Christian Dupaty / TextLCD_chinese_version

C.Dupaty 03-2018 test on NUCLEO STM32-F411RE LCD 2x16, I2C interface Chinese model, adress I2C=0x4E (search on AliExpress for IIC/I2C 1602 Module) Important ! configure in TextLCD_Config.h : Valid only one of the lines : #define DFROBOT 0 // chinese OK #define YWROBOT 0 // chinese 0K #define SYDZ 1 // chinese OK Font is the same as http://www.farnell.com/datasheets/2362518.pdf

Fork of TextLCD by Wim Huiskamp

/* Hello World! for the TextLCD Enhanced Library C.Dupaty 03-2018 test on NUCLEO STM32-F411RE LCD 2x16, I2C interface Chinese model, adress I2C=0x4E (search on AliExpress for IIC/I2C 1602 Module) Important ! configure in TextLCD_Config.h : Valid only one of the lines :

  1. define DFROBOT 0 chinese OK
  2. define YWROBOT 0 chinese 0K
  3. define SYDZ 1 chinese OK Font is the same as http://www.farnell.com/datasheets/2362518.pdf
  • /

Diff: TextLCD.h

Revision:
7:44f34c09bd37
Parent:
6:e4cb7ddee0d3
Child:
8:03116f75b66e
--- a/TextLCD.h	Tue Nov 23 14:26:19 2010 +0000
+++ b/TextLCD.h	Sat Dec 04 11:29:57 2010 +0000
@@ -33,7 +33,7 @@
  * #include "mbed.h"
  * #include "TextLCD.h"
  * 
- * TextLCD lcd(p10, p12, p15, p16, p29, p30); // rs, e, d0-d3
+ * TextLCD lcd(p10, p12, p15, p16, p29, p30); // rs, e, d4-d7
  * 
  * int main() {
  *     lcd.printf("Hello World!\n");
@@ -55,10 +55,10 @@
      *
      * @param rs    Instruction/data control line
      * @param e     Enable line (clock)
-     * @param d0-d3 Data lines
+     * @param d4-d7 Data lines for using as a 4-bit interface
      * @param type  Sets the panel size/addressing mode (default = LCD16x2)
      */
-    TextLCD(PinName rs, PinName e, PinName d0, PinName d1, PinName d2, PinName d3, LCDType type = LCD16x2);
+    TextLCD(PinName rs, PinName e, PinName d4, PinName d5, PinName d6, PinName d7, LCDType type = LCD16x2);
 
 #if DOXYGEN_ONLY
     /** Write a character to the LCD