Diff: inc/core/MicroBitConfig.h

Revision:

1:8aa5cdb4ab67

--- /dev/null	Thu Jan 01 00:00:00 1970 +0000
+++ b/inc/core/MicroBitConfig.h	Thu Apr 07 01:33:22 2016 +0100
@@ -0,0 +1,373 @@
+/*
+The MIT License (MIT)
+
+Copyright (c) 2016 British Broadcasting Corporation.
+This software is provided by Lancaster University by arrangement with the BBC.
+
+Permission is hereby granted, free of charge, to any person obtaining a
+copy of this software and associated documentation files (the "Software"),
+to deal in the Software without restriction, including without limitation
+the rights to use, copy, modify, merge, publish, distribute, sublicense,
+and/or sell copies of the Software, and to permit persons to whom the
+Software is furnished to do so, subject to the following conditions:
+
+The above copyright notice and this permission notice shall be included in
+all copies or substantial portions of the Software.
+
+THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
+IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
+FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL
+THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
+LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING
+FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER
+DEALINGS IN THE SOFTWARE.
+*/
+
+/**
+  * Compile time configuration options for the micro:bit runtime.
+  */
+
+#ifndef MICROBIT_CONFIG_H
+#define MICROBIT_CONFIG_H
+
+#include "mbed.h"
+
+//
+// Memory configuration
+//
+
+// The start address of usable RAM memory.
+#ifndef MICROBIT_SRAM_BASE
+#define MICROBIT_SRAM_BASE                      0x20000008
+#endif
+
+// Physical address of the top of SRAM.
+#ifndef MICROBIT_SRAM_END
+#define MICROBIT_SRAM_END                       0x20004000
+#endif
+
+// The end address of memory normally reserved for Soft Device.
+#ifndef MICROBIT_SD_LIMIT
+#define MICROBIT_SD_LIMIT                       0x20002000
+#endif
+
+// The physical address in memory of the Soft Device GATT table.
+#ifndef MICROBIT_SD_GATT_TABLE_START
+#define MICROBIT_SD_GATT_TABLE_START            0x20001900
+#endif
+
+// Physical address of the top of the system stack (on mbed-classic this is the top of SRAM)
+#ifndef CORTEX_M0_STACK_BASE
+#define CORTEX_M0_STACK_BASE                    MICROBIT_SRAM_END
+#endif
+
+// Amount of memory reserved for the stack at the end of memory (bytes).
+#ifndef MICROBIT_STACK_SIZE
+#define MICROBIT_STACK_SIZE                     2048
+#endif
+
+// Physical address of the end of mbed heap space.
+#ifndef MICROBIT_HEAP_END
+#define MICROBIT_HEAP_END                       (CORTEX_M0_STACK_BASE - MICROBIT_STACK_SIZE)
+#endif
+
+// Enables or disables the MicroBitHeapllocator. Note that if disabled, no reuse of the SRAM normally
+// reserved for SoftDevice is possible, and out of memory condition will no longer be trapped...
+// i.e. panic() will no longer be triggered on memory full conditions.
+#ifndef MICROBIT_HEAP_ALLOCATOR
+#define MICROBIT_HEAP_ALLOCATOR                 1
+#endif
+
+// Block size used by the allocator in bytes.
+// n.b. Currently only 32 bits (4 bytes) is supported.
+#ifndef MICROBIT_HEAP_BLOCK_SIZE
+#define MICROBIT_HEAP_BLOCK_SIZE                4
+#endif
+
+// The proportion of SRAM available on the mbed heap to reserve for the micro:bit heap.
+#ifndef MICROBIT_NESTED_HEAP_SIZE
+#define MICROBIT_NESTED_HEAP_SIZE               0.75
+#endif
+
+// If defined, reuse any unused SRAM normally reserved for SoftDevice (Nordic's memory resident BLE stack) as heap memory.
+// The amount of memory reused depends upon whether or not BLE is enabled using MICROBIT_BLE_ENABLED.
+// Set '1' to enable.
+#ifndef MICROBIT_HEAP_REUSE_SD
+#define MICROBIT_HEAP_REUSE_SD                  1
+#endif
+
+// The amount of memory allocated to Soft Device to hold its BLE GATT table.
+// For standard S110 builds, this should be word aligned and in the range 0x300 - 0x700.
+// Any unused memory will be automatically reclaimed as HEAP memory if both MICROBIT_HEAP_REUSE_SD and MICROBIT_HEAP_ALLOCATOR are enabled.
+#ifndef MICROBIT_SD_GATT_TABLE_SIZE
+#define MICROBIT_SD_GATT_TABLE_SIZE             0x300
+#endif
+
+//
+// Fiber scheduler configuration
+//
+
+// Scheduling quantum (milliseconds)
+// Also used to drive the micro:bit runtime system ticker.
+#ifndef SYSTEM_TICK_PERIOD_MS
+#define SYSTEM_TICK_PERIOD_MS                   6
+#endif
+
+//
+// Message Bus:
+// Default behaviour for event handlers, if not specified in the listen() call
+//
+// Permissable values are:
+//   MESSAGE_BUS_LISTENER_REENTRANT
+//   MESSAGE_BUS_LISTENER_QUEUE_IF_BUSY
+//   MESSAGE_BUS_LISTENER_DROP_IF_BUSY
+//   MESSAGE_BUS_LISTENER_IMMEDIATE
+
+#ifndef EVENT_LISTENER_DEFAULT_FLAGS
+#define EVENT_LISTENER_DEFAULT_FLAGS            MESSAGE_BUS_LISTENER_QUEUE_IF_BUSY
+#endif
+
+//
+// Maximum event queue depth. If a queue exceeds this depth, further events will be dropped.
+// Used to prevent message queues growing uncontrollably due to badly behaved user code and causing panic conditions.
+//
+#ifndef MESSAGE_BUS_LISTENER_MAX_QUEUE_DEPTH
+#define MESSAGE_BUS_LISTENER_MAX_QUEUE_DEPTH    10
+#endif
+
+//
+// Core micro:bit services
+//
+
+// To reduce memory cost and complexity, the micro:bit allows components to register for
+// periodic callback events during interrupt context, which occur every scheduling quantum (FIBER_TICK_PERIOD_MS)
+// This defines the maximum size of interrupt callback list.
+#ifndef MICROBIT_SYSTEM_COMPONENTS
+#define MICROBIT_SYSTEM_COMPONENTS              10
+#endif
+
+// To reduce memory cost and complexity, the micro:bit allows components to register for
+// periodic callback events when the processor is idle.
+// This defines the maximum size of the idle callback list.
+#ifndef MICROBIT_IDLE_COMPONENTS
+#define MICROBIT_IDLE_COMPONENTS                6
+#endif
+
+//
+// BLE options
+//
+// The BLE stack is very memory hungry. Each service can therefore be compiled in or out
+// by enabling/disabling the options below.
+//
+// n.b. The minimum set of services to enable over the air programming of the device will
+// still be brought up in pairing mode regardless of the settings below.
+//
+
+// Enable/Disable BLE during normal operation.
+// Set '1' to enable.
+#ifndef MICROBIT_BLE_ENABLED
+#define MICROBIT_BLE_ENABLED                    1
+#endif
+
+// Enable/Disable BLE pairing mode mode at power up.
+// Set '1' to enable.
+#ifndef MICROBIT_BLE_PAIRING_MODE
+#define MICROBIT_BLE_PAIRING_MODE               1
+#endif
+
+// Enable/Disable the use of private resolvable addresses.
+// Set '1' to enable.
+// n.b. This is known to be a feature that suffers compatibility issues with many BLE central devices.
+#ifndef MICROBIT_BLE_PRIVATE_ADDRESSES
+#define MICROBIT_BLE_PRIVATE_ADDRESSES          0
+#endif
+
+// Convenience option to enable / disable BLE security entirely
+// Open BLE links are not secure, but commonly used during the development of BLE services
+// Set '1' to disable all secuity
+#ifndef MICROBIT_BLE_OPEN
+#define MICROBIT_BLE_OPEN                       0
+#endif
+
+// Configure for open BLE operation if so configured
+#if (MICROBIT_BLE_OPEN == 1)
+#define MICROBIT_BLE_SECURITY_LEVEL             SECURITY_MODE_ENCRYPTION_OPEN_LINK
+#define MICROBIT_BLE_WHITELIST                  0
+#define MICROBIT_BLE_ADVERTISING_TIMEOUT        0
+#define MICROBIT_BLE_DEFAULT_TX_POWER           6
+#endif
+
+
+// Define the default, global BLE security requirements for MicroBit BLE services
+// May be one of the following options (see mbed's SecurityManager class implementaiton detail)
+// SECURITY_MODE_ENCRYPTION_OPEN_LINK:      No bonding, encryption, or whitelisting required.
+// SECURITY_MODE_ENCRYPTION_NO_MITM:        Bonding, encyption and whitelisting but no passkey.
+// SECURITY_MODE_ENCRYPTION_WITH_MITM:      Bonding, encrytion and whitelisting with passkey authentication.
+//
+#ifndef MICROBIT_BLE_SECURITY_LEVEL
+#define MICROBIT_BLE_SECURITY_LEVEL             SECURITY_MODE_ENCRYPTION_WITH_MITM
+#endif
+
+// Enable/Disable the use of BLE whitelisting.
+// If enabled, the micro:bit will only respond to connection requests from
+// known, bonded devices.
+#ifndef MICROBIT_BLE_WHITELIST
+#define MICROBIT_BLE_WHITELIST                  1
+#endif
+
+// Define the period of time for which the BLE stack will advertise (seconds)
+// Afer this period, advertising will cease. Set to '0' for no timeout (always advertise).
+#ifndef MICROBIT_BLE_ADVERTISING_TIMEOUT
+#define MICROBIT_BLE_ADVERTISING_TIMEOUT        0
+#endif
+
+// Defines default power level of the BLE radio transmitter.
+// Valid values are in the range 0..7 inclusive, with 0 being the lowest power and 7 the highest power.
+// Based on trials undertaken by the BBC, the radio is normally set to its lowest power level
+// to best protect children's privacy.
+#ifndef MICROBIT_BLE_DEFAULT_TX_POWER
+#define MICROBIT_BLE_DEFAULT_TX_POWER           0
+#endif
+
+// Enable/Disable BLE Service: MicroBitDFU
+// This allows over the air programming during normal operation.
+// Set '1' to enable.
+#ifndef MICROBIT_BLE_DFU_SERVICE
+#define MICROBIT_BLE_DFU_SERVICE                1
+#endif
+
+// Enable/Disable BLE Service: MicroBitEventService
+// This allows routing of events from the micro:bit message bus over BLE.
+// Set '1' to enable.
+#ifndef MICROBIT_BLE_EVENT_SERVICE
+#define MICROBIT_BLE_EVENT_SERVICE              1
+#endif
+
+// Enable/Disable BLE Service: MicroBitDeviceInformationService
+// This enables the standard BLE device information service.
+// Set '1' to enable.
+#ifndef MICROBIT_BLE_DEVICE_INFORMATION_SERVICE
+#define MICROBIT_BLE_DEVICE_INFORMATION_SERVICE 1
+#endif
+
+//
+// Accelerometer options
+//
+
+// Enable this to read 10 bits of data from the acclerometer.
+// Otherwise, 8 bits are used.
+// Set '1' to enable.
+#ifndef USE_ACCEL_LSB
+#define USE_ACCEL_LSB                           0
+#endif
+
+//
+// Display options
+//
+
+// Selects the matrix configuration for the display driver.
+// Known, acceptable options are:
+//
+#define MICROBUG_REFERENCE_DEVICE               1
+#define MICROBIT_3X9                            2
+#define MICROBIT_SB1                            3
+#define MICROBIT_SB2                            4
+
+#ifndef MICROBIT_DISPLAY_TYPE
+#define MICROBIT_DISPLAY_TYPE                   MICROBIT_SB2
+#endif
+
+// Selects the minimum permissable brightness level for the device
+// in the region of 0 (off) to 255 (full brightness)
+#ifndef MICROBIT_DISPLAY_MINIMUM_BRIGHTNESS
+#define MICROBIT_DISPLAY_MINIMUM_BRIGHTNESS     1
+#endif
+
+// Selects the maximum permissable brightness level for the device
+// in the region of 0 (off) to 255 (full brightness)
+#ifndef MICROBIT_DISPLAY_MAXIMUM_BRIGHTNESS
+#define MICROBIT_DISPLAY_MAXIMUM_BRIGHTNESS     255
+#endif
+
+// Selects the default brightness for the display
+// in the region of zero (off) to 255 (full brightness)
+#ifndef MICROBIT_DISPLAY_DEFAULT_BRIGHTNESS
+#define MICROBIT_DISPLAY_DEFAULT_BRIGHTNESS     MICROBIT_DISPLAY_MAXIMUM_BRIGHTNESS
+#endif
+
+// Selects the default scroll speed for the display.
+// The time taken to move a single pixel (ms).
+#ifndef MICROBIT_DEFAULT_SCROLL_SPEED
+#define MICROBIT_DEFAULT_SCROLL_SPEED           120
+#endif
+
+// Selects the number of pixels a scroll will move in each quantum.
+#ifndef MICROBIT_DEFAULT_SCROLL_STRIDE
+#define MICROBIT_DEFAULT_SCROLL_STRIDE          -1
+#endif
+
+// Selects the time each character will be shown on the display during print operations.
+// The time each character is shown on the screen  (ms).
+#ifndef MICROBIT_DEFAULT_PRINT_SPEED
+#define MICROBIT_DEFAULT_PRINT_SPEED            400
+#endif
+
+//Configures the default serial mode used by serial read and send calls.
+#ifndef MICROBIT_DEFAULT_SERIAL_MODE
+#define MICROBIT_DEFAULT_SERIAL_MODE            SYNC_SLEEP
+#endif
+
+
+//
+// Panic options
+//
+
+// Enable this to invoke a panic on out of memory conditions.
+// Set '1' to enable.
+#ifndef MICROBIT_PANIC_HEAP_FULL
+#define MICROBIT_PANIC_HEAP_FULL                1
+#endif
+
+//
+// Debug options
+//
+
+// Enable this to route debug messages through the USB serial interface.
+// n.b. This also disables the user serial port 'uBit.serial'.
+// Set '1' to enable.
+#ifndef MICROBIT_DBG
+#define MICROBIT_DBG                            0
+#endif
+
+// Enable this to receive diagnostic messages from the heap allocator via the USB serial interface.
+// n.b. This requires MICROBIT_DBG to be defined.
+// Set '1' to enable.
+#ifndef MICROBIT_HEAP_DBG
+#define MICROBIT_HEAP_DBG                       0
+#endif
+
+// Versioning options.
+// We use semantic versioning (http://semver.org/) to identify differnet versions of the micro:bit runtime.
+// Where possible we use yotta (an ARM mbed build tool) to help us track versions.
+// if this isn't available, it can be defined manually as a configuration option.
+//
+#ifndef MICROBIT_DAL_VERSION
+#define MICROBIT_DAL_VERSION                    "unknown"
+#endif
+
+
+//
+// Helper macro used by the micro:bit runtime to determine if a boolean configuration option is set.
+//
+#define CONFIG_ENABLED(X) (X == 1)
+#define CONFIG_DISABLED(X) (X != 1)
+
+#if CONFIG_ENABLED(MICROBIT_HEAP_ALLOCATOR)
+#include "MicroBitHeapAllocator.h"
+#endif
+
+#if CONFIG_ENABLED(MICROBIT_DBG)
+extern RawSerial* SERIAL_DEBUG;
+#endif
+
+#endif