Diff: source/drivers/MicroBitRadio.cpp

Revision:

1:8aa5cdb4ab67

diff -r fb15f7887843 -r 8aa5cdb4ab67 source/drivers/MicroBitRadio.cpp
--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/source/drivers/MicroBitRadio.cpp	Thu Apr 07 01:33:22 2016 +0100
@@ -0,0 +1,512 @@
+/*
+The MIT License (MIT)
+
+Copyright (c) 2016 British Broadcasting Corporation.
+This software is provided by Lancaster University by arrangement with the BBC.
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the "Software"),
+to deal in the Software without restriction, including without limitation
+the rights to use, copy, modify, merge, publish, distribute, sublicense,
+and/or sell copies of the Software, and to permit persons to whom the
+Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+DEALINGS IN THE SOFTWARE.
+*/
+
+#include "MicroBitConfig.h"
+#include "MicroBitRadio.h"
+#include "MicroBitComponent.h"
+#include "EventModel.h"
+#include "MicroBitDevice.h"
+#include "ErrorNo.h"
+#include "MicroBitFiber.h"
+#include "MicroBitBLEManager.h"
+
+/**
+  * Provides a simple broadcast radio abstraction, built upon the raw nrf51822 RADIO module.
+  *
+  * The nrf51822 RADIO module supports a number of proprietary modes of operation oher than the typical BLE usage.
+  * This class uses one of these modes to enable simple, point to multipoint communication directly between micro:bits.
+  *
+  * TODO: The protocols implemented here do not currently perform any significant form of energy management,
+  * which means that they will consume far more energy than their BLE equivalent. Later versions of the protocol
+  * should look to address this through energy efficient broadcast techbiques / sleep scheduling. In particular, the GLOSSY
+  * approach to efficient rebroadcast and network synchronisation would likely provide an effective future step.
+  *
+  * TODO: Meshing should also be considered - again a GLOSSY approach may be effective here, and highly complementary to
+  * the master/slave arachitecture of BLE.
+  *
+  * TODO: This implementation may only operated whilst the BLE stack is disabled. The nrf51822 provides a timeslot API to allow
+  * BLE to cohabit with other protocols. Future work to allow this colocation would be benefical, and would also allow for the
+  * creation of wireless BLE bridges.
+  *
+  * NOTE: This API does not contain any form of encryption, authentication or authorisation. Its purpose is solely for use as a
+  * teaching aid to demonstrate how simple communications operates, and to provide a sandpit through which learning can take place.
+  * For serious applications, BLE should be considered a substantially more secure alternative.
+  */
+
+MicroBitRadio* MicroBitRadio::instance = NULL;
+
+extern "C" void RADIO_IRQHandler(void)
+{
+    // Move on to the next buffer, if possible.
+    MicroBitRadio::instance->queueRxBuf();
+    NRF_RADIO->PACKETPTR = (uint32_t) MicroBitRadio::instance->getRxBuf();
+
+    if(NRF_RADIO->EVENTS_READY)
+    {
+        NRF_RADIO->EVENTS_READY = 0;
+
+        // Start listening and wait for the END event
+        NRF_RADIO->TASKS_START = 1;
+    }
+
+    if(NRF_RADIO->EVENTS_END)
+    {
+        NRF_RADIO->EVENTS_END = 0;
+
+        if(NRF_RADIO->CRCSTATUS == 1)
+        {
+            uint8_t sample = NRF_RADIO->RSSISAMPLE;
+
+            MicroBitRadio::instance->setRSSI(sample);
+        }
+
+        // Start listening and wait for the END event
+        NRF_RADIO->TASKS_START = 1;
+    }
+}
+
+/**
+  * Constructor.
+  *
+  * Initialise the MicroBitRadio.
+  *
+  * @note This class is demand activated, as a result most resources are only
+  *       committed if send/recv or event registrations calls are made.
+  */
+MicroBitRadio::MicroBitRadio(uint16_t id) : datagram(*this), event (*this)
+{
+    this->id = id;
+    this->status = 0;
+	this->group = 0;
+	this->queueDepth = 0;
+    this->rssi = 0;
+    this->rxQueue = NULL;
+    this->rxBuf = NULL;
+
+    instance = this;
+}
+
+/**
+  * Change the output power level of the transmitter to the given value.
+  *
+  * @param power a value in the range 0..7, where 0 is the lowest power and 7 is the highest.
+  *
+  * @return MICROBIT_OK on success, or MICROBIT_INVALID_PARAMETER if the value is out of range.
+  */
+int MicroBitRadio::setTransmitPower(int power)
+{
+    if (power < 0 || power >= MICROBIT_BLE_POWER_LEVELS)
+        return MICROBIT_INVALID_PARAMETER;
+
+    NRF_RADIO->TXPOWER = (uint32_t)MICROBIT_BLE_POWER_LEVEL[power];
+
+    return MICROBIT_OK;
+}
+
+/**
+  * Change the transmission and reception band of the radio to the given channel
+  *
+  * @param band a frequency band in the range 0 - 100. Each step is 1MHz wide, based at 2400MHz.
+  *
+  * @return MICROBIT_OK on success, or MICROBIT_INVALID_PARAMETER if the value is out of range,
+  *         or MICROBIT_NOT_SUPPORTED if the BLE stack is running.
+  */
+int MicroBitRadio::setFrequencyBand(int band)
+{
+    if (ble_running())
+        return MICROBIT_NOT_SUPPORTED;
+
+    if (band < 0 || band > 100)
+        return MICROBIT_INVALID_PARAMETER;
+
+    NRF_RADIO->FREQUENCY = (uint32_t)band;
+
+    return MICROBIT_OK;
+}
+
+/**
+  * Retrieve a pointer to the currently allocated receive buffer. This is the area of memory
+  * actively being used by the radio hardware to store incoming data.
+  *
+  * @return a pointer to the current receive buffer.
+  */
+FrameBuffer* MicroBitRadio::getRxBuf()
+{
+    return rxBuf;
+}
+
+/**
+  * Attempt to queue a buffer received by the radio hardware, if sufficient space is available.
+  *
+  * @return MICROBIT_OK on success, or MICROBIT_NO_RESOURCES if a replacement receiver buffer
+  *         could not be allocated (either by policy or memory exhaustion).
+  */
+int MicroBitRadio::queueRxBuf()
+{
+    if (rxBuf == NULL)
+        return MICROBIT_INVALID_PARAMETER;
+
+    if (queueDepth >= MICROBIT_RADIO_MAXIMUM_RX_BUFFERS)
+        return MICROBIT_NO_RESOURCES;
+
+    // Store the received RSSI value in the frame
+    rxBuf->rssi = getRSSI();
+
+    // Ensure that a replacement buffer is available before queuing.
+    FrameBuffer *newRxBuf = new FrameBuffer();
+
+    if (newRxBuf == NULL)
+        return MICROBIT_NO_RESOURCES;
+
+    // We add to the tail of the queue to preserve causal ordering.
+    rxBuf->next = NULL;
+
+    if (rxQueue == NULL)
+    {
+        rxQueue = rxBuf;
+    }
+    else
+    {
+        FrameBuffer *p = rxQueue;
+        while (p->next != NULL)
+            p = p->next;
+
+        p->next = rxBuf;
+    }
+
+    // Increase our received packet count
+    queueDepth++;
+
+    // Allocate a new buffer for the receiver hardware to use. the old on will be passed on to higher layer protocols/apps.
+    rxBuf = newRxBuf;
+
+    return MICROBIT_OK;
+}
+
+/**
+  * Sets the RSSI for the most recent packet.
+  *
+  * @param rssi the new rssi value.
+  *
+  * @note should only be called from RADIO_IRQHandler...
+  */
+int MicroBitRadio::setRSSI(uint8_t rssi)
+{
+    if (!(status & MICROBIT_RADIO_STATUS_INITIALISED))
+        return MICROBIT_NOT_SUPPORTED;
+
+    this->rssi = rssi;
+
+    return MICROBIT_OK;
+}
+
+/**
+  * Retrieves the current RSSI for the most recent packet.
+  *
+  * @return the most recent RSSI value or MICROBIT_NOT_SUPPORTED if the BLE stack is running.
+  */
+int MicroBitRadio::getRSSI()
+{
+    if (!(status & MICROBIT_RADIO_STATUS_INITIALISED))
+        return MICROBIT_NOT_SUPPORTED;
+
+    return this->rssi;
+}
+
+/**
+  * Initialises the radio for use as a multipoint sender/receiver
+  *
+  * @return MICROBIT_OK on success, MICROBIT_NOT_SUPPORTED if the BLE stack is running.
+  */
+int MicroBitRadio::enable()
+{
+    // If the device is already initialised, then there's nothing to do.
+    if (status & MICROBIT_RADIO_STATUS_INITIALISED)
+        return MICROBIT_OK;
+
+    // Only attempt to enable this radio mode if BLE is disabled.
+    if (ble_running())
+        return MICROBIT_NOT_SUPPORTED;
+
+    // If this is the first time we've been enable, allocate out receive buffers.
+    if (rxBuf == NULL)
+        rxBuf = new FrameBuffer();
+
+    if (rxBuf == NULL)
+        return MICROBIT_NO_RESOURCES;
+
+    // Enable the High Frequency clock on the processor. This is a pre-requisite for
+    // the RADIO module. Without this clock, no communication is possible.
+    NRF_CLOCK->EVENTS_HFCLKSTARTED = 0;
+    NRF_CLOCK->TASKS_HFCLKSTART = 1;
+    while (NRF_CLOCK->EVENTS_HFCLKSTARTED == 0);
+
+    // Bring up the nrf51822 RADIO module in Nordic's proprietary 1MBps packet radio mode.
+    setTransmitPower(MICROBIT_RADIO_DEFAULT_TX_POWER);
+    setFrequencyBand(MICROBIT_RADIO_DEFAULT_FREQUENCY);
+
+    // Configure for 1Mbps throughput.
+    // This may sound excessive, but running a high data rates reduces the chances of collisions...
+    NRF_RADIO->MODE = RADIO_MODE_MODE_Nrf_1Mbit;
+
+    // Configure the addresses we use for this protocol. We run ANONYMOUSLY at the core.
+    // A 40 bit addresses is used. The first 32 bits match the ASCII character code for "uBit".
+    // Statistically, this provides assurance to avoid other similar 2.4GHz protocols that may be in the vicinity.
+    // We also map the assigned 8-bit GROUP id into the PREFIX field. This allows the RADIO hardware to perform
+    // address matching for us, and only generate an interrupt when a packet matching our group is received.
+    NRF_RADIO->BASE0 = MICROBIT_RADIO_BASE_ADDRESS;
+
+    // Join the default group. This will configure the remaining byte in the RADIO hardware module.
+    setGroup(MICROBIT_RADIO_DEFAULT_GROUP);
+
+    // The RADIO hardware module supports the use of multiple addresses, but as we're running anonymously, we only need one.
+    // Configure the RADIO module to use the default address (address 0) for both send and receive operations.
+    NRF_RADIO->TXADDRESS = 0;
+    NRF_RADIO->RXADDRESSES = 1;
+
+    // Packet layout configuration. The nrf51822 has a highly capable and flexible RADIO module that, in addition to transmission
+    // and reception of data, also contains a LENGTH field, two optional additional 1 byte fields (S0 and S1) and a CRC calculation.
+    // Configure the packet format for a simple 8 bit length field and no additional fields.
+    NRF_RADIO->PCNF0 = 0x00000008;
+    NRF_RADIO->PCNF1 = 0x02040000 | MICROBIT_RADIO_MAX_PACKET_SIZE;
+
+    // Most communication channels contain some form of checksum - a mathematical calculation taken based on all the data
+    // in a packet, that is also sent as part of the packet. When received, this calculation can be repeated, and the results
+    // from the sender and receiver compared. If they are different, then some corruption of the data ahas happened in transit,
+    // and we know we can't trust it. The nrf51822 RADIO uses a CRC for this - a very effective checksum calculation.
+    //
+    // Enable automatic 16bit CRC generation and checking, and configure how the CRC is calculated.
+    NRF_RADIO->CRCCNF = RADIO_CRCCNF_LEN_Two;
+    NRF_RADIO->CRCINIT = 0xFFFF;
+    NRF_RADIO->CRCPOLY = 0x11021;
+
+    // Set the start random value of the data whitening algorithm. This can be any non zero number.
+    NRF_RADIO->DATAWHITEIV = 0x18;
+
+    // Set up the RADIO module to read and write from our internal buffer.
+    NRF_RADIO->PACKETPTR = (uint32_t)rxBuf;
+
+    // Configure the hardware to issue an interrupt whenever a task is complete (e.g. send/receive).
+    NRF_RADIO->INTENSET = 0x00000008;
+    NVIC_ClearPendingIRQ(RADIO_IRQn);
+    NVIC_EnableIRQ(RADIO_IRQn);
+
+    NRF_RADIO->SHORTS |= RADIO_SHORTS_ADDRESS_RSSISTART_Msk;
+
+    // Start listening for the next packet
+    NRF_RADIO->EVENTS_READY = 0;
+    NRF_RADIO->TASKS_RXEN = 1;
+    while(NRF_RADIO->EVENTS_READY == 0);
+
+    NRF_RADIO->EVENTS_END = 0;
+    NRF_RADIO->TASKS_START = 1;
+
+    // register ourselves for a callback event, in order to empty the receive queue.
+    fiber_add_idle_component(this);
+
+    // Done. Record that our RADIO is configured.
+    status |= MICROBIT_RADIO_STATUS_INITIALISED;
+
+    return MICROBIT_OK;
+}
+
+/**
+  * Disables the radio for use as a multipoint sender/receiver.
+  *
+  * @return MICROBIT_OK on success, MICROBIT_NOT_SUPPORTED if the BLE stack is running.
+  */
+int MicroBitRadio::disable()
+{
+    // Only attempt to enable.disable the radio if the protocol is alreayd running.
+    if (ble_running())
+        return MICROBIT_NOT_SUPPORTED;
+
+    if (!(status & MICROBIT_RADIO_STATUS_INITIALISED))
+        return MICROBIT_OK;
+
+    // Disable interrupts and STOP any ongoing packet reception.
+    NVIC_DisableIRQ(RADIO_IRQn);
+
+    NRF_RADIO->EVENTS_DISABLED = 0;
+    NRF_RADIO->TASKS_DISABLE = 1;
+    while(NRF_RADIO->EVENTS_DISABLED == 0);
+
+    // deregister ourselves from the callback event used to empty the receive queue.
+    fiber_remove_idle_component(this);
+
+    return MICROBIT_OK;
+}
+
+/**
+  * Sets the radio to listen to packets sent with the given group id.
+  *
+  * @param group The group to join. A micro:bit can only listen to one group ID at any time.
+  *
+  * @return MICROBIT_OK on success, or MICROBIT_NOT_SUPPORTED if the BLE stack is running.
+  */
+int MicroBitRadio::setGroup(uint8_t group)
+{
+    if (ble_running())
+        return MICROBIT_NOT_SUPPORTED;
+
+    // Record our group id locally
+    this->group = group;
+
+    // Also append it to the address of this device, to allow the RADIO module to filter for us.
+    NRF_RADIO->PREFIX0 = (uint32_t)group;
+
+    return MICROBIT_OK;
+}
+
+/**
+  * A background, low priority callback that is triggered whenever the processor is idle.
+  * Here, we empty our queue of received packets, and pass them onto higher level protocol handlers.
+  */
+void MicroBitRadio::idleTick()
+{
+    // Walk the list of packets and process each one.
+    while(rxQueue)
+    {
+        FrameBuffer *p = rxQueue;
+
+        switch (p->protocol)
+        {
+            case MICROBIT_RADIO_PROTOCOL_DATAGRAM:
+                datagram.packetReceived();
+                break;
+
+            case MICROBIT_RADIO_PROTOCOL_EVENTBUS:
+                event.packetReceived();
+                break;
+
+            default:
+                MicroBitEvent(MICROBIT_ID_RADIO_DATA_READY, p->protocol);
+        }
+
+        // If the packet was processed, it will have been recv'd, and taken from the queue.
+        // If this was a packet for an unknown protocol, it will still be there, so simply free it.
+        if (p == rxQueue)
+        {
+            recv();
+            delete p;
+        }
+    }
+}
+
+/**
+  * Determines the number of packets ready to be processed.
+  *
+  * @return The number of packets in the receive buffer.
+  */
+int MicroBitRadio::dataReady()
+{
+    return queueDepth;
+}
+
+/**
+  * Retrieves the next packet from the receive buffer.
+  * If a data packet is available, then it will be returned immediately to
+  * the caller. This call will also dequeue the buffer.
+  *
+  * @return The buffer containing the the packet. If no data is available, NULL is returned.
+  *
+  * @note Once recv() has been called, it is the callers resposibility to
+  *       delete the buffer when appropriate.
+  */
+FrameBuffer* MicroBitRadio::recv()
+{
+    FrameBuffer *p = rxQueue;
+
+    if (p)
+    {
+        rxQueue = rxQueue->next;
+        queueDepth--;
+    }
+
+    return p;
+}
+
+/**
+  * Transmits the given buffer onto the broadcast radio.
+  * The call will wait until the transmission of the packet has completed before returning.
+  *
+  * @param data The packet contents to transmit.
+  *
+  * @return MICROBIT_OK on success, or MICROBIT_NOT_SUPPORTED if the BLE stack is running.
+  */
+int MicroBitRadio::send(FrameBuffer *buffer)
+{
+    if (ble_running())
+        return MICROBIT_NOT_SUPPORTED;
+
+    if (buffer == NULL)
+        return MICROBIT_INVALID_PARAMETER;
+
+    if (buffer->length > MICROBIT_RADIO_MAX_PACKET_SIZE + MICROBIT_RADIO_HEADER_SIZE - 1)
+        return MICROBIT_INVALID_PARAMETER;
+
+    // Firstly, disable the Radio interrupt. We want to wait until the trasmission completes.
+    NVIC_DisableIRQ(RADIO_IRQn);
+
+    // Turn off the transceiver.
+    NRF_RADIO->EVENTS_DISABLED = 0;
+    NRF_RADIO->TASKS_DISABLE = 1;
+    while(NRF_RADIO->EVENTS_DISABLED == 0);
+
+    // Configure the radio to send the buffer provided.
+    NRF_RADIO->PACKETPTR = (uint32_t) buffer;
+
+    // Turn on the transmitter, and wait for it to signal that it's ready to use.
+    NRF_RADIO->EVENTS_READY = 0;
+    NRF_RADIO->TASKS_TXEN = 1;
+    while (NRF_RADIO->EVENTS_READY == 0);
+
+    // Start transmission and wait for end of packet.
+    NRF_RADIO->TASKS_START = 1;
+    NRF_RADIO->EVENTS_END = 0;
+    while(NRF_RADIO->EVENTS_END == 0);
+
+    // Return the radio to using the default receive buffer
+    NRF_RADIO->PACKETPTR = (uint32_t) rxBuf;
+
+    // Turn off the transmitter.
+    NRF_RADIO->EVENTS_DISABLED = 0;
+    NRF_RADIO->TASKS_DISABLE = 1;
+    while(NRF_RADIO->EVENTS_DISABLED == 0);
+
+    // Start listening for the next packet
+    NRF_RADIO->EVENTS_READY = 0;
+    NRF_RADIO->TASKS_RXEN = 1;
+    while(NRF_RADIO->EVENTS_READY == 0);
+
+    NRF_RADIO->EVENTS_END = 0;
+    NRF_RADIO->TASKS_START = 1;
+
+    // Re-enable the Radio interrupt.
+    NVIC_ClearPendingIRQ(RADIO_IRQn);
+    NVIC_EnableIRQ(RADIO_IRQn);
+
+    return MICROBIT_OK;
+}