Christian Dupaty / Mbed OS ESP8266_HelloMQTT_Mosquitto_STM32

Simple demo with GPIO MQTT protocol test on STM32 broker tests.mosquitto.org WIFI interface ESP8266 Issue of topic0 by pressing the button If reception of ', switching of the led If received from 'q' end of program

Dependencies:   MQTT

main.cpp

Committer:
icraggs
Date:
2014-02-04
Revision:
0:0cae29831d01
Child:
1:a1d5c7a6acbc

File content as of revision 0:0cae29831d01:

#include "mbed.h"
#include "EthernetInterface.h"
#include "C12832_lcd.h"

#include "MQTTPacket.h"


DigitalOut myled(LED2);
C12832_LCD lcd;

int publish()
{
    MQTTPacket_connectData data = MQTTPacket_connectData_initializer;
    int rc = 0;
    char buf[200];
    int buflen = sizeof(buf);
    TCPSocketConnection mysock; 
    MQTTString topicString = MQTTString_initializer;
    char* payload = "I'm alive!";
    int payloadlen = strlen(payload);
    int len = 0;
    
    mysock.connect("m2m.eclipse.org", 1883);
          
    data.clientID.cstring = "mbed test client - Ian Craggs";
    data.keepAliveInterval = 20;
    data.cleansession = 1;
    data.MQTTVersion = 3;

    len = MQTTSerialize_connect(buf, buflen, &data);

    topicString.cstring = "mbed NXP LPC1768";
    len += MQTTSerialize_publish(buf + len, buflen - len, 0, 0, 0, 0, topicString, payload, payloadlen);

    len += MQTTSerialize_disconnect(buf + len, buflen - len);

    rc = 0;
    while (rc < len)
    {
        int rc1 = mysock.send(buf, len);
        if (rc1 == -1)
        {
            lcd.printf("Send failed\n");
            break;
        }
        else
            rc += rc1;
    }
    if (rc == len)
        lcd.printf("Send succeeded\n");
    wait(0.2);

    return 0;
}

int main() {
    EthernetInterface eth;
    eth.init(); //Use DHCP
    eth.connect();
    lcd.printf("IP Address is %s\n", eth.getIPAddress());
    
    while(1) {
        myled = 1;
        publish();
        wait(0.2);
        myled = 0;
        publish();
        wait(0.2);
    }
    
    eth.disconnect();
}