Diff: nordic-sdk/components/softdevice/s130/doc/ble_api.dox

Revision:

372:758e9a3a346a

Parent:

371:8f7d2137727a

Child:

373:b78ccae9b3d4

diff -r 8f7d2137727a -r 758e9a3a346a nordic-sdk/components/softdevice/s130/doc/ble_api.dox
--- a/nordic-sdk/components/softdevice/s130/doc/ble_api.dox	Mon Jul 06 10:13:27 2015 +0100
+++ /dev/null	Thu Jan 01 00:00:00 1970 +0000
@@ -1,2017 +0,0 @@
-/**
- * @addtogroup BLE_COMMON 
- * @{
- * @defgroup BLE_COMMON_MSC Message Sequence Charts
- * @{
- * @defgroup BLE_COMMON_IRQ_EVT_MSC Interrupt-driven Event Retrieval
- * @msc
- * hscale = "1.5";
- * APP,SD;
- * |||;
- * APP=>SD [label = "sd_softdevice_enable(clock, assertion_handler);"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * APP=>SD [label = "sd_nvic_EnableIRQ(SD_EVT_IRQn)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * APP rbox SD [label="Application runs and uses SD API"];
- * |||;
- * SD rbox SD [label="Event Available for the App"];
- * |||;
- * APP<-SD [label = "SD_EVT_IRQn", textcolor="#800080", linecolor="#800080"];
- * APP=>APP [label = "SD_EVT_IRQHandler()"];
- * APP=>SD [label = "sd_ble_evt_get(buffer);"];
- * APP<<SD [label = "{NRF_SUCCESS, event}"];
- * |||;
- * @endmsc
- *
- * @defgroup BLE_COMMON_THREAD_EVT_MSC Thread Mode Event Retrieval
- * @msc
- * hscale = "1.5";
- * APP,SD;
- * |||;
- * APP=>SD [label = "sd_softdevice_enable(clock, assertion_handler);"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * APP=>SD [label = "sd_app_evt_wait(void);"];
- * APP rbox APP [label="App Thread Mode blocked, CPU in low power mode"];
- * |||;
- * ...;
- * |||;
- * SD rbox SD [label="Event Available for the App"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * APP=>SD [label = "sd_ble_evt_get(buffer);"];
- * APP<<SD [label = "{NRF_SUCCESS, event}"];
- * APP=>SD [label = "sd_app_evt_wait(void);"];
- * APP rbox APP [label="App Thread Mode blocked, CPU in low power mode"];
- * |||;
- * ...;
- * |||;
- * SD rbox SD [label="Event Available for the App"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * APP=>SD [label = "sd_ble_evt_get(buffer);"];
- * APP<<SD [label = "{NRF_SUCCESS, event}"];
- * APP=>SD [label = "sd_app_evt_wait(void);"];
- * APP rbox APP [label="App Thread Mode blocked, CPU in low power mode"];
- * |||;
- * ...;
- * |||;
- * @endmsc
- *
- * @defgroup BLE_COMMON_APP_BUFF_MSC App Buffer Management
- * @msc
- * hscale = "1.5";
- * APP,SD,PEER;
- * |||;
- * APP=>SD [label = "sd_ble_tx_buffer_count_get();"];
- * APP<<SD [label = "{NRF_SUCCESS, N}"];
- * APP rbox APP [label="available = N"];
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * APP=>SD [label = "sd_ble_gattc_write(handle, value)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * APP rbox APP [label="available--"];
- * SD:>PEER [label = "ATT Write Command", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_EVT_TX_COMPLETE {1}"];
- * APP rbox APP [label="available += 1"];
- * |||;
- * ...;
- * |||;
- * APP=>SD [label = "sd_ble_gatts_hvx(NOTIFICATION, app_value)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * APP rbox APP [label="available--"];
- * SD:>PEER [label = "ATT Handle Value Notification", textcolor="#000080", linecolor="#000080"];
- * APP=>SD [label = "sd_ble_gatts_hvx(NOTIFICATION, app_value)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * APP rbox APP [label="available--"];
- * SD:>PEER [label = "ATT Handle Value Notification", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_EVT_TX_COMPLETE {2}"];
- * APP rbox APP [label="available += 2"];
- * |||;
- * ...;
- * |||;
- * APP rbox PEER [label="Terminate Connection"];
- * |||;
- * APP rbox APP [label="available = N"];
- * |||;
- * @endmsc
- * @}
- * @}
- */
-
-/**
- * @addtogroup BLE_GAP 
- * @{
- * @defgroup BLE_GAP_MSC Message Sequence Charts
- * @{
- * @defgroup BLE_GAP_ADV_MSC GAP Advertisement
- * @msc
- * hscale = "1.5";
- * APP,SD,SCANNERS;
- * |||;
- * APP=>SD [label = "sd_ble_gap_address_set(addr)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * APP=>SD [label = "sd_ble_gap_adv_data_set(adv, sr)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * APP=>SD [label = "sd_ble_gap_adv_start(params)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * SD->SCANNERS [label = "ADV packet", textcolor="#000080", linecolor="#000080"];
- * SD->SCANNERS [label = "ADV packet", textcolor="#000080", linecolor="#000080"];
- * SD->SCANNERS [label = "ADV packet", textcolor="#000080", linecolor="#000080"];
- * ...;
- * SD->SCANNERS [label = "ADV packet", textcolor="#000080", linecolor="#000080"];
- * |||;
- * --- [label = " Variant #1 App Stops Advertisement "];
- * APP=>SD [label = "sd_ble_gap_adv_stop()"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * --- [label = " Variant #2 Advertisement Timeout "];
- * APP<<=SD [label = "BLE_GAP_EVT_TIMEOUT"];
- * @endmsc
- *
- * @defgroup BLE_GAP_CONN_MSC GAP Peripheral Connection Establishment and Termination
- * @msc
- * hscale = "1.5";
- * APP,SD,CENTRAL;
- * |||;
- * APP rbox CENTRAL [label="Start Connectable Advertising"];
- * |||;
- * SD<:>CENTRAL [label = "Connection Establishment", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONNECTED"];
- * |||;
- * --- [label = " Variant #1 Local Disconnection "];
- * APP=>SD [label = "sd_ble_gap_disconnect(reason)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>CENTRAL [label = "Connection Termination", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_DISCONNECTED {reason}"];
- * |||;
- * --- [label = " Variant #2 Remote Disconnection "];
- * SD<:CENTRAL [label = "Connection Termination", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_DISCONNECTED {reason}"];
- * @endmsc
- *
- * @defgroup BLE_GAP_CPU_MSC GAP Connection Parameter Update
- * @msc
- * hscale = "1.5";
- * APP,SD,CENTRAL;
- * |||;
- * APP rbox CENTRAL [label="Connection Established with conn. params. CP#1"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_conn_param_update(CP#2)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>CENTRAL [label = "L2CAP CPU Request", textcolor="#000080", linecolor="#000080"];
- * |||;
- * --- [label = " Variant #1 Central Accepts "];
- * |||;
- * SD<:CENTRAL [label = "L2CAP CPU Response: Accepted", textcolor="#000080", linecolor="#000080"];
- * |||;
- * SD<:CENTRAL [label = "Connection Update Start", textcolor="#000080", linecolor="#000080"];
- * SD:>CENTRAL [label = "Connection Update Complete", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_PARAM_UPDATE {CP#2}"];
- * |||;
- * --- [label = " Variant #2 Central Rejects "];
- * |||;
- * SD<:CENTRAL [label = "L2CAP CPU Response: Rejected", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_PARAM_UPDATE {CP#1}"];
- * --- [label = " Variant #3 Central Ignores "];
- * |||;
- * ...;
- * |||;
- * SD box SD [label="Timeout"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_PARAM_UPDATE {CP#1}"];
- * @endmsc
- *
- * @defgroup BLE_GAP_RSSI_FILT_MSC GAP RSSI for connections with event filter
- * @msc
- * hscale = "1.5";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * --- [label = " Variant #1: Trigger event when a new RSSI is available"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_rssi_start(conn_handle, 0, 0)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * SD<-PEER [label = "RSSI Sample", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_RSSI_CHANGED {RSSI#1}"];
- * |||;
- * SD<-PEER [label = "RSSI Sample", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_RSSI_CHANGED {RSSI#2}"];
- * |||;
- * SD<-PEER [label = "RSSI Sample", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_RSSI_CHANGED {RSSI#3}"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_rssi_stop()"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * --- [label = " Variant #2: Only trigger event if RSSI changes by 5 dBm or more."];
- * |||;
- * APP=>SD [label = "sd_ble_gap_rssi_start(conn_handle, 0x05, 0x00)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * SD<-PEER [label = "RSSI Sample=0x00", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_RSSI_CHANGED {RSSI#1}"];
- * |||;
- * SD<-PEER [label = "RSSI Sample=0x04", textcolor="#000080", linecolor="#000080"];
- * |||;
- * SD<-PEER [label = "RSSI Sample=0x03", textcolor="#000080", linecolor="#000080"];
- * |||;
- * SD<-PEER [label = "RSSI Sample>=0x05", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_RSSI_CHANGED {RSSI#2}"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_rssi_stop()"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * --- [label = " Variant #3: Only trigger event if more than 3 RSSI samples have deviated from the last reported RSSI by 5 dBm or more."];
- * |||;
- * APP=>SD [label = "sd_ble_gap_rssi_start(conn_handle, 0x05, 0x03)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * SD<-PEER [label = "RSSI Sample=0x00", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_RSSI_CHANGED {RSSI#1}"];
- * |||;
- * SD<-PEER [label = "RSSI Sample=0x04", textcolor="#000080", linecolor="#000080"];
- * |||;
- * SD<-PEER [label = "RSSI Sample=0x0A", textcolor="#000080", linecolor="#000080"];
- * |||;
- * SD<-PEER [label = "RSSI Sample>=0x06", textcolor="#000080", linecolor="#000080"];
- * |||;
- * SD<-PEER [label = "RSSI Sample>=0x09", textcolor="#000080", linecolor="#000080"];
- * |||;
- * SD<-PEER [label = "RSSI Sample>=0x07", textcolor="#000080", linecolor="#000080"];
- * |||;
- * APP<<=SD [label = "BLE_GAP_EVT_RSSI_CHANGED {RSSI#2}"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_rssi_stop()"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * @endmsc
- *
- * @defgroup BLE_GAP_CENTRAL_RSSI_READ_MSC GAP RSSI get sample
- * @msc
- * hscale = "1.5";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_rssi_get(conn_handle, p_rssi)"];
- * APP<<SD [label = "NRF_ERROR_INVALID_STATE"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_rssi_start(conn_handle, BLE_GAP_RSSI_THRESHOLD_INVALID, 0x00)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * APP=>SD [label = "sd_ble_gap_rssi_get(conn_handle, p_rssi)"];
- * APP<<SD [label = "NRF_ERROR_NOT_FOUND"];
- * ...;
- * ...;
- * APP rbox PEER [label="Connection events"];
- * ...;
- * ...;
- * |||;
- * SD<-PEER [label = "RSSI Sample=0x03 [dBm]", textcolor="#000080", linecolor="#000080"];
- * APP=>SD [label = "sd_ble_gap_rssi_get(conn_handle, p_rssi)"];
- * APP<<SD [label = "NRF_SUCCESS, *p_rssi=0x03 [dBm]"];
- * APP=>SD [label = "sd_ble_gap_rssi_stop()"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * @endmsc
- *
- * @defgroup BLE_GAP_PERIPH_PAIRING_JW_MSC GAP Peripheral Pairing: Just Works
- * @msc
- * hscale = "2";
- * APP,SD,CENTRAL;
- * |||;
- * APP rbox CENTRAL [label="Connection Established"];
- * |||;
- * SD<:CENTRAL [label = "SMP Pairing Request", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_SEC_PARAMS_REQUEST {central_params: no_bond, no_mitm, no_io_caps}"];
- * APP=>SD [label = "sd_ble_gap_sec_params_reply(SUCCESS, periph_params: no_bond, no_mitm, no_io_caps, NULL)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>CENTRAL [label = "SMP Pairing Response", textcolor="#000080", linecolor="#000080"];
- * |||;
- * SD abox CENTRAL [label="SMP Pairing Phase 2", textbgcolor="#7f7fff"];
- * |||;
- * APP rbox CENTRAL [label = "Encrypted with STK"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_SEC_UPDATE {ENC_NO_MITM}"];
- * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {SUCCESS}"];
- * @endmsc
- *
- * @defgroup BLE_GAP_PERIPH_BONDING_JW_MSC GAP Peripheral Bonding: Just Works
- * @msc
- * hscale = "2";
- * APP,SD,CENTRAL;
- * |||;
- * APP rbox CENTRAL [label="Connection Established"];
- * |||;
- * SD<:CENTRAL [label = "SMP Pairing Request", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_SEC_PARAMS_REQUEST {central_params: bond, no_mitm, no_io_caps}"];
- * APP=>SD [label = "sd_ble_gap_sec_params_reply(SUCCESS, periph_params: bond, no_mitm, no_io_caps, p_keyset)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>CENTRAL [label = "SMP Pairing Response", textcolor="#000080", linecolor="#000080"];
- * |||;
- * SD abox CENTRAL [label="SMP Pairing Phase 2", textbgcolor="#7f7fff"];
- * |||;
- * APP rbox CENTRAL [label = "Encrypted with STK"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_SEC_UPDATE {ENC_NO_MITM}"];
- * |||;
- * SD abox CENTRAL [label="SMP Pairing Phase 3", textbgcolor="#7f7fff"];
- * |||;
- * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {SUCCESS}"];
- * APP rbox APP [label = "Keys stored in keyset"];
- * @endmsc
- *
- * @defgroup BLE_GAP_PERIPH_BONDING_PK_PERIPH_MSC GAP Peripheral Bonding: Passkey Entry, Peripheral displays
- * @msc
- * hscale = "2";
- * APP,SD,CENTRAL;
- * |||;
- * APP rbox CENTRAL [label="Connection Established"];
- * |||;
- * SD<:CENTRAL [label = "SMP Pairing Request", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_SEC_PARAMS_REQUEST {central_params: bond, mitm, keyboard}"];
- * APP=>SD [label = "sd_ble_gap_sec_params_reply(SUCCESS, periph_params: bond, mitm, display, p_keyset)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>CENTRAL [label = "SMP Pairing Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_PASSKEY_DISPLAY {passkey}"];
- * APP rbox APP [label="Passkey displayed to the user"];
- * |||;
- * SD abox CENTRAL [label="SMP Pairing Phase 2", textbgcolor="#7f7fff"];
- * |||;
- * APP rbox CENTRAL [label = "Encrypted with STK"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_SEC_UPDATE {ENC_MITM}"];
- * |||;
- * SD abox CENTRAL [label="SMP Pairing Phase 3", textbgcolor="#7f7fff"];
- * |||;
- * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {SUCCESS}"];
- * APP rbox APP [label = "Keys stored in keyset"];
- * @endmsc
- *
- * @defgroup BLE_GAP_PERIPH_BONDING_PK_CENTRAL_OOB_MSC GAP Peripheral Bonding: Passkey Entry (Central display) or OOB MSC
- * @msc
- * hscale = "2";
- * APP,SD,CENTRAL;
- * |||;
- * APP rbox CENTRAL [label="Connection Established"];
- * |||;
- * SD<:CENTRAL [label = "SMP Pairing Request", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_SEC_PARAMS_REQUEST {central_params: bond, mitm, display}"];
- * APP=>SD [label = "sd_ble_gap_sec_params_reply(SUCCESS, periph_params: bond, mitm, keyboard, p_keyset)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>CENTRAL [label = "SMP Pairing Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_AUTH_KEY_REQUEST {type}"];
- * APP rbox APP [label="User enters Passkey or data received Out Of Band"];
- * APP=>SD [label = "sd_ble_gap_auth_key_reply(passkey or OOB)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * SD abox CENTRAL [label="SMP Pairing Phase 2", textbgcolor="#7f7fff"];
- * |||;
- * APP rbox CENTRAL [label = "Encrypted with STK"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_SEC_UPDATE {ENC_MITM}"];
- * |||;
- * SD abox CENTRAL [label="SMP Pairing Phase 3", textbgcolor="#7f7fff"];
- * |||;
- * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {SUCCESS}"];
- * APP rbox APP [label = "Keys stored in keyset"];
- * @endmsc
- *
- * @defgroup BLE_GAP_PERIPH_BONDING_STATIC_PK_PERIPHERAL GAP Bonding: Passkey Entry (Peripheral uses static passkey) MSC
- * @msc
- * hscale = "2";
- * APP,SD,CENTRAL;
- * |||;
- * APP=>SD [label = "sd_ble_opt_set(opt_id = BLE_GAP_OPT_PASSKEY, p_opt->p_passkey=passkey)"];
- * APP rbox CENTRAL [label="Connection Established"];
- * |||;
- * SD<:CENTRAL [label = "SMP Pairing Request", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_SEC_PARAMS_REQUEST {central_params: bond, mitm, keyboard}"];
- * APP=>SD [label = "sd_ble_gap_sec_params_reply(SUCCESS, periph_params: bond, mitm, io_caps = display)"];
- *
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>CENTRAL [label = "SMP Pairing Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_PASSKEY_DISPLAY {passkey}"];
- * APP rbox APP [label="Passkey displayed to the user"];
- * |||;
- * SD abox CENTRAL [label="SMP Pairing Phase 2", textbgcolor="#7f7fff"];
- * |||;
- * APP rbox CENTRAL [label = "Encrypted with STK"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_SEC_UPDATE {ENC_MITM}"];
- * |||;
- * SD abox CENTRAL [label="SMP Pairing Phase 3", textbgcolor="#7f7fff"];
- * |||;
- * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {SUCCESS, periph_keys}"];
- * APP rbox APP [label = "Store Peripheral Keys"];
- * @endmsc
- *
- * @defgroup BLE_GAP_PERIPH_ENC_MSC GAP Peripheral Encryption Establishment using stored keys
- * @msc
- * hscale = "1.5";
- * APP,SD,CENTRAL;
- * |||;
- * APP rbox CENTRAL [label="Connection Established"];
- * |||;
- * SD<:CENTRAL [label = "LL Encryption Request", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_SEC_INFO_REQUEST {addr, ediv, rand}"];
- * |||;
- * --- [label = " Variant #1 App Replies with Keys "];
- * |||;
- * APP rbox APP [label = "Load Peripheral Keys"];
- * APP=>SD [label = "sd_ble_gap_sec_info_reply(ediv, rand, LTK)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>CENTRAL [label = "LL Encryption Response", textcolor="#000080", linecolor="#000080"];
- * APP rbox CENTRAL [label = "Encrypted with LTK"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_SEC_UPDATE"];
- * |||;
- * --- [label = " Variant #2 App Replies without Keys "];
- * |||;
- * APP=>SD [label = "sd_ble_gap_sec_info_reply(NULL)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>CENTRAL [label = "LL Reject Ind: Pin or Key Missing", textcolor="#000080", linecolor="#000080"];
- * APP rbox CENTRAL [label = "Link is NOT encrypted"];
- * |||;
- * --- [label = " Variant #3 App Replies with Incorrect Keys "];
- * |||;
- * APP rbox APP [label = "Load Incorrect Peripheral Keys"];
- * APP=>SD [label = "sd_ble_gap_sec_info_reply(ediv, rand, LTK)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>CENTRAL [label = "LL Encryption Response", textcolor="#000080", linecolor="#000080"];
- * SD<:CENTRAL [label = "Connection Termination", textcolor="#000080", linecolor="#000080"];
- * APP rbox CENTRAL [label = "Link Terminated"];
- * APP<<=SD [label = "BLE_GAP_EVT_DISCONNECTED {MIC Failure}"];
- * @endmsc
- *
- * @defgroup BLE_GAP_PERIPH_SEC_MSC GAP Peripheral Initiated Security Establishment
- * @msc
- * hscale = "1.5";
- * APP,SD,CENTRAL;
- * |||;
- * APP rbox CENTRAL [label="Connection Established"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_authenticate(params)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>CENTRAL [label = "SMP Security Request", textcolor="#000080", linecolor="#000080"];
- * |||;
- * --- [label = " Variant #1 Central initiates Security Establishment "];
- * |||;
- * APP rbox CENTRAL [label="Encryption or Pairing/Bonding initiated by Central"];
- * |||;
- * --- [label = " Variant #2 Central ignores "];
- * |||;
- * ...;
- * |||;
- * APP<<=SD [label = "BLE_GAP_EVT_TIMEOUT"];
- * |||;
- * @endmsc
- *
- * @defgroup BLE_GAP_PERIPH_PAIRING_KS_OUT_OF_RANGE_MSC GAP Failed Pairing: Keysize out of supported range
- * This occurs if the min key size offered by the peer is above 16, or max key size below 7.
- * @msc
- * hscale = "2";
- * APP,SD,CENTRAL;
- * |||;
- * APP rbox CENTRAL [label="Connection Established"];
- * |||;
- * SD<:CENTRAL [label = "SMP Pairing Request", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {auth_status: Invalid params, error_src: local}"];
- * SD:>CENTRAL [label = "SMP Pairing failed", textcolor="#000080", linecolor="#000080"];
- * @endmsc
- *
- * @defgroup BLE_GAP_PERIPH_PAIRING_KS_TOO_SMALL_MSC GAP Failed Pairing: Keysize too small
- * This occurs if the max key size offered by the peer is below the min key size specified by
- * the app.
- * @msc
- * hscale = "2";
- * APP,SD,CENTRAL;
- * |||;
- * APP rbox CENTRAL [label="Connection Established"];
- * |||;
- * SD<:CENTRAL [label = "SMP Pairing Request", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_SEC_PARAMS_REQUEST"];
- * APP=>SD [label = "sd_ble_gap_sec_params_reply(SUCCESS)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>CENTRAL [label = "SMP Pairing Response", textcolor="#000080", linecolor="#000080"];
- * SD<:CENTRAL [label = "SMP Pairing Confirm", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {auth_status: Enc key size, error_src: local}"];
- * SD:>CENTRAL [label = "SMP Pairing failed", textcolor="#000080", linecolor="#000080"];
- * @endmsc
- *
- * @defgroup BLE_GAP_PERIPH_PAIRING_APP_ERROR_MSC GAP Failed Pairing: Pairing aborted by the application
- * When the application detects that the pairing should not be performed, for example an
- * insufficient IO combination, it can use sd_ble_gap_sec_params_reply() to send
- * SMP Pairing failed to the peer.
- *
- * When the stack handles the response from the application it will also validate 
- * the passkey (SMP_STC_PASSKEY_ENTRY_FAILED). If any error is detected it will be
- * reported when sd_ble_gap_sec_params_reply() is called. 
- * @msc
- * hscale = "2";
- * APP,SD,CENTRAL;
- * |||;
- * APP rbox CENTRAL [label="Connection Established"];
- * |||;
- * SD<:CENTRAL [label = "SMP Pairing Request", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_SEC_PARAMS_REQUEST"];
- * SD abox APP [label="Stack looks for errors", textbgcolor="#7f7fff"];
- * APP=>SD [label = "sd_ble_gap_sec_params_reply(<code from application>)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>CENTRAL [label = "SMP Pairing failed", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {auth_status: <code from application>, error_src: local}"];
- * @endmsc
- *
- * @defgroup BLE_GAP_PERIPH_PAIRING_CONFIRM_FAIL_MSC GAP Failed Pairing: Confirm failed
- * This occurs if the random value doesn't match, usually because the user entered a wrong pin
- * or out of band data was missing.
- * @msc
- * hscale = "2";
- * APP,SD,CENTRAL;
- * |||;
- * APP rbox CENTRAL [label="Connection Established"];
- * |||;
- * SD<:CENTRAL [label = "SMP Pairing Request", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_SEC_PARAMS_REQUEST {central_params: mitm, display}"];
- * APP=>SD [label = "sd_ble_gap_sec_params_reply(SUCCESS, periph_params: mitm, keyboard)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>CENTRAL [label = "SMP Pairing Response", textcolor="#000080", linecolor="#000080"];
- * SD<:CENTRAL [label = "SMP Pairing Confirm", textcolor="#000080", linecolor="#000080"];
- * SD:>CENTRAL [label = "SMP Pairing Confirm", textcolor="#000080", linecolor="#000080"];
- * SD<:CENTRAL [label = "SMP Pairing Random", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {auth_status: Confirm value, error_src: local}"];
- * SD:>CENTRAL [label = "SMP Pairing failed", textcolor="#000080", linecolor="#000080"];
- * @endmsc
- *
- * @defgroup BLE_GAP_PERIPH_PAIRING_REMOTE_PAIRING_FAIL_MSC GAP Failed Pairing: Pairing failed from master
- * SMP Pairing Failed may be sent from the master at various times. The application should
- * prepare for this and gracefully handle the event.
- * @msc
- * hscale = "2";
- * APP,SD,CENTRAL;
- * |||;
- * APP rbox CENTRAL [label="Connection Established"];
- * |||;
- * SD<:CENTRAL [label = "SMP Pairing Request", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_SEC_PARAMS_REQUEST"];
- * APP=>SD [label = "sd_ble_gap_sec_params_reply(SUCCESS)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>CENTRAL [label = "SMP Pairing Response", textcolor="#000080", linecolor="#000080"];
- * SD<:CENTRAL [label = "SMP Pairing Failed", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {auth_status: <remote_reason>, error_src: remote}"];
- * @endmsc
- *
- * @defgroup BLE_GAP_PERIPH_PAIRING_TIMEOUT_MSC GAP Failed Pairing: Timeout
- * This occurs if the central device doesn't continue the pairing sequence within 30 seconds.
- * @msc
- * hscale = "2";
- * APP,SD,CENTRAL;
- * |||;
- * APP rbox CENTRAL [label="Connection Established"];
- * |||;
- * SD<:CENTRAL [label = "SMP Pairing Request", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_SEC_PARAMS_REQUEST"];
- * APP=>SD [label = "sd_ble_gap_sec_params_reply(SUCCESS)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>CENTRAL [label = "SMP Pairing Response", textcolor="#000080", linecolor="#000080"];
- * ---  [ label = "Wait 30 sec" ];
- * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {auth_status: Timeout, error_src: local}"];
-
- * @endmsc
- *
- * @defgroup BLE_GAP_PERIPH_SECURITY_TIMEOUT_MSC GAP Authenticate request: Timeout
- * This occurs if the central device doesn't continue the pairing sequence after
- * the security procedure timeout.
- * @msc
- * hscale = "2";
- * APP,SD,CENTRAL;
- * |||;
- * APP rbox CENTRAL [label="Connection Established"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_authenticate(..., ble_gap_sec_params_t*)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>CENTRAL [label = "Security Request", textcolor="#000080", linecolor="#000080"];
-  ---  [ label = "After req_timeout (in ble_gap_sec_params_t)" ];
- * APP<<=SD [label = "BLE_GAP_EVT_TIMEOUT {error_src: BLE_GAP_TIMEOUT_SRC_SECURITY_REQUEST}"];
- * @endmsc
- *
- *
- *
- *
- *
- * @defgroup BLE_GAP_SCAN_MSC GAP Scanning
- * @msc
- * hscale = "1.5";
- * APP,SD,ADVERTISERS;
- * |||;
- * APP=>SD [label = "sd_ble_gap_scan_start(params)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * SD<-ADVERTISERS [label = "ADV packet", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_ADV_REPORT {bdaddr, rssi, data}"];
- * SD<-ADVERTISERS [label = "ADV packet", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_ADV_REPORT {bdaddr, rssi, data}"];
- * SD<-ADVERTISERS [label = "ADV packet", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_ADV_REPORT {bdaddr, rssi, data}"];
- * ...;
- * SD<-ADVERTISERS [label = "ADV packet", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_ADV_REPORT {bdaddr, rssi, data}"];
- * |||;
- * --- [label = " Variant #1 App Stops Scanning "];
- * APP=>SD [label = "sd_ble_gap_scan_stop()"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * --- [label = " Variant #2 Scanning Timeout "];
- * |||;
- * APP<<=SD [label = "BLE_GAP_EVT_TIMEOUT {BLE_GAP_TIMEOUT_SRC_SCAN}"];
- * @endmsc
- *
- * @defgroup BLE_GAP_CENTRAL_CONN_MSC GAP Central Connection Establishment and Termination
- * @msc
- * hscale = "1.5";
- * APP,SD,PERIPHERAL;
- * |||;
- * PERIPHERAL rbox PERIPHERAL [label="Peripheral Start Connectable Advertising"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_connect(params)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PERIPHERAL [label = "Scanning", textcolor="#000080", linecolor="#000080"];
- * |||;
- * --- [label = " Variant #1 Connection Established "];
- * SD<:>PERIPHERAL [label = "Connection Establishment", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONNECTED"];
- * |||;
- * --- [label = " Variant #2 Connection Establishment Cancelled "];
- * APP=>SD [label = "sd_ble_gap_connect_cancel()"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * --- [label = " Variant #3 Connection Timeout "];
- * |||;
- * APP<<=SD [label = "BLE_GAP_EVT_TIMEOUT {BLE_GAP_TIMEOUT_SRC_CONN}"];
- * @endmsc
- *
- * @defgroup BLE_GAP_CENTRAL_CPU_MSC GAP Central Connection Parameter Update
- * @msc
- * hscale = "1.5";
- * APP,SD,PERIPHERAL;
- * |||;
- * APP rbox PERIPHERAL [label="Connection Established with conn. params. CP#1"];
- * |||;
- * --- [label = " Unsolicited procedure"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_conn_param_update(CP#2)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * SD:>PERIPHERAL [label = "Connection Update Start", textcolor="#000080", linecolor="#000080"];
- * SD<:PERIPHERAL [label = "Connection Update Complete", textcolor="#000080", linecolor="#000080"];
- * |||;
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_PARAM_UPDATE {CP#2}"];
- * |||;
- * --- [label = " Peripheral Solicited procedure"];
- * |||;
- * SD<:PERIPHERAL [label = "L2CAP CPU Request {CP#3}", textcolor="#000080", linecolor="#000080"];
- * |||;
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST {CP#3}"];
- * |||;
- * --- [label = " Variant #1 App Accepts "];
- * APP=>SD [label = "sd_ble_gap_conn_param_update(CP#3)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PERIPHERAL [label = "L2CAP CPU Response: Accepted", textcolor="#000080", linecolor="#000080"];
- * SD:>PERIPHERAL [label = "Connection Update Start", textcolor="#000080", linecolor="#000080"];
- * SD<:PERIPHERAL [label = "Connection Update Complete", textcolor="#000080", linecolor="#000080"];
- * |||;
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_PARAM_UPDATE {CP#3}"];
- * |||;
- * --- [label = " Variant #2 App Rejects "];
- * |||;
- * APP=>SD [label = "sd_ble_gap_conn_param_update(NULL)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PERIPHERAL [label = "L2CAP CPU Response: Rejected", textcolor="#000080", linecolor="#000080"];
- * |||;
- * @endmsc
- *
- * @defgroup BLE_GAP_CENTRAL_ENC_MSC GAP Central Encryption Establishment using stored keys
- * @msc
- * hscale = "1.5";
- * APP,SD,PERIPHERAL;
- * |||;
- * APP rbox PERIPHERAL [label="Connection Established"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_encrypt(ediv, rand, LTK)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * SD:>PERIPHERAL [label = "LL Encryption Request", textcolor="#000080", linecolor="#000080"];
- * |||;
- * --- [label = " Variant #1 Peripheral replies with keys "];
- * |||;
- * PERIPHERAL rbox PERIPHERAL [label = "Peripheral Loads Keys"];
- * SD<:PERIPHERAL [label = "LL Encryption Response", textcolor="#000080", linecolor="#000080"];
- * APP rbox PERIPHERAL [label = "Encrypted with LTK"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_SEC_UPDATE"];
- * |||;
- * --- [label = " Variant #2 Peripheral keys missing "];
- * |||;
- * PERIPHERAL rbox PERIPHERAL [label = "Peripheral Keys Missing"];
- * SD<:PERIPHERAL [label = "LL Reject Ind: Pin or Key Missing", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_SEC_UPDATE"];
- * APP rbox PERIPHERAL [label = "Link is NOT encrypted"];
- * |||;
- * --- [label = " Variant #3 Incorrect peripheral keys "];
- * |||;
- * PERIPHERAL rbox PERIPHERAL [label = "Peripheral Loads Incorrect Keys"];
- * SD<:PERIPHERAL [label = "LL Encryption Response", textcolor="#000080", linecolor="#000080"];
- * SD:>PERIPHERAL [label = "Connection Termination", textcolor="#000080", linecolor="#000080"];
- * APP rbox PERIPHERAL [label = "Link Terminated"];
- * APP<<=SD [label = "BLE_GAP_EVT_DISCONNECTED {Connection Timeout}"];
- * |||;
- * @endmsc
- *
- * @defgroup BLE_GAP_CENTRAL_PAIRING_JW_MSC GAP Central Pairing: Just Works
- * @msc
- * hscale = "2";
- * APP,SD,PERIPHERAL;
- * |||;
- * APP rbox PERIPHERAL [label="Connection Established"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_authenticate(no_bond, no_mitm, no_io_caps)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PERIPHERAL [label = "SMP Pairing Request {no_bond, no mitm, no_io_caps}", textcolor="#000080", linecolor="#000080"];
- * |||;
- * SD<:PERIPHERAL [label = "SMP Pairing Response {no_bond, no mitm, no_io_caps}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_SEC_PARAMS_REQUEST {periph_params: no_bond, no_mitm, no_io_caps}"];
- * |||;
- * --- [label = " Variant #1 Central Accepts Peripheral parameters "];
- * |||;
- * APP=>SD [label = "sd_ble_gap_sec_params_reply(SUCCESS, central_params: NULL, NULL)"];
- * |||;
- * SD abox PERIPHERAL [label="SMP Pairing Phase 2", textbgcolor="#7f7fff"];
- * |||;
- * APP rbox PERIPHERAL [label = "Encrypted with STK"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_SEC_UPDATE {ENC_NO_MITM}"];
- * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {SUCCESS}"];
- * |||;
- * --- [label = " Variant #2 Central Rejects Peripheral parameters "];
- * |||;
- * APP=>SD [label = "sd_ble_gap_sec_params_reply(BLE_GAP_SEC_STATUS_INVALID_PARAMS, central_params: NULL, NULL)"];
- * |||;
- * SD:>PERIPHERAL [label = "SMP Pairing Failed", textcolor="#000080", linecolor="#000080"];
- * |||;
- * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {FAILURE}"];
- * @endmsc
- *
- * @defgroup BLE_GAP_CENTRAL_BONDING_JW_MSC GAP Central Bonding: Just Works
- * @msc
- * hscale = "2";
- * APP,SD,PERIPHERAL;
- * |||;
- * APP rbox PERIPHERAL [label="Connection Established"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_authenticate(bond, no_mitm, no_io_caps)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PERIPHERAL [label = "SMP Pairing Request {bond, no mitm, no_io_caps}", textcolor="#000080", linecolor="#000080"];
- * |||;
- * SD<:PERIPHERAL [label = "SMP Pairing Response {bond, no mitm, no_io_caps}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_SEC_PARAMS_REQUEST {periph_params: bond, no_mitm, no_io_caps}"];
- * APP=>SD [label = "sd_ble_gap_sec_params_reply(SUCCESS, central_params: NULL, p_keyset)"];
- * |||;
- * SD abox PERIPHERAL [label="SMP Pairing Phase 2", textbgcolor="#7f7fff"];
- * |||;
- * APP rbox PERIPHERAL [label = "Encrypted with STK"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_SEC_UPDATE {ENC_NO_MITM}"];
- * |||;
- * SD abox PERIPHERAL [label="SMP Pairing Phase 3", textbgcolor="#7f7fff"];
- * |||;
- * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {SUCCESS}"];
- * APP rbox APP [label = "Keys stored in keyset"];
- * @endmsc
- *
- * @defgroup BLE_GAP_CENTRAL_BONDING_PK_PERIPH_MSC GAP Central Bonding: Passkey Entry, Central displays
- * @msc
- * hscale = "2";
- * APP,SD,PERIPHERAL;
- * |||;
- * APP rbox PERIPHERAL [label="Connection Established"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_authenticate(bond, mitm, display)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PERIPHERAL [label = "SMP Pairing Request {bond, mitm, display}", textcolor="#000080", linecolor="#000080"];
- * |||;
- * SD<:PERIPHERAL [label = "SMP Pairing Response {bond, mitm, keyboard}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_SEC_PARAMS_REQUEST {periph_params: bond, mitm, keyboard}"];
- * APP=>SD [label = "sd_ble_gap_sec_params_reply(SUCCESS, central_params: NULL, p_keyset)"];
- * |||;
- * APP<<=SD [label = "BLE_GAP_EVT_PASSKEY_DISPLAY {passkey}"];
- * APP rbox APP [label="Passkey displayed to the user"];
- * |||;
- * SD abox PERIPHERAL [label="SMP Pairing Phase 2", textbgcolor="#7f7fff"];
- * |||;
- * APP rbox PERIPHERAL [label = "Encrypted with STK"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_SEC_UPDATE {ENC_MITM}"];
- * |||;
- * SD abox PERIPHERAL [label="SMP Pairing Phase 3", textbgcolor="#7f7fff"];
- * |||;
- * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {SUCCESS}"];
- * APP rbox APP [label = "Keys stored in keyset"];
- * @endmsc
- *
- * @defgroup BLE_GAP_CENTRAL_BONDING_PK_PERIPHERAL_OOB_MSC GAP Central Bonding: Passkey Entry (Peripheral display) or OOB MSC
- * @msc
- * hscale = "2";
- * APP,SD,PERIPHERAL;
- * |||;
- * APP rbox PERIPHERAL [label="Connection Established"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_authenticate(bond, mitm, keyboard)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PERIPHERAL [label = "SMP Pairing Request {bond, mitm, keyboard}", textcolor="#000080", linecolor="#000080"];
- * |||;
- * SD<:PERIPHERAL [label = "SMP Pairing Response {bond, mitm, display}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_SEC_PARAMS_REQUEST {periph_params: bond, mitm, display}"];
- * APP=>SD [label = "sd_ble_gap_sec_params_reply(SUCCESS, central_params: NULL, p_keyset)"];
- * |||;
- * APP<<=SD [label = "BLE_GAP_EVT_AUTH_KEY_REQUEST {type}"];
- * APP rbox APP [label="User enters Passkey or data received Out Of Band"];
- * APP=>SD [label = "sd_ble_gap_auth_key_reply(passkey or OOB)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * SD abox PERIPHERAL [label="SMP Pairing Phase 2", textbgcolor="#7f7fff"];
- * |||;
- * APP rbox PERIPHERAL [label = "Encrypted with STK"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_SEC_UPDATE {ENC_MITM}"];
- * |||;
- * SD abox PERIPHERAL [label="SMP Pairing Phase 3", textbgcolor="#7f7fff"];
- * |||;
- * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {SUCCESS}"];
- * APP rbox APP [label = "Keys stored in keyset"];
- * @endmsc
- *
- * @defgroup BLE_GAP_CENTRAL_SEC_REQ_MSC GAP Central Security Request Reception
- * @msc
- * hscale = "1.5";
- * APP,SD,PERIPHERAL;
- * |||;
- * APP rbox PERIPHERAL [label="Connection Established"];
- * |||;
- * SD<:PERIPHERAL [label = "SMP Security Request", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_SEC_REQUEST {bond, mitm}"];
- * |||;
- * --- [label = " Variant #1 Central initiates Security Establishment "];
- * |||;
- * APP=>SD [label = "sd_ble_gap_encrypt(ediv, rand, LTK)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * APP rbox PERIPHERAL [label = "Encrypted with LTK"];
- * |||;
- * --- [label = " Variant #2 Central Triggers pairing or bonding "];
- * |||;
- * APP=>SD [label = "sd_ble_gap_authenticate(params)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * APP rbox PERIPHERAL [label = "Pairing procedure"];
- * |||;
- * --- [label = " Variant #3 Central rejects the Securiy Request "];
- * |||;
- * APP=>SD [label = "sd_ble_gap_authenticate(NULL)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * SD:>PERIPHERAL [label = "SMP Pairing Failed: Pairing Not Supported", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {auth_status: Pairing Not Supp, error_src: local}"];
- * |||;
- * @endmsc
- *
- * @defgroup BLE_GAP_INVALID_SMP_PDU_MSC GAP Unexpected Security Packet Reception
- * @msc
- * hscale = "1.5";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * APP rbox PEER [label="No pairing in progress"];
- * |||;
- * PEER rbox PEER [label="Peer misbehaving"];
- * |||;
- * SD<:PEER [label = "SMP Pairing Failed (or other unexpected SMP PDU)", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_AUTH_STATUS {PDU_INVALID}"];
- * |||;
- * @endmsc
-
- * @defgroup BLE_GAP_CENTRAL_ENC_AUTH_MUTEX GAP Central Encryption and Authentication mutual exclusion
- * @msc
- * hscale = "1.5";
- * APP,SD,PEER;
- * |||;
- * APP=>SD [label = "sd_ble_gap_encrypt(ediv, rand, LTK)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * SD:>PEER [label = "Encryption Start", textcolor="#000080", linecolor="#000080"];
- * |||;
- * APP note SD [label = " Encryption in progress, authentication disallowed"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_authenticate()"];
- * APP<<SD [label = "NRF_ERROR_INVALID_STATE"];
- * |||;
- * SD<:PEER [label = "Encryption Complete", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_SEC_UPDATE "];
- * |||;
- * APP=>SD [label = "sd_ble_gap_conn_param_update()"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * SD:>PEER [label = "Connection Update Start", textcolor="#000080", linecolor="#000080"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_encrypt(ediv, rand, LTK)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * SD rbox SD [label="Encryption queued"];
- * |||;
- * APP note SD [label = " Encryption queued, authentication disallowed"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_authenticate()"];
- * APP<<SD [label = "NRF_ERROR_INVALID_STATE"];
- * |||;
- * SD<:PEER [label = "Connection Update Complete", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_PARAM_UPDATE"];
- * |||;
- * SD:>PEER [label = "Encryption Start", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "Encryption Complete", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_SEC_UPDATE "];
- * |||;
- * APP=>SD [label = "sd_ble_gap_authenticate()"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * APP note SD [label = " Authentication in progress, encryption disallowed"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_encrypt(ediv, rand, LTK)"];
- * APP<<SD [label = "NRF_ERROR_INVALID_STATE"];
- * @endmsc
-
- * @defgroup BLE_GAP_MULTILINK_CPU_MSC GAP Central Connection Parameter Update on multiple links
- * @msc
- * hscale = "1.5";
- * APP,SD,PERIPHERALS;
- * |||;
- * APP rbox PERIPHERALS [label="Connection Established with 4 peers, all with conn. params. CP#0"];
- * |||;
- * APP note PERIPHERALS [label = " Peripheral solicited procedure on link #2"];
- * |||;
- * SD<:PERIPHERALS [label = "L2CAP CPU Request {CP#2}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST {conn_handle_2, CP#3}"];
- * |||;
- * APP note PERIPHERALS [label = " Unsolicited procedure on links #3 and #1"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_conn_param_update(conn_handle_3, CP#3)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * SD:>PERIPHERALS [label = "Connection Update Start on link #3", textcolor="#000080", linecolor="#000080"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_conn_param_update(conn_handle_1, CP#1)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * APP note PERIPHERALS [label = " Respond to solicited procedure on link #2"];
- * APP=>SD [label = "sd_ble_gap_conn_param_update(conn_handle_2, CP#2)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PERIPHERALS [label = "L2CAP CPU Response: Accepted", textcolor="#000080", linecolor="#000080"];
- * |||;
- * APP note PERIPHERALS [label = " Additional procedure on link #2 fails, since another one is pending"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_conn_param_update(conn_handle_2, CP#5)"];
- * APP<<SD [label = "NRF_ERROR_BUSY"];
- * |||;
- * APP note PERIPHERALS [label = " Note: the order of execution is not guaranteed"];
- * |||;
- * SD<:PERIPHERALS [label = "Connection Update Complete on link #3", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_PARAM_UPDATE {conn_handle_3, CP#3}"];
- * |||;
- * SD:>PERIPHERALS [label = "Connection Update Start on link #1", textcolor="#000080", linecolor="#000080"];
- * SD<:PERIPHERALS [label = "Connection Update Complete on link #1", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_PARAM_UPDATE {conn_handle_1, CP#1}"];
- * |||;
- * SD:>PERIPHERALS [label = "Connection Update Start on link #2", textcolor="#000080", linecolor="#000080"];
- * |||;
- * APP note PERIPHERALS [label = " Peripheral solicited procedure on link #4"];
- * |||;
- * SD<:PERIPHERALS [label = "L2CAP CPU Request {CP#4}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST {conn_handle_4, CP#4}"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_conn_param_update(conn_handle_4, CP#4)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PERIPHERALS [label = "L2CAP CPU Response: Accepted", textcolor="#000080", linecolor="#000080"];
- * |||;
- * SD<:PERIPHERALS [label = "Connection Update Complete on link #2", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_PARAM_UPDATE {conn_handle_2, CP#2}"];
- * |||;
- * SD:>PERIPHERALS [label = "Connection Update Start on link #4", textcolor="#000080", linecolor="#000080"];
- * SD<:PERIPHERALS [label = "Connection Update Complete on link #4", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_PARAM_UPDATE {conn_handle_4, CP#4}"];
- * |||;
- * @endmsc
-
- * @defgroup BLE_GAP_MULTILINK_CTRL_PROC_MSC GAP Central Control Procedure Serialization on multiple links
- * @msc
- * hscale = "1.5";
- * APP,SD,PERIPHERALS;
- * |||;
- * APP rbox PERIPHERALS [label="Connection Established with 4 peers, all with conn. params. CP#0"];
- * |||;
- * APP note PERIPHERALS [label = " Peripheral solicited procedure on link #2"];
- * |||;
- * SD<:PERIPHERALS [label = "L2CAP CPU Request {CP#2}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_PARAM_UPDATE_REQUEST {conn_handle_2, CP#3}"];
- * |||;
- * APP note PERIPHERALS [label = " Encryption procedure on link #3"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_encrypt(conn_handle_3, LTK#3)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * SD:>PERIPHERALS [label = "Encryption Start on link #3", textcolor="#000080", linecolor="#000080"];
- * |||;
- * APP note PERIPHERALS [label = " Connection Update procedure on link #1"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_conn_param_update(conn_handle_1, CP#1)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * APP note PERIPHERALS [label = " Respond to solicited procedure on link #2"];
- * APP=>SD [label = "sd_ble_gap_conn_param_update(conn_handle_2, CP#2)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PERIPHERALS [label = "L2CAP CPU Response: Accepted", textcolor="#000080", linecolor="#000080"];
- * |||;
- * APP note PERIPHERALS [label = " Encryption procedure on link #4"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_encrypt(conn_handle_4, LTK#4)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * APP note PERIPHERALS [label = " Note: the order of execution is not guaranteed, but encryption always has priority"];
- * |||;
- * SD<:PERIPHERALS [label = "Encryption Complete on link #3", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_SEC_UPDATE {conn_handle_3}"];
- * |||;
- * SD:>PERIPHERALS [label = "Encryption Start on link #4", textcolor="#000080", linecolor="#000080"];
- * SD<:PERIPHERALS [label = "Encryption Complete on link #4", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_SEC_UPDATE {conn_handle_4}"];
- * |||;
- * SD:>PERIPHERALS [label = "Connection Update Start on link #1", textcolor="#000080", linecolor="#000080"];
- * SD<:PERIPHERALS [label = "Connection Update Complete on link #1", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_PARAM_UPDATE {conn_handle_1, CP#1}"];
- * |||;
- * SD:>PERIPHERALS [label = "Connection Update Start on link #2", textcolor="#000080", linecolor="#000080"];
- * SD<:PERIPHERALS [label = "Connection Update Complete on link #2", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GAP_EVT_CONN_PARAM_UPDATE {conn_handle_2, CP#2}"];
- * |||;
- * @endmsc
- *
- * @defgroup BLE_GAP_WL_SHARE_MSC GAP Whitelist Sharing
- * @msc
- * hscale = "1.5";
- * APP,SD;
- * |||;
- * APP=>SD [label = "sd_ble_gap_adv_data_set(adv, sr)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * APP=>SD [label = "sd_ble_gap_adv_start(fp = CONNREQ, WL#1)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * SD rbox SD [label="Advertising with Whitelist #1"];
- * |||;
- * APP note APP [label = "Unable to change whitelist while adv in progress"];
- * APP=>SD [label = "sd_ble_gap_scan_start(selective = 1, WL#2)"];
- * APP<<SD [label = "BLE_ERROR_GAP_WHITELIST_IN_USE"];
- * |||;
- * APP note APP [label = "Scan with the current active whitelist"];
- * APP=>SD [label = "sd_ble_gap_scan_start(selective = 1, NULL)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * SD rbox SD [label="Advertising and scanning with Whitelist #1"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_adv_stop()"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * SD rbox SD [label="Scanning with Whitelist #1"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_scan_stop()"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * APP=>SD [label = "sd_ble_gap_scan_start(selective = 1, WL#2)"];
- * APP<<SD [label = "BLE_ERROR_GAP_WHITELIST_IN_USE"];
- * |||;
- * SD rbox SD [label="Scanning with Whitelist #2"];
- * |||;
- * APP note APP [label = "Connect with the current active whitelist"];
- * APP=>SD [label = "sd_ble_gap_connect(selective = 1, NULL)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * SD note SD [label = "Scanning is automatically stopped"];
- * SD rbox SD [label="Connecting with Whitelist #2"];
- * |||;
- * @endmsc
-
- * @}
- * @}
- */
-
-/**
- * @addtogroup BLE_GATTC 
- * @{
- * @defgroup BLE_GATTC_MSC Message Sequence Charts
- * @{
- * @defgroup BLE_GATTC_PRIM_SRVC_DISC_MSC GATTC Primary Service Discovery
- * @msc
- * hscale = "2";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * --- [label = " Variant #1 Discover All Services "];
- * |||;
- * APP=>SD [label = "sd_ble_gattc_primary_services_discover(handle, NULL)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Read By Group Type Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Read By Group Type Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP {SUCCESS, services}"];
- * APP=>SD [label = "sd_ble_gattc_primary_services_discover(handle + N, NULL)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Read By Group Type Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Read By Group Type Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP {SUCCESS, services}"];
- * APP=>SD [label = "sd_ble_gattc_primary_services_discover(handle + N + M, NULL)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Read By Group Type Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Error Response: Attribute Not Found", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP {ATTRIBUTE_NOT_FOUND}"];
- * |||;
- * --- [label = " Variant #2 Discover a Specific Service "];
- * |||;
- * APP=>SD [label = "sd_ble_gattc_primary_services_discover(handle, uuid)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Find By Type Value Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Find By Type Value Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP {SUCCESS, services}"];
- * APP=>SD [label = "sd_ble_gattc_primary_services_discover(handle + N, uuid)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Find By Type Value Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Find By Type Value Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP {SUCCESS, services}"];
- * APP=>SD [label = "sd_ble_gattc_primary_services_discover(handle + N + M, uuid)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Find By Type Value Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Error Response: Attribute Not Found", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_PRIM_SRVC_DISC_RSP {ATTRIBUTE_NOT_FOUND}"];
- * @endmsc
- *
- * @defgroup BLE_GATTC_REL_DISC_MSC GATTC Relationship Discovery
- * @msc
- * hscale = "2";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * APP=>SD [label = "sd_ble_gattc_relationships_discover(handle_range)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Read By Type Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Read By Type Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_REL_DISC_RSP {SUCCESS, includes}"];
- * APP=>SD [label = "sd_ble_gattc_relationships_discover(handle_range + N)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Read By Type Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Read By Type Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_REL_DISC_RSP {SUCCESS, includes}"];
- * APP=>SD [label = "sd_ble_gattc_relationships_discover(handle_range + N + M)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Read By Type Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Error Response: Attribute Not Found", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_REL_DISC_RSP {ATTRIBUTE_NOT_FOUND}"];
- * @endmsc
- *
- * @defgroup BLE_GATTC_CHAR_DISC_MSC GATTC Characteristic Discovery
- * @msc
- * hscale = "2";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * APP=>SD [label = "sd_ble_gattc_characteristics_discover(handle_range)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Read By Type Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Read By Type Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_CHAR_DISC_RSP {SUCCESS, chars}"];
- * APP=>SD [label = "sd_ble_gattc_characteristics_discover(handle_range + N)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Read By Type Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Read By Type Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_CHAR_DISC_RSP {SUCCESS, chars}"];
- * APP=>SD [label = "sd_ble_gattc_characteristics_discover(handle_range + N + M)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Read By Type Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Error Response: Attribute Not Found", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_CHAR_DISC_RSP {ATTRIBUTE_NOT_FOUND}"];
- * @endmsc
- *
- * @defgroup BLE_GATTC_DESC_DISC_MSC GATTC Descriptor Discovery
- * @msc
- * hscale = "2";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * APP=>SD [label = "sd_ble_gattc_descriptors_discover(handle_range)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Find Information Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Find Information Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_DESC_DISC_RSP {SUCCESS, descs}"];
- * APP=>SD [label = "sd_ble_gattc_descriptors_discover(handle_range + N)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Find Information Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Find Information Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_DESC_DISC_RSP {SUCCESS, descs}"];
- * APP=>SD [label = "sd_ble_gattc_descriptors_discover(handle_range + N + M)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Find Information Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Error Response: Attribute Not Found", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_DESC_DISC_RSP {ATTRIBUTE_NOT_FOUND}"];
- * @endmsc
- *
- * @defgroup BLE_GATTC_READ_UUID_MSC GATTC Read Characteristic Value by UUID
- * @msc
- * hscale = "2";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * APP=>SD [label = "sd_ble_gattc_char_value_by_uuid_read(uuid, handle_range)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Read By Type Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Read By Type Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP {SUCCESS, char_values}"];
- * APP=>SD [label = "sd_ble_gattc_char_value_by_uuid_read(uuid, handle_range + N)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Read By Type Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Read By Type Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP {SUCCESS, char_values}"];
- * APP=>SD [label = "sd_ble_gattc_char_value_by_uuid_read(uuid, handle_range + N + M)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Read By Type Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Error Response: Attribute Not Found", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_CHAR_VAL_BY_UUID_READ_RSP {ATTRIBUTE_NOT_FOUND}"];
- * @endmsc
- *
- * @defgroup BLE_GATTC_VALUE_READ_MSC GATTC Characteristic or Descriptor Value Read
- * @msc
- * hscale = "2";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * --- [label = " Variant #1 offset == 0 "];
- * |||;
- * APP=>SD [label = "sd_ble_gattc_read(handle, 0)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Read Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Read Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_READ_RSP {SUCCESS, value}"];
- * |||;
- * --- [label = " Variant #2 offset != 0 "];
- * |||;
- * APP=>SD [label = "sd_ble_gattc_read(handle, offset)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Read Blob Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Read Blob Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_READ_RSP {SUCCESS, value}"];
- * APP=>SD [label = "sd_ble_gattc_read(handle, offset + N)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Read Blob Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Read Blob Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_READ_RSP {SUCCESS, value}"];
- * APP=>SD [label = "sd_ble_gattc_read(handle, offset + N + M + 1)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Read Blob Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Error Response: Invalid Offset", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_READ_RSP {INVALID_OFFSET}"];
- * @endmsc
- *
- * @defgroup BLE_GATTC_READ_MULT_MSC GATTC Read Multiple Characteristic Values
- * @msc
- * hscale = "2";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * --- [label = " Variant #1 Successful request "];
- * |||;
- * APP=>SD [label = "sd_ble_gattc_char_values_read(handles)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Read Multiple Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Read Multiple Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_CHAR_VALS_READ_RSP {SUCCESS, char_values}"];
- * |||;
- * --- [label = " Variant #2 Failing request (invalid handle) "];
- * |||;
- * APP=>SD [label = "sd_ble_gattc_char_values_read(handles)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Read Multiple Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Error Response: Invalid Handle", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_CHAR_VALS_READ_RSP {INVALID_HANDLE, error_handle=<invalid handle>}"];
- * @endmsc
- *
- * @defgroup BLE_GATTC_VALUE_WRITE_MSC GATTC Characteristic or Descriptor Value Write
- * @msc
- * hscale = "2";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * --- [label = " Variant #1 write_op == BLE_GATT_OP_WRITE_CMD "];
- * |||;
- * APP=>SD [label = "sd_ble_gattc_write(BLE_GATT_OP_WRITE_CMD, handle, value)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Write Command", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_EVT_TX_COMPLETE"];
- * |||;
- * --- [label = " Variant #2 write_op == BLE_GATT_OP_WRITE_REQ "];
- * |||;
- * APP=>SD [label = "sd_ble_gattc_write(BLE_GATT_OP_WRITE_REQ, handle, value)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Write Request", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Write Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_WRITE_RSP {BLE_GATT_OP_WRITE_REQ, SUCCESS}"];
- * @endmsc
- * @defgroup BLE_GATTC_VALUE_LONG_WRITE_MSC GATTC Characteristic or Descriptor Value Long Write
- * @msc
- * hscale = "2";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * APP=>SD [label = "sd_ble_gattc_write(BLE_GATT_OP_PREP_WRITE_REQ, handle, offset_1, value_1)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Prepare Write Request {handle, offset_1, value_1}", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Prepare Write Response {handle, offset_1, value_1}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_WRITE_RSP {BLE_GATT_OP_PREP_WRITE_REQ, SUCCESS, value_1}"];
- * |||;
- * APP=>SD [label = "sd_ble_gattc_write(BLE_GATT_OP_PREP_WRITE_REQ, handle, offset_2, value_2)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Prepare Write Request {handle, offset_2, value_2}", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Prepare Write Response {handle, offset_2, value_2}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_WRITE_RSP {BLE_GATT_OP_PREP_WRITE_REQ, SUCCESS, value_2}"];
- * |||;
- * ...;
- * |||;
- * --- [label = " Variant #1 App executes the Long Write procedure "];
- * |||;
- * APP=>SD [label = "sd_ble_gattc_write(BLE_GATT_OP_EXEC_WRITE_REQ, PREPARED_WRITE)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Execute Write Request: flags = 0x01", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_WRITE_RSP {BLE_GATT_OP_EXEC_WRITE_REQ, SUCCESS}"];
- * |||;
- * --- [label = " Variant #2 App cancels the Long Write procedure "];
- * |||;
- * APP=>SD [label = "sd_ble_gattc_write(BLE_GATT_OP_EXEC_WRITE_REQ, PREPARED_CANCEL)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Execute Write Request: flags = 0x00", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_WRITE_RSP {BLE_GATT_OP_EXEC_WRITE_REQ, SUCCESS}"];
- * @endmsc
- * @defgroup BLE_GATTC_VALUE_RELIABLE_WRITE_MSC GATTC Characteristic or Descriptor Value Reliable Write
- * @msc
- * hscale = "2";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * APP=>SD [label = "sd_ble_gattc_write(BLE_GATT_OP_PREP_WRITE_REQ, handle_1, offset, value_1)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Prepare Write Request {handle_1, offset, value_1}", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Prepare Write Response {handle_1, offset, value_1}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_WRITE_RSP {BLE_GATT_OP_PREP_WRITE_REQ, SUCCESS, value_1}"];
- * |||;
- * APP=>SD [label = "sd_ble_gattc_write(BLE_GATT_OP_PREP_WRITE_REQ, handle_2, offset, value_2)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Prepare Write Request {handle_2, offset, value_2}", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Prepare Write Response {handle_2, offset, value_2}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_WRITE_RSP {BLE_GATT_OP_PREP_WRITE_REQ, SUCCESS, value_2}"];
- * |||;
- * ...;
- * |||;
- * --- [label = " Variant #1 App executes the Reliable Write procedure "];
- * |||;
- * APP=>SD [label = "sd_ble_gattc_write(BLE_GATT_OP_EXEC_WRITE_REQ, PREPARED_WRITE)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Execute Write Request: flags = 0x01", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_WRITE_RSP {BLE_GATT_OP_EXEC_WRITE_REQ, SUCCESS}"];
- * |||;
- * --- [label = " Variant #2 App cancels the Reliable Write procedure "];
- * |||;
- * APP=>SD [label = "sd_ble_gattc_write(BLE_GATT_OP_EXEC_WRITE_REQ, PREPARED_CANCEL)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Execute Write Request: flags = 0x00", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_WRITE_RSP {BLE_GATT_OP_EXEC_WRITE_REQ, SUCCESS}"];
- * @endmsc
- *
- * @defgroup BLE_GATTC_HVI_MSC GATTC Handle Value Indication
- * <b> GATTC Handle Value Indication MSC </b>
- * @msc
- * hscale = "2";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * SD<:PEER [label = "ATT Handle Value Indication", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_HVX {INDICATION, data}"];
- * APP=>SD [label = "sd_ble_gattc_hv_confirm(handle)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Handle Value Confirmation", textcolor="#000080", linecolor="#000080"];
- * @endmsc
- *
- * @defgroup BLE_GATTC_HVN_MSC GATTC Handle Value Notification
- * @msc
- * hscale = "2";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * SD<:PEER [label = "ATT Handle Value Notification", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTC_EVT_HVX {NOTIFICATION, data}"];
- * @endmsc
- *
- * @defgroup BLE_GATTC_TIMEOUT_MSC GATTC Timeout
- * @msc
- * hscale = "2";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * APP rbox PEER [label="Any GATTC API used"];
- * SD:>PEER [label = "ATT Packet", textcolor="#000080", linecolor="#000080"];
- * APP note PEER [label = "No Response from Peer"];
- * |||;
- * ...;
- * |||;
- * SD box SD [label="Timeout"];
- * APP<<=SD [label = "BLE_GATTC_EVT_TIMEOUT {source}"];
- * APP rbox PEER [label="No additional ATT Traffic Allowed", textbgcolour="#ff7f7f"];
- * APP=>SD [label = "Any API call"];
- * APP<<SD [label = "NRF_ERROR_BUSY"];
- * @endmsc
- * @}
- * @}
- */
-
-/**
- * @addtogroup BLE_GATTS 
- * @{
- * @defgroup BLE_GATTS_MSC Message Sequence Charts
- * @{
- * @defgroup BLE_GATTS_ATT_TABLE_POP_MSC GATTS ATT Table Population
- * @msc
- * hscale = "1.5";
- * APP,SD;
- * |||;
- * APP=>SD [label = "sd_ble_gatts_service_add(uuid#1)"];
- * APP<<SD [label = "{NRF_SUCCESS, handle_srvc#1}"];
- * APP=>SD [label = "sd_ble_gatts_characteristic_add(handle_srvc#1, char_md, value)"];
- * APP<<SD [label = "{NRF_SUCCESS, handle_char#1, ...}"];
- * APP=>SD [label = "sd_ble_gatts_descriptor_add(handle_char#1, value)"];
- * APP<<SD [label = "{NRF_SUCCESS, handle_desc#1}"];
- * APP=>SD [label = "sd_ble_gatts_descriptor_add(handle_char#1, value)"];
- * APP<<SD [label = "{NRF_SUCCESS, handle_desc#2}"];
- * APP=>SD [label = "sd_ble_gatts_characteristic_add(handle_srvc#1, char_md, value)"];
- * APP<<SD [label = "{NRF_SUCCESS, handle_char#2, ...}"];
- * APP=>SD [label = "sd_ble_gatts_descriptor_add(handle_char#2, value)"];
- * APP<<SD [label = "{NRF_SUCCESS, handle_desc#3}"];
- * APP=>SD [label = "sd_ble_gatts_service_add(uuid#2)"];
- * APP<<SD [label = "{NRF_SUCCESS, handle_srvc#2}"];
- * APP=>SD [label = "sd_ble_gatts_include_add(handle_srvc#2, handle_srvc#1)"];
- * APP<<SD [label = "{NRF_SUCCESS, handle_inc#1}"];
- * |||;
- * ...;
- * |||;
- * @endmsc
- *
- * @defgroup BLE_GATTS_READ_REQ_NO_AUTH_MSC GATTS Read Request without Authorization
- * @msc
- * hscale = "1.5";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * SD<:PEER [label = "ATT Read Request", textcolor="#000080", linecolor="#000080"];
- * SD:>PEER [label = "ATT Read Response", textcolor="#000080", linecolor="#000080"];
- * @endmsc
- *
- * @defgroup BLE_GATTS_WRITE_REQ_NO_AUTH_MSC GATTS Write Request without Authorization
- * @msc
- * hscale = "1.5";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * SD<:PEER [label = "ATT Write Request", textcolor="#000080", linecolor="#000080"];
- * SD:>PEER [label = "ATT Write Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTS_EVT_WRITE {WRITE_REQ, data}"];
- * @endmsc
- *
- * @defgroup BLE_GATTS_WRITE_CMD_NO_AUTH_MSC GATTS Write Command with or without Authorization
- * @msc
- * hscale = "1.5";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * SD<:PEER [label = "ATT Write Command", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTS_EVT_WRITE {WRITE_CMD, data}"];
- * @endmsc
- *
- * @defgroup BLE_GATTS_READ_REQ_AUTH_MSC GATTS Read Request with Authorization
- * @msc
- * hscale = "2";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * SD rbox SD [label="Value in ATT Table: current_value"];
- * SD<:PEER [label = "ATT Read Request", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {READ, current_value}"];
- * --- [label = " Variant #1 App Authorizes "];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(SUCCESS, app_value)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD rbox SD [label="Value in ATT Table: app_value"];
- * SD:>PEER [label = "ATT Read Response {app_value}", textcolor="#000080", linecolor="#000080"];
- * --- [label = " Variant #2 App Disallows "];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(READ_NOT_PERMITTED)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Error Response", textcolor="#000080", linecolor="#000080"];
- * @endmsc
- *
- * @defgroup BLE_GATTS_WRITE_REQ_AUTH_MSC GATTS Write Request with Authorization
- * @msc
- * hscale = "2";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * SD rbox SD [label="Value in ATT Table: current_value"];
- * SD<:PEER [label = "ATT Write Request {peer_data}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, peer_value}"];
- * --- [label = " Variant #1 App Authorizes "];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(SUCCESS)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD rbox SD [label="Value in ATT Table: peer_data"];
- * SD:>PEER [label = "ATT Write Response", textcolor="#000080", linecolor="#000080"];
- * --- [label = " Variant #2 App Disallows "];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE_NOT_PERMITTED)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Error Response", textcolor="#000080", linecolor="#000080"];
- * SD rbox SD [label="Value in ATT Table: current_value"];
- * @endmsc
- *
- * @defgroup BLE_GATTS_QUEUED_WRITE_BUF_NOAUTH_MSC GATTS Queued Writes: Stack handled, no attributes require authorization
- * @msc
- * hscale = "2";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * SD rbox SD [label="Values in ATT Table:\nhandle_1: current_value_1\nhandle_2: current_value_2"];
- * SD<:PEER [label = "ATT Prepare Write Request {handle_1, offset_1, peer_value_1}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_EVT_USER_MEM_REQUEST {BLE_USER_MEM_TYPE_GATTS_QUEUED_WRITES}"];
- * APP=>SD [label = "sd_ble_user_mem_reply {user_mem_block}"];
- * SD:>PEER [label = "ATT Prepare Write Response {handle_1, offset_1, peer_value_1}", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Prepare Write Request {handle_2, offset_2, peer_value_2}", textcolor="#000080", linecolor="#000080"];
- * SD:>PEER [label = "ATT Prepare Write Response {handle_2, offset_2, peer_value_2}", textcolor="#000080", linecolor="#000080"];
- * |||;
- * --- [label = " Variant #1 Attribute Values validation passed "];
- * SD<:PEER [label = "ATT Execute Write Request {WRITE}", textcolor="#000080", linecolor="#000080"];
- * SD rbox SD [label="Values in ATT Table:\nhandle_1: peer_value_1\nhandle_2: peer_value_2"];
- * APP<<=SD [label = "BLE_GATTS_EVT_WRITE {EXEC_WRITE_REQ_NOW}"];
- * APP rbox APP [label="App parses the memory it provided"];
- * SD:>PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_EVT_USER_MEM_RELEASE {user_mem_block}"];
- * |||;
- * --- [label = " Variant #2 Attribute Values validation failed "];
- * SD<:PEER [label = "ATT Execute Write Request {WRITE}", textcolor="#000080", linecolor="#000080"];
- * SD rbox SD [label="Values in ATT Table:\nhandle_1: current_value_1\nhandle_2: current_value_2"];
- * SD:>PEER [label = "ATT Error Response {Invalid Value Length / Offset}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_EVT_USER_MEM_RELEASE {user_mem_block}"];
- * |||;
- * --- [label = " Variant #3 Peer cancels operation "];
- * SD<:PEER [label = "ATT Execute Write Request {CANCEL}", textcolor="#000080", linecolor="#000080"];
- * SD rbox SD [label="Values in ATT Table:\nhandle_1: current_value_1\nhandle_2: current_value_2"];
- * SD:>PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_EVT_USER_MEM_RELEASE {user_mem_block}"];
- * |||;
- * @endmsc
- *
- * @defgroup BLE_GATTS_QUEUED_WRITE_BUF_AUTH_MSC GATTS Queued Writes: Stack handled, one or more attributes require authorization
- * @msc
- * hscale = "2";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * SD rbox SD [label="Values in ATT Table:\nhandle_1: current_value_1\nhandle_2: current_value_2"];
- * SD<:PEER [label = "ATT Prepare Write Request {handle_1, offset_1, peer_value_1}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_EVT_USER_MEM_REQUEST {BLE_USER_MEM_TYPE_GATTS_QUEUED_WRITES}"];
- * APP=>SD [label = "sd_ble_user_mem_reply {user_mem_block}"];
- * SD:>PEER [label = "ATT Prepare Write Response {handle_1, offset_1, peer_value_1}", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Prepare Write Request {handle_2, offset_2, peer_value_2}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, PREP_WRITE_REQ, handle_2, offset_2, peer_value_2}"];
- * |||;
- * --- [label = " Variant #1 App Authorizes both Prepare Write and Execute Write"];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"];
- * SD:>PEER [label = "ATT Prepare Write Response {handle_2, offset_2, peer_value_2}", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Execute Write Request {WRITE}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, EXEC_WRITE_REQ_NOW}"];
- * APP rbox APP [label="App parses the memory it provided"];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"];
- * SD rbox SD [label="Values in ATT Table:\nhandle_1: peer_value_1\nhandle_2: peer_value_2"];
- * SD:>PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_EVT_USER_MEM_RELEASE {user_mem_block}"];
- * |||;
- * --- [label = " Variant #2 App Disallows Prepare Write and Authorizes Execute Write "];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, INSUF_AUTHORIZATION)"];
- * SD:>PEER [label = "ATT Error Response {Insufficient Authorization}", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Execute Write Request {WRITE}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, EXEC_WRITE_REQ_NOW}"];
- * APP rbox APP [label="App parses the memory it provided"];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"];
- * SD rbox SD [label="Values in ATT Table:\nhandle_1: peer_value_1\nhandle_2: current_value_2"];
- * SD:>PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_EVT_USER_MEM_RELEASE {user_mem_block}"];
- * |||;
- * --- [label = " Variant #3 App Authorizes Prepare Write and Disallows Execute Write "];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"];
- * SD:>PEER [label = "ATT Prepare Write Response {handle_2, offset_2, peer_value_2}", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Execute Write Request {WRITE}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, EXEC_WRITE_REQ_NOW}"];
- * APP rbox APP [label="App parses the memory it provided"];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, APP_ERROR_CODE)"];
- * SD rbox SD [label="Values in ATT Table:\nhandle_1: current_value_1\nhandle_2: current_value_2"];
- * SD:>PEER [label = "ATT Error Response {APP_ERROR_CODE}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_EVT_USER_MEM_RELEASE {user_mem_block}"];
- * @endmsc
- *
- * @defgroup BLE_GATTS_QUEUED_WRITE_NOBUF_NOAUTH_MSC GATTS Queued Writes: App handled, no attributes require authorization
- * @msc
- * hscale = "2";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * APP rbox SD [label="Values in ATT Table:\nhandle_1: current_value_1\nhandle_2: current_value_2"];
- * SD<:PEER [label = "ATT Prepare Write Request {handle_1, offset_1, peer_value_1}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_EVT_USER_MEM_REQUEST {BLE_USER_MEM_TYPE_GATTS_QUEUED_WRITES}"];
- * APP=>SD [label = "sd_ble_user_mem_reply {NULL}"];
- * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, PREP_WRITE_REQ, handle_1, offset_1, peer_value_1}"];
- * APP rbox APP [label="App queues {handle_1, offset_1, peer_value_1}"];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"];
- * SD:>PEER [label = "ATT Prepare Write Response {handle_1, offset_1, peer_value_1}", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Prepare Write Request {handle_2, offset_2, peer_value_2}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, PREP_WRITE_REQ, handle_2, offset_2, peer_value_2}"];
- * APP rbox APP [label="App queues {handle_2, offset_2, peer_value_2}"];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"];
- * SD:>PEER [label = "ATT Prepare Write Response {handle_2, offset_2, peer_value_2}", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Execute Write Request {WRITE}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, EXEC_WRITE_REQ_NOW}"];
- * |||;
- * --- [label = " Variant #1 Attribute values in stack memory (VLOC_STACK), attribute values validation passed "];
- * APP=>SD [label = "sd_ble_gatts_value_set {handle_1, offset_1, peer_value_1}"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * APP=>SD [label = "sd_ble_gatts_value_set {handle_2, offset_2, peer_value_2}"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD rbox SD [label="Values in ATT Table:\nhandle_1: peer_value_1\nhandle_2: peer_value_2"];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"];
- * SD:>PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"];
- * |||;
- * --- [label = " Variant #2 Attribute values in user memory (VLOC_USER), attribute values validation passed "];
- * APP rbox APP [label="Application traverses its queue and executes the write operations (memcpy)"];
- * APP rbox APP [label="Values in ATT Table:\nhandle_1: peer_value_1\nhandle_2: peer_value_2"];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"];
- * SD:>PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"];
- * |||;
- * --- [label = " Variant #3 Attribute values validation failed "];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, INVALID_OFFSET)"];
- * APP rbox SD [label="Values in ATT Table:\nhandle_1: current_value_1\nhandle_2: current_value_2"];
- * SD:>PEER [label = "ATT Error Response {Invalid Offset}", textcolor="#000080", linecolor="#000080"];
- * @endmsc
- *
- * @defgroup BLE_GATTS_QUEUED_WRITE_NOBUF_AUTH_MSC GATTS Queued Writes: App handled, one or more attributes require authorization
- * @msc
- * hscale = "2";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * APP rbox APP [label="Values in ATT Table (in user memory):\nhandle_1: current_value_1\nhandle_2: current_value_2"];
- * SD<:PEER [label = "ATT Prepare Write Request {handle_1, offset_1, peer_value_1}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_EVT_USER_MEM_REQUEST {BLE_USER_MEM_TYPE_GATTS_QUEUED_WRITES}"];
- * APP=>SD [label = "sd_ble_user_mem_reply {NULL}"];
- * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, PREP_WRITE_REQ, handle_1, offset_1, peer_value_1}"];
- * APP rbox APP [label="App queues {handle_1, offset_1, peer_value_1}"];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"];
- * SD:>PEER [label = "ATT Prepare Write Response {handle_1, offset_1, peer_value_1}", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Prepare Write Request {handle_2, offset_2, peer_value_2}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, PREP_WRITE_REQ, handle_2, offset_2, peer_value_2}"];
- * |||;
- * --- [label = " Variant #1 App Authorizes both Prepare Write and Execute Write"];
- * APP rbox APP [label="App queues {handle_2, offset_2, peer_value_2}"];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"];
- * SD:>PEER [label = "ATT Prepare Write Response {handle_2, offset_2, peer_value_2}", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Execute Write Request {WRITE}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, EXEC_WRITE_REQ_NOW}"];
- * APP rbox APP [label="Application traverses its queue and executes the write operations (memcpy)"];
- * APP rbox APP [label="Values in ATT Table:\nhandle_1: peer_value_1\nhandle_2: peer_value_2"];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"];
- * SD:>PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"];
- * |||;
- * --- [label = " Variant #2 App Disallows Prepare Write and Authorizes Execute Write "];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, INSUF_AUTHORIZATION)"];
- * SD:>PEER [label = "ATT Error Response {Insufficient Authorization}", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Execute Write Request {WRITE}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, EXEC_WRITE_REQ_NOW}"];
- * APP rbox APP [label="Application traverses its queue and executes the write operations (memcpy)"];
- * APP rbox APP [label="Values in ATT Table:\nhandle_1: peer_value_1\nhandle_2: current_value_2"];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"];
- * SD:>PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"];
- * |||;
- * --- [label = " Variant #3 App Authorizes Prepare Write and Disallows Execute Write "];
- * APP rbox APP [label="App queues {handle_2, offset_2, peer_value_2}"];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"];
- * SD:>PEER [label = "ATT Prepare Write Response {handle_2, offset_2, peer_value_2}", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Execute Write Request {WRITE}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, EXEC_WRITE_REQ_NOW}"];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, APP_ERROR_CODE)"];
- * APP rbox APP [label="Values in ATT Table:\nhandle_1: current_value_1\nhandle_2: current_value_2"];
- * SD:>PEER [label = "ATT Error Response {APP_ERROR_CODE}", textcolor="#000080", linecolor="#000080"];
- * @endmsc
- *
- * @defgroup BLE_GATTS_QUEUED_WRITE_QUEUE_FULL_MSC GATTS Queued Writes: Prepare Queue Full
- * @msc
- * hscale = "2";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * SD rbox SD [label="Values in ATT Table:\nhandle_1: current_value_1\nhandle_2: current_value_2"];
- * SD<:PEER [label = "ATT Prepare Write Request {handle_1, offset_1, peer_value_1}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_EVT_USER_MEM_REQUEST {BLE_USER_MEM_TYPE_GATTS_QUEUED_WRITES}"];
- * |||;
- * --- [label = " Variant #1 Stack handled "];
- * APP=>SD [label = "sd_ble_user_mem_reply {user_mem_block}"];
- * SD:>PEER [label = "ATT Prepare Write Response {handle_1, offset_1, peer_value_1}", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Prepare Write Request {handle_2, offset_2, peer_value_2}", textcolor="#000080", linecolor="#000080"];
- * SD:>PEER [label = "ATT Error Response {Prepare Queue Full}", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Execute Write Request {WRITE}", textcolor="#000080", linecolor="#000080"];
- * SD rbox SD [label="Values in ATT Table:\nhandle_1: peer_value_1\nhandle_2: current_value_2"];
- * APP<<=SD [label = "BLE_GATTS_EVT_WRITE {EXEC_WRITE_REQ_NOW}"];
- * APP rbox APP [label="App parses the memory it provided"];
- * SD:>PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_EVT_USER_MEM_RELEASE {user_mem_block}"];
- * |||;
- * --- [label = " Variant #2 App handled "];
- * APP=>SD [label = "sd_ble_user_mem_reply {NULL}"];
- * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, PREP_WRITE_REQ, handle_1, offset_1, peer_value_1}"];
- * APP rbox APP [label="App queues {handle_1, offset_1, peer_value_1}"];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"];
- * SD:>PEER [label = "ATT Prepare Write Response {handle_1, offset_1, peer_value_1}", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Prepare Write Request {handle_2, offset_2, peer_value_2}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, PREP_WRITE_REQ, handle_2, offset_2, peer_value_2}"];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, PREPARE_QUEUE_FULL)"];
- * SD:>PEER [label = "ATT Error Response {Prepare Queue Full}", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Execute Write Request {WRITE}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTS_EVT_RW_AUTHORIZE_REQUEST {WRITE, EXEC_WRITE_REQ_NOW}"];
- * APP=>SD [label = "sd_ble_gatts_value_set {handle_1, offset_1, peer_value_1}"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * APP=>SD [label = "sd_ble_gatts_rw_authorize_reply(WRITE, SUCCESS)"];
- * SD rbox SD [label="Values in ATT Table:\nhandle_1: peer_value_1\nhandle_2: current_value_2"];
- * SD:>PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"];
- * @endmsc
- *
- * @defgroup BLE_GATTS_QUEUED_WRITE_EXECUTE_WITHOUT_PREPARE_MSC GATTS Queued Writes: Execute Write without Prepare Write
- * @msc
- * hscale = "2";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * SD rbox SD [label="Values in ATT Table:\nhandle_1: current_value_1\nhandle_2: current_value_2"];
- * |||;
- * SD rbox SD [label="No ATT Prepare Write Request has been received by SD"];
- * |||;
- * --- [label = " Variant #1 Write cancelled "];
- * SD<:PEER [label = "ATT Execute Write Request {CANCEL}", textcolor="#000080", linecolor="#000080"];
- * SD rbox SD [label="Values in ATT Table:\nhandle_1: current_value_1\nhandle_2: current_value_2"];
- * APP<<=SD [label = "BLE_GATTS_EVT_WRITE {EXEC_WRITE_REQ_CANCEL}"];
- * SD:>PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"];
- * |||;
- * --- [label = " Variant #2 Write now "];
- * SD<:PEER [label = "ATT Execute Write Request {WRITE}", textcolor="#000080", linecolor="#000080"];
- * SD rbox SD [label="Values in ATT Table:\nhandle_1: current_value_1\nhandle_2: current_value_2"];
- * APP<<=SD [label = "BLE_GATTS_EVT_WRITE {EXEC_WRITE_REQ_NOW}"];
- * SD:>PEER [label = "ATT Execute Write Response", textcolor="#000080", linecolor="#000080"];
- * @endmsc
- *
- * @defgroup BLE_GATTS_HVI_MSC GATTS Handle Value Indication
- * @msc
- * hscale = "1.5";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * APP rbox PEER [label="Indications Enabled in CCCD"];
- * |||;
- * SD rbox SD [label="Value in ATT Table: current_value"];
- * APP=>SD [label = "sd_ble_gatts_hvx(INDICATION, app_value)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD rbox SD [label="Value in ATT Table: app_value"];
- * SD:>PEER [label = "ATT Handle Value Indication {app_value}", textcolor="#000080", linecolor="#000080"];
- * --- [label = " Variant #1 Peer Confirms "];
- * SD<:PEER [label = "ATT Handle Value Confirmation", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTS_EVT_HVC"];
- * --- [label = " Variant #2 Peer Ignores "];
- * |||;
- * ...;
- * |||;
- * SD box SD [label="Timeout"];
- * APP<<=SD [label = "BLE_GATTS_EVT_TIMEOUT"];
- * @endmsc
- *
- * @defgroup BLE_GATTS_HVN_MSC GATTS Handle Value Notification
- * @msc
- * hscale = "1.5";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * APP rbox PEER [label="Notifications Enabled in CCCD"];
- * |||;
- * SD rbox SD [label="Value in ATT Table: current_value"];
- * APP=>SD [label = "sd_ble_gatts_hvx(NOTIFICATION, app_value)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD rbox SD [label="Value in ATT Table: app_value"];
- * SD:>PEER [label = "ATT Handle Value Notification {app_value}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_EVT_TX_COMPLETE"];
- * @endmsc
- *
- * @defgroup BLE_GATTS_HVX_DISABLED_MSC GATTS Handle Value Indication or Notification disabled
- * @msc
- * hscale = "1.5";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * APP rbox PEER [label="Indications and Notifications Disabled in CCCD"];
- * |||;
- * SD rbox SD [label="Value in ATT Table: current_value"];
- * APP=>SD [label = "sd_ble_gatts_hvx(INDICATION or NOTIFICATION, app_value)"];
- * APP<<SD [label = "NRF_ERROR_INVALID_STATE"];
- * SD rbox SD [label="Value in ATT Table: current_value"];
- * @endmsc
- *
- * @defgroup BLE_GATTS_HVX_SYS_ATTRS_MISSING_MSC GATTS Handle Value Indication or Notification with System Attributes Missing
- * @msc
- * hscale = "1.5";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * APP rbox PEER [label="System Attributes Uninitialized"];
- * |||;
- * SD rbox SD [label="Value in ATT Table: current_value"];
- * APP=>SD [label = "sd_ble_gatts_hvx(INDICATION or NOTIFICATION, app_value)"];
- * APP<<SD [label = "BLE_ERROR_GATTS_SYS_ATTR_MISSING"];
- * SD rbox SD [label="Value in ATT Table: current_value"];
- * APP=>SD [label = "sd_ble_gatts_sys_attr_set()"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * ...;
- * @endmsc
- *
- * @defgroup BLE_GATTS_SC_MSC GATTS Service Changed
- * @msc
- * hscale = "1.5";
- * APP,SD,PEER;
- * |||;
- * APP rbox SD [label="Entries added to the ATT Table between handles N and M"];
- * |||;
- * APP rbox PEER [label="Connection Established with a Bonded Peer"];
- * |||;
- * APP=>SD [label = "sd_ble_gatts_service_changed(N, M)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Handle Value Indication {N, M}", textcolor="#000080", linecolor="#000080"];
- * SD<:PEER [label = "ATT Handle Value Confirmation", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTS_EVT_SC_CONFIRM"];
- * |||;
- * SD rbox PEER [label="Service Discovery"];
- * @endmsc
- *
- * @defgroup BLE_GATTS_SYS_ATTRS_UNK_PEER_MSC GATTS System Attributes Handling: Unknown Peer
- * @msc
- * hscale = "1.5";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established with an Unknown Peer"];
- * |||;
- * SD<:PEER [label = "ATT Read Request {sys_attr_handle}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTS_EVT_SYS_ATTR_MISSING"];
- * APP=>SD [label = "sd_ble_gatts_sys_attr_set(NULL)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Read Response {sys_attr_value}", textcolor="#000080", linecolor="#000080"];
- * @endmsc
- *
- * @defgroup BLE_GATTS_SYS_ATTRS_BONDED_PEER_MSC GATTS System Attributes Handling: Bonded Peer
- * @msc
- * hscale = "1.5";
- * APP,SD,PEER;
- * |||;
- * APP rbox PEER [label="Connection Established with a Bonded Peer"];
- * |||;
- * APP rbox PEER [label="ATT Traffic"];
- * |||;
- * APP rbox PEER [label="Connection Terminated"];
- * APP<<=SD [label = "BLE_GAP_EVT_DISCONNECTED {reason}"];
- * |||;
- * APP=>SD [label = "sd_ble_gatts_sys_attr_get()"];
- * APP<<SD [label = "{NRF_SUCCESS, sys_attr_data}"];
- * APP rbox APP [label="Store System Attributes"];
- * |||;
- * APP rbox SD [label="Shut down IC"];
- * |||;
- * APP rbox SD [label="Power up IC"];
- * |||;
- * APP rbox PEER [label="Connection Established with the Bonded Peer"];
- * SD<:PEER [label = "ATT Read Request {sys_attr_handle}", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_GATTS_EVT_SYS_ATTR_MISSING"];
- * APP rbox APP [label="Load System Attributes"];
- * APP=>SD [label = "sd_ble_gatts_sys_attr_set(sys_attr_data)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "ATT Read Response {sys_attr_value}", textcolor="#000080", linecolor="#000080"];
- * @endmsc
- * @}
- *
- * @addtogroup BLE_GATTS_QUEUED_WRITES_USER_MEM User memory layout for Queued Writes
- * @{ 
- *  The following table shows the memory layout used by the SoftDevice to queue a Queued Write operation (Prepare Write ATT packet) in user memory:
- *
- *  <table style="border:1px solid black;border-collapse:collapse;">
- *  <caption>Queued Write</caption>
- *  <tr>
- *  <th style="border:1px solid black;padding:5px;">Parameter</th>
- *  <th style="border:1px solid black;padding:5px;">Size (octets)</th>
- *  <th style="border:1px solid black;padding:5px;">Description</th>
- *  </tr>
- *  <tr>
- *  <td style="border:1px solid black;padding:5px;">Handle</td>
- *  <td style="border:1px solid black;padding:5px;">2</td>
- *  <td style="border:1px solid black;padding:5px;">Attribute Handle</td>
- *  </tr>
- *  <tr>
- *  <td style="border:1px solid black;padding:5px;">Offset</td>
- *  <td style="border:1px solid black;padding:5px;">2</td>
- *  <td style="border:1px solid black;padding:5px;">Value Offset</td>
- *  </tr>
- *  <tr>
- *  <td style="border:1px solid black;padding:5px;">Length</td>
- *  <td style="border:1px solid black;padding:5px;">2</td>
- *  <td style="border:1px solid black;padding:5px;">Value Length</td>
- *  </tr>
- *  <tr>
- *  <td style="border:1px solid black;padding:5px;">Value</td>
- *  <td style="border:1px solid black;padding:5px;">Length</td>
- *  <td style="border:1px solid black;padding:5px;">Attribute Value</td>
- *  </tr>
- *  </table>
- *
- *  The application can parse the array of Queued Write instances at any time, but it is recommended to do so whenever an Execute Write ATT packet 
- *  has been received over the air. See the GATT Server Queued Writes MSCs for more details.
- *  The array will be terminated by an Queued Write instance with its handle set to @ref BLE_GATT_HANDLE_INVALID.
- * @}
- * @}
- */
-
-/**
- * @addtogroup BLE_L2CAP 
- * @{
- * @defgroup BLE_L2CAP_MSC Message Sequence Charts
- * @{
- * @defgroup BLE_L2CAP_API_MSC L2CAP API
- * @msc
- * hscale = "1.5";
- * APP,SD,PEER;
- * |||;
- * APP=>SD [label = "sd_ble_l2cap_cid_register(cid)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * |||;
- * APP rbox PEER [label="Connection Established"];
- * |||;
- * APP=>SD [label = "sd_ble_l2cap_tx(data)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "L2CAP packet", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_EVT_TX_COMPLETE"];
- * SD<:PEER [label = "L2CAP packet", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_L2CAP_EVT_RX"];
- * SD<:PEER [label = "L2CAP packet", textcolor="#000080", linecolor="#000080"];
- * APP<<=SD [label = "BLE_L2CAP_EVT_RX"];
- * |||;
- * APP=>SD [label = "sd_ble_l2cap_tx(data)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * SD:>PEER [label = "L2CAP packet", textcolor="#000080", linecolor="#000080"];
- * SD=>>APP [label = "BLE_EVT_TX_COMPLETE"];
- * |||;
- * APP rbox PEER [label="Terminate Connection"];
- * |||;
- * APP=>SD [label = "sd_ble_l2cap_cid_unregister(cid)"];
- * APP<<SD [label = "NRF_SUCCESS"];
- * @endmsc
- * @}
- * @}
- */
\ No newline at end of file