix, 0x00, 17*9*2);
+ WriteOneReg(0x50, 0x01);
+ WriteOneReg(0xBD, 0x01);
+ wait_ms(100);
+ WriteOneReg(0xD8, 0xF0);
+
+ for(uint8_t group = 0; group < 9; group++) {
+ WriteOneReg(0x0C, group);
+ wait_ms(1);
+ WriteOneReg(0x0D, test_time);
+ wait_ms(1);
+
+ timeout = 25;
+ int_mark = 1;
+ WriteOneReg(0x0A, 0x0C);
+ while(int_mark == 1 && timeout != 0) {
+ timeout--;
+ wait_ms(100);
+ }
+ //osDelay(80);
+ for(uint8_t pix = 0; pix < 17; pix++) {
+ ret = ReadOneReg(0x82 + pix*2, &dcr_matrix[pix][group*2 + 1]);
+ ret = ReadOneReg(0x82 + pix*2 + 1, &dcr_matrix[pix][group*2]);
+ //osDelay(1);
+ if(ret != 0)
+ return ret;
+ }
+
+ }
+
+ return 0;
+}
+
+uint8_t DelayLineTest(uint8_t phase, uint8_t* buf)
+{
+ uint8_t ret = 0;
+ uint32_t timeout = 0;
+
+ WriteOneReg(0xE4, phase);
+ wait_ms(10);
+
+ for(uint8_t step = 0; step < 8; step++) {
+ WriteOneReg(0xE1, 0x61 | (step << 1));
+ wait_ms(10);
+
+ timeout = 50;
+ int_mark = 1;
+ WriteOneReg(0x0A, 0x0B);
+ wait_ms(10);
+ while(int_mark == 1 && timeout != 0) {
+ timeout--;
+ wait_ms(100);
+ }
+ for(uint8_t tdc = 0; tdc < 9; tdc++) {
+ ret = ReadOneReg(0x0c + tdc*2, buf + step*18 + tdc*2 + 1);
+ wait_ms(1);
+ ret = ReadOneReg(0x0c + tdc*2 + 1, buf + step*18 + tdc*2);
+ wait_ms(1);
+ }
+
+ }
+
+ return 0;
+}
+
+uint8_t GetTdcPhase(uint8_t* buf)
+{
+ uint8_t ret = 0;
+ uint32_t timeout = 0;
+ memset(buf, 0x00, 10);
+
+ WriteOneReg(0x0C, 0x0C);
+ WriteOneReg(0x0A, 0x0A);
+ wait_ms(1);
+
+ timeout = 10;
+ int_mark = 1;
+ WriteOneReg(0x0A, 0x0B);
+ while(int_mark == 1 && timeout != 0) {
+ timeout--;
+ wait_ms(100);
+ }
+ //osDelay(80);
+
+ ret = ReadOneReg(0x0D, buf);
+ ret = ReadOneReg(0xE4, buf + 1);
+
+ if(ret != 0)
+ return ret;
+
+ return 0;
+}
+
+