nikos chalikias / mbed-HDK

mbed-HDK used 'as is' for n-U35 board. Just flash the lpc11u35_lpc1768_if_mbed.bin file to LPC11U35. It is in the LPC1768 directory, inside NXP directory

Fork of mbed-HDK by Mbed

Diff: NXP/LPC11U24-Lite/LPC11U24-Lite.sch

Revision:
4:f63d27107b43
Parent:
2:9aa761c69da4
Child:
7:7336d99ec4fa
--- a/NXP/LPC11U24-Lite/LPC11U24-Lite.sch	Sat Sep 14 09:08:13 2013 +0100
+++ b/NXP/LPC11U24-Lite/LPC11U24-Lite.sch	Sat Sep 14 09:12:55 2013 +0100
@@ -375,185 +375,6 @@
 <text x="-1.778" y="1.778" size="1.27" layer="25">&gt;NAME</text>
 <text x="-1.778" y="-3.048" size="1.27" layer="27">&gt;VALUE</text>
 </package>
-<package name="MBED-ICS_LQFP64">
-<circle x="-3.818" y="3.818" radius="0.254" width="0.127" layer="21"/>
-<wire x1="-5" y1="4" x2="-5" y2="-5" width="0.2032" layer="21"/>
-<wire x1="-5" y1="-5" x2="5" y2="-5" width="0.2032" layer="21"/>
-<wire x1="5" y1="-5" x2="5" y2="5" width="0.2032" layer="21"/>
-<wire x1="5" y1="5" x2="-4" y2="5" width="0.2032" layer="21"/>
-<wire x1="-4" y1="5" x2="-5" y2="4" width="0.2032" layer="21"/>
-<smd name="1" x="-5.7" y="3.75" dx="1.1" dy="0.285" layer="1"/>
-<smd name="2" x="-5.7" y="3.25" dx="1.1" dy="0.285" layer="1"/>
-<smd name="3" x="-5.7" y="2.75" dx="1.1" dy="0.285" layer="1"/>
-<smd name="4" x="-5.7" y="2.25" dx="1.1" dy="0.285" layer="1"/>
-<smd name="5" x="-5.7" y="1.75" dx="1.1" dy="0.285" layer="1"/>
-<smd name="6" x="-5.7" y="1.25" dx="1.1" dy="0.285" layer="1"/>
-<smd name="7" x="-5.7" y="0.75" dx="1.1" dy="0.285" layer="1"/>
-<smd name="8" x="-5.7" y="0.25" dx="1.1" dy="0.285" layer="1"/>
-<smd name="9" x="-5.7" y="-0.25" dx="1.1" dy="0.285" layer="1"/>
-<smd name="10" x="-5.7" y="-0.75" dx="1.1" dy="0.285" layer="1"/>
-<smd name="11" x="-5.7" y="-1.25" dx="1.1" dy="0.285" layer="1"/>
-<smd name="12" x="-5.7" y="-1.75" dx="1.1" dy="0.285" layer="1"/>
-<smd name="13" x="-5.7" y="-2.25" dx="1.1" dy="0.285" layer="1"/>
-<smd name="14" x="-5.7" y="-2.75" dx="1.1" dy="0.285" layer="1"/>
-<smd name="15" x="-5.7" y="-3.25" dx="1.1" dy="0.285" layer="1"/>
-<smd name="16" x="-5.7" y="-3.75" dx="1.1" dy="0.285" layer="1"/>
-<smd name="17" x="-3.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="18" x="-3.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="19" x="-2.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="20" x="-2.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="21" x="-1.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="22" x="-1.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="23" x="-0.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="24" x="-0.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="25" x="0.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="26" x="0.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="27" x="1.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="28" x="1.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="29" x="2.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="30" x="2.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="31" x="3.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="32" x="3.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="33" x="5.7" y="-3.75" dx="1.1" dy="0.285" layer="1"/>
-<smd name="34" x="5.7" y="-3.25" dx="1.1" dy="0.285" layer="1"/>
-<smd name="35" x="5.7" y="-2.75" dx="1.1" dy="0.285" layer="1"/>
-<smd name="36" x="5.7" y="-2.25" dx="1.1" dy="0.285" layer="1"/>
-<smd name="37" x="5.7" y="-1.75" dx="1.1" dy="0.285" layer="1"/>
-<smd name="38" x="5.7" y="-1.25" dx="1.1" dy="0.285" layer="1"/>
-<smd name="39" x="5.7" y="-0.75" dx="1.1" dy="0.285" layer="1"/>
-<smd name="40" x="5.7" y="-0.25" dx="1.1" dy="0.285" layer="1"/>
-<smd name="41" x="5.7" y="0.25" dx="1.1" dy="0.285" layer="1"/>
-<smd name="42" x="5.7" y="0.75" dx="1.1" dy="0.285" layer="1"/>
-<smd name="43" x="5.7" y="1.25" dx="1.1" dy="0.285" layer="1"/>
-<smd name="44" x="5.7" y="1.75" dx="1.1" dy="0.285" layer="1"/>
-<smd name="45" x="5.7" y="2.25" dx="1.1" dy="0.285" layer="1"/>
-<smd name="46" x="5.7" y="2.75" dx="1.1" dy="0.285" layer="1"/>
-<smd name="47" x="5.7" y="3.25" dx="1.1" dy="0.285" layer="1"/>
-<smd name="48" x="5.7" y="3.75" dx="1.1" dy="0.285" layer="1"/>
-<smd name="49" x="3.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="50" x="3.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="51" x="2.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="52" x="2.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="53" x="1.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="54" x="1.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="55" x="0.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="56" x="0.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="57" x="-0.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="58" x="-0.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="59" x="-1.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="60" x="-1.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="61" x="-2.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="62" x="-2.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="63" x="-3.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<smd name="64" x="-3.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
-<text x="-3.81" y="6.35" size="1.27" layer="25" ratio="12">&gt;NAME</text>
-<text x="-3.81" y="-7.62" size="1.27" layer="27" ratio="12">&gt;VALUE</text>
-</package>
-<package name="SWD-10-TAGCONNECT">
-<wire x1="-0.254" y1="3.683" x2="-0.254" y2="-0.127" width="0.127" layer="21"/>
-<wire x1="-0.254" y1="-0.127" x2="-0.254" y2="-3.683" width="0.127" layer="21"/>
-<wire x1="-0.254" y1="-3.683" x2="1.016" y2="-3.683" width="0.127" layer="21"/>
-<wire x1="1.016" y1="-3.683" x2="6.096" y2="-3.683" width="0.127" layer="21"/>
-<wire x1="6.096" y1="-3.683" x2="6.096" y2="3.683" width="0.127" layer="21"/>
-<wire x1="6.096" y1="3.683" x2="-0.254" y2="3.683" width="0.127" layer="21"/>
-<wire x1="1.016" y1="-3.683" x2="1.016" y2="-0.127" width="0.127" layer="21"/>
-<wire x1="1.016" y1="-0.127" x2="-0.254" y2="-0.127" width="0.127" layer="21"/>
-<smd name="P$1" x="0.381" y="-1.778" dx="2.794" dy="0.762" layer="1" rot="R90"/>
-<smd name="P$3" x="1.651" y="-1.778" dx="2.794" dy="0.762" layer="1" rot="R90"/>
-<smd name="P$2" x="0.381" y="1.778" dx="2.794" dy="0.762" layer="1" rot="R90"/>
-<smd name="P$4" x="1.651" y="1.778" dx="2.794" dy="0.762" layer="1" rot="R90"/>
-<smd name="P$5" x="2.921" y="-1.778" dx="2.794" dy="0.762" layer="1" rot="R90"/>
-<smd name="P$6" x="2.921" y="1.778" dx="2.794" dy="0.762" layer="1" rot="R90"/>
-<smd name="P$7" x="4.191" y="-1.778" dx="2.794" dy="0.762" layer="1" rot="R90"/>
-<smd name="P$8" x="4.191" y="1.778" dx="2.794" dy="0.762" layer="1" rot="R90"/>
-<smd name="P$9" x="5.461" y="-1.778" dx="2.794" dy="0.762" layer="1" rot="R90"/>
-<smd name="P$10" x="5.461" y="1.778" dx="2.794" dy="0.762" layer="1" rot="R90"/>
-<text x="0" y="-5.08" size="1.27" layer="25">&gt;NAME</text>
-<text x="0" y="-6.858" size="1.27" layer="27">&gt;VALUE</text>
-<hole x="-0.889" y="0" drill="1"/>
-<hole x="6.731" y="1.016" drill="1"/>
-<hole x="6.731" y="-1.016" drill="1"/>
-</package>
-<package name="SWD-10-SMD">
-<wire x1="-0.254" y1="3.683" x2="-0.254" y2="-0.381" width="0.127" layer="21"/>
-<wire x1="-0.254" y1="-0.381" x2="-0.254" y2="-3.683" width="0.127" layer="21"/>
-<wire x1="-0.254" y1="-3.683" x2="1.016" y2="-3.683" width="0.127" layer="21"/>
-<wire x1="1.016" y1="-3.683" x2="6.096" y2="-3.683" width="0.127" layer="21"/>
-<wire x1="6.096" y1="-3.683" x2="6.096" y2="3.683" width="0.127" layer="21"/>
-<wire x1="6.096" y1="3.683" x2="-0.254" y2="3.683" width="0.127" layer="21"/>
-<wire x1="1.016" y1="-3.683" x2="1.016" y2="-0.381" width="0.127" layer="21"/>
-<wire x1="1.016" y1="-0.381" x2="-0.254" y2="-0.381" width="0.127" layer="21"/>
-<smd name="P$1" x="0.381" y="-2.032" dx="2.794" dy="0.762" layer="1" rot="R90"/>
-<smd name="P$3" x="1.651" y="-2.032" dx="2.794" dy="0.762" layer="1" rot="R90"/>
-<smd name="P$2" x="0.381" y="2.032" dx="2.794" dy="0.762" layer="1" rot="R90"/>
-<smd name="P$4" x="1.651" y="2.032" dx="2.794" dy="0.762" layer="1" rot="R90"/>
-<smd name="P$5" x="2.921" y="-2.032" dx="2.794" dy="0.762" layer="1" rot="R90"/>
-<smd name="P$6" x="2.921" y="2.032" dx="2.794" dy="0.762" layer="1" rot="R90"/>
-<smd name="P$7" x="4.191" y="-2.032" dx="2.794" dy="0.762" layer="1" rot="R90"/>
-<smd name="P$8" x="4.191" y="2.032" dx="2.794" dy="0.762" layer="1" rot="R90"/>
-<smd name="P$9" x="5.461" y="-2.032" dx="2.794" dy="0.762" layer="1" rot="R90"/>
-<smd name="P$10" x="5.461" y="2.032" dx="2.794" dy="0.762" layer="1" rot="R90"/>
-<text x="0" y="-5.08" size="1.27" layer="25">&gt;NAME</text>
-<text x="0" y="-6.858" size="1.27" layer="27">&gt;VALUE</text>
-</package>
-<package name="SWD-10-PTH">
-<wire x1="2.032" y1="1.27" x2="2.032" y2="-6.35" width="0.254" layer="21"/>
-<wire x1="2.032" y1="-6.35" x2="-0.762" y2="-6.35" width="0.254" layer="21"/>
-<wire x1="-0.762" y1="-6.35" x2="-0.762" y2="1.27" width="0.254" layer="21"/>
-<wire x1="-0.762" y1="1.27" x2="-0.758" y2="1.27" width="0.254" layer="21"/>
-<wire x1="-0.758" y1="1.27" x2="2.048" y2="1.28" width="0.254" layer="21"/>
-<wire x1="-0.758" y1="1.27" x2="2.032" y2="1.27" width="0.254" layer="21"/>
-<wire x1="-1.852" y1="-8.61" x2="-1.852" y2="3.46" width="0.254" layer="21"/>
-<wire x1="3.138" y1="-8.62" x2="3.138" y2="3.46" width="0.254" layer="21"/>
-<wire x1="-1.842" y1="3.49" x2="3.092" y2="3.49" width="0.254" layer="21"/>
-<wire x1="-1.842" y1="-8.61" x2="3.092" y2="-8.61" width="0.254" layer="21"/>
-<wire x1="-1.59" y1="-3.922" x2="-1.59" y2="-1.128" width="0.4064" layer="21"/>
-<pad name="4" x="1.27" y="-1.27" drill="0.6096" diameter="0.9" rot="R90"/>
-<pad name="1" x="0" y="0" drill="0.6096" diameter="0.9" rot="R180"/>
-<pad name="2" x="1.27" y="0" drill="0.6096" diameter="0.9" rot="R90"/>
-<pad name="3" x="0" y="-1.27" drill="0.6096" diameter="0.9" rot="R90"/>
-<pad name="5" x="0" y="-2.54" drill="0.6096" diameter="0.9" rot="R90"/>
-<pad name="6" x="1.27" y="-2.54" drill="0.6096" diameter="0.9" rot="R90"/>
-<pad name="7" x="0" y="-3.81" drill="0.6096" diameter="0.9" rot="R90"/>
-<pad name="8" x="1.27" y="-3.81" drill="0.6096" diameter="0.9" rot="R90"/>
-<pad name="9" x="0" y="-5.08" drill="0.6096" diameter="0.9" rot="R90"/>
-<pad name="10" x="1.27" y="-5.08" drill="0.6096" diameter="0.9" rot="R90"/>
-<text x="-1.317" y="1.818" size="1.016" layer="21">1</text>
-<text x="-1.27" y="3.81" size="1.016" layer="25">&gt;NAME</text>
-<rectangle x1="-0.254" y1="-0.254" x2="0.254" y2="0.254" layer="51"/>
-<rectangle x1="-0.254" y1="-1.524" x2="0.254" y2="-1.016" layer="51"/>
-<rectangle x1="1.016" y1="-0.254" x2="1.524" y2="0.254" layer="51"/>
-<rectangle x1="1.016" y1="-1.524" x2="1.524" y2="-1.016" layer="51"/>
-<rectangle x1="-0.254" y1="-2.794" x2="0.254" y2="-2.286" layer="51"/>
-<rectangle x1="1.016" y1="-2.794" x2="1.524" y2="-2.286" layer="51"/>
-<rectangle x1="-0.254" y1="-4.064" x2="0.254" y2="-3.556" layer="51"/>
-<rectangle x1="1.016" y1="-4.064" x2="1.524" y2="-3.556" layer="51"/>
-<rectangle x1="-0.254" y1="-5.334" x2="0.254" y2="-4.826" layer="51"/>
-<rectangle x1="1.016" y1="-5.334" x2="1.524" y2="-4.826" layer="51"/>
-</package>
-<package name="DTSM-32S-B">
-<smd name="P$1" x="-2.7" y="0" dx="1.6" dy="2" layer="1" rot="R90"/>
-<smd name="P$2" x="2.7" y="0" dx="1.6" dy="2" layer="1" rot="R90"/>
-<wire x1="-3" y1="1.8" x2="3" y2="1.8" width="0.127" layer="21"/>
-<wire x1="3" y1="1.8" x2="3" y2="1" width="0.127" layer="21"/>
-<wire x1="-3" y1="1.8" x2="-3" y2="1" width="0.127" layer="21"/>
-<wire x1="-3" y1="-1.8" x2="3" y2="-1.8" width="0.127" layer="21"/>
-<wire x1="3" y1="-1.8" x2="3" y2="-1" width="0.127" layer="21"/>
-<wire x1="-3" y1="-1.8" x2="-3" y2="-1" width="0.127" layer="21"/>
-<wire x1="-1.3" y1="0" x2="-0.4" y2="0" width="0.127" layer="21"/>
-<wire x1="1.4" y1="0" x2="0.5" y2="0" width="0.127" layer="21"/>
-<wire x1="-0.4" y1="0" x2="0.5" y2="0.4" width="0.127" layer="21"/>
-<text x="-2.54" y="-3.81" size="1.016" layer="25" font="vector" ratio="12">&gt;NAME</text>
-</package>
-<package name="SKRKAEE010">
-<smd name="P$1" x="-2.1" y="0" dx="0.8" dy="2" layer="1"/>
-<smd name="P$2" x="2.1" y="0" dx="0.8" dy="2" layer="1"/>
-<wire x1="-1.5" y1="1.1" x2="1.5" y2="1.1" width="0.1" layer="21"/>
-<wire x1="1.5" y1="1.1" x2="1.5" y2="-1.1" width="0.1" layer="21"/>
-<wire x1="1.5" y1="-1.1" x2="-1.5" y2="-1.1" width="0.1" layer="21"/>
-<wire x1="-1.5" y1="-1.1" x2="-1.5" y2="1.1" width="0.1" layer="21"/>
-<text x="-2.54" y="-2.54" size="1.016" layer="21" font="vector" ratio="12">&gt;NAME</text>
-</package>
 <package name="USB-A-H">
 <description>&lt;b&gt;USB Series A Hole Mounted&lt;/b&gt;</description>
 <wire x1="3.6957" y1="6.5659" x2="-10.287" y2="6.5659" width="0.127" layer="21"/>
@@ -655,6 +476,103 @@
 <pad name="VBUS" x="2.7178" y="4.7625" drill="0.9144" rot="R270"/>
 <text x="6.985" y="-5.08" size="1.27" layer="25" rot="R90">&gt;NAME</text>
 </package>
+<package name="MBED-ICS_LQFP64">
+<circle x="-3.818" y="3.818" radius="0.254" width="0.127" layer="21"/>
+<wire x1="-5" y1="4" x2="-5" y2="-5" width="0.2032" layer="21"/>
+<wire x1="-5" y1="-5" x2="5" y2="-5" width="0.2032" layer="21"/>
+<wire x1="5" y1="-5" x2="5" y2="5" width="0.2032" layer="21"/>
+<wire x1="5" y1="5" x2="-4" y2="5" width="0.2032" layer="21"/>
+<wire x1="-4" y1="5" x2="-5" y2="4" width="0.2032" layer="21"/>
+<smd name="1" x="-5.7" y="3.75" dx="1.1" dy="0.285" layer="1"/>
+<smd name="2" x="-5.7" y="3.25" dx="1.1" dy="0.285" layer="1"/>
+<smd name="3" x="-5.7" y="2.75" dx="1.1" dy="0.285" layer="1"/>
+<smd name="4" x="-5.7" y="2.25" dx="1.1" dy="0.285" layer="1"/>
+<smd name="5" x="-5.7" y="1.75" dx="1.1" dy="0.285" layer="1"/>
+<smd name="6" x="-5.7" y="1.25" dx="1.1" dy="0.285" layer="1"/>
+<smd name="7" x="-5.7" y="0.75" dx="1.1" dy="0.285" layer="1"/>
+<smd name="8" x="-5.7" y="0.25" dx="1.1" dy="0.285" layer="1"/>
+<smd name="9" x="-5.7" y="-0.25" dx="1.1" dy="0.285" layer="1"/>
+<smd name="10" x="-5.7" y="-0.75" dx="1.1" dy="0.285" layer="1"/>
+<smd name="11" x="-5.7" y="-1.25" dx="1.1" dy="0.285" layer="1"/>
+<smd name="12" x="-5.7" y="-1.75" dx="1.1" dy="0.285" layer="1"/>
+<smd name="13" x="-5.7" y="-2.25" dx="1.1" dy="0.285" layer="1"/>
+<smd name="14" x="-5.7" y="-2.75" dx="1.1" dy="0.285" layer="1"/>
+<smd name="15" x="-5.7" y="-3.25" dx="1.1" dy="0.285" layer="1"/>
+<smd name="16" x="-5.7" y="-3.75" dx="1.1" dy="0.285" layer="1"/>
+<smd name="17" x="-3.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="18" x="-3.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="19" x="-2.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="20" x="-2.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="21" x="-1.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="22" x="-1.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="23" x="-0.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="24" x="-0.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="25" x="0.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="26" x="0.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="27" x="1.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="28" x="1.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="29" x="2.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="30" x="2.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="31" x="3.25" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="32" x="3.75" y="-5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="33" x="5.7" y="-3.75" dx="1.1" dy="0.285" layer="1"/>
+<smd name="34" x="5.7" y="-3.25" dx="1.1" dy="0.285" layer="1"/>
+<smd name="35" x="5.7" y="-2.75" dx="1.1" dy="0.285" layer="1"/>
+<smd name="36" x="5.7" y="-2.25" dx="1.1" dy="0.285" layer="1"/>
+<smd name="37" x="5.7" y="-1.75" dx="1.1" dy="0.285" layer="1"/>
+<smd name="38" x="5.7" y="-1.25" dx="1.1" dy="0.285" layer="1"/>
+<smd name="39" x="5.7" y="-0.75" dx="1.1" dy="0.285" layer="1"/>
+<smd name="40" x="5.7" y="-0.25" dx="1.1" dy="0.285" layer="1"/>
+<smd name="41" x="5.7" y="0.25" dx="1.1" dy="0.285" layer="1"/>
+<smd name="42" x="5.7" y="0.75" dx="1.1" dy="0.285" layer="1"/>
+<smd name="43" x="5.7" y="1.25" dx="1.1" dy="0.285" layer="1"/>
+<smd name="44" x="5.7" y="1.75" dx="1.1" dy="0.285" layer="1"/>
+<smd name="45" x="5.7" y="2.25" dx="1.1" dy="0.285" layer="1"/>
+<smd name="46" x="5.7" y="2.75" dx="1.1" dy="0.285" layer="1"/>
+<smd name="47" x="5.7" y="3.25" dx="1.1" dy="0.285" layer="1"/>
+<smd name="48" x="5.7" y="3.75" dx="1.1" dy="0.285" layer="1"/>
+<smd name="49" x="3.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="50" x="3.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="51" x="2.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="52" x="2.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="53" x="1.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="54" x="1.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="55" x="0.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="56" x="0.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="57" x="-0.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="58" x="-0.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="59" x="-1.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="60" x="-1.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="61" x="-2.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="62" x="-2.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="63" x="-3.25" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<smd name="64" x="-3.75" y="5.7" dx="1.1" dy="0.285" layer="1" rot="R90"/>
+<text x="-3.81" y="6.35" size="1.27" layer="25" ratio="12">&gt;NAME</text>
+<text x="-3.81" y="-7.62" size="1.27" layer="27" ratio="12">&gt;VALUE</text>
+</package>
+<package name="DTSM-32S-B">
+<smd name="P$1" x="-2.7" y="0" dx="1.6" dy="2" layer="1" rot="R90"/>
+<smd name="P$2" x="2.7" y="0" dx="1.6" dy="2" layer="1" rot="R90"/>
+<wire x1="-3" y1="1.8" x2="3" y2="1.8" width="0.127" layer="21"/>
+<wire x1="3" y1="1.8" x2="3" y2="1" width="0.127" layer="21"/>
+<wire x1="-3" y1="1.8" x2="-3" y2="1" width="0.127" layer="21"/>
+<wire x1="-3" y1="-1.8" x2="3" y2="-1.8" width="0.127" layer="21"/>
+<wire x1="3" y1="-1.8" x2="3" y2="-1" width="0.127" layer="21"/>
+<wire x1="-3" y1="-1.8" x2="-3" y2="-1" width="0.127" layer="21"/>
+<wire x1="-1.3" y1="0" x2="-0.4" y2="0" width="0.127" layer="21"/>
+<wire x1="1.4" y1="0" x2="0.5" y2="0" width="0.127" layer="21"/>
+<wire x1="-0.4" y1="0" x2="0.5" y2="0.4" width="0.127" layer="21"/>
+<text x="-2.54" y="-3.81" size="1.016" layer="25" font="vector" ratio="12">&gt;NAME</text>
+</package>
+<package name="SKRKAEE010">
+<smd name="P$1" x="-2.1" y="0" dx="0.8" dy="2" layer="1"/>
+<smd name="P$2" x="2.1" y="0" dx="0.8" dy="2" layer="1"/>
+<wire x1="-1.5" y1="1.1" x2="1.5" y2="1.1" width="0.1" layer="21"/>
+<wire x1="1.5" y1="1.1" x2="1.5" y2="-1.1" width="0.1" layer="21"/>
+<wire x1="1.5" y1="-1.1" x2="-1.5" y2="-1.1" width="0.1" layer="21"/>
+<wire x1="-1.5" y1="-1.1" x2="-1.5" y2="1.1" width="0.1" layer="21"/>
+<text x="-2.54" y="-2.54" size="1.016" layer="21" font="vector" ratio="12">&gt;NAME</text>
+</package>
 <package name="MBED-ENABLED-LOGO-250X250-MIL">
 <rectangle x1="-0.0127" y1="-0.01143125" x2="6.3373" y2="0.01143125" layer="21"/>
 <rectangle x1="-0.0127" y1="0.01143125" x2="6.3373" y2="0.03454375" layer="21"/>
@@ -4362,6 +4280,17 @@
 <pin name="1" x="0" y="2.54" visible="off" length="point" direction="pas" rot="R270"/>
 <pin name="2" x="0" y="-2.54" visible="off" length="point" direction="pas" rot="R90"/>
 </symbol>
+<symbol name="USB-1">
+<wire x1="5.08" y1="8.89" x2="0" y2="8.89" width="0.254" layer="94"/>
+<wire x1="0" y1="8.89" x2="0" y2="-1.27" width="0.254" layer="94"/>
+<wire x1="0" y1="-1.27" x2="5.08" y2="-1.27" width="0.254" layer="94"/>
+<text x="3.81" y="0" size="2.54" layer="94" rot="R90">USB</text>
+<pin name="D+" x="-2.54" y="7.62" visible="pad" length="short"/>
+<pin name="D-" x="-2.54" y="5.08" visible="pad" length="short"/>
+<pin name="GND" x="-2.54" y="0" visible="pad" length="short"/>
+<pin name="VBUS" x="-2.54" y="2.54" visible="pad" length="short"/>
+<text x="0" y="10.16" size="1.778" layer="95">&gt;NAME</text>
+</symbol>
 <symbol name="MBED_HDK">
 <wire x1="0" y1="0" x2="0" y2="190.5" width="0.3048" layer="94"/>
 <wire x1="0" y1="190.5" x2="276.86" y2="190.5" width="0.3048" layer="94"/>
@@ -4460,34 +4389,6 @@
 <text x="-3.556" y="4.826" size="1.778" layer="96">&gt;VALUE</text>
 <pin name="+3,3V" x="0" y="0" visible="off" length="short" direction="sup" rot="R90"/>
 </symbol>
-<symbol name="SWD-10">
-<wire x1="0" y1="20.32" x2="0" y2="0" width="0.254" layer="94"/>
-<wire x1="0" y1="0" x2="22.86" y2="0" width="0.254" layer="94"/>
-<wire x1="22.86" y1="0" x2="22.86" y2="20.32" width="0.254" layer="94"/>
-<wire x1="22.86" y1="20.32" x2="0" y2="20.32" width="0.254" layer="94"/>
-<text x="0" y="21.59" size="1.778" layer="95">&gt;NAME</text>
-<text x="7.62" y="16.51" size="1.778" layer="94">SWD-10</text>
-<text x="1.27" y="12.7" size="1.4224" layer="94">VCC</text>
-<text x="21.59" y="13.97" size="1.4224" layer="94" rot="R180">SWDIO/TMS</text>
-<text x="1.27" y="10.16" size="1.4224" layer="94">GND</text>
-<text x="1.27" y="7.62" size="1.4224" layer="94">GND</text>
-<text x="1.27" y="2.54" size="1.4224" layer="94">GND</text>
-<text x="21.59" y="3.81" size="1.4224" layer="94" rot="R180">RESET</text>
-<text x="21.59" y="6.35" size="1.4224" layer="94" rot="R180">NC/TDI</text>
-<text x="1.27" y="5.08" size="1.4224" layer="94">KEY</text>
-<text x="21.59" y="8.89" size="1.4224" layer="94" rot="R180">SWO/TDO</text>
-<text x="21.59" y="11.43" size="1.4224" layer="94" rot="R180">SWCLK/TCLK</text>
-<pin name="P$1" x="-5.08" y="12.7" visible="off" length="middle"/>
-<pin name="P$2" x="27.94" y="12.7" visible="off" length="middle" rot="R180"/>
-<pin name="P$3" x="-5.08" y="10.16" visible="off" length="middle"/>
-<pin name="P$4" x="27.94" y="10.16" visible="off" length="middle" rot="R180"/>
-<pin name="P$5" x="-5.08" y="7.62" visible="off" length="middle"/>
-<pin name="P$6" x="27.94" y="7.62" visible="off" length="middle" rot="R180"/>
-<pin name="P$7" x="-5.08" y="5.08" visible="off" length="middle"/>
-<pin name="P$8" x="27.94" y="5.08" visible="off" length="middle" rot="R180"/>
-<pin name="P$9" x="-5.08" y="2.54" visible="off" length="middle"/>
-<pin name="P$10" x="27.94" y="2.54" visible="off" length="middle" rot="R180"/>
-</symbol>
 <symbol name="TS">
 <wire x1="-3.175" y1="0" x2="-2.54" y2="0" width="0.254" layer="94"/>
 <wire x1="2.54" y1="0" x2="3.175" y2="0" width="0.254" layer="94"/>
@@ -4505,17 +4406,6 @@
 <pin name="P" x="-5.08" y="0" visible="off" length="short" direction="pas"/>
 <pin name="S" x="5.08" y="0" visible="off" length="short" direction="pas" rot="R180"/>
 </symbol>
-<symbol name="USB-1">
-<wire x1="5.08" y1="8.89" x2="0" y2="8.89" width="0.254" layer="94"/>
-<wire x1="0" y1="8.89" x2="0" y2="-1.27" width="0.254" layer="94"/>
-<wire x1="0" y1="-1.27" x2="5.08" y2="-1.27" width="0.254" layer="94"/>
-<text x="3.81" y="0" size="2.54" layer="94" rot="R90">USB</text>
-<pin name="D+" x="-2.54" y="7.62" visible="pad" length="short"/>
-<pin name="D-" x="-2.54" y="5.08" visible="pad" length="short"/>
-<pin name="GND" x="-2.54" y="0" visible="pad" length="short"/>
-<pin name="VBUS" x="-2.54" y="2.54" visible="pad" length="short"/>
-<text x="0" y="10.16" size="1.778" layer="95">&gt;NAME</text>
-</symbol>
 <symbol name="MBED-ENABLED-LOGO">
 <text x="0" y="2.54" size="1.778" layer="94">mbed</text>
 <text x="0" y="0" size="1.778" layer="94">Enabled</text>
@@ -4744,6 +4634,69 @@
 </device>
 </devices>
 </deviceset>
+<deviceset name="USB" prefix="CON">
+<description>&lt;b&gt;USB Connectors&lt;/b&gt;&lt;p&gt;</description>
+<gates>
+<gate name="A" symbol="USB-1" x="0" y="0"/>
+</gates>
+<devices>
+<device name="-A-H" package="USB-A-H">
+<connects>
+<connect gate="A" pin="D+" pad="D+"/>
+<connect gate="A" pin="D-" pad="D-"/>
+<connect gate="A" pin="GND" pad="GND"/>
+<connect gate="A" pin="VBUS" pad="VBUS"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="-A-S" package="USB-A-S">
+<connects>
+<connect gate="A" pin="D+" pad="D+"/>
+<connect gate="A" pin="D-" pad="D-"/>
+<connect gate="A" pin="GND" pad="GND"/>
+<connect gate="A" pin="VBUS" pad="VBUS"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="-B-H" package="USB-B-H">
+<connects>
+<connect gate="A" pin="D+" pad="D+"/>
+<connect gate="A" pin="D-" pad="D-"/>
+<connect gate="A" pin="GND" pad="GND"/>
+<connect gate="A" pin="VBUS" pad="VBUS"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="-MB-S" package="USB-MB-S">
+<connects>
+<connect gate="A" pin="D+" pad="D+"/>
+<connect gate="A" pin="D-" pad="D-"/>
+<connect gate="A" pin="GND" pad="GND"/>
+<connect gate="A" pin="VBUS" pad="VBUS"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+<device name="-A-V" package="USB-A-V">
+<connects>
+<connect gate="A" pin="D+" pad="D+"/>
+<connect gate="A" pin="D-" pad="D-"/>
+<connect gate="A" pin="GND" pad="GND"/>
+<connect gate="A" pin="VBUS" pad="VBUS"/>
+</connects>
+<technologies>
+<technology name=""/>
+</technologies>
+</device>
+</devices>
+</deviceset>
 <deviceset name="MBED_HDK">
 <gates>
 <gate name="G$1" symbol="MBED_HDK" x="0" y="0"/>
@@ -4859,64 +4812,6 @@
 </device>
 </devices>
 </deviceset>
-<deviceset name="SWD-10" prefix="CON">
-<gates>
-<gate name="G$1" symbol="SWD-10" x="-5.08" y="0"/>
-</gates>
-<devices>
-<device name="_TC" package="SWD-10-TAGCONNECT">
-<connects>
-<connect gate="G$1" pin="P$1" pad="P$1"/>
-<connect gate="G$1" pin="P$10" pad="P$10"/>
-<connect gate="G$1" pin="P$2" pad="P$2"/>
-<connect gate="G$1" pin="P$3" pad="P$3"/>
-<connect gate="G$1" pin="P$4" pad="P$4"/>
-<connect gate="G$1" pin="P$5" pad="P$5"/>
-<connect gate="G$1" pin="P$6" pad="P$6"/>
-<connect gate="G$1" pin="P$7" pad="P$7"/>
-<connect gate="G$1" pin="P$8" pad="P$8"/>
-<connect gate="G$1" pin="P$9" pad="P$9"/>
-</connects>
-<technologies>
-<technology name=""/>
-</technologies>
-</device>
-<device name="_SMD" package="SWD-10-SMD">
-<connects>
-<connect gate="G$1" pin="P$1" pad="P$1"/>
-<connect gate="G$1" pin="P$10" pad="P$10"/>
-<connect gate="G$1" pin="P$2" pad="P$2"/>
-<connect gate="G$1" pin="P$3" pad="P$3"/>
-<connect gate="G$1" pin="P$4" pad="P$4"/>
-<connect gate="G$1" pin="P$5" pad="P$5"/>
-<connect gate="G$1" pin="P$6" pad="P$6"/>
-<connect gate="G$1" pin="P$7" pad="P$7"/>
-<connect gate="G$1" pin="P$8" pad="P$8"/>
-<connect gate="G$1" pin="P$9" pad="P$9"/>
-</connects>
-<technologies>
-<technology name=""/>
-</technologies>
-</device>
-<device name="_PTH" package="SWD-10-PTH">
-<connects>
-<connect gate="G$1" pin="P$1" pad="1"/>
-<connect gate="G$1" pin="P$10" pad="10"/>
-<connect gate="G$1" pin="P$2" pad="2"/>
-<connect gate="G$1" pin="P$3" pad="3"/>
-<connect gate="G$1" pin="P$4" pad="4"/>
-<connect gate="G$1" pin="P$5" pad="5"/>
-<connect gate="G$1" pin="P$6" pad="6"/>
-<connect gate="G$1" pin="P$7" pad="7"/>
-<connect gate="G$1" pin="P$8" pad="8"/>
-<connect gate="G$1" pin="P$9" pad="9"/>
-</connects>
-<technologies>
-<technology name=""/>
-</technologies>
-</device>
-</devices>
-</deviceset>
 <deviceset name="SPST" prefix="SW">
 <gates>
 <gate name="G$1" symbol="TS" x="0" y="0"/>
@@ -4942,69 +4837,6 @@
 </device>
 </devices>
 </deviceset>
-<deviceset name="USB" prefix="CON">
-<description>&lt;b&gt;USB Connectors&lt;/b&gt;&lt;p&gt;</description>
-<gates>
-<gate name="A" symbol="USB-1" x="0" y="0"/>
-</gates>
-<devices>
-<device name="-A-H" package="USB-A-H">
-<connects>
-<connect gate="A" pin="D+" pad="D+"/>
-<connect gate="A" pin="D-" pad="D-"/>
-<connect gate="A" pin="GND" pad="GND"/>
-<connect gate="A" pin="VBUS" pad="VBUS"/>
-</connects>
-<technologies>
-<technology name=""/>
-</technologies>
-</device>
-<device name="-A-S" package="USB-A-S">
-<connects>
-<connect gate="A" pin="D+" pad="D+"/>
-<connect gate="A" pin="D-" pad="D-"/>
-<connect gate="A" pin="GND" pad="GND"/>
-<connect gate="A" pin="VBUS" pad="VBUS"/>
-</connects>
-<technologies>
-<technology name=""/>
-</technologies>
-</device>
-<device name="-B-H" package="USB-B-H">
-<connects>
-<connect gate="A" pin="D+" pad="D+"/>
-<connect gate="A" pin="D-" pad="D-"/>
-<connect gate="A" pin="GND" pad="GND"/>
-<connect gate="A" pin="VBUS" pad="VBUS"/>
-</connects>
-<technologies>
-<technology name=""/>
-</technologies>
-</device>
-<device name="-MB-S" package="USB-MB-S">
-<connects>
-<connect gate="A" pin="D+" pad="D+"/>
-<connect gate="A" pin="D-" pad="D-"/>
-<connect gate="A" pin="GND" pad="GND"/>
-<connect gate="A" pin="VBUS" pad="VBUS"/>
-</connects>
-<technologies>
-<technology name=""/>
-</technologies>
-</device>
-<device name="-A-V" package="USB-A-V">
-<connects>
-<connect gate="A" pin="D+" pad="D+"/>
-<connect gate="A" pin="D-" pad="D-"/>
-<connect gate="A" pin="GND" pad="GND"/>
-<connect gate="A" pin="VBUS" pad="VBUS"/>
-</connects>
-<technologies>
-<technology name=""/>
-</technologies>
-</device>
-</devices>
-</deviceset>
 <deviceset name="MBED-ENABLED-LOGO" prefix="SS">
 <gates>
 <gate name="G$1" symbol="MBED-ENABLED-LOGO" x="2.54" y="2.54"/>
@@ -5062,6 +4894,7 @@
 <part name="R9" library="mbed-HDK" deviceset="R" device="0603" value="10k"/>
 <part name="U$14" library="mbed-HDK" deviceset="MBED_HDK" device=""/>
 <part name="U$6" library="mbed-HDK" deviceset="+3.3V_TGT" device=""/>
+<part name="U$8" library="mbed-HDK" deviceset="+3.3V_TGT" device=""/>
 <part name="U$11" library="mbed-HDK" deviceset="+3.3V_TGT" device=""/>
 <part name="GND11" library="mbed-HDK" deviceset="GND" device=""/>
 <part name="GND13" library="mbed-HDK" deviceset="GND" device=""/>
@@ -5072,41 +4905,41 @@
 <part name="U$13" library="mbed-HDK" deviceset="+3.3V_TGT" device=""/>
 <part name="GND18" library="mbed-HDK" deviceset="GND" device=""/>
 <part name="U$12" library="mbed-HDK" deviceset="+3.3V_TGT" device=""/>
-<part name="CON1" library="mbed-HDK" deviceset="SWD-10" device="_TC"/>
-<part name="GND1" library="mbed-HDK" deviceset="GND" device=""/>
+<part name="CON2" library="mbed-HDK" deviceset="USB" device="-MB-S"/>
 <part name="SW1" library="mbed-HDK" deviceset="SPST" device=""/>
+<part name="GND1" library="mbed-HDK" deviceset="GND" device=""/>
+<part name="R1" library="mbed-HDK" deviceset="R" device="0603" value="10k"/>
+<part name="C1" library="mbed-HDK" deviceset="C" device="0603" value="100nF"/>
+<part name="U$1" library="mbed-HDK" deviceset="+3.3V_TGT" device=""/>
 <part name="GND2" library="mbed-HDK" deviceset="GND" device=""/>
-<part name="R1" library="mbed-HDK" deviceset="R" device="0603" value="10k"/>
+<part name="SW2" library="mbed-HDK" deviceset="SPST" device=""/>
+<part name="GND3" library="mbed-HDK" deviceset="GND" device=""/>
+<part name="R2" library="mbed-HDK" deviceset="R" device="0603" value="10k"/>
 <part name="U$2" library="mbed-HDK" deviceset="+3.3V_TGT" device=""/>
-<part name="C1" library="mbed-HDK" deviceset="C" device="0603" value="18pF"/>
-<part name="R2" library="mbed-HDK" deviceset="R" device="0603" value="10k"/>
-<part name="SW2" library="mbed-HDK" deviceset="SPST" device=""/>
-<part name="U$3" library="mbed-HDK" deviceset="+3.3V_TGT" device=""/>
-<part name="GND3" library="mbed-HDK" deviceset="GND" device=""/>
-<part name="CON2" library="mbed-HDK" deviceset="USB" device="-MB-S"/>
 <part name="SS1" library="mbed-HDK" deviceset="MBED-ENABLED-LOGO" device="MEDIUM"/>
 </parts>
 <sheets>
 <sheet>
 <plain>
-<text x="25.4" y="170.18" size="1.778" layer="91">One cap per VDD3.3V pin</text>
+<text x="43.18" y="170.18" size="1.778" layer="91">One cap per VDD3.3V pin</text>
 <text x="274.32" y="187.96" size="6.4516" layer="94" ratio="12" rot="R180">Target</text>
+<text x="27.94" y="2.54" size="1.778" layer="97">Target LDO powered by VBUS of Interface or Target</text>
 </plain>
 <instances>
-<instance part="GND30" gate="1" x="10.16" y="139.7"/>
-<instance part="C9" gate="G$1" x="30.48" y="157.48" smashed="yes">
-<attribute name="NAME" x="34.036" y="159.258" size="1.778" layer="95"/>
-<attribute name="VALUE" x="34.036" y="153.924" size="1.778" layer="96"/>
+<instance part="GND30" gate="1" x="27.94" y="142.24" rot="R270"/>
+<instance part="C9" gate="G$1" x="48.26" y="157.48" smashed="yes">
+<attribute name="NAME" x="51.816" y="159.258" size="1.778" layer="95"/>
+<attribute name="VALUE" x="51.816" y="153.924" size="1.778" layer="96"/>
 </instance>
 <instance part="C11" gate="G$1" x="73.66" y="157.48"/>
 <instance part="C10" gate="G$1" x="63.5" y="157.48"/>
-<instance part="C8" gate="G$1" x="15.24" y="157.48" smashed="yes">
-<attribute name="NAME" x="18.796" y="159.258" size="1.778" layer="95"/>
-<attribute name="VALUE" x="18.796" y="153.924" size="1.778" layer="96"/>
+<instance part="C8" gate="G$1" x="33.02" y="157.48" smashed="yes">
+<attribute name="NAME" x="36.576" y="159.258" size="1.778" layer="95"/>
+<attribute name="VALUE" x="36.576" y="153.924" size="1.778" layer="96"/>
 </instance>
-<instance part="C12" gate="G$1" x="15.24" y="121.92" smashed="yes" rot="R180">
-<attribute name="NAME" x="11.684" y="122.682" size="1.778" layer="95" rot="R180"/>
-<attribute name="VALUE" x="11.684" y="120.396" size="1.778" layer="96" rot="R180"/>
+<instance part="C12" gate="G$1" x="12.7" y="121.92" smashed="yes" rot="R180">
+<attribute name="NAME" x="9.144" y="122.682" size="1.778" layer="95" rot="R180"/>
+<attribute name="VALUE" x="9.144" y="120.396" size="1.778" layer="96" rot="R180"/>
 </instance>
 <instance part="IC3" gate="G$1" x="137.16" y="114.3"/>
 <instance part="GND6" gate="1" x="226.06" y="35.56" rot="MR0"/>
@@ -5117,47 +4950,47 @@
 <instance part="R10" gate="G$1" x="236.22" y="76.2" rot="MR0"/>
 <instance part="R11" gate="G$1" x="236.22" y="66.04" rot="MR0"/>
 <instance part="T2" gate="G$1" x="203.2" y="45.72"/>
-<instance part="Q1" gate="G$1" x="20.32" y="129.54"/>
-<instance part="C13" gate="G$1" x="25.4" y="121.92" smashed="yes" rot="R180">
-<attribute name="NAME" x="31.496" y="121.158" size="1.778" layer="95"/>
-<attribute name="VALUE" x="31.496" y="118.364" size="1.778" layer="96"/>
+<instance part="Q1" gate="G$1" x="17.78" y="129.54"/>
+<instance part="C13" gate="G$1" x="22.86" y="121.92" smashed="yes" rot="R180">
+<attribute name="NAME" x="26.416" y="121.158" size="1.778" layer="95"/>
+<attribute name="VALUE" x="26.416" y="118.364" size="1.778" layer="96"/>
 </instance>
-<instance part="GND10" gate="1" x="15.24" y="116.84"/>
-<instance part="GND12" gate="1" x="25.4" y="116.84"/>
-<instance part="R9" gate="G$1" x="60.96" y="99.06" rot="R90"/>
+<instance part="GND10" gate="1" x="12.7" y="116.84"/>
+<instance part="GND12" gate="1" x="22.86" y="116.84"/>
+<instance part="R9" gate="G$1" x="53.34" y="106.68" rot="R90"/>
 <instance part="U$14" gate="G$1" x="0" y="0"/>
 <instance part="U$6" gate="G$1" x="203.2" y="35.56" rot="R180"/>
-<instance part="U$11" gate="G$1" x="10.16" y="167.64"/>
-<instance part="GND11" gate="1" x="81.28" y="12.7"/>
-<instance part="GND13" gate="1" x="58.42" y="12.7"/>
-<instance part="IC4" gate="G$1" x="55.88" y="30.48" smashed="yes">
-<attribute name="NAME" x="40.64" y="22.86" size="1.778" layer="95"/>
-<attribute name="VALUE" x="40.64" y="20.32" size="1.778" layer="96"/>
+<instance part="U$8" gate="G$1" x="53.34" y="96.52" rot="R180"/>
+<instance part="U$11" gate="G$1" x="27.94" y="167.64"/>
+<instance part="GND11" gate="1" x="96.52" y="10.16"/>
+<instance part="GND13" gate="1" x="73.66" y="10.16"/>
+<instance part="IC4" gate="G$1" x="71.12" y="27.94" smashed="yes">
+<attribute name="NAME" x="55.88" y="20.32" size="1.778" layer="95"/>
+<attribute name="VALUE" x="55.88" y="17.78" size="1.778" layer="96"/>
 </instance>
-<instance part="C17" gate="G$1" x="81.28" y="20.32"/>
-<instance part="C16" gate="G$1" x="73.66" y="20.32" smashed="yes">
-<attribute name="NAME" x="64.516" y="19.558" size="1.778" layer="95"/>
-<attribute name="VALUE" x="64.516" y="16.764" size="1.778" layer="96"/>
+<instance part="C17" gate="G$1" x="96.52" y="17.78"/>
+<instance part="C16" gate="G$1" x="88.9" y="17.78" smashed="yes">
+<attribute name="NAME" x="79.756" y="17.018" size="1.778" layer="95"/>
+<attribute name="VALUE" x="79.756" y="14.224" size="1.778" layer="96"/>
 </instance>
-<instance part="GND16" gate="1" x="73.66" y="12.7"/>
-<instance part="U$13" gate="G$1" x="81.28" y="35.56"/>
+<instance part="GND16" gate="1" x="88.9" y="10.16"/>
+<instance part="U$13" gate="G$1" x="96.52" y="33.02"/>
 <instance part="GND18" gate="1" x="251.46" y="53.34" rot="MR0"/>
-<instance part="U$12" gate="G$1" x="58.42" y="35.56"/>
-<instance part="SW1" gate="G$1" x="53.34" y="99.06" rot="R90"/>
-<instance part="GND2" gate="1" x="53.34" y="81.28"/>
-<instance part="R1" gate="G$1" x="71.12" y="99.06" rot="R90"/>
-<instance part="U$2" gate="G$1" x="60.96" y="76.2" rot="R180"/>
-<instance part="C1" gate="G$1" x="22.86" y="73.66" smashed="yes" rot="R180">
-<attribute name="NAME" x="28.956" y="72.898" size="1.778" layer="95"/>
-<attribute name="VALUE" x="28.956" y="70.104" size="1.778" layer="96"/>
+<instance part="U$12" gate="G$1" x="73.66" y="33.02"/>
+<instance part="CON2" gate="A" x="256.54" y="60.96"/>
+<instance part="SW1" gate="G$1" x="22.86" y="71.12" rot="R90"/>
+<instance part="GND1" gate="1" x="22.86" y="60.96"/>
+<instance part="R1" gate="G$1" x="22.86" y="86.36" rot="R90"/>
+<instance part="C1" gate="G$1" x="35.56" y="71.12" smashed="yes" rot="R180">
+<attribute name="NAME" x="39.116" y="72.898" size="1.778" layer="95"/>
+<attribute name="VALUE" x="39.116" y="70.104" size="1.778" layer="96"/>
 </instance>
-<instance part="R2" gate="G$1" x="22.86" y="88.9" rot="R90"/>
-<instance part="SW2" gate="G$1" x="15.24" y="73.66" rot="R90"/>
-<instance part="U$3" gate="G$1" x="22.86" y="99.06"/>
-<instance part="GND3" gate="1" x="22.86" y="63.5"/>
-<instance part="CON2" gate="A" x="256.54" y="60.96"/>
-<instance part="CON1" gate="G$1" x="127" y="15.24"/>
-<instance part="GND1" gate="1" x="114.3" y="7.62"/>
+<instance part="U$1" gate="G$1" x="22.86" y="93.98"/>
+<instance part="GND2" gate="1" x="35.56" y="60.96"/>
+<instance part="SW2" gate="G$1" x="45.72" y="106.68" rot="R90"/>
+<instance part="GND3" gate="1" x="45.72" y="96.52"/>
+<instance part="R2" gate="G$1" x="60.96" y="106.68" rot="R90"/>
+<instance part="U$2" gate="G$1" x="60.96" y="91.44" rot="R180"/>
 <instance part="SS1" gate="G$1" x="261.62" y="30.48"/>
 </instances>
 <busses>
@@ -5167,20 +5000,19 @@
 <segment>
 <wire x1="86.36" y1="142.24" x2="73.66" y2="142.24" width="0.1524" layer="91"/>
 <wire x1="73.66" y1="142.24" x2="63.5" y2="142.24" width="0.1524" layer="91"/>
-<wire x1="63.5" y1="142.24" x2="30.48" y2="142.24" width="0.1524" layer="91"/>
-<wire x1="30.48" y1="142.24" x2="15.24" y2="142.24" width="0.1524" layer="91"/>
-<wire x1="15.24" y1="142.24" x2="10.16" y2="142.24" width="0.1524" layer="91"/>
-<wire x1="10.16" y1="142.24" x2="10.16" y2="139.7" width="0.1524" layer="91"/>
+<wire x1="63.5" y1="142.24" x2="48.26" y2="142.24" width="0.1524" layer="91"/>
+<wire x1="48.26" y1="142.24" x2="33.02" y2="142.24" width="0.1524" layer="91"/>
+<wire x1="33.02" y1="142.24" x2="27.94" y2="142.24" width="0.1524" layer="91"/>
 <wire x1="86.36" y1="144.78" x2="86.36" y2="142.24" width="0.1524" layer="91"/>
 <wire x1="73.66" y1="154.94" x2="73.66" y2="142.24" width="0.1524" layer="91"/>
 <wire x1="63.5" y1="154.94" x2="63.5" y2="142.24" width="0.1524" layer="91"/>
-<wire x1="30.48" y1="154.94" x2="30.48" y2="142.24" width="0.1524" layer="91"/>
-<wire x1="15.24" y1="154.94" x2="15.24" y2="142.24" width="0.1524" layer="91"/>
+<wire x1="48.26" y1="154.94" x2="48.26" y2="142.24" width="0.1524" layer="91"/>
+<wire x1="33.02" y1="154.94" x2="33.02" y2="142.24" width="0.1524" layer="91"/>
 <wire x1="86.36" y1="142.24" x2="101.6" y2="142.24" width="0.1524" layer="91"/>
 <wire x1="101.6" y1="144.78" x2="86.36" y2="144.78" width="0.1524" layer="91"/>
 <junction x="86.36" y="142.24"/>
-<junction x="15.24" y="142.24"/>
-<junction x="30.48" y="142.24"/>
+<junction x="33.02" y="142.24"/>
+<junction x="48.26" y="142.24"/>
 <junction x="63.5" y="142.24"/>
 <junction x="73.66" y="142.24"/>
 <pinref part="GND30" gate="1" pin="GND"/>
@@ -5202,29 +5034,29 @@
 <pinref part="C14" gate="G$1" pin="P$2"/>
 </segment>
 <segment>
-<wire x1="15.24" y1="119.38" x2="15.24" y2="116.84" width="0.1524" layer="91"/>
+<wire x1="12.7" y1="119.38" x2="12.7" y2="116.84" width="0.1524" layer="91"/>
 <pinref part="C12" gate="G$1" pin="P$1"/>
 <pinref part="GND10" gate="1" pin="GND"/>
 </segment>
 <segment>
-<wire x1="25.4" y1="119.38" x2="25.4" y2="116.84" width="0.1524" layer="91"/>
+<wire x1="22.86" y1="119.38" x2="22.86" y2="116.84" width="0.1524" layer="91"/>
 <pinref part="C13" gate="G$1" pin="P$1"/>
 <pinref part="GND12" gate="1" pin="GND"/>
 </segment>
 <segment>
 <pinref part="GND11" gate="1" pin="GND"/>
-<wire x1="81.28" y1="17.78" x2="81.28" y2="12.7" width="0.1524" layer="91"/>
+<wire x1="96.52" y1="15.24" x2="96.52" y2="10.16" width="0.1524" layer="91"/>
 <pinref part="C17" gate="G$1" pin="2"/>
 </segment>
 <segment>
 <pinref part="IC4" gate="G$1" pin="GND"/>
 <pinref part="GND13" gate="1" pin="GND"/>
-<wire x1="58.42" y1="22.86" x2="58.42" y2="12.7" width="0.1524" layer="91"/>
+<wire x1="73.66" y1="20.32" x2="73.66" y2="10.16" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="GND16" gate="1" pin="GND"/>
 <pinref part="C16" gate="G$1" pin="P$2"/>
-<wire x1="73.66" y1="12.7" x2="73.66" y2="17.78" width="0.1524" layer="91"/>
+<wire x1="88.9" y1="10.16" x2="88.9" y2="15.24" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <wire x1="254" y1="60.96" x2="251.46" y2="60.96" width="0.1524" layer="91"/>
@@ -5233,46 +5065,32 @@
 <pinref part="CON2" gate="A" pin="GND"/>
 </segment>
 <segment>
+<wire x1="22.86" y1="66.04" x2="22.86" y2="60.96" width="0.1524" layer="91"/>
 <pinref part="SW1" gate="G$1" pin="P"/>
-<wire x1="53.34" y1="93.98" x2="53.34" y2="81.28" width="0.1524" layer="91"/>
-<pinref part="GND2" gate="1" pin="GND"/>
+<pinref part="GND1" gate="1" pin="GND"/>
 </segment>
 <segment>
 <pinref part="C1" gate="G$1" pin="P$1"/>
-<pinref part="GND3" gate="1" pin="GND"/>
-<wire x1="22.86" y1="63.5" x2="22.86" y2="66.04" width="0.1524" layer="91"/>
-<pinref part="SW2" gate="G$1" pin="P"/>
-<wire x1="22.86" y1="66.04" x2="22.86" y2="71.12" width="0.1524" layer="91"/>
-<wire x1="15.24" y1="68.58" x2="15.24" y2="66.04" width="0.1524" layer="91"/>
-<wire x1="15.24" y1="66.04" x2="22.86" y2="66.04" width="0.1524" layer="91"/>
-<junction x="22.86" y="66.04"/>
+<pinref part="GND2" gate="1" pin="GND"/>
+<wire x1="35.56" y1="68.58" x2="35.56" y2="60.96" width="0.1524" layer="91"/>
 </segment>
 <segment>
-<pinref part="CON1" gate="G$1" pin="P$3"/>
-<wire x1="121.92" y1="25.4" x2="114.3" y2="25.4" width="0.1524" layer="91"/>
-<wire x1="114.3" y1="25.4" x2="114.3" y2="22.86" width="0.1524" layer="91"/>
-<pinref part="CON1" gate="G$1" pin="P$5"/>
-<wire x1="114.3" y1="22.86" x2="114.3" y2="17.78" width="0.1524" layer="91"/>
-<wire x1="114.3" y1="17.78" x2="114.3" y2="7.62" width="0.1524" layer="91"/>
-<wire x1="121.92" y1="22.86" x2="114.3" y2="22.86" width="0.1524" layer="91"/>
-<pinref part="CON1" gate="G$1" pin="P$9"/>
-<wire x1="121.92" y1="17.78" x2="114.3" y2="17.78" width="0.1524" layer="91"/>
-<junction x="114.3" y="22.86"/>
-<junction x="114.3" y="17.78"/>
-<pinref part="GND1" gate="1" pin="GND"/>
+<pinref part="SW2" gate="G$1" pin="P"/>
+<pinref part="GND3" gate="1" pin="GND"/>
+<wire x1="45.72" y1="101.6" x2="45.72" y2="96.52" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="TGT_SBL_ISP" class="0">
 <segment>
-<wire x1="101.6" y1="121.92" x2="60.96" y2="121.92" width="0.1524" layer="91"/>
-<wire x1="60.96" y1="121.92" x2="60.96" y2="104.14" width="0.1524" layer="91"/>
+<wire x1="101.6" y1="121.92" x2="53.34" y2="121.92" width="0.1524" layer="91"/>
+<wire x1="53.34" y1="121.92" x2="53.34" y2="111.76" width="0.1524" layer="91"/>
 <label x="78.74" y="121.92" size="1.778" layer="95"/>
 <pinref part="IC3" gate="G$1" pin="PIO0.1/CLKOUT/CT32B0M2/USB_FTOG"/>
 <pinref part="R9" gate="G$1" pin="P$2"/>
-<pinref part="SW1" gate="G$1" pin="S"/>
-<wire x1="53.34" y1="104.14" x2="53.34" y2="121.92" width="0.1524" layer="91"/>
-<wire x1="53.34" y1="121.92" x2="60.96" y2="121.92" width="0.1524" layer="91"/>
-<junction x="60.96" y="121.92"/>
+<pinref part="SW2" gate="G$1" pin="S"/>
+<wire x1="53.34" y1="121.92" x2="45.72" y2="121.92" width="0.1524" layer="91"/>
+<wire x1="45.72" y1="121.92" x2="45.72" y2="111.76" width="0.1524" layer="91"/>
+<junction x="53.34" y="121.92"/>
 </segment>
 </net>
 <net name="N$11" class="0">
@@ -5294,17 +5112,26 @@
 <label x="91.44" y="109.22" size="1.778" layer="95" rot="R180"/>
 </segment>
 </net>
+<net name="TGT_RX" class="0">
+<segment>
+<wire x1="101.6" y1="68.58" x2="93.98" y2="68.58" width="0.1524" layer="91"/>
+<label x="91.44" y="68.58" size="1.778" layer="95" rot="R180"/>
+<pinref part="IC3" gate="G$1" pin="PIO0.18/RXD/CT32B0M0"/>
+</segment>
+</net>
+<net name="TGT_TX" class="0">
+<segment>
+<wire x1="101.6" y1="66.04" x2="93.98" y2="66.04" width="0.1524" layer="91"/>
+<label x="91.44" y="66.04" size="1.778" layer="95" rot="R180"/>
+<pinref part="IC3" gate="G$1" pin="PIO0.19/TXD/CT32B0M1"/>
+</segment>
+</net>
 <net name="TGT_SWCLK" class="0">
 <segment>
 <wire x1="101.6" y1="93.98" x2="93.98" y2="93.98" width="0.1524" layer="91"/>
 <label x="91.44" y="93.98" size="1.778" layer="95" rot="R180"/>
 <pinref part="IC3" gate="G$1" pin="SWCLK/PIO0.10/SCK0/CT16B0M2"/>
 </segment>
-<segment>
-<pinref part="CON1" gate="G$1" pin="P$4"/>
-<wire x1="154.94" y1="25.4" x2="160.02" y2="25.4" width="0.1524" layer="91"/>
-<label x="162.56" y="25.4" size="1.778" layer="95"/>
-</segment>
 </net>
 <net name="TGT_SWDIO" class="0">
 <segment>
@@ -5312,19 +5139,14 @@
 <label x="91.44" y="81.28" size="1.778" layer="95" rot="R180"/>
 <pinref part="IC3" gate="G$1" pin="SWDIO/PIO0.15/AD4/CT32B1M2"/>
 </segment>
-<segment>
-<pinref part="CON1" gate="G$1" pin="P$2"/>
-<wire x1="154.94" y1="27.94" x2="160.02" y2="27.94" width="0.1524" layer="91"/>
-<label x="162.56" y="27.94" size="1.778" layer="95"/>
-</segment>
 </net>
 <net name="N$12" class="0">
 <segment>
-<wire x1="101.6" y1="137.16" x2="15.24" y2="137.16" width="0.1524" layer="91"/>
-<wire x1="15.24" y1="137.16" x2="15.24" y2="129.54" width="0.1524" layer="91"/>
-<wire x1="15.24" y1="129.54" x2="15.24" y2="124.46" width="0.1524" layer="91"/>
-<wire x1="17.78" y1="129.54" x2="15.24" y2="129.54" width="0.1524" layer="91"/>
-<junction x="15.24" y="129.54"/>
+<wire x1="101.6" y1="137.16" x2="12.7" y2="137.16" width="0.1524" layer="91"/>
+<wire x1="12.7" y1="137.16" x2="12.7" y2="129.54" width="0.1524" layer="91"/>
+<wire x1="12.7" y1="129.54" x2="12.7" y2="124.46" width="0.1524" layer="91"/>
+<wire x1="15.24" y1="129.54" x2="12.7" y2="129.54" width="0.1524" layer="91"/>
+<junction x="12.7" y="129.54"/>
 <pinref part="IC3" gate="G$1" pin="XTALIN"/>
 <pinref part="Q1" gate="G$1" pin="1"/>
 <pinref part="C12" gate="G$1" pin="P$2"/>
@@ -5332,10 +5154,10 @@
 </net>
 <net name="N$16" class="0">
 <segment>
-<wire x1="101.6" y1="129.54" x2="25.4" y2="129.54" width="0.1524" layer="91"/>
-<wire x1="25.4" y1="129.54" x2="25.4" y2="124.46" width="0.1524" layer="91"/>
-<wire x1="25.4" y1="129.54" x2="22.86" y2="129.54" width="0.1524" layer="91"/>
-<junction x="25.4" y="129.54"/>
+<wire x1="101.6" y1="129.54" x2="22.86" y2="129.54" width="0.1524" layer="91"/>
+<wire x1="22.86" y1="129.54" x2="22.86" y2="124.46" width="0.1524" layer="91"/>
+<wire x1="22.86" y1="129.54" x2="20.32" y2="129.54" width="0.1524" layer="91"/>
+<junction x="22.86" y="129.54"/>
 <pinref part="IC3" gate="G$1" pin="XTALOUT"/>
 <pinref part="Q1" gate="G$1" pin="2"/>
 <pinref part="C13" gate="G$1" pin="P$2"/>
@@ -5393,15 +5215,20 @@
 <pinref part="U$6" gate="G$1" pin="+3,3V"/>
 </segment>
 <segment>
+<wire x1="53.34" y1="101.6" x2="53.34" y2="96.52" width="0.1524" layer="91"/>
+<pinref part="R9" gate="G$1" pin="P$1"/>
+<pinref part="U$8" gate="G$1" pin="+3,3V"/>
+</segment>
+<segment>
 <wire x1="86.36" y1="165.1" x2="73.66" y2="165.1" width="0.1524" layer="91"/>
 <wire x1="73.66" y1="165.1" x2="63.5" y2="165.1" width="0.1524" layer="91"/>
-<wire x1="63.5" y1="165.1" x2="30.48" y2="165.1" width="0.1524" layer="91"/>
-<wire x1="30.48" y1="165.1" x2="15.24" y2="165.1" width="0.1524" layer="91"/>
-<wire x1="15.24" y1="165.1" x2="10.16" y2="165.1" width="0.1524" layer="91"/>
-<wire x1="10.16" y1="165.1" x2="10.16" y2="167.64" width="0.1524" layer="91"/>
+<wire x1="63.5" y1="165.1" x2="48.26" y2="165.1" width="0.1524" layer="91"/>
+<wire x1="48.26" y1="165.1" x2="33.02" y2="165.1" width="0.1524" layer="91"/>
+<wire x1="33.02" y1="165.1" x2="27.94" y2="165.1" width="0.1524" layer="91"/>
+<wire x1="27.94" y1="165.1" x2="27.94" y2="167.64" width="0.1524" layer="91"/>
 <wire x1="86.36" y1="162.56" x2="86.36" y2="165.1" width="0.1524" layer="91"/>
-<wire x1="15.24" y1="160.02" x2="15.24" y2="165.1" width="0.1524" layer="91"/>
-<wire x1="30.48" y1="160.02" x2="30.48" y2="165.1" width="0.1524" layer="91"/>
+<wire x1="33.02" y1="160.02" x2="33.02" y2="165.1" width="0.1524" layer="91"/>
+<wire x1="48.26" y1="160.02" x2="48.26" y2="165.1" width="0.1524" layer="91"/>
 <wire x1="63.5" y1="160.02" x2="63.5" y2="165.1" width="0.1524" layer="91"/>
 <wire x1="73.66" y1="160.02" x2="73.66" y2="165.1" width="0.1524" layer="91"/>
 <wire x1="86.36" y1="162.56" x2="86.36" y2="160.02" width="0.1524" layer="91"/>
@@ -5411,8 +5238,8 @@
 <wire x1="86.36" y1="162.56" x2="101.6" y2="162.56" width="0.1524" layer="91"/>
 <wire x1="101.6" y1="165.1" x2="86.36" y2="165.1" width="0.1524" layer="91"/>
 <junction x="86.36" y="165.1"/>
-<junction x="15.24" y="165.1"/>
-<junction x="30.48" y="165.1"/>
+<junction x="33.02" y="165.1"/>
+<junction x="48.26" y="165.1"/>
 <junction x="63.5" y="165.1"/>
 <junction x="73.66" y="165.1"/>
 <junction x="86.36" y="162.56"/>
@@ -5428,81 +5255,69 @@
 <pinref part="U$11" gate="G$1" pin="+3,3V"/>
 </segment>
 <segment>
-<wire x1="81.28" y1="22.86" x2="81.28" y2="30.48" width="0.1524" layer="91"/>
-<wire x1="68.58" y1="30.48" x2="73.66" y2="30.48" width="0.1524" layer="91"/>
+<wire x1="96.52" y1="20.32" x2="96.52" y2="27.94" width="0.1524" layer="91"/>
+<wire x1="83.82" y1="27.94" x2="88.9" y2="27.94" width="0.1524" layer="91"/>
 <pinref part="IC4" gate="G$1" pin="OUT"/>
 <pinref part="C17" gate="G$1" pin="1"/>
 <pinref part="C16" gate="G$1" pin="P$1"/>
-<wire x1="73.66" y1="30.48" x2="81.28" y2="30.48" width="0.1524" layer="91"/>
-<wire x1="73.66" y1="22.86" x2="73.66" y2="30.48" width="0.1524" layer="91"/>
-<junction x="73.66" y="30.48"/>
-<junction x="81.28" y="30.48"/>
+<wire x1="88.9" y1="27.94" x2="96.52" y2="27.94" width="0.1524" layer="91"/>
+<wire x1="88.9" y1="20.32" x2="88.9" y2="27.94" width="0.1524" layer="91"/>
+<junction x="88.9" y="27.94"/>
+<junction x="96.52" y="27.94"/>
 <pinref part="U$13" gate="G$1" pin="+3,3V"/>
-<wire x1="81.28" y1="30.48" x2="81.28" y2="35.56" width="0.1524" layer="91"/>
+<wire x1="96.52" y1="27.94" x2="96.52" y2="33.02" width="0.1524" layer="91"/>
 </segment>
 <segment>
 <pinref part="IC4" gate="G$1" pin="K"/>
 <pinref part="U$12" gate="G$1" pin="+3,3V"/>
 </segment>
 <segment>
-<pinref part="R1" gate="G$1" pin="P$1"/>
-<pinref part="U$2" gate="G$1" pin="+3,3V"/>
-<wire x1="71.12" y1="93.98" x2="71.12" y2="83.82" width="0.1524" layer="91"/>
-<wire x1="71.12" y1="83.82" x2="60.96" y2="83.82" width="0.1524" layer="91"/>
-<wire x1="60.96" y1="83.82" x2="60.96" y2="76.2" width="0.1524" layer="91"/>
-<wire x1="60.96" y1="93.98" x2="60.96" y2="83.82" width="0.1524" layer="91"/>
-<pinref part="R9" gate="G$1" pin="P$1"/>
-<junction x="60.96" y="83.82"/>
+<pinref part="R1" gate="G$1" pin="P$2"/>
+<pinref part="U$1" gate="G$1" pin="+3,3V"/>
+<wire x1="22.86" y1="93.98" x2="22.86" y2="91.44" width="0.1524" layer="91"/>
 </segment>
 <segment>
-<pinref part="R2" gate="G$1" pin="P$2"/>
-<pinref part="U$3" gate="G$1" pin="+3,3V"/>
-<wire x1="22.86" y1="99.06" x2="22.86" y2="93.98" width="0.1524" layer="91"/>
+<pinref part="R2" gate="G$1" pin="P$1"/>
+<pinref part="U$2" gate="G$1" pin="+3,3V"/>
+<wire x1="60.96" y1="101.6" x2="60.96" y2="91.44" width="0.1524" layer="91"/>
 </segment>
 </net>
 <net name="TGT_NRESET" class="0">
 <segment>
 <pinref part="IC3" gate="G$1" pin="PIO0.0/NRESET"/>
-<wire x1="101.6" y1="124.46" x2="66.04" y2="124.46" width="0.1524" layer="91"/>
-<label x="58.42" y="124.46" size="1.778" layer="95"/>
-</segment>
-<segment>
-<pinref part="CON1" gate="G$1" pin="P$10"/>
-<wire x1="154.94" y1="17.78" x2="160.02" y2="17.78" width="0.1524" layer="91"/>
-<label x="162.56" y="17.78" size="1.778" layer="95"/>
+<wire x1="101.6" y1="124.46" x2="35.56" y2="124.46" width="0.1524" layer="91"/>
+<wire x1="35.56" y1="124.46" x2="35.56" y2="78.74" width="0.1524" layer="91"/>
+<wire x1="35.56" y1="78.74" x2="22.86" y2="78.74" width="0.1524" layer="91"/>
+<label x="43.18" y="124.46" size="1.778" layer="95"/>
+<pinref part="SW1" gate="G$1" pin="S"/>
+<pinref part="R1" gate="G$1" pin="P$1"/>
+<wire x1="22.86" y1="76.2" x2="22.86" y2="78.74" width="0.1524" layer="91"/>
+<junction x="22.86" y="78.74"/>
+<wire x1="22.86" y1="78.74" x2="22.86" y2="81.28" width="0.1524" layer="91"/>
+<pinref part="C1" gate="G$1" pin="P$2"/>
+<wire x1="35.56" y1="78.74" x2="35.56" y2="73.66" width="0.1524" layer="91"/>
+<junction x="35.56" y="78.74"/>
 </segment>
 </net>
 <net name="VBUS_TGT" class="0">
 <segment>
-<wire x1="48.26" y1="30.48" x2="15.24" y2="30.48" width="0.1524" layer="91"/>
-<label x="12.7" y="27.94" size="1.778" layer="95"/>
+<wire x1="63.5" y1="27.94" x2="53.34" y2="27.94" width="0.1524" layer="91"/>
+<label x="40.64" y="27.94" size="1.778" layer="95"/>
 <pinref part="IC4" gate="G$1" pin="IN"/>
 </segment>
 <segment>
-<wire x1="241.3" y1="63.5" x2="254" y2="63.5" width="0.1524" layer="91"/>
-<label x="236.22" y="45.72" size="1.778" layer="95"/>
 <pinref part="CON2" gate="A" pin="VBUS"/>
-<wire x1="241.3" y1="63.5" x2="241.3" y2="50.8" width="0.1524" layer="91"/>
-</segment>
-</net>
-<net name="N$3" class="0">
-<segment>
-<pinref part="IC3" gate="G$1" pin="PIO0.3/USB_VBUS"/>
-<pinref part="R1" gate="G$1" pin="P$2"/>
-<wire x1="71.12" y1="104.14" x2="71.12" y2="116.84" width="0.1524" layer="91"/>
-<wire x1="71.12" y1="116.84" x2="101.6" y2="116.84" width="0.1524" layer="91"/>
+<wire x1="254" y1="63.5" x2="243.84" y2="63.5" width="0.1524" layer="91"/>
+<wire x1="243.84" y1="63.5" x2="243.84" y2="48.26" width="0.1524" layer="91"/>
+<label x="238.76" y="43.18" size="1.778" layer="95"/>
 </segment>
 </net>
 <net name="N$2" class="0">
 <segment>
-<pinref part="C1" gate="G$1" pin="P$2"/>
-<pinref part="R2" gate="G$1" pin="P$1"/>
-<wire x1="22.86" y1="83.82" x2="22.86" y2="81.28" width="0.1524" layer="91"/>
-<pinref part="SW2" gate="G$1" pin="S"/>
-<wire x1="22.86" y1="81.28" x2="22.86" y2="76.2" width="0.1524" layer="91"/>
-<wire x1="15.24" y1="78.74" x2="15.24" y2="81.28" width="0.1524" layer="91"/>
-<wire x1="15.24" y1="81.28" x2="22.86" y2="81.28" width="0.1524" layer="91"/>
-<junction x="22.86" y="81.28"/>
+<pinref part="IC3" gate="G$1" pin="PIO0.3/USB_VBUS"/>
+<pinref part="R2" gate="G$1" pin="P$2"/>
+<wire x1="101.6" y1="116.84" x2="60.96" y2="116.84" width="0.1524" layer="91"/>
+<wire x1="60.96" y1="116.84" x2="60.96" y2="111.76" width="0.1524" layer="91"/>
 </segment>
 </net>
 </nets>