ADC Niose test Connect four analog signals to your MBED. and then run the Windows app. The four traces are displayed on an oscilloscope like display. I have used a USB HID DEVICE link, so connections to D+, D- are required. The MBED code is otherwise quite basic, So you can modify it to your own test needs. Additionaly, there is a 16 bit count value, in my MBED code Mainly to test if MSB & LSB are correct.
Diff: HID/USBDescriptor.h
- Revision:
- 0:cbe01b678bd4
diff -r 000000000000 -r cbe01b678bd4 HID/USBDescriptor.h --- /dev/null Thu Jan 01 00:00:00 1970 +0000 +++ b/HID/USBDescriptor.h Sat Nov 19 22:54:22 2011 +0000 @@ -0,0 +1,59 @@ +/* USBDescriptor.h */ +/* Definitions and macros for constructing USB descriptors */ +/* Copyright (c) 2011 ARM Limited. All rights reserved. */ + +/* Standard descriptor types */ +#define DEVICE_DESCRIPTOR (1) +#define CONFIGURATION_DESCRIPTOR (2) +#define STRING_DESCRIPTOR (3) +#define INTERFACE_DESCRIPTOR (4) +#define ENDPOINT_DESCRIPTOR (5) + +/* Standard descriptor lengths */ +#define DEVICE_DESCRIPTOR_LENGTH (0x12) +#define CONFIGURATION_DESCRIPTOR_LENGTH (0x09) +#define INTERFACE_DESCRIPTOR_LENGTH (0x09) +#define ENDPOINT_DESCRIPTOR_LENGTH (0x07) + + +/*string offset*/ +#define STRING_OFFSET_LANGID (0) +#define STRING_OFFSET_IMANUFACTURER (1) +#define STRING_OFFSET_IPRODUCT (2) +#define STRING_OFFSET_ISERIAL (3) +#define STRING_OFFSET_ICONFIGURATION (4) +#define STRING_OFFSET_IINTERFACE (5) + +/* USB Specification Release Number */ +#define USB_VERSION_2_0 (0x0200) + +/* Least/Most significant byte of short integer */ +#define LSB(n) ((n)&0xff) +#define MSB(n) (((n)&0xff00)>>8) + +/* Convert physical endpoint number to descriptor endpoint number */ +#define PHY_TO_DESC(endpoint) (((endpoint)>>1) | (((endpoint) & 1) ? 0x80:0)) + +/* bmAttributes in configuration descriptor */ +/* C_RESERVED must always be set */ +#define C_RESERVED (1U<<7) +#define C_SELF_POWERED (1U<<6) +#define C_REMOTE_WAKEUP (1U<<5) + +/* bMaxPower in configuration descriptor */ +#define C_POWER(mA) ((mA)/2) + +/* bmAttributes in endpoint descriptor */ +#define E_CONTROL (0x00) +#define E_ISOCHRONOUS (0x01) +#define E_BULK (0x02) +#define E_INTERRUPT (0x03) + +/* For isochronous endpoints only: */ +#define E_NO_SYNCHRONIZATION (0x00) +#define E_ASYNCHRONOUS (0x04) +#define E_ADAPTIVE (0x08) +#define E_SYNCHRONOUS (0x0C) +#define E_DATA (0x00) +#define E_FEEDBACK (0x10) +#define E_IMPLICIT_FEEDBACK (0x20)